I am wanting to install my W8 O/S onto a 64GB SSD drive. I just want to use this for boot purposes and to fit some programs on as well. Everything else I am wanting to have stored on a 1TB WD Black drive. I want to point my libraries (Docs, Music, pictures) towards the 1TB drive. How do I do this?
I have Samsung Laptop with Windows 8 installed. I have 2 partitions 200 GB and the rest whole drive as C drive which after recovery drive amounts to be around 700 GB. Yesterday, I tried Samsung Recovery to get a factory image of C drive. Firstly recovery failed twice and then the third attempt worked almost fine. Recovery said boot file was corrupted and it recovered. But when I opened my computer I had two drives, 60 GB and 200GB. The rest of the space wasnt there. I checked in disc management, Partitions map said C drive had 700 GB. But in the description it shows only 60 GB. The other partition 200 GB is intact. I tried doing samsung recovery again and again but the problem persists.
Windows 8.1 failing to boot when any usb storage drive is plugged in during boot. My only solution is to unplug everything each boot unless I use my KVM switch which does not support usb 3.0.
I'm running Win 8 Pro which is installed on my SSD and I need to remove my secondary drive and connect it to another PC. When I do this, I get a boot error. Why an error shows up especially when it is not a boot drive.
Error and My Disk Management information is attached as an image to this message.
C: is the SSD and K: is my PATA drive which I want to move.
I have three hard drives. One is a Kingston Hyperx SSD 120GB. The other two are for internal storage and are WD 500GB Blacks. I recently upgraded my computer. My new mother board is the ASUS M5A99X. I installed Windows 8 just fine back in Dec 2012 and it worked up until April-Mayish. My USB Hub was causing my computer to halt before POST. After exchanging it with a new hub, I was able to boot just fine.
Later that same day, I cleaned out the dust in my computer and added another harddrive. I wasn't able to boot Windows 8. It would just stop with a blinking cursor right before it should show the four blue panes. I went into BIOS and it didn't have my SSD listed. I accidentally unplugged the SATA cable for my SSD and forgot to plug it back in. After I plugged it back in I set the boot priority back to my SSD first.
I still couldn't boot so inserted my Windows CD to reformat. After it says "Press any key to boot from CD...." I didn't press anything and it loaded into Windows just fine. I loaded Windows this way for a while until I was able to troubleshoot it. After reformatting, I get "Please select proper boot device.." message. If I put the CD in, that goes away and it loads into windows after saying "Press any key to boot from the CD..." Here's what I've done to troubleshoot so far:
1. Set SSD to first in boot priority order in BIOS. Forced boot to my SSD in BIOS. Changed SATA from AHCI to RAID (lol) to IDE.
I've used bootrec.exe and tried bootrec /RebuildBcdbootrec /fixMbrbootrec /fixboot This still didn't resolve my issue.
2. I flashed my BIOS to 1708 because it was going to fix an issue I had with a USB device.
3. I reformatted Windows 8 with all drives unplugged except my SSD.
4. I've unplugged all SATA devices except my harddrive and tried to boot.
5. I've set the 2nd partition (90+GB) to active partition on my SSD.
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
I have a 2TB Western Digital My Book Essentials, it's filled with tons of old photos, movies, docs, games, and I'm scared to think of what else. The SATA to USB connector broke on it, so I took the drive apart and put it inside my computer. I opened up device manager because it wasn't showing up automatically and the 2TB is showing up as unallocated, I'm freaking out now because I'm scared the data was somehow deleted.What do I do?
edit: I realize also this isn't directly related to Windows 8 (besides the fact it's the OS I'm on), but I don't know where else to post it. I'd also like to say that I had a really deep feeling the drive was going to break continually for about two weeks before it happened, so if you have a similar feeling about something, don't ignore it!
When I go to Computer Management my main (OS) drive shows as "Disk 1" and my 2nd internal data drive shows as "Disk 0". Should I switch the SATA cables so that the main drive will show as "Disk 0 and the 2nd internal drive as "Disk 1"?
I have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.
I got this new Asus Transformer which is a Windows 8.1 system.
I made a few images with Macrium Reflect and created an UEFI recovery Flash Drive (with Macrium) for the Macrium recovery program. I can set the BIOS to boot from the stick (in the temporary or permanent BIOS settings). Problem is, when I hit Enter, it ignores the stick and boots directly into 8.1.
Is there another setting in the BIOS that I have to make in order to have it boot from the stick.
She also bought an external USB DVD burner.I created a bootable Macrium Rescue disc so we can restore from a Backup Image if needed.The laptop won't boot from the USB DVD drive and gets a "blocked by the current security policy" error.
How can I boot from an external USB drive? Is there a setting in BIOS that will allow booting from the DVD?
I found this thread in the Lenovo forum for a different model that mentions "turn off secure boot", if it's an available option.
When I installed Win8 (at this point, updated to Win8.1 Update) on drive V:, it changed it to C:. Since I'm used to the drive letters as they used to be, I'd like to change it back to V:. I figure I'll have to change all the registry entries for installed programs from C: to V:.
How to confirm that I'll have to manually make those registry changes?
I cannot boot from my CD-DVD drive even after I turn OFF Secure Boot and UEFI. Then, yes, my machine DOES list my CD-DVD as a boot option, but when I actually try to boot from the CD-DVD, I get an error message. (Optiplex 7010 Mini-Tower with Win 8 Pro 64-bit, 8 GB RAM, 500 GB hard drive and an Intel i5 3470 processor. It has BIOS version A16.)
I have a good, detailed thread on this issue in Desktop Hardware Forum: [URL] ....
I just purchased an XPS 8500 with Windows 8 (NOT Pro). I want to use a 120GB SSD drive as the boot drive. I tried using the Dell Backup & Restore function to put the system image on the SSD.
However, the HDD that came with the PC is 2TB. When I go to install the image on the SSD, I get an error message that the SSD is too small.
Do I need to (order and then) use a Windows 8 install disk?
I have a laptop that has an SSD with Win 8.1 + programs, and an HDD for projects. They are both formatted GPT. When I launch Macrium, for some reason my SSD is now GPT 1 and the second drive is now GPT 2. This is confusing because I'm used to imaging the top line of partitions which is usually my OS. Now that the GPT numbers are reversed, I have to be careful when doing my backups. How to change this assignment so that the SSD will be GPT1 again?
I'm in the process of moving to an SSD and need to create a backup drive in order to repair the BIOS after transferring everything. However, when I try to create one - the create a recovery drive program won't recognize the flash drive I have connected as a flash drive.
I first tried with a SanDisk Cruzer which apparently had a quirk in that it shows up as a hard drive instead of removable flash drive. That seems to be well documented on forums all over the place and there is no fix.
So, I purchased a cheap 8 GB stick (no brand) and Windows (I'm running 8.1 x64) recognizes it as a removable disk. However, the create a backup utility still won't recognize it. I've found some random fixes that have worked for some (such as plugging it into a different USB port) but nothing has worked for me so far. I've tried doing it with the "copy the recovery partition" option both checked and unchecked.
If there's no solution to this wonderful "quirk" of Windows, then is there something else I can do to repair BIOS? Seems like there's not a fix to my problem out there...
EDIT So as of right now, I tried using HPs recovery software which seems to do the same thing as copying over your entire recovery partition. That didn't work either. However..when I had both USB sticks plugged in the Windows supplied utility recognized the SanDisk Cruzer when I checked the "copy the partition" thing
I know there is good software out there to clone/image my hard drive and restore it to a new SSD drive. I'm just wondering though, since my laptop is brand new, I made a full recovery to a USB drive and included the OEM recovery partition.
Couldn't I just swap out the old HDD with the new SSD and boot with the recovery stick and do a full recovery back to the new SSD?
Also, however I do this, recover or image backup/restore, do I need to do some type of SSD alignment? I can't find a clear answer on that.
I just purchased an Asus R510CC notebook with windows 8 and I bought a SSD drive to replace the current one.
I used Recovery Drive in Windows to create an USB boot drive with the recovery partition on it. I then installed the SSD and booted from the USB. When I get to the option to reset my computer I encounter an error with the following message: "Unable to reset PC. A required drive partition is missing". I already did a bit of research and BIOS tweaking but I can't install Windows onto my SSD.
When booting from his new SSD boot drive, Leo will end up with "errors" on the hard drives that need to be "fixed" IF he accesses any libraries that he set up on his old hard drive still is the computer.
My friend Leo, installed and boots from an SSD I gave him. He loves it. He also like that he can still boot from his old hard drive. If he accesses something via the library links that he had set up tho, it causes Windows 8 to report disk errors on boot that need to be fixed.
How would Leo go about disabling the libraries that he has set up? And is this the real issue for the errors? (Leo says that that he gets no errors unless he accesses something via the libraries).
If I add a SSD (Crucial MX100 CT256MX100SSD1 2.5" 256GB SATA III MLC Internal Solid State Drive). Can I use it as the boot drive as well as the backup drive? Then use the existing 1TB HDD as the main storage drive. I need a backup drive so I figure if this works then it could give me a performance boost as well. How could this best be done to satisfy both needs? Would I put all the programs on the SSD and all the data on the HDD? My current drive is at 119GB used space. How do I determine how much back up space is needed?
I am planning on building a new computer, and I want to put a 250GB SSD (Samsung 840 EVO) in it to use with 8.1 Pro. However, most of the programs and data I need are still on the old computer's boot drive, specifically all of my STEAM games (none of which I have the DVDs for.)
My question is if I can create symlinks to the old boot drive without losing data on it. This will most likely be a temporary measure, as the drive's a fairly slow 5900RPM Barracuda, and I want something faster, but I can't afford a better one just yet...
Had, and still have installed in machine, an SSD with Windows 7 as OS Had, and still have, a Western Digital 2 TB external HD attached. It was used as back up for the original set up. This also has the Smart Ware software installed but which I have not used.
Tried a dual boot on a new SSD using Windows 8.1 recently but turned out ot be a pain so I simply installed 8.1 on new disk.
When I boot and Windows 8.1 starts, window showing the external hard drive and contents appears. How can I stop this?
I am planning to reformat this external storage and redo the back up using the new 8.1 OS and current content of the my other HDD containing our data, will this likely stop the "pop-up" on start?
I have this identical problem mentioned here : Scanning and repairing volume (?Volume...) on startup
I think it has something to do with my deleting the 'system reserved' 350mb partition when I reinstalled Windows 8. I don't want it showing in My Computer and when I go into Disk Management and give it a drive letter, this message goes away on boot. But, since I can't merge this very small partition with any other drive, I'm not sure how to not show this drive and not get the scanning message on boot up.
This screen appears on every boot followed by long error number that i could never got the time to read or even capture it. Some times this screen stays for very long time and cancel button just doesn't work.
I have a couple of 4GB usb pen drives and a 16 GB ADATA one.
When I want to boot from the Linux I have installed in the pen drive, do I have to go to F2, enter the bios and set it to boot from USB or can I tap F12 and do it that way. I have used the 3 major installers, Linux Live USB installer, UNetbootin and USB Universal Installer and cannot get Ubuntu or any distro to boot from this drive. I have formatted it as FAT 32 not NTFS.
I had some success booting from the 4GB pen drives with some distros but not always.
I installed Zorin OS which was great but it started to ask for a password which was never mentioned in the process so I had to delete it.
The question is, am I booting wrong to be making so many errors? I have a Win 8.1 OS with 6 GB ram.
I have 3 4GB pen drives and a 16 GB drive. The 16 is an ADATA and the others are Sandisk.
All I want is a live USB with persistence for updates. I found Ubuntu the easiest and Zorin equal to it except for the password issue.