Setup Installation :: Migrating Windows 8 To SSD While Maintaining Drive Letter?

Jan 14, 2013

I just recently built a new Windows 8 machine. Since I knew I was going to be getting an SSD down the road, I planned ahead:

Nutshell, the C: drive, the boot drive, is at the end of the partition, sized to 220 DB, so I knew it would be smaller than the 240/256GB drive I knew I'd eventually be getting. The Users folder is on the D: drive, so the C: partition is only the OS and apps. Everything's dandy.

I found EasyBCD and used it to move the boot manager over into the C: partition, so theoretically that's all I need to move over to the new drive. So what I want to do is move the C: partition over to the SSD, have it stay C: once it's there, and then have it boot into that partition. (Note that I cannot disconnect the hard drive when it's time to reboot because that's where the Users folder lives and I don't want to break that.)

I keep running into problems with the "keeping it C" part. When I clone the drive over, the old drive stays as C: (as you would expect), and the new drive gets a new letter. Attempts to change those letters using DISKPART from the Win 8 install DVD have been either futile or disastrous.

I've been using the free version of Macrium as my cloning / imaging tool...is there a better free tool I should be using?

View 4 Replies


ADVERTISEMENT

Setup Installation :: Windows 8 / 7 Drive Letter

Jan 11, 2013

Alright, I just installed my Windows 8 Pro from a USB drive as I was installing it I was installing Windows 8 on the W:/ drive but once it was installed I came to found out that that My C:/ drive which was originally Windows 7's drive letter now belongs to Windows 8, and now the drive that is now Windows 7's is D:/ is is possible to change it back a W: drive or something? and yes, Windows 7 is the main partition on the system, I'm not sure why it changed but it's actually the first time this has happened.

View 1 Replies View Related

Setup Installation :: Migrating Windows 7 And 8 From BIOS To UEFI Computer

Jun 13, 2013

Question: How would you approach this migration?

I just bought a copy of Acronis True Image 2013 with Plus Pack. It appears that this is all I need as True Image will install the new motherboard drivers as part of the migration process. But do I stay with MBR or move to GPT?

Presently both Win7 (on a 120GB SSD drive) and Windows 8 (on a different 120GB SSD drive) are both MBR format. I don't want to start over from scratch. That's why I bought the Acronis 2013 with Plus Pack.

View 5 Replies View Related

Setup Installation :: Migrating / Cloning GPT Secure Boot HDD To SDD

Jan 15, 2014

i have a Lenovo Ideapad Z585 running Windows 8, secure boot, gpt paritioning and UEFI bios.The laptop comes with a factory shipped 1TB Sata drive which i want to replace with a Kingston V300 SDD 120GB drive.

I have followed this guide How to Migrate OS to new Hard disk.Ive run this in another desktop, it completes and i shut down, remove the destination and insert it into the laptop - power up and it blue screens with There has been an unexpected error message. Trying to access the recovery partition says it is damaged but looks like its almost going to load. Looking at the drive in EaseUS paritition master the paritions look a perfect copy apart from the proportional sizing.

AHCI is enabled in bios - i've tried EaseUS Backup clone, task was successfull but again blue screens but this time with a attached device cant be found.

One thing i wasnt sure about, the PC i done the cloning in has a RAID stripe setup but not sure if this effects it.Any one had success in cloning a GPT drive over to a SSD?

I cant do a fresh installation of windows 8 as i dont have recovery discs, nor does the onekey recovery software allow me to do so and id like to keep the recovery parition in tact really.

View 7 Replies View Related

Setup Installation :: Migrating / Copying Boot Partition To Another HDD Partition

Jan 30, 2013

I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .

It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .

So I have Drive

1 - Partitions C: ( boot partition ) & D:

Drive 2 - Partitions E: & F:

I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:

I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .

I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.

View 9 Replies View Related

Hardware Drivers :: Hard Drive Not Allow To Change Correct Drive Letter

Mar 5, 2013

I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.

View 3 Replies View Related

How To Change System Drive Letter In Windows 8 RTM

Aug 18, 2012

I've installed Windows 8 starting the installer from Windows 8 RP and I've just noticed that it picked up the drive letters from the old system. Now my system drive is Y instead of C , because in the old system that partition was Y. If I try to change the drive letter in the Drive Management it gives an error. how to change system drive letter in Windows 8 RTM?

View 6 Replies View Related

Windows 8 Partition - Drive Letter Visible In Explorer But No Size Or Contents

Sep 22, 2014

My windows 8 partition is inaccessible. Win 8 won't boot, even after attempted repair and running chkdsk.

This all happened after an automatic update.

I booted to another drive. Windows explorer shows the bad partition letter but no size or contents. Other partitions on the same drive are ok.

I also can see the bad drive contents from a cmd prompt.

View 4 Replies View Related

Can Boot Drive - Currently C Be Changed To Another Letter

Jul 23, 2014

When I installed Win8 (at this point, updated to Win8.1 Update) on drive V:, it changed it to C:. Since I'm used to the drive letters as they used to be, I'd like to change it back to V:. I figure I'll have to change all the registry entries for installed programs from C: to V:.

How to confirm that I'll have to manually make those registry changes?

View 16 Replies View Related

Dell :: Change Drive Letter Assigned To (winretools) Partition On Windows 8 Laptop?

Apr 7, 2013

I'm just going through the process of personalizing a new Inspiron 14z with Windows 8. The one thing that has me stumped are all the partitions that ship installed on the drive, due to a combination of everything being different on Win8, Dell doing things their own way, and GPT formatting.  Generally I would like to know what the heck all those partitions are for, but it's fine if that will be a slow learning process.  Specifically and immediately, I need to change the drive letter assigned to the "WINRETOOLS" partition.  Currently it's D:, and the problem is that for 10 years I've been using D: as my data partition, and quite a  number of applications, configurations, settings, etc. assume that all my files are on D:.  For instance, by having all my music on D:, I can sync iTunes library and preference files between machines, and all ratings and playlists match from one machine to the next.  Same thing for my photos.  Same thing for a bunch of utilities like FTP consoles, sync utilities...

In a prior version of Windows, I would just go into Disk Management, right click the partition in question, assign a different drive letter, and job done.  On my machine, the 2GB WINRETOOL partition doesn't even show as having a drive letter in Disk Management, despite the fact that it's D: in Win Explorer.  Additionally, the only right click option is "help".  I've taken that option, and, despite its aspirations, it's not useful.

How can I change that drive letter to something else?  Should WINRETOOLS even have a drive letter in Explorer (some posts I've seen indicate that it should be hidden)?  If I do manage to change the drive letter, will that break its function, whatever that is?

My machine has a 500GB spinning disk, which has all the aforementioned partitions.  I've shrunk the C: partition to 80GB, in preparation for creating a data partition.  I have not yet formatted the unassigned space as I would like to solve this WINRETOOLS thing first.  Finally, there is a 32GB SSD that I've set up as an Intel Smart Response cache, and it's no longer visible to the OS.

View 3 Replies View Related

Hardware Drivers :: How To Change The Drive Letter From H To G

Apr 1, 2013

When I put my usb in my pc I see on my Computer a new drive letter H:

So now I have: C: D: E:

Floppy: A: and my DVD as F: and a Removeable disk I: but I don't have a any removeable disk on any usb port in my pc.

When I put now my other usb it's assigining it as drive H:

But I need it to be G: since I need to save to it something from a program I saved before and it must be G: not H:

How can I change/force it to be drive letter G: instead H: ?

View 1 Replies View Related

Hardware Drivers :: SSD Partition On C Sys Drive Has No Letter Unallocated

May 16, 2013

My C: is a SSD Id like to have back as one disc, one partition..

The 101 mb 'unallocated' It was previously listed as " reserved system protected drive" I removed and formatted its 101 mb...back to empty, unallocated, can I lose that partition??

It shows up under disc management as a part of c...but really has no drive letter at all it just shows as C:

View 3 Replies View Related

External HD - Can't Select Change Drive Letter And Paths

Jul 27, 2014

I tried to change the drive letter because it wont appear, but it didnt work. I have tried the CMD method with the volumes but the volume did not show up. All I know is that its a G-Technology hard drive. I tried formatting it to NTFS but that wont work. Basically I tried everything and nothing works. P.S The drive is Disk1...

View 2 Replies View Related

Hardware Drivers :: Drive Letter Disappears After Restart

Mar 12, 2013

I have a windows to go installation in a large external hdd, so I have made a second partition to use as data storage.

Now, when I insert the disk on my "normal" windows installation I would expect the data partition to be available... Instead I have to assign a letter to be able to use it.

The disk appears to be online and once assigned a letter you can unplug it and plug it again without having to do the letter assignment again.

BUT, every time I restart the pc I have to do it all over again.

View 5 Replies View Related

Dual Boot Win7 / Win 8 - Drive Letter Dynamically Changing

Apr 16, 2013

I have an SSD drive with 2 partitions on it. 1st partition has Win 7 on it as drive letter C. 2nd Partition has Win 8 on it as Drive letter W. At 1 point in time if I booted to Win 8 the drive letter would dynamically change from drive letter W to Drive letter C and make Win 7 drive letter W. The revers was true if I booted to Win 7. Something has changed somewhere, where this dynamic drive letter changing is no longer working. When I boot to Win 8 the drive letter remains to be drive letter W & Win 7 is still drive C. This is causing problems when I'm booted to Win 8 with regard to installing & using apps while in Win 8 since the C drive is really the Win 7 system drive.

How can I fix this to get back the dynamic flip flopping of drive C? I confess to being somewhat ignorant when dealing with this particular area of things.

View 4 Replies View Related

Hardware Drivers :: Data Partitions Had No Drive Letter Assigned

Mar 13, 2013

This morning, my laptop wouldn't boot and I got a message saying I needed to use the recovery disk to fix the problem. A little investigating using the command prompt from that disk revealed my system and data partitions had no drive letter assigned to them. A little work with Diskpart fixed that but left me wondering what would have caused them to disappear.

View 1 Replies View Related

Hardware Drivers :: Seagate USB 3.0 Backup Unit Doesn't Get Drive Letter

Jul 23, 2014

That is, I can allocate it one through drive management but it still doesn't show next switch on in My Computer, so I must go in an allocate it one. Otherwise it works fine. Bit tedious after a while.

Do I have to reformat it completely to regain auto allocation of a letter?

Used to be fine, but not now. A USB 3.0 Toshiba 500 gig external drive (sealed unit) doesn't have this problem.

View 9 Replies View Related

Hardware Drivers :: Auto Assign Drive Letter Don't Work Anymore?

Nov 14, 2013

After last "patch-tuesday" my Windows 8.1 don't assign drive letters to hotswaped HDD's and USB keys.

When starting my backupdrive (eSATA), it is now without a drive letter, I can give it one though in disk-management, but before last tuesday, it was given a letter automatic. Same problem when I connect an USB-HDD or an USB-stick.

Is there a way to get back "autoassign of a drive letter"? (don't know the correct word for this function in English).

View 3 Replies View Related

Setup Installation :: Windows 8 Core Installation Won't Recognize Hard Drive

Sep 15, 2014

I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?

View 1 Replies View Related

Setup Installation :: Cannot Install Windows On USB Flash Drive With Setup

Oct 18, 2013

I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.

After a while the following message appears "you cant install windows on a usb flash drive with setup"

I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).

View 2 Replies View Related

Setup Installation :: New Computer - C Drive Too Small / D Drive Wrong Place?

Aug 13, 2014

I have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.

View 2 Replies View Related

Setup Installation :: Resetting PC On New SSD Drive Using Recovery Drive

Jul 16, 2014

I just purchased an Asus R510CC notebook with windows 8 and I bought a SSD drive to replace the current one.

I used Recovery Drive in Windows to create an USB boot drive with the recovery partition on it. I then installed the SSD and booted from the USB. When I get to the option to reset my computer I encounter an error with the following message: "Unable to reset PC. A required drive partition is missing". I already did a bit of research and BIOS tweaking but I can't install Windows onto my SSD.

View 9 Replies View Related

Setup Installation :: Windows 8 And XP On Single PC On C And D Drive

Jan 7, 2014

I want to install windows 8.

currently i am using windows xp on C Drive.

I want to install Windows 8 or windows 8.1 on D Drive.

When i boot the pc will it prompt me to go to Windows xp or Windows 8.

View 2 Replies View Related

Setup Installation :: How To Rename Drive In Windows 8

Aug 21, 2013

I had windows 7 installed on [C:] I then split [C:] into two renaming the other half to [F:] I then installed Windows 8 on [F:] and removed C: and gave the free space back to [F:] Now I just have [F:] and I want to rename it to [C:] but I have been told that you cannot with a system boot partition. Is there any way that I could manipulate the drive.

View 8 Replies View Related

Setup Installation :: Booting Windows 8.1 From CD Drive

Sep 15, 2014

Computer specs, GeForce GTX 760 and i5-4670k CPU. MSI Z97-G45 Gaming Series motherboard. bought this from somebody with no windows installed on it. computer came with no cd's. bought a new copy of windows 8.1. i have the computer hooked up to a 720p hdtv with an hdmi cord. everytime i am hitting enter to boot from the device options it just keeps blinking but it wont boot from device. i think since i am using a tv and not a monitor it may be cutting off some other options on the screen on the bottom that i cant see? or is there something wrong with the computer. i believe the person used the computer before me for about 6 months or so and deleted what ever operating system he had on it before giving it to me. read some stuff about possible uefi bios legacy boot but not sure?

View 1 Replies View Related

Deleting Or Changing Drive Letter On External Data Result In Data Loss?

Dec 6, 2013

I am trying to get my external hard drives setup from a freshly rebooted installed computer. I recently placed an external hard drive with all my back up files on my computer, but this drive is not going to be my main drive. I have two others I will be using as a main hdd and a backup drive that are brand new.

So, the question is, if I were to use a utility like the Windows 8.1 disk management feature to either delete the drive letter or even change it to another one, will that mess up the external hard drive or even lose data? Because until I transfer my files to my backup disk I am afraid of losing my only copy of my files.

View 3 Replies View Related

Setup Installation :: How To Get Preinstalled Windows 8 On New Hard Drive

Nov 28, 2012

I just bought a lenovo Z580 with windows 8 and I also have a new hard drive coming. The first thing I tried to do was create factory restore disks so that when the new hard drive gets here I can remove the old hard drive and replace it with the new one and put the pre-installed windows 8 that came with the laptop on it. I can't however find a way to create factory restore disks. Is this still possible and if not what are my options for replacing a hard drive for this laptop and using the same windows install that originally came with it? I would prefer to not have to clone the hard drive because the new hard drive is an SSD so I will want to install windows with AHCI mode on.

Ultimately, I want to do a clean install of windows 8 on the new laptop using the existing pre-installed windows 8 key. I imagine this would be pretty simple if I had windows 8 install discs but I don't have those either as they didn't come with the laptop. what my options are to make this work?

View 9 Replies View Related

Setup Installation :: No Optical Drive During Install Of Windows 7

Mar 17, 2013

So i had bought a laptop with Windows 8 Pre-installed.

HP Envy 6 1106TX, It doesn't have any CD/DVD Rom or anything. I'm using an external DVDRW

I made my recovery disks and want to do a clean install of Windows 7 on it.

To do this:

I disabled Secure Boot & Legacy something.

Then Set the Boot option to my Optical drive. Finally! the setup started, But as soon as i click on INSTALL NOW At first screen. It doesn't pick up my Optical Drive and says I've to Insert the disk, or choose my USB/CD Drive from the list (which is empty as it doesn't detects it)

2nd thing:I tried installing a clean version of Windows 8. If i enable Secure boot & Legacy. The Optical drive doesn't show up in Boot options to select it as boot. But when i disable it, It detects the drive and the same after the INSTALL NOW screen on windows 8. It says there's no harddrive/optical drive both.

View 1 Replies View Related

Setup Installation :: How To Transfer Windows 8 From One Hard Drive To Another

Apr 16, 2014

I am currently using windows7 in a 1 tb harddrive. I have another internal harddrive that im not using that has windows 8 on it but is only 150gb. How do i bring windows 8 to the 1tb harddrive i am using to replace windows 7?

View 6 Replies View Related

Setup Installation :: Windows 8 Recovery Drive Not Found?

Jul 16, 2014

My Acer Aspire A7600U-UR24 came with windows 8. I made a recovery drive by choosing "create recovery drive" in windows 8. After making the drive i installed windows 8.1 from DVD. Some time later I tried to restore it back to factory with my recovery usb. Every time I try I get "windows cannot find a system image on this computer" even though my flash drive is plugged in. I tried booting from the drive, doesn't seem to work. Not sure if my windows 8.1 version not being activated has anything to do with it (I installed 8.1 on 2 computers from the same dvd didn't realize i couldn't do that) . but I think I should still be able to boot from the drive.

I was thinking if the problem is my flash drive, can I somehow transfer the system image from one flash drive to another?

Here's the screens: at this point there should be an option for windows 8 but there's not.

View 4 Replies View Related

Setup Installation :: Reinstall Windows - Recovery Partition Is On Another Drive

Oct 27, 2013

I purchased a Lenovo laptop with Windows 8 Pro preinstalled. It came with 500 GB HDD. I changed the DVD Rom with SSD/HDD tray to use for additional drive. I put an SSD in there and installed Windows 8 on it using a USB Recovery Drive, which I don't have anymore. So my current setup looks like this:

After upgrading to Windows 8.1, the license of some software I'm using got messed up and I couldn't manage fixing it, so the only option I've got left is to reinstall/reset Windows. But since the Recovery partition is on another drive, when I go about creating a Recovery Drive, the option "Copy the recovery partition from the PC to the recovery drive" is greyed out. I've got stuff on my HDD, which I can't currently backup so I don't wan't to format that drive. I'm perfectly fine with formatting the SSD, that's what I want.

How can I reinstall/reset my Windows? The only option I see is to install Windows on the Hard Drive (by doing a backup and formatting it first), and then create a usb recovery drive and reinstall again on the SSD, but that's a lot of hassle and I'd need to find an external hard drive for the backup.

I intentionally left the Hard Drive in the original bay (as Disk 0) because of the better protection against falling compared to the added bay in place of the DVD drive.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved