I want to install windows 8.
currently i am using windows xp on C Drive.
I want to install Windows 8 or windows 8.1 on D Drive.
When i boot the pc will it prompt me to go to Windows xp or Windows 8.
I only have a Windows 8 Single Language key purchased. They mostly sell that version in my country. But I need to perform a clean install of Windows 8.1. How can I do this? How to get the ISO? I can't install 8.1 PRO ISO with a generic key and they use the SL key to activate right?
View 6 Replies View RelatedI have a powerful dedicated work machine that I want to also use as a play machine.
The idea: Have two separate installations of Windows 8.1 on two separate disks, select which disc to boot to at startup (preferably by dual boot menu, BIOS as a last resort).
I want to know if it's possible to isolate the two installations from one another. The only way I can think to do this is to disable the hard disks from within each independent OS.
For example:
If the "work side" of the computer uses 1x256GB SSD for Boot and 1x1TB SSD for data, and the "play side" has 1x512GB SSD, then from the "work side" OS I could disable the SSD in device manager for the 512GB SSD, and from the "play side" I could disable the 256GB & 1TB SSD's. In theory could I do this? Would that mean that essentially the data on either side would be completely invulnerable from the other side?
Step 2:
Dual boot? Single Boot with BIOS selection?
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
View 1 Replies View RelatedI am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
I have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.
View 2 Replies View RelatedI just purchased an Asus R510CC notebook with windows 8 and I bought a SSD drive to replace the current one.
I used Recovery Drive in Windows to create an USB boot drive with the recovery partition on it. I then installed the SSD and booted from the USB. When I get to the option to reset my computer I encounter an error with the following message: "Unable to reset PC. A required drive partition is missing". I already did a bit of research and BIOS tweaking but I can't install Windows onto my SSD.
Alright, I just installed my Windows 8 Pro from a USB drive as I was installing it I was installing Windows 8 on the W:/ drive but once it was installed I came to found out that that My C:/ drive which was originally Windows 7's drive letter now belongs to Windows 8, and now the drive that is now Windows 7's is D:/ is is possible to change it back a W: drive or something? and yes, Windows 7 is the main partition on the system, I'm not sure why it changed but it's actually the first time this has happened.
View 1 Replies View RelatedI had windows 7 installed on [C:] I then split [C:] into two renaming the other half to [F:] I then installed Windows 8 on [F:] and removed C: and gave the free space back to [F:] Now I just have [F:] and I want to rename it to [C:] but I have been told that you cannot with a system boot partition. Is there any way that I could manipulate the drive.
View 8 Replies View RelatedComputer specs, GeForce GTX 760 and i5-4670k CPU. MSI Z97-G45 Gaming Series motherboard. bought this from somebody with no windows installed on it. computer came with no cd's. bought a new copy of windows 8.1. i have the computer hooked up to a 720p hdtv with an hdmi cord. everytime i am hitting enter to boot from the device options it just keeps blinking but it wont boot from device. i think since i am using a tv and not a monitor it may be cutting off some other options on the screen on the bottom that i cant see? or is there something wrong with the computer. i believe the person used the computer before me for about 6 months or so and deleted what ever operating system he had on it before giving it to me. read some stuff about possible uefi bios legacy boot but not sure?
View 1 Replies View RelatedI just bought a lenovo Z580 with windows 8 and I also have a new hard drive coming. The first thing I tried to do was create factory restore disks so that when the new hard drive gets here I can remove the old hard drive and replace it with the new one and put the pre-installed windows 8 that came with the laptop on it. I can't however find a way to create factory restore disks. Is this still possible and if not what are my options for replacing a hard drive for this laptop and using the same windows install that originally came with it? I would prefer to not have to clone the hard drive because the new hard drive is an SSD so I will want to install windows with AHCI mode on.
Ultimately, I want to do a clean install of windows 8 on the new laptop using the existing pre-installed windows 8 key. I imagine this would be pretty simple if I had windows 8 install discs but I don't have those either as they didn't come with the laptop. what my options are to make this work?
So i had bought a laptop with Windows 8 Pre-installed.
HP Envy 6 1106TX, It doesn't have any CD/DVD Rom or anything. I'm using an external DVDRW
I made my recovery disks and want to do a clean install of Windows 7 on it.
To do this:
I disabled Secure Boot & Legacy something.
Then Set the Boot option to my Optical drive. Finally! the setup started, But as soon as i click on INSTALL NOW At first screen. It doesn't pick up my Optical Drive and says I've to Insert the disk, or choose my USB/CD Drive from the list (which is empty as it doesn't detects it)
2nd thing:I tried installing a clean version of Windows 8. If i enable Secure boot & Legacy. The Optical drive doesn't show up in Boot options to select it as boot. But when i disable it, It detects the drive and the same after the INSTALL NOW screen on windows 8. It says there's no harddrive/optical drive both.
I am currently using windows7 in a 1 tb harddrive. I have another internal harddrive that im not using that has windows 8 on it but is only 150gb. How do i bring windows 8 to the 1tb harddrive i am using to replace windows 7?
View 6 Replies View RelatedMy Acer Aspire A7600U-UR24 came with windows 8. I made a recovery drive by choosing "create recovery drive" in windows 8. After making the drive i installed windows 8.1 from DVD. Some time later I tried to restore it back to factory with my recovery usb. Every time I try I get "windows cannot find a system image on this computer" even though my flash drive is plugged in. I tried booting from the drive, doesn't seem to work. Not sure if my windows 8.1 version not being activated has anything to do with it (I installed 8.1 on 2 computers from the same dvd didn't realize i couldn't do that) . but I think I should still be able to boot from the drive.
I was thinking if the problem is my flash drive, can I somehow transfer the system image from one flash drive to another?
Here's the screens: at this point there should be an option for windows 8 but there's not.
I purchased a Lenovo laptop with Windows 8 Pro preinstalled. It came with 500 GB HDD. I changed the DVD Rom with SSD/HDD tray to use for additional drive. I put an SSD in there and installed Windows 8 on it using a USB Recovery Drive, which I don't have anymore. So my current setup looks like this:
After upgrading to Windows 8.1, the license of some software I'm using got messed up and I couldn't manage fixing it, so the only option I've got left is to reinstall/reset Windows. But since the Recovery partition is on another drive, when I go about creating a Recovery Drive, the option "Copy the recovery partition from the PC to the recovery drive" is greyed out. I've got stuff on my HDD, which I can't currently backup so I don't wan't to format that drive. I'm perfectly fine with formatting the SSD, that's what I want.
How can I reinstall/reset my Windows? The only option I see is to install Windows on the Hard Drive (by doing a backup and formatting it first), and then create a usb recovery drive and reinstall again on the SSD, but that's a lot of hassle and I'd need to find an external hard drive for the backup.
I intentionally left the Hard Drive in the original bay (as Disk 0) because of the better protection against falling compared to the added bay in place of the DVD drive.
I recently upgraded capacity of my hard drive (from 350GB to 500GB). I'm wondering how can I install my windows oem license from my previous hard drive to my new one. My laptop is Compaq Presario CQ58 and OS is Windows 8.
View 9 Replies View RelatedAs Windows to Go is only available for ENTERPRISE versions and booting from a VHD requires there to be an OS already installed on the physical machine I was wondering if we could "Borrow" a trick from Linux.
Is it possible to install a Mini GRUB boot loader on a partition on an external HDD and on a second partition boot a Windows system.
Note here -- I want a RUNNING WINDOWS SYSTEM -- not an install / recovery / "Win PE" type system -- but a full Windows system that will work even if there is NO usable INTERNAL HDD drive in the computer.
Googling shows quite a few ways of either creating an INSTALL disk (HDD) or booting a VHD neither of which are what I want.
Using GRUB and booting an external HDD in theory should work -- and this should "almost replicate" a Windows to Go system.
(I've had an external USB Linux system with VMware player installed -- that method works but the Windows system is quite slow even on an external USB3 drive -- running a Windows system natively should be a lot better).
I've actually got a spare SSD which I want to use for this -- I replace a 128 GB drive with a new Samsung 256 GB drive as I got a great bargain on it -- 99 GBP LESS 20% VAT which I got back at customs at the airport.
I'll use the SATA==>USB3 connector for connecting to the PC.
(Another possibility might be to get the Linux boot loader to load a Windows VHD from the external drive as well -- but I want the Windows system to work even if there is NO INTERNAL HDD in the computer).
I just bought a 1TB hard drive and want to install windows 8 on it (since I'm used to it already) I have the files for windows 8 on my computer ready to be put on the new hard drive, but thing is, how would I do it? would I just use a simple USB stick and plug it in? or would i have to burn the files on a disk?
Amazon.com: WD Blue 1 TB Desktop Hard Drive: 3.5 Inch, 7200 RPM, SATA 6 Gb/s, 64 MB Cache - WD10EZEX: Computers & Accessories.
I have a Windows 8 DVD(got it from a tech seminar in our college)and a license key from Dreamspark. I ran Upgrade assistant and it showed some compatibility details, beside those apps and sidebar these are my concerns:
1.Secure Boot isn't compatible with your PC
Your PC's firmware doesn't support Secure Boot so you won't be able to use it in Windows 8.
2.Dell Stage
Fingertapps
What really is Secure Boot and is it really necessary after I installed windows 8?
My second concern is that I have unpartitioned hard drive, there's only C drive which has about 60 gb free space out of 581 gb. I'm confused because I used to format my old windows xp PC now and then and it has three drives and during the format process I would choose windows xp to install in C drive and in order to do so I would follow the delete partition process. I knew very less about what I was doing when I used to format it. I just memorized the steps. So i was wondering if during the upgrade process it removes all data from C drive and installs windows 8 in an empty drive like it used to be during XP installation. I'm upgrading win 8 in my Dell inspiron 15 R with genuine win 7. It's a 2 yr old laptop so I guess it has UEFI, not sure though.
Windows 8, 64-bit.
Used to run Win 7 on our main drive, and used a second one for storage (mainly games), however something happened, making us unable to boot. So we decided to upgrade to Windows 8, which we put on our secondary drive, and that's now the main one (boots from here, is Disk 0). When I turn on the PC, it asks me whether to run on Windows 7 or 8 (8 is the default). C: contains Windows 8, D: Contains Win 7.
MAIN PROBLEM: Since we're going to use the old main drive as storage (the one with Windows 7), I wanted to format it, but it won't let me because, I suppose, of the System files still on it (System, Active). Picture of Disk Management below. How do I format it?
If I remove the boot drive from my old Windows 7 computer and put it into my new Windows 8 computer, how can I set up the new computer to allow dual boot at start-up?
View 1 Replies View RelatedI do this day in and day out with Volume Licensing but never with OEM installs...
A user that works at our company brought their personal laptop in, the hard drive failed hard drive tests so we have put one of our spare hard drives in and now we need to re-install Windows 8 x64.
Where do i get the installation media from if the users doesn't have a disc? Is it possible or do we need to order a disc?
Can i install windows 7 or 8 to an external hard drive so i can take it to another computer, select it from the boot menu and it will boot up?
View 7 Replies View RelatedInstalled Windows 8 first, then installed Win XP to a second partition on the same disk.
In windows 8, the XP partition is seen as D:
If I boot to XP, XP sees itself as I:
it sees the windows 8 partition as C: and that is what I want, is C: being win 8 and XP being D:
Is there anyway to change the lettering on the XP partition?
I installed Windows 8 with UEFI on a GPT SSD like the tutorial on this very forum states, but I ran into an issue when I plugged in my secondary HDD (1tb MBR?). It won't boot even if I make sure Windows Boot Manager is the primary boot option. What can I do about this?
If I unplug the drive, it boots fine. If I plug it back in, it stops and Windows tries to repair itself.
Apparently if you're using Win 8 with UEFI, you can't have a 2nd drive that uses extended or logical partition. Since I had Ubuntu on the 2nd drive (logical) it wouldn't boot. I haven't done it yet, but If I delete the partition it should work just fine. I created a bootable usb with Gparted and will fix it later.
Reloading windows 8 or 8.1 on a system that the product key is embedded in the Bios.
Scenario only concerning windows 8 or 8.1 any version, also data recover is not a concern: Systems are coming in that are built by a manufacturer (Dell, Toshiba, HP, Compaq, Emachine ect.) the system(s) are out of warranty, They are either in a boot loop, blue screening when loading windows or the hard drive has crashed and isn't loading windows at all. The customers never created recovery disks, nor can we due to windows not loading. We can not get to advanced mode and even if and when we can, creating recovery media is not available.
So let us be clear: We have a system that had windows 8 or 8.1 preinstalled by manufacturer, it was used for multiple months, no recovery media create, now the operating system is not loading, recovery partition corrupt or not accessible, refresh not available, windows product key is embedded in the Bios and is out of warranty.
What we have tried: System with failed hard drive with windows 8 sticker on it. Ran software that extracts product key from BIOS, Inserted an OEM disk for windows 8 and 8.1 when asked to input key, we used the key that was extracted, the installation tells us that the product key is not a OEM key. We do not have a skip button to continue? How in the world can we reload windows 8 or 8.1 on these systems? We have gone through all of the BIOS settings and have tried everything we can think of. If the product key for windows 8 or 8.1 is embedded in the BIOS what do we need to do to make the installation find the key and use it to continue the installation and activate.
From what we are seeing we are not the only one(s) asking this question, the problem is that the reply(s) are: use system refresh, use recovery partition, use recovery media? We understand the reasoning behind having the product key embedded but it shouldn't be this hard to use what the system already has?
I want to reset my Windows 8 as there is some odd behaviour going on.
I have my MY Documents, My Photos, My Videos etc... all on the D: Drive.
If I do a reset, will it just format and reinstall the C: drive, or will it wipe the D drive where all my documents are kept too?
I just recently built a new Windows 8 machine. Since I knew I was going to be getting an SSD down the road, I planned ahead:
Nutshell, the C: drive, the boot drive, is at the end of the partition, sized to 220 DB, so I knew it would be smaller than the 240/256GB drive I knew I'd eventually be getting. The Users folder is on the D: drive, so the C: partition is only the OS and apps. Everything's dandy.
I found EasyBCD and used it to move the boot manager over into the C: partition, so theoretically that's all I need to move over to the new drive. So what I want to do is move the C: partition over to the SSD, have it stay C: once it's there, and then have it boot into that partition. (Note that I cannot disconnect the hard drive when it's time to reboot because that's where the Users folder lives and I don't want to break that.)
I keep running into problems with the "keeping it C" part. When I clone the drive over, the old drive stays as C: (as you would expect), and the new drive gets a new letter. Attempts to change those letters using DISKPART from the Win 8 install DVD have been either futile or disastrous.
I've been using the free version of Macrium as my cloning / imaging tool...is there a better free tool I should be using?
just upgraded to 8 from XP. I have a recovery drive for XP. Can I reformat this recovery drive so I can use it to install & recover Windows 8 instead if I have a problem in the future?
View 1 Replies View RelatedI recently bought a laptop with Windows 8 and have erased the hard drive while trying to install another OS (not a good move, I know). This caused problems and now I'd like to re-install windows 8, except I have no way of doing this without knowing my product key, which I cannot access through my computer now. Is there a way to re-install windows 8 without having to purchase it again?
View 8 Replies View RelatedRe-install windows 8 with new motherboard and CPU
I ended up managed to be able to boot into windows after i swapped out my motherboard and CPU to the new ones and everything seems to be working as it should, windows automatically installed the intel drivers and all my old programs and settings are there perfectly.
I can only boot into windows if i select my backup drive as #1 boot device in the BIOS, the SSD isnt even on the list.
The thing I don't understand lies in that, if i select my SSD as priority, where the directory of windows is installed, i get a bootmgr missing error - I've tried the various methods of recovering this using the cmd and a windows installation disc.
This isn't a huge issue but it's really tripping me out as to why this is occurring? I initially had some issues getting windows to boot so i installed a clean windows8 on this backup drive, i didnt change any settings at all. was only making sure that the SSD was being recognized and i hadn't corrupted it somehow. is it possible that the backup drive boot manager is directing it to the SSD.
