Setup Installation :: Windows 8 Recovery Drive Not Found?
Jul 16, 2014
My Acer Aspire A7600U-UR24 came with windows 8. I made a recovery drive by choosing "create recovery drive" in windows 8. After making the drive i installed windows 8.1 from DVD. Some time later I tried to restore it back to factory with my recovery usb. Every time I try I get "windows cannot find a system image on this computer" even though my flash drive is plugged in. I tried booting from the drive, doesn't seem to work. Not sure if my windows 8.1 version not being activated has anything to do with it (I installed 8.1 on 2 computers from the same dvd didn't realize i couldn't do that) . but I think I should still be able to boot from the drive.
I was thinking if the problem is my flash drive, can I somehow transfer the system image from one flash drive to another?
Here's the screens: at this point there should be an option for windows 8 but there's not.
I am sure I have recovery images. Factory, and refresh. Asus shipped no recovery media. I obtained a copy of windows 8. I found out what my product key is. I have attempted every which way i can think of to get my system to recognize my recovery images exist. If i try to use "reset your pc" option it tells me unable to reset your pc. A required drive partition is missing.
If i choose system image recovery, hit cancel because it thinks the partition that definitely exists, doesn't, choose select a system image. Gives me a blank list. Choose Advanced...install a driver (you don't need to install sata driver as it recognizes my hard drive and Is listing it to choose a driver from should need be) i get an error installation had failed.
Internal error occurred (0x8007054F). No matter which driver IM trying to install. Usb, sata, dvd etc... So can't get my system image from my 32 gig stick, or my hdd.Image won't fit on dvd's. Worried i won't be able to do a clean install, as Asus's backups seem do reliable in mysituation(sarcasm) that i will lose all functionality like DVD playback, smart gesture touchpad, and some driver related setbacks.
I have checked and rechecked, and i have three system images to choose from. Total of six partitions.
If you have a recovery drive - that includes the recovery partition - made on one computer, but have a toshiba laptop with a bad drive (but the recovery partition is ok), can you replace/copy the partition on the recovery drive with the recovery partition from the bad laptop HD?
My friend's laptop would not boot, and would not factory recover, reset, or refresh. I tried to clone the hard drive before I started messing with the disc. It would not clone, but I was able to copy the recovery partition to a USB drive.
He never make recovery discs, so could not re-install, but I can borrow the recovery drive that my aunt made for her laptop.
I just purchased an Asus R510CC notebook with windows 8 and I bought a SSD drive to replace the current one.
I used Recovery Drive in Windows to create an USB boot drive with the recovery partition on it. I then installed the SSD and booted from the USB. When I get to the option to reset my computer I encounter an error with the following message: "Unable to reset PC. A required drive partition is missing". I already did a bit of research and BIOS tweaking but I can't install Windows onto my SSD.
I have been routinely backuping my OS and important files using Windows 7 backup on a NAS. It just so happened that I needed to re-image my OS drive and I got into the Windows 8 recovery boot sequence.
Under the Advanced tools I selected the System Image Recovery and tried to look for the system image on the network path. Although the prompt said it was connecting to the network , the network share was not found. the command prompt couldn't ping google.com and netsh wlan <SSID> command did not work in hopes of connecting to my local wifi.
Is there a way to connect to the wifi network where my NAS is connected to in order to re-image from the system image found on the NAS? Luckily , there was an older image on a separate local HDD that I could re-image from but I would prefer if I could connect to the NAS during the recovery process.
I purchased a Lenovo laptop with Windows 8 Pro preinstalled. It came with 500 GB HDD. I changed the DVD Rom with SSD/HDD tray to use for additional drive. I put an SSD in there and installed Windows 8 on it using a USB Recovery Drive, which I don't have anymore. So my current setup looks like this:
After upgrading to Windows 8.1, the license of some software I'm using got messed up and I couldn't manage fixing it, so the only option I've got left is to reinstall/reset Windows. But since the Recovery partition is on another drive, when I go about creating a Recovery Drive, the option "Copy the recovery partition from the PC to the recovery drive" is greyed out. I've got stuff on my HDD, which I can't currently backup so I don't wan't to format that drive. I'm perfectly fine with formatting the SSD, that's what I want.
How can I reinstall/reset my Windows? The only option I see is to install Windows on the Hard Drive (by doing a backup and formatting it first), and then create a usb recovery drive and reinstall again on the SSD, but that's a lot of hassle and I'd need to find an external hard drive for the backup.
I intentionally left the Hard Drive in the original bay (as Disk 0) because of the better protection against falling compared to the added bay in place of the DVD drive.
I have a brand new system with an OEM version of Windows 8 installed (Core not Pro)
ASUS CM 6870 2 TB HD 16 TB RAM ASUS P8H77-M Pro Motherboard
The new system works well but I have also purchased an OCZ Vector 256GB SSD and intend to install it as my primary hard drive.
ASUS didn't and will not supply a recovery disk.
ASUS provides an activation key for a downloadable version of Acronis True image. I tried that but their version is not compatible with Windows 8. I managed to get a newer version but it didn't recognize that the SSD was installed.
Next, I used Win 8 to make a recovery drive USB drive thinking that I would be able to do a clean install of Win with it. I had the 2TB HD disconnected and the SSD installed but the recovery drive refused to install Win 8. I either got the message "The drive where windows is installed is locked. Unlock and try again." or "The drive is too small to format" (the wording on the last may not be exact)
I was able to "find" a Windows 8 ISO file. I burned it to a DVD and was able to install Win 8 but it was not a UEFI installation. There were only 2 SSD HD partitions: 1. System Reserved - 350 MB NTFS. 2. 238.13 GB NTFS Healthy.
I then deleted these volumes and followed the UEFI installation instructions in the thread: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
Windows installed but it was not a UEFI installation. I got the same partitions as above. At step 6, I only saw the 2 partitions. I tried this process twice with the same results.
The USB stick was prepared using the instructions in this thread:
UEFI Bootable USB Flash Drive - Create in Windows
I think that the USB drive should have had 4 partitions on it but it only has one:
I purchased a new laptop with windows 8 and used the options in windows 8 to create recovery media and chose the usb drive option. I was wondering if I would be able to copy the files in the usb drive onto my external HD; then if I ever need them I could put them back onto a usb drive and reinstall windows 8. I took a screenshot of the files on the usb drive.
I need to delete a recovery partition off my second hard drive. I've seen this link: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista - My Digital Life but it's for Vista and the final command "delete partition override" doesn't work in diskpart. It comes up saying "The specified command or parameters are not supported on this system"
Yes, I really do want to delete the recovery partition because it's on my secondary HDD, I still have the recovery partition on my C: so I'm really not losing anything ....
I bought a brand new Acer Aspire xc600 today and it had Windows 8 installed. First thing me and my husband did was to try to install win7 (as we dislike Windows 8 for many reasons)... When it didnt work with just putting in the cd and install, we (stupidly without making recovery discs as we thought we would never need it) formated the drive and made it completely clean before installing win7 (which works now). This means we have no Windows 8 recovery disc or E-recovery management program and therefor cant do factory reset and return this piece of crap pc... (We play world of warcraft and my 7year old pc has only been updated once when it comes to graphic card to geforce 9800 and still perform better outside the game).
The performance test of the whole system give the graphics a lousy 5.0 which is worse than my husbands 3yr old graphic card as well! Only numbers that have increased is the RAM and CPU.
I feel disappointed as the graphics card should be better than mine or my husbands and have better performance even if its the "laptop sized card".
So to the issue, is there a way we could restore/reinstall the computer to factory settings with Windows 8 and Acers drivers as it was when we started it up earlier today?
I've been trying to install windows 8 , but it says "No drives Found " . I tried to find out some solution from net , and tried the method of using cmd ( diskpart , listdisk ) but only one drive of cdrom is shown using cmd.
How to solve it , other than cmd , as it is showing one drive that is of cd-rom . I'm using hp probook 4540s . . .
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB. 2- F 9 to choose boot order.. selected USB device 3- Installation starts for WIN 7 4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy... 5- Driver not found / wrong driver.. 6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
I reinstalled windows 8.1 on my Samsung NP530U3C-A10EE. And now the problem this that I can't boot it without usb stick that contains windows installation files. I can boot up windows and remove the usb stick evertything is working perfectly, but if I try to boot up win without usb, it gives error "Operating system not found. Press CTRL+ALT+DEL to restart". VOLUME C: is one where windows are installed (SSD), System Reserved is the system partition that windows create automaticaly (SSD), volumes D: and F: are my hdd volumes D: is empty & F: is stored with my personal files (photos, music etc.)
Acer Aspire V5 laptop that was running an OEM Windows 8 to upgrade to 8.1.
After selecting the Upgrade to Windows 8.1 via the store, the system went through it's install procedure, however after it does an auto reboot, it gives you a blank screen with the message No Operating System found, in the upper left corner.
But, you can turn the machine off and back on, and it will boot just fine. However if you select restart it does the same thing "no operating system found", on restart and again you must power down and power back on.
I have searched for fixes, but all seem to point to some sort of re-install process. I am not to crazy about the idea of re-installing to factory settings or doing a repair back to Windows 8 and attempting to upgrade again, are their any known shorter fixes for this?
And if I do go back to Windows 8, and try to upgrade again, what is to say it won't happen again?
I just got a FM2-A75MA-E35 motherboard and a installing Windows 8 on a freshly formatted SATA HDD. My BIOS see's the drive and has it second in the boot order, just after the DVD-ROM drive. It has a label with the drive serial number and everything, along with the drive being 'enabled' in BIOS. When I get up to the spot to choose what drive to install Windows to, its says 'No drives were found, please select a storage driver'. I found that it shows C: when I browse for drivers. Why this isn't working?
I got something buggy on my laptop, and i want to recover my laptop to the first time i got the pc. And when i downloading the recovery manager i got a message : This softpaq will not be installed on this pc because HP Recovery Manager cannot be found in this system.
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I have some problems with my laptop ASUS K55VD. I had windows 8, but with the store of windows I have updated to windows 8.1.
I have tried to use the recovery partition, but every time I try appears a message. Failed to reset your computer. A partition of unity necessary is missing. For that reason I have looking for some information, and with CMD commands like "diskpart". I have noticed that I have 8 volumen.
And in Computer Management appears this.
Then googling recommend to use EaseUS Partition, and some many things change. In the beginning, I had the same 3 partions in red and I don't know what happened.
But in diskpart change too, and I only have 4 volume, and it have dissapeared the recovery partition, and I don't know why?
Before to use EaseUS partition I have created a USB booteable with 9.79gb, and I had this:
But, in this days I have tried to create the USB booteable again, but I can't. And everytime I have tried to run the usb, appears to select the language, the keyboard, and then appears the same windows with troubleshoting and turn off (it returns at the previous windows in blue)
All of a sudden I can't reliably play any video media on my Win 8 64bit computer -- was working fine yesterday and AFAIK nothing (other than perhaps Windows automatic updates) changed. My first thought was to try and restore but even though I'm sure I created a restore point it tells me there isn't one. Sigh.
Okay, so then I try to perform a reset (but keeping all my files) and it tells me some files are missing and to insert my recovery media. All well and good, I actually have that (and know where it is) but when I insert the disk it tells me it is NOT a recovery disk.
It is, of course, precisely that -- a Windows 8 Recovery Media for Windows 8 Products 64 bit. I am running an official copy of Win 8 (well, 8.1, but I have no media for that since it was a free update). Yes, it's OEM (Dell) but that shouldn't make a difference. And, more importantly, what I am to do now?
it goes thru all 3 disks and then says failed...I have reset EUFI and CSM & formatted drive...it is maddening....I have 3 HP 2000 doing the SAME THING!!! what is going on with simple wipe and reinstall FROM THEIR recovery media...the other 2 are Toshiba using USB...
It's too late for me to return the computer so I want to be able to use it, unfortunately I don't know his password and there's no chance he will tell me. I can't reset the password because it's linked to his email that I don't have access to.
So doing some research online I found some programs to recover the password that I could burn onto a disc and then boot from the disc. The problem is despite changing the boot order in the BIOS to but from CD/DVD (in my case I'm using a DVD), it doesn't boot from it and eventually just goes to the password login for Windows.
I disabled Secure Boot, I didn't have anything called Legacy Boot to enable, but I did disable something called Boot Quiet Mode, and once I did that when I first start the computer instead of getting a Gateway logo I get the Windows logo. I've searched the BIOS and can't find any other type of boot option.
I figure if I could get the darn thing to boot from disc I could try one of the many programs for password recovery but I can't get that far.
I built up a new PC featuring a brand new SSD (i.e fully unallocated). Then, I made a clean install of Windows 8.1 pro (64bits) using an ISO DVD. Using Windows disk management tool after the install, I can see that only two partitions have been created: one System partition in NTFS (350MB) and the remaining of the SSD is the C: partition while I was expecting a third one : a recovery partition. Of course, I do not remember a prompt during the install to ask whether I want a recovery parttion or not.
Is it normal ? Is a recovery partition useful knowing I have the install DVD ? If the recovery partition has some advantages, is there a way to create it after the install is completed ?
I will need to do a complete system recovery. My computer originally came with windows 7 and then downloaded and installed windows 8. I have my product key. When I downloaded windows 8 it gave me the option of burning a copy of windows 8 to a dvd, however I did not do that. Whenever I do a system recovery will I be able to get windows 8 back without having to pay for another download?
I recently decided to buy an ultrabook and I got me this one: LG Z360-7416, with a ssd and windows 8 (x64). As usual, it came with a lot of garbage installed which was using almost half of the ssd storage (128GB), so I decided to do a clean install. I got me a msdnaa copy of the windows 8.1 pro (x64). So, i used a pendrive to boot up on UEFI mode and selected custom install and when i get to the select partition, it shows everything fine, i select a partition and when a click on install, it returns an error saying it cannot install on my partition (i dont remember exactly what it says), and when i click on refresh, all my partitions vanishes, even going into the prompt and using diskpart doesnt show my partitions anymore. I tried to load some drivers, but it didnt work.
I was only able to install windows 7(x64), where nothing of these things happens, it installs realy easy. I tried to install windows 8 from windows 7, like an upgrade, but after it restarts, it gets stuck also. My disk is formatted on GPT, as im using EUFI on my windows 7 installation.
Tried almost a hundred times using all solutions i found online, but always the same result. And to get even more weird, some rare times it gets to the installation part, where it says the progress, but stays on 0% of unpacking files...
Its seens to be missing some especific driver to windows 8 be able to work with my ssd, but i cant get it right, but if it came installed with windows 8, it must be a way to make then work together.
Unfortunately i deleted the recovery partitions, so im stuck on windows 7.
Brand new laptop. HP. 17e UEFI +GPT etc. Upgraded to 8.1 from 8, first thing. Then clicked on the MS, create recovery. (in blind hope of a clean 8.1 restore). Inserted (32gb stick) (later found out is illegal windows 8 version, that is not removable.) SD-extreme, 32gb. list on toms HW, as winner of all, (and is useless for this app).
So I pull out my very old SD cruiser glide, 32gb (old , slow and not win 8 cert (a good thing). Yes all 32gb extremes are mapped as HDD not removable media and is doomed. (known on all forums) but same error.
The cruiser shows up i device manager under removable media....btw i want to find out why the missing files error. I have a HDD and SSD, with latter mirrored. both the orig, HDD fails and SSD fails. same way. I parked the HDD , and run only SSD. but both fail... (my guess is , upgrades 8.0 to windows 8.1 is cause).
now the screen, attached
How can i find the log of these errors, it's not in event viewer.. oddly. sfc/ scannow works. as does chkdsk, and restore (create) works,. and system is Fast a lightning. All HP apps works, cept there version of create disk for same reasons.
My HP create recovery now works on the GLIDE. (old very old 32gb stick i had laying about). So now I am thinking HP? blocks the MS create so you will use theirs? But I'd lilke to know this, what files are missing....