Now I am using windows 8.1 to when I am trying to installing windows 7 I got the error of this....
The procedure entry point ?? 0WString2@@QAE@XZ could not be located in the dynamic link library C:windowssystem32wbemfastprox.dll
After the Windows 8 Update, I get the following message when I log in;
dwm.exe - Entry Point Not Found
[red circle with white x in it]
The procedure entry point CheckDesktopByThreadId could not be
located in the dynamic link library C:WINDOWSsystem32dwm.exe.
A few days before update I installed Office 2013 Preview.
I use Windows8 since the consumer preview without problems on my Lenovo S10-3 with the following specs;
Intel Atom dual core processor @ ~1,7GHz
1GB RAM
Much more isn't in it XD.
I had also made some small changes in the Registry to change the max resolution, but I did that in June.
I've been trying to install windows 8 , but it says "No drives Found " . I tried to find out some solution from net , and tried the method of using cmd ( diskpart , listdisk ) but only one drive of cdrom is shown using cmd.
How to solve it , other than cmd , as it is showing one drive that is of cd-rom . I'm using hp probook 4540s . . .
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB.
2- F 9 to choose boot order.. selected USB device
3- Installation starts for WIN 7
4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy...
5- Driver not found / wrong driver..
6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
My Acer Aspire A7600U-UR24 came with windows 8. I made a recovery drive by choosing "create recovery drive" in windows 8. After making the drive i installed windows 8.1 from DVD. Some time later I tried to restore it back to factory with my recovery usb. Every time I try I get "windows cannot find a system image on this computer" even though my flash drive is plugged in. I tried booting from the drive, doesn't seem to work. Not sure if my windows 8.1 version not being activated has anything to do with it (I installed 8.1 on 2 computers from the same dvd didn't realize i couldn't do that) . but I think I should still be able to boot from the drive.
I was thinking if the problem is my flash drive, can I somehow transfer the system image from one flash drive to another?
Here's the screens: at this point there should be an option for windows 8 but there's not.
I reinstalled windows 8.1 on my Samsung NP530U3C-A10EE. And now the problem this that I can't boot it without usb stick that contains windows installation files. I can boot up windows and remove the usb stick evertything is working perfectly, but if I try to boot up win without usb, it gives error "Operating system not found. Press CTRL+ALT+DEL to restart". VOLUME C: is one where windows are installed (SSD), System Reserved is the system partition that windows create automaticaly (SSD), volumes D: and F: are my hdd volumes D: is empty & F: is stored with my personal files (photos, music etc.)
View 6 Replies View RelatedAcer Aspire V5 laptop that was running an OEM Windows 8 to upgrade to 8.1.
After selecting the Upgrade to Windows 8.1 via the store, the system went through it's install procedure, however after it does an auto reboot, it gives you a blank screen with the message No Operating System found, in the upper left corner.
But, you can turn the machine off and back on, and it will boot just fine. However if you select restart it does the same thing "no operating system found", on restart and again you must power down and power back on.
I have searched for fixes, but all seem to point to some sort of re-install process. I am not to crazy about the idea of re-installing to factory settings or doing a repair back to Windows 8 and attempting to upgrade again, are their any known shorter fixes for this?
And if I do go back to Windows 8, and try to upgrade again, what is to say it won't happen again?
I am sure I have recovery images. Factory, and refresh. Asus shipped no recovery media. I obtained a copy of windows 8. I found out what my product key is. I have attempted every which way i can think of to get my system to recognize my recovery images exist. If i try to use "reset your pc" option it tells me unable to reset your pc. A required drive partition is missing.
If i choose system image recovery, hit cancel because it thinks the partition that definitely exists, doesn't, choose select a system image. Gives me a blank list. Choose Advanced...install a driver (you don't need to install sata driver as it recognizes my hard drive and Is listing it to choose a driver from should need be) i get an error installation had failed.
Internal error occurred (0x8007054F). No matter which driver IM trying to install. Usb, sata, dvd etc... So can't get my system image from my 32 gig stick, or my hdd.Image won't fit on dvd's. Worried i won't be able to do a clean install, as Asus's backups seem do reliable in mysituation(sarcasm) that i will lose all functionality like DVD playback, smart gesture touchpad, and some driver related setbacks.
I have checked and rechecked, and i have three system images to choose from. Total of six partitions.
I just got a FM2-A75MA-E35 motherboard and a installing Windows 8 on a freshly formatted SATA HDD. My BIOS see's the drive and has it second in the boot order, just after the DVD-ROM drive. It has a label with the drive serial number and everything, along with the drive being 'enabled' in BIOS. When I get up to the spot to choose what drive to install Windows to, its says 'No drives were found, please select a storage driver'. I found that it shows C: when I browse for drivers. Why this isn't working?
View 1 Replies View RelatedI have a Dell XPS 420 and I've just bought an SSD for it. Every time I boot the machine I see "Operating system wasn't found" now, despite having booted into Windows successfully just before.
The only change I made was connecting a standard SATA 2TB drive - which it boots into fine - but now when I have removed the 2TB drive I cannot boot onto the SSD.
I bought SSD and I want to install windows 8.1 there.
I have HDD which runs windows XP. I have no usb, no ODD.
I think I have to boot a setup file instead of windows XP but I don't know how to do it.
Is it possible to install Windows 8.1 as Legacy with MBR? Or only as UEFI with GPT? I'm kind of confused with all this UEFI business, I always used MBR in my Windows installations. Also, Truecrypt does not support UEFI, so if installing Windows 8.1 I should do it as legacy.
Also, how can I control during the install process if I want to set my system installation as UEFI or Legacy?
I have just had limited success installing Ubuntu 12.10 onto an external diskon my new Samsung (series 3) Windows 8 laptop.
The secure boot and fast start up have been disabled.
The situation now is that Windows or Ubuntu will not boot up after pressing the power button, when doing this I get a dark screen with the following message:
error: no such device: 6dada016-95df-4ef5-a343-4a77e8afd396
grub rescue >_
I can now only boot up either program by hitting the F10 key directly afterpressing the power button, I then have to select one of the options in the boot options before themachine will boot (both systems boot up as normal when following this option).
if the external drive is not plugged into the USB port I want mylaptop to boot directly into Windows 8. Can this be achieved?. I would like to start Ubuntu through the settings, change PC settings option.
I wonder if i could hook up my new Kingston SSDNOW W300 120Gb ssd to my main computer with windows 8 ( Crappy 1Tb Seagate SSHD ) And install linux on the ssd. So when me and my friends motherboard finaly arrive i will be able to just hook up the ssd and go right into linux?
Also I want to be able to temporarily play around in linux with the main computer ( Boot into linux instead of win 8. ) to play around and install the things i want.
I got a Laptop pre-installed with Windows 8, but i deleted it and installed a Linux distro because its better for what i do. BUT i love gaming, and gaming on Linux is difficult. So i want to re-install Wondows 8.
Where can i download Windows 8 64bit legally? I know how to burn to disk and install with the key saved on my Laptop.
I have downloaded Windows 8 Pro 64-bit through the students/partner site and burnt it on a DVD. When I boot from it though I get many types of errors....the most common is 0xc0000098 that says that my PC needs to be repaired and that one or more files are missing or contain errors...I have also tried burning 3 different dvds with different programs to make sure it's not a program's fault but still with no results..
View 9 Replies View RelatedI'm trying to dual-boot Windows 7 and Windows 8 in the same machine.
Before doing something this risky on the host computer I tried to install Windows 8 in a VM using VirtualBox but I got an 0x0000005d error similar to the screenshot below:
which means my CPU doesn't seem to support the NX (Non-eXecute) or XD (eXecute Disabled) bit feature (or at least doesn't have it enabled).
I proceeded to check with CPU-Z and going to the model page on HP's website and both of them seem to imply that the NX feature is available for my CPU.
Here's the CPU-Z screen:
The problem is that even though I have the "Hardware Virtualization" feature enabled in the BIOS, it seems like there's no option available regarding said NX (or XD) bit by default. The BIOS software is InsydeH20 Rev 3.5, version F.32.
Is there a way to be able to install Windows 8 on said computer that doesn't involve having to upgrade the BIOS software?
I have an Acer Aspire 5745G-644G50MNKS notebook with preinstalled OEM win 7 home premium.
Specs as following:
Core i7 640M Processor (2.87GHz, 4MB L3 Cache)4 GB DDR3 RAM500 GB HDD15.6" 16:9 HD LED DisplayDVD RW1 GB VGA (NVIDIA GEFORCE GT 420M)WIFI / Bluetooth / Card Reader / Web Cam
I'm wishing to update my system into Windows 8 Pro or Enterprises. But unfortunately my model isn't appears in Acer's Windows 8 Eligible Models list or Affected Models List.
I think my system has more than enough performance to run Windows 8. But my bios don't have UEFI support. So, i just wanna know will my computer be able to run Windows 8 without any troubles without that secure boot option.
I"ve run Windows 8 Upgrade Assistant Tool in my system and it says everything is okay except Secure Boot option. also I'v checked individual hardware vendor sites for the latest drivers for windows 8. Most products has the drivers, And the current drivers also compatible with Windows 8 according to the upgrade assistant.
What should i do so? Will the win 8 upgrade useless in my system? or it will be better than the current win 7?
I bought an acer 756-2808 netbook last year with windows 7 from Amazon. This netbook came with a "upgrade to Windows 8. SoI did the upgrade when it was released.
Sadly, I probably only used netbook for a month or two because the LED screen cracked. They are pretty fragile.
Then, I upgraded to 8GB ram. This thing flies!
I downloaded 'produkey' from nirisoft.net, because I can't find the product key anywhere for the life of me.
So, now I have the product key for the current windows 8 installed. Will this upgrade product key work for a clean install? Moving on, I ordered a Samsung 840 Pro 128 GB which should be arriving in a few days.
Finally, I want to do a clean install of Windows 8.1 using a Windows 8 Product key. Is this possible? The original HDD on this netbook has nothing on it, so I don't really have to back anything up either (like I said I barely used it for two months before the screen cracked!)
I did some searches and found this link: [URL] .....
So if the above step is correct.
Do I:
1.) Get the ISO on the USB following the steps mentioned in the link above.
2.) Take out old HDD and install new SSD
3.) Reboot computer with USB
4.) ?
5.) ?
6.) ?
etc.
Are these steps incorrect?
Since I installed Ubuntu onto my computer, I couldn't boot the Windows 8. I tried installation DVD to repair, but it didn't work. I tried these solutions; solution1, solution2, none of them worked either. I tried refreshing, it stopped at 37%.
When I use diskpart to list partitions from command prompt via the installation DVD, I chose the right partition, but I couldn't activate it.
Before, my PC was setup like this:
- disk0: windows xp
- disk1: windows 7
Bios boot priority set to disk1.
So no boot loaders, when I (rarely) need xp, I would switch via bios
Now I wanted to try Windows 8, so I've
- download 'Windows 8.1 Enterprise Evaluation' and burnt on a dvd
- bought and connected a new disk (disk2)
- boot from dvd, installed choosing the new disk2
Now, everything works fine, Windows 8 got installed on disk2. But the strange thing is this:
- if, from bios, I choose disk2, it says the disk is not bootable
- choosing disk1, a boot loader shows up, letting me choose between win7 and Windows 8.1
(- choosing disk0, nothing has changed, xp starts like before)
So, I'm confused. I was expecting Windows 8 booting from the new disk2.
- why disk2 doesn't boot?
- would have been better physically disconnecting disk0 and disk1 before installing?
I've been salivating at the idea on installing W 8-64 Pro on a Dell Optiplex 755 at work. But a sudden reality check came over me & I realize Windows 8 doesn't necessarily work on older machines. The Dell is a Vista era machine. So maybe W 7-64 Pro would be a better choice?
View 9 Replies View RelatedHave any of you successfully installed Windows 8 with UEFI on a RevoDrive X2 (PCI-E express card)?
It starts the installation just fine for the RevoDrive X2 after loading it's drivers, but on first restart it...:
No boot drive found.Manually select to boot from the RevoDrive from the boot menu (F11), and it just restarts the installation again from scratch.
It installs and runs just fine with legacy BIOS (MBR) for the RevoDrive X2.
It also installs and runs just fine with UEFI on an internal SATA2 HDD.
Things I've done:
Bootable Windows 8 USB formatted as FAT32 w/EFI folder in itEnabled wake on PCI-E/PCM in UEFIBooting from USB from boot menu (F11) and not set to always boot from USB.
I'm wanting to upgrade my laptop to Windows 8. I currently have Ubuntu 12.10 installed alongside Windows 7. I've had a lot of trouble getting ubuntu installed and working (AMD graphics ) so I'd like to just leave that as is.
Is it possible to just install windows 8 over W7 in the same partition? How do I go about doing that? Is it as straight forward as just putting the disk in or is the whole secure boot thing going to cause issues? I want to do a clean install rather than using the upgrade assistant to install Windows 8 over W7.
My problem is that I want to install a higher version of win 8, respectivily win 8 pro in a computer that already came with another version of win preinstalled (win 8.1). It's possible to do this in a bios that prevents csm launch.
View 1 Replies View RelatedLaptop with pre-installed Windows 8 on it. The salesman at the MediaMarkt said that these Laptops are already with pre-installed Windows 8 and also assured me that I can choose English as a language when I am running the laptop. But, when I installed it, the system chose German language and I am really having trouble to understand everything now. My Problem is here how to install Windows 8 with English language and another thing is when I installed the program, it has asked me an Microsoft E-Mail address, but by mistake I installed it with my gmx.de E-Mail address, which means that I am unable to use the Apps in the Computer as it has been asking only Microsoft account, I cant deactivate my gmx.de account which I used when I installed the OS Windows 8 to this Computer.
View 2 Replies View Relatedi just got a new computer, it came with windows 7 home premium pre installed, however it is not activated and it says i have 30 days to activate it.
however i dont have a key as i didnt purchase the OS, instead i have ordered Windows 8.1 64Bit Operating System DVD English OEI/OEM International and my dvd disc comes tomorrow so my question is, can i install windows 8.1 over windows 7? i would just put the disc in delete whats on the harddrive, format it and install my new OS right?
My Current Windows is Windows 8. I want to install Windows 8.1 .
My laptop comes up when installing Windows 8.1. I have chosen the language
In the page after when i want to install Windows the whole system in Hang. I cannot select any option on the page.
I've recently acquired a tablet to pilot with my company. It is a Dell Latitude 10 ST2, and my issue is I'm trying to install and upgrade to Windows 8.1 Enterprise, but having no luck so far.
I have the 32-bit version of Win 8 Enterprise on a USB, and when I get to the "Installing Windows 8.1 screen" it get to 35%, and then gives a popup that the "Windows 8.1 Installation Has Failed". I was trying to see if there was a real error message or log to tell me what the issue is, but I haven't been able to locate anything yet. I don't even make it to the following screen ....
I recently upgraded capacity of my hard drive (from 350GB to 500GB). I'm wondering how can I install my windows oem license from my previous hard drive to my new one. My laptop is Compaq Presario CQ58 and OS is Windows 8.
View 9 Replies View RelatedI just bought a 1TB hard drive and want to install windows 8 on it (since I'm used to it already) I have the files for windows 8 on my computer ready to be put on the new hard drive, but thing is, how would I do it? would I just use a simple USB stick and plug it in? or would i have to burn the files on a disk?
Amazon.com: WD Blue 1 TB Desktop Hard Drive: 3.5 Inch, 7200 RPM, SATA 6 Gb/s, 64 MB Cache - WD10EZEX: Computers & Accessories.