My problem is that I want to install a higher version of win 8, respectivily win 8 pro in a computer that already came with another version of win preinstalled (win 8.1). It's possible to do this in a bios that prevents csm launch.
View 1 RepliesI'm trying to install windows 8.1 to an external hard disk (solid state drive 128 gb usb3).
I've tried easyUFEY WinToUS creator and AOMEI Partition Assistant Standard(Windows to go) with no luck.
My bios has UEFI option only(no legacy). On my old laptop it works just fine(I had the legacy option) but now, I cannot do that anymore.
I'm pretty sure it's a bios boot issue and I don't know how to fix it. I've tried using GPT partition instead MBR, Still nothing.
The laptop is a sony vaio duo 13 and I have no legacy option in bios
For whatever reason the SSD didn't have an EFI partition and Windows 8 wasn't installed on a GPT partition... So it didn't show up as bootable UEFI device.
Been fiddling around with it now for one day but didn't get it running. My notebook had a hardware defect... so I removed the SSD and sent it to the hardware service provider.
Yesterday I received the repaired notebook but I totally fail in setting up UEFI so it would boot from the SSD again (with my old Win installation).
When installing Win 8 it was probably all handled automatically.
But now I'm lost... There's a "Windows Boot Manager" entry in the UEFI but it points to the hard disc... and I can't select the SSD. (It's detected as Hard Disk 1 in the UEFi's info tab though)
There is a BOOTMGR file in the SSD's root.
Question: How would you approach this migration?
I just bought a copy of Acronis True Image 2013 with Plus Pack. It appears that this is all I need as True Image will install the new motherboard drivers as part of the migration process. But do I stay with MBR or move to GPT?
Presently both Win7 (on a 120GB SSD drive) and Windows 8 (on a different 120GB SSD drive) are both MBR format. I don't want to start over from scratch. That's why I bought the Acronis 2013 with Plus Pack.
I am running windows 8 pro in a Intel i5 3470 + Gigabyte B75M-D3H system with UEFI bios .
I have two drives OS drive is a SSD & a 1 tb HDD with two partitions.
I am removing the SSD & want to transfer OS to one of the partitions on the HDD , the issue is boot files on the small 350mb system reserved partition on the OS drive , not sure how to transfer this partition or if this partion in on the SSD or the HDD.
This what my drives look like , C: is SSD :
Before i installed the SSD , I was running win 7 from the HDD installed in the 170 gb partition , to install the SSD i had to remove the HDD then do a fresh install of win 8 on the SSD & connected the HDD back later ,
The 170gb HDD partition is still untouched & has the old OS files , I want to transfer the SSD partition back to this 170gb partition i.e drive F: in the above pic . I am not sure how to transfer it & what to do with the system reserved partition .
I bought SSD and I want to install windows 8.1 there.
I have HDD which runs windows XP. I have no usb, no ODD.
I think I have to boot a setup file instead of windows XP but I don't know how to do it.
Re-install windows 8 with new motherboard and CPU
I ended up managed to be able to boot into windows after i swapped out my motherboard and CPU to the new ones and everything seems to be working as it should, windows automatically installed the intel drivers and all my old programs and settings are there perfectly.
I can only boot into windows if i select my backup drive as #1 boot device in the BIOS, the SSD isnt even on the list.
The thing I don't understand lies in that, if i select my SSD as priority, where the directory of windows is installed, i get a bootmgr missing error - I've tried the various methods of recovering this using the cmd and a windows installation disc.
This isn't a huge issue but it's really tripping me out as to why this is occurring? I initially had some issues getting windows to boot so i installed a clean windows8 on this backup drive, i didnt change any settings at all. was only making sure that the SSD was being recognized and i hadn't corrupted it somehow. is it possible that the backup drive boot manager is directing it to the SSD.
I wanted to do a fresh windows 8.1 install (i have a samsung NP500P4C-T03CL notebook with windows 8 OEM preinstalled and when i updated to 8.1 the system went slow and "faily"). So i put the CD on the drive, but for my suprise when i reboted the system to enter the BIOS the F2 key didn't do the job, nor it appeared on the splash screen on samsung. After googling a lot and under trial/error concept i could enter the BIOS via Shift+Restart.
I did some changes to the BIOS booting set-up and noticed i have 2 Windows Boot Manager, the CD, the HDD and one option called "SETUP" that has a "!" ("!3.Setup"). So i tried every combination posible with Secure boot unabled, and UEFI+CSM OS, also with UEFI disabled, and none gave me the option to enter bios with F2, or recovery with F4. I managed to install win7 on another HDD. Main thing, besides the F2, F4, F8, F9, F12 (yes i prove all of them, even ESC), is that whenever i change the boot order it's not saved, and it is restablished to:
1. Windows Boot Manager
2. Windows Boot Manager
3. Setup
4. HDD
5. CD
Also i noticed that on the password options the one for the HDD appears grayed and as "FROZEN". I entered user and supervisor password, neither cleared the HDD one. i want to keep the BIOS update as a last resort. clearly it's not hdd related as the same thing happened when i tried another hdd with win7).
Is it possible to install Windows 8.1 as Legacy with MBR? Or only as UEFI with GPT? I'm kind of confused with all this UEFI business, I always used MBR in my Windows installations. Also, Truecrypt does not support UEFI, so if installing Windows 8.1 I should do it as legacy.
Also, how can I control during the install process if I want to set my system installation as UEFI or Legacy?
I have just had limited success installing Ubuntu 12.10 onto an external diskon my new Samsung (series 3) Windows 8 laptop.
The secure boot and fast start up have been disabled.
The situation now is that Windows or Ubuntu will not boot up after pressing the power button, when doing this I get a dark screen with the following message:
error: no such device: 6dada016-95df-4ef5-a343-4a77e8afd396
grub rescue >_
I can now only boot up either program by hitting the F10 key directly afterpressing the power button, I then have to select one of the options in the boot options before themachine will boot (both systems boot up as normal when following this option).
if the external drive is not plugged into the USB port I want mylaptop to boot directly into Windows 8. Can this be achieved?. I would like to start Ubuntu through the settings, change PC settings option.
I wonder if i could hook up my new Kingston SSDNOW W300 120Gb ssd to my main computer with windows 8 ( Crappy 1Tb Seagate SSHD ) And install linux on the ssd. So when me and my friends motherboard finaly arrive i will be able to just hook up the ssd and go right into linux?
Also I want to be able to temporarily play around in linux with the main computer ( Boot into linux instead of win 8. ) to play around and install the things i want.
I got a Laptop pre-installed with Windows 8, but i deleted it and installed a Linux distro because its better for what i do. BUT i love gaming, and gaming on Linux is difficult. So i want to re-install Wondows 8.
Where can i download Windows 8 64bit legally? I know how to burn to disk and install with the key saved on my Laptop.
I have downloaded Windows 8 Pro 64-bit through the students/partner site and burnt it on a DVD. When I boot from it though I get many types of errors....the most common is 0xc0000098 that says that my PC needs to be repaired and that one or more files are missing or contain errors...I have also tried burning 3 different dvds with different programs to make sure it's not a program's fault but still with no results..
View 9 Replies View RelatedI'm trying to dual-boot Windows 7 and Windows 8 in the same machine.
Before doing something this risky on the host computer I tried to install Windows 8 in a VM using VirtualBox but I got an 0x0000005d error similar to the screenshot below:
which means my CPU doesn't seem to support the NX (Non-eXecute) or XD (eXecute Disabled) bit feature (or at least doesn't have it enabled).
I proceeded to check with CPU-Z and going to the model page on HP's website and both of them seem to imply that the NX feature is available for my CPU.
Here's the CPU-Z screen:
The problem is that even though I have the "Hardware Virtualization" feature enabled in the BIOS, it seems like there's no option available regarding said NX (or XD) bit by default. The BIOS software is InsydeH20 Rev 3.5, version F.32.
Is there a way to be able to install Windows 8 on said computer that doesn't involve having to upgrade the BIOS software?
I have an Acer Aspire 5745G-644G50MNKS notebook with preinstalled OEM win 7 home premium.
Specs as following:
Core i7 640M Processor (2.87GHz, 4MB L3 Cache)4 GB DDR3 RAM500 GB HDD15.6" 16:9 HD LED DisplayDVD RW1 GB VGA (NVIDIA GEFORCE GT 420M)WIFI / Bluetooth / Card Reader / Web Cam
I'm wishing to update my system into Windows 8 Pro or Enterprises. But unfortunately my model isn't appears in Acer's Windows 8 Eligible Models list or Affected Models List.
I think my system has more than enough performance to run Windows 8. But my bios don't have UEFI support. So, i just wanna know will my computer be able to run Windows 8 without any troubles without that secure boot option.
I"ve run Windows 8 Upgrade Assistant Tool in my system and it says everything is okay except Secure Boot option. also I'v checked individual hardware vendor sites for the latest drivers for windows 8. Most products has the drivers, And the current drivers also compatible with Windows 8 according to the upgrade assistant.
What should i do so? Will the win 8 upgrade useless in my system? or it will be better than the current win 7?
Yesterday, after many, many problems with my computer, I finally decided to reinstall Windows 8.1 Pro onto my ASUS X200CA netbook. However, after backing up and reinstalling the OS, I found that when I tried to disable "Launch CSM" in my BIOS, all of my boot options would disappear and my laptop would continually boot into my BIOS. When I re-enabled "Launch CSM", the boot options would reappear - however, it had not included the "Option #1 - Windows Boot Manager" that I had seen in my other installation.
View 2 Replies View RelatedI have windows 8.1 installed on 120gb ssd. I also have a 1tb HDD too. So I was trying to install Hackintosh/Linux when I noticed that the System Reserved partition was on my HDD instead of the SSD. So, I used easybtc to migrate my boot files to my SSD. I deleted the system reserved partition. Now I want to convert my BIOS to UEFI. I have Z87 pro mobo.
I tried this tutorial: [URL] ....
But it seems to be geared at the C drive, where I don't have room for that 350mb as disk utility wont let me shrink it.
Edit: would downloading a third party partitioner, shrinking C about 350mb, or whatever is the minimum, and then use that new space as described in the guide work?
Have just purchased this; HP Pavilion g6-2210sa 15.6" Laptop - Red Deals | Pcworld Upon hearing that I was up for the challenge of setting it up myself, the sales assistant pointed out that the very first thing I must do is back up the OS (windows 8).
I asked, 'oh, is the OS on a hidden partition?' .. and he said no, its in the BIOS. And I only have one chance to make a back-up copy, as soon as I switch on. Also; if I have software issues after that point, but haven't backed up the OS, I can't claim it under the manufacturer's warranty as an issue.
I believe that the .. key? .. is in the bios now, so I never have to worry about losing it, but apart from that .. egad.
Is there an auto-prompt, or do I need to do a regular ol' back-up .. and where do I back it up to, a separate hard drive/dvd etc?
So. I have this shiny, new, laptop. In it's shiny, new, unopened box, right now. And am starting to wonder if I should have coughed up the £50 to get 'em to set it up for me..!
I just got a FM2-A75MA-E35 motherboard and a installing Windows 8 on a freshly formatted SATA HDD. My BIOS see's the drive and has it second in the boot order, just after the DVD-ROM drive. It has a label with the drive serial number and everything, along with the drive being 'enabled' in BIOS. When I get up to the spot to choose what drive to install Windows to, its says 'No drives were found, please select a storage driver'. I found that it shows C: when I browse for drivers. Why this isn't working?
View 1 Replies View RelatedI bought an acer 756-2808 netbook last year with windows 7 from Amazon. This netbook came with a "upgrade to Windows 8. SoI did the upgrade when it was released.
Sadly, I probably only used netbook for a month or two because the LED screen cracked. They are pretty fragile.
Then, I upgraded to 8GB ram. This thing flies!
I downloaded 'produkey' from nirisoft.net, because I can't find the product key anywhere for the life of me.
So, now I have the product key for the current windows 8 installed. Will this upgrade product key work for a clean install? Moving on, I ordered a Samsung 840 Pro 128 GB which should be arriving in a few days.
Finally, I want to do a clean install of Windows 8.1 using a Windows 8 Product key. Is this possible? The original HDD on this netbook has nothing on it, so I don't really have to back anything up either (like I said I barely used it for two months before the screen cracked!)
I did some searches and found this link: [URL] .....
So if the above step is correct.
Do I:
1.) Get the ISO on the USB following the steps mentioned in the link above.
2.) Take out old HDD and install new SSD
3.) Reboot computer with USB
4.) ?
5.) ?
6.) ?
etc.
Are these steps incorrect?
Since I installed Ubuntu onto my computer, I couldn't boot the Windows 8. I tried installation DVD to repair, but it didn't work. I tried these solutions; solution1, solution2, none of them worked either. I tried refreshing, it stopped at 37%.
When I use diskpart to list partitions from command prompt via the installation DVD, I chose the right partition, but I couldn't activate it.
Before, my PC was setup like this:
- disk0: windows xp
- disk1: windows 7
Bios boot priority set to disk1.
So no boot loaders, when I (rarely) need xp, I would switch via bios
Now I wanted to try Windows 8, so I've
- download 'Windows 8.1 Enterprise Evaluation' and burnt on a dvd
- bought and connected a new disk (disk2)
- boot from dvd, installed choosing the new disk2
Now, everything works fine, Windows 8 got installed on disk2. But the strange thing is this:
- if, from bios, I choose disk2, it says the disk is not bootable
- choosing disk1, a boot loader shows up, letting me choose between win7 and Windows 8.1
(- choosing disk0, nothing has changed, xp starts like before)
So, I'm confused. I was expecting Windows 8 booting from the new disk2.
- why disk2 doesn't boot?
- would have been better physically disconnecting disk0 and disk1 before installing?
I've been salivating at the idea on installing W 8-64 Pro on a Dell Optiplex 755 at work. But a sudden reality check came over me & I realize Windows 8 doesn't necessarily work on older machines. The Dell is a Vista era machine. So maybe W 7-64 Pro would be a better choice?
View 9 Replies View RelatedHave any of you successfully installed Windows 8 with UEFI on a RevoDrive X2 (PCI-E express card)?
It starts the installation just fine for the RevoDrive X2 after loading it's drivers, but on first restart it...:
No boot drive found.Manually select to boot from the RevoDrive from the boot menu (F11), and it just restarts the installation again from scratch.
It installs and runs just fine with legacy BIOS (MBR) for the RevoDrive X2.
It also installs and runs just fine with UEFI on an internal SATA2 HDD.
Things I've done:
Bootable Windows 8 USB formatted as FAT32 w/EFI folder in itEnabled wake on PCI-E/PCM in UEFIBooting from USB from boot menu (F11) and not set to always boot from USB.
I'm wanting to upgrade my laptop to Windows 8. I currently have Ubuntu 12.10 installed alongside Windows 7. I've had a lot of trouble getting ubuntu installed and working (AMD graphics ) so I'd like to just leave that as is.
Is it possible to just install windows 8 over W7 in the same partition? How do I go about doing that? Is it as straight forward as just putting the disk in or is the whole secure boot thing going to cause issues? I want to do a clean install rather than using the upgrade assistant to install Windows 8 over W7.
Laptop with pre-installed Windows 8 on it. The salesman at the MediaMarkt said that these Laptops are already with pre-installed Windows 8 and also assured me that I can choose English as a language when I am running the laptop. But, when I installed it, the system chose German language and I am really having trouble to understand everything now. My Problem is here how to install Windows 8 with English language and another thing is when I installed the program, it has asked me an Microsoft E-Mail address, but by mistake I installed it with my gmx.de E-Mail address, which means that I am unable to use the Apps in the Computer as it has been asking only Microsoft account, I cant deactivate my gmx.de account which I used when I installed the OS Windows 8 to this Computer.
View 2 Replies View Relatedi just got a new computer, it came with windows 7 home premium pre installed, however it is not activated and it says i have 30 days to activate it.
however i dont have a key as i didnt purchase the OS, instead i have ordered Windows 8.1 64Bit Operating System DVD English OEI/OEM International and my dvd disc comes tomorrow so my question is, can i install windows 8.1 over windows 7? i would just put the disc in delete whats on the harddrive, format it and install my new OS right?
My Current Windows is Windows 8. I want to install Windows 8.1 .
My laptop comes up when installing Windows 8.1. I have chosen the language
In the page after when i want to install Windows the whole system in Hang. I cannot select any option on the page.
I have a Dell inspirion 15 laptop running Windows 8.1. A while ago I decided to try Ubuntu out. I installed it alongside Windows 8.1 in dual boot configuration with its own separate hard drive partitions. This means that when I powered on my laptop a GRUB menu (Linux boot manager) would come up allowing me to choose between Windows and Ubuntu. However, Ubuntu was more pain than it was worth so I decided to uninstall it. I did this by deleting the hard drive partitions that Ubuntu was installed on using Windows Disk Management. Now when I power on my laptop the GRUB menu still comes up but there are no options to choose from, only a command line interface. I now have to type Code: exit
which exits GRUB and takes me to my BIOS Boot Manager which looks like this:
Boot mode is set to: UEFI; Secure boot: OFF
UEFI BOOT
ubuntu (ST500LM012 HN-M500MBB)
UEFI Onboard LAN IPv6
UEFI Onboard LAN IPv4
Ubuntu (ST500LM012 HN-M500MBB)
Windows Boot Manager (ST500LM012 HN-M500MBB)
I then have to select Windows Boot Manager to boot into windows.
Why GRUB is still there even though I have deleted the Linux hard drive partitions? Also, why is Ubuntu still listed on the BIOS Boot options? And why is it listed twice?
Will updating my BIOS changs the date of installation? If not, does the BIOS need to be replaced for this to occur? I am trying to apply to a job but their software is telling them my computer is too old. I've checked and the date they are showing is the BIOS date exactly.
View 9 Replies View RelatedRight before I performed a clean install of Windows 8.1 x64 on my Inspiron 3520, I switched to the Legacy BIOS *facepalm*.
When I enter the legacy BIOS and enabled "secure boot", I performed a restart that gave the following message "internal hard disk drive not found, to resolve this issue, try to reseat the drive. No bootable devices--strike F1 to retry boot, F2 enter setup menu, F5 enter PSA". Of course, when I go back into the BIOS and disable secure boot, it reverts back to legacy and boots up Windows 8 just fine. What I'd like to know is, how can I revert back to UEFI so I can change the boot-up option and perform a clean install under UEFI.
Making the Switch to UEFI | sepago
[URL]