Will updating my BIOS changs the date of installation? If not, does the BIOS need to be replaced for this to occur? I am trying to apply to a job but their software is telling them my computer is too old. I've checked and the date they are showing is the BIOS date exactly.
View 9 RepliesThese are the steps I've taken-- OS Win 8, pre-installed by Acer.
1) Make recovery USB using the Acer recovery wizard, with the laptop in stock configuration.
2) Install msata as secondary drive
3) Go to Computer management and initialize the msata and format with GPT style. Format the drive, assign a drive letter. (I only see 1 partition). I did this as NTFS/default allocation size. Is this where I went wrong?
4) Remove the factory HDD (listed as HDD0 in BIOS)
5) Boot to BIOS
5a) in BIOS, disable secure boot.
5b) Go to legacy mode
5c) Set msata (HDD1 in BIOS) as #1 in boot order
6) boot to USB recovery drive, follow steps to restore from USB (clean install, make partitions as it wants)
7) remove USB, reboot.
Error message-- no bootable device. I can basically load the USB again or the BIOS.
I recently installed Windows 8 Pro on my Acer Aspire 5515 notebook. I set the time and date on the desktop clock, and every time I log in, the time and date are wrong and I have to reset them again. I have a dual boot setup with Windows 8 on one partition, and Ubuntu 12.10 on the other.
It doesn't appear to be an issue with the hardware of my computer, because the time and day stay set in Ubuntu. Some time ago, I was running a boot time diagnostic, and I got a warning the the was not timer connected to the apic...but that's all I could read before the message disappeared, I researched what I could and learned that this could and learned this had something to do with a physical component of my processor or related to my processor, but was unable to find out any more. As far as I know, this is the only hardware problem I have, and I thought this might be the cause of my erratic time/date.
I have some problems ....
1. My keyboard cant properly type in " without me inputting another input. so everytime i wanna type in " i need to click space just to make it appear. how do i make it normal?
2. My date and time keeps changing and it makes me lose track of time quite a lot. its already set to automatic internet time, but it keeps changing still. i keep changing it back, resyncing and stuff. How to make it stop?
I have 2 partitions: System Reserved (100mb) and Windows 8 (465gb). Windows 8 is marked as the system partition while system reserved is marked as Active & Boot. Is there any way I can like split windows 8, copy the files onto the new bit of unallocated space and make that partition the system partition instead of the "old" windows 8 partition?
View 1 Replies View RelatedSo I have linux ubuntu on my little homemade computer and finally was able to get a copy of windows 8.1 and how to just get rid of my ubuntu machine and boot windows I'm not trying to dual boot I just want to have windows on my computer finally.
View 6 Replies View RelatedI have windows 8.1 installed on 120gb ssd. I also have a 1tb HDD too. So I was trying to install Hackintosh/Linux when I noticed that the System Reserved partition was on my HDD instead of the SSD. So, I used easybtc to migrate my boot files to my SSD. I deleted the system reserved partition. Now I want to convert my BIOS to UEFI. I have Z87 pro mobo.
I tried this tutorial: [URL] ....
But it seems to be geared at the C drive, where I don't have room for that 350mb as disk utility wont let me shrink it.
Edit: would downloading a third party partitioner, shrinking C about 350mb, or whatever is the minimum, and then use that new space as described in the guide work?
Have just purchased this; HP Pavilion g6-2210sa 15.6" Laptop - Red Deals | Pcworld Upon hearing that I was up for the challenge of setting it up myself, the sales assistant pointed out that the very first thing I must do is back up the OS (windows 8).
I asked, 'oh, is the OS on a hidden partition?' .. and he said no, its in the BIOS. And I only have one chance to make a back-up copy, as soon as I switch on. Also; if I have software issues after that point, but haven't backed up the OS, I can't claim it under the manufacturer's warranty as an issue.
I believe that the .. key? .. is in the bios now, so I never have to worry about losing it, but apart from that .. egad.
Is there an auto-prompt, or do I need to do a regular ol' back-up .. and where do I back it up to, a separate hard drive/dvd etc?
So. I have this shiny, new, laptop. In it's shiny, new, unopened box, right now. And am starting to wonder if I should have coughed up the £50 to get 'em to set it up for me..!
I just got a FM2-A75MA-E35 motherboard and a installing Windows 8 on a freshly formatted SATA HDD. My BIOS see's the drive and has it second in the boot order, just after the DVD-ROM drive. It has a label with the drive serial number and everything, along with the drive being 'enabled' in BIOS. When I get up to the spot to choose what drive to install Windows to, its says 'No drives were found, please select a storage driver'. I found that it shows C: when I browse for drivers. Why this isn't working?
View 1 Replies View RelatedI have a Dell inspirion 15 laptop running Windows 8.1. A while ago I decided to try Ubuntu out. I installed it alongside Windows 8.1 in dual boot configuration with its own separate hard drive partitions. This means that when I powered on my laptop a GRUB menu (Linux boot manager) would come up allowing me to choose between Windows and Ubuntu. However, Ubuntu was more pain than it was worth so I decided to uninstall it. I did this by deleting the hard drive partitions that Ubuntu was installed on using Windows Disk Management. Now when I power on my laptop the GRUB menu still comes up but there are no options to choose from, only a command line interface. I now have to type Code: exit
which exits GRUB and takes me to my BIOS Boot Manager which looks like this:
Boot mode is set to: UEFI; Secure boot: OFF
UEFI BOOT
ubuntu (ST500LM012 HN-M500MBB)
UEFI Onboard LAN IPv6
UEFI Onboard LAN IPv4
Ubuntu (ST500LM012 HN-M500MBB)
Windows Boot Manager (ST500LM012 HN-M500MBB)
I then have to select Windows Boot Manager to boot into windows.
Why GRUB is still there even though I have deleted the Linux hard drive partitions? Also, why is Ubuntu still listed on the BIOS Boot options? And why is it listed twice?
Right before I performed a clean install of Windows 8.1 x64 on my Inspiron 3520, I switched to the Legacy BIOS *facepalm*.
When I enter the legacy BIOS and enabled "secure boot", I performed a restart that gave the following message "internal hard disk drive not found, to resolve this issue, try to reseat the drive. No bootable devices--strike F1 to retry boot, F2 enter setup menu, F5 enter PSA". Of course, when I go back into the BIOS and disable secure boot, it reverts back to legacy and boots up Windows 8 just fine. What I'd like to know is, how can I revert back to UEFI so I can change the boot-up option and perform a clean install under UEFI.
Making the Switch to UEFI | sepago
[URL]
It has an ASUS M2N-E motherboard with an old single core AMD Athlon 64 (I cannot remember which model specifically).
Last week, I provided him with a couple of old HDDs and 8GB worth PC-5300 DDR2 667 MHz RAM. We also installed Windows 8.1 64-bit, and other than the CPU being a single core and a bit slow, things were proceeding relatively smoothly.
He has an NVIDIA Geforce 8500 on the board, and he's ordered a PNY-made Geforce GTX 650 that's on it's way at present.
He's wanting to upgrade the CPU to the AMD PHENOM X4 9950, so we've been periodically meeting over the past couple of weeks to perform surgery on this old machine.
At any rate, we found that to update the CPU, we needed to update his BIOS from the one that was installed, which was at revision 0502. The needed BIOS revision for the CPU was 1504, but would also work with revision 1701.
After jumping through several hoops to update the BIOS, we updated it to 1701. However, since then the machine will not boot into Windows 8.1. He gets an instant BSOD. I did not see the error code, so I cannot say what it was. He told me that he's attempted to do a repair install to no avail. The repair attempt results in a constant loop of the machine rebooting and BSODing.
At any rate, here are some URLs that detail the board specs and the list of BIOS revisions for that board.
Motherboard Specs: Motherboards - M2N-E - ASUS
CPU Compatibility list: ASUSTeK Computer Inc. -Support- CPU Support M2N-E
I had a bit of a problem with Malware which led me to reinstall windows 8. I had also at the time been trying to install Linux to dual boot beside it. However, upon reinstalling I got the annoying watermark saying "Secureboot isn't configured correctly." Having decided I would rather remove the watermark and having gone back into the BIOS (with a reinstall) and trying to enable secure boot I get a message - "CSM is Loaded! Disable the CSM via Setup and repeat operation after Restart".
However there is, as far a I can see no option to disable the CSM in my bios - I've tried disabling anything related to Legacy and reinstalling both Ubuntu and Windows 8 as well as wiping the drive and jumping the CMOS as well as updating the BIOS.
I've tried every permutation in the BIOS. Could possibly be an incompatibility with graphics card, but wouldn't know where to start on that end if it is.
My problem is that I want to install a higher version of win 8, respectivily win 8 pro in a computer that already came with another version of win preinstalled (win 8.1). It's possible to do this in a bios that prevents csm launch.
View 1 Replies View RelatedHave a toshiba laptop with the UEFI encrypted windows 8 key. The hard drive was broken as it was dropped. No sticker on the bottom as is now microsoft policy. Download of the windows install needs the windows key. Cant get it as it's encrypted. Found generic windows 8.1 keys which worked but it said it was the wrong key for those installs. Generic windows 8 keys don't work for the download. Going around in circles and not sure what to do.
View 9 Replies View RelatedI am installing Windows 8 and the Gigabyte mainboard gives three options regarding the OS
Which one to choose??
Originally Posted by BIOS Windows 8 Features
Other OSWindows 8Windows 8 WHQL
Obviously it is one of the Windows 8 options. Both will unlock a few new settings like the Compatibility Support Module (CSM) or (not visible on the screenshot) Secure Boot. But the new options are exactly the same if WHQL is chosen or not.
Originally Posted by "Gigabyte GA B85M-HD3 Manual OS Type
Allows you to select the operating system to be installed. (Default: Other OS) So, which to chose and why and what do they do?
Question: How would you approach this migration?
I just bought a copy of Acronis True Image 2013 with Plus Pack. It appears that this is all I need as True Image will install the new motherboard drivers as part of the migration process. But do I stay with MBR or move to GPT?
Presently both Win7 (on a 120GB SSD drive) and Windows 8 (on a different 120GB SSD drive) are both MBR format. I don't want to start over from scratch. That's why I bought the Acronis 2013 with Plus Pack.
Will it be possible to boot Windows 8 from a GPT partition using BIOS (not UEFI)? I'll be using the 64bit version.
Technically, I know it's possible as I'm doing it with FreeBSD, many Linux distros etc. Using hybrid MBR/GPT, I've read others have Win7 booting off GPT partitons as all. I'd rather not go that route.
I'm trying to install windows 8.1 to an external hard disk (solid state drive 128 gb usb3).
I've tried easyUFEY WinToUS creator and AOMEI Partition Assistant Standard(Windows to go) with no luck.
My bios has UEFI option only(no legacy). On my old laptop it works just fine(I had the legacy option) but now, I cannot do that anymore.
I'm pretty sure it's a bios boot issue and I don't know how to fix it. I've tried using GPT partition instead MBR, Still nothing.
The laptop is a sony vaio duo 13 and I have no legacy option in bios
I am running windows 8 pro in a Intel i5 3470 + Gigabyte B75M-D3H system with UEFI bios .
I have two drives OS drive is a SSD & a 1 tb HDD with two partitions.
I am removing the SSD & want to transfer OS to one of the partitions on the HDD , the issue is boot files on the small 350mb system reserved partition on the OS drive , not sure how to transfer this partition or if this partion in on the SSD or the HDD.
This what my drives look like , C: is SSD :
Before i installed the SSD , I was running win 7 from the HDD installed in the 170 gb partition , to install the SSD i had to remove the HDD then do a fresh install of win 8 on the SSD & connected the HDD back later ,
The 170gb HDD partition is still untouched & has the old OS files , I want to transfer the SSD partition back to this 170gb partition i.e drive F: in the above pic . I am not sure how to transfer it & what to do with the system reserved partition .
Re-install windows 8 with new motherboard and CPU
I ended up managed to be able to boot into windows after i swapped out my motherboard and CPU to the new ones and everything seems to be working as it should, windows automatically installed the intel drivers and all my old programs and settings are there perfectly.
I can only boot into windows if i select my backup drive as #1 boot device in the BIOS, the SSD isnt even on the list.
The thing I don't understand lies in that, if i select my SSD as priority, where the directory of windows is installed, i get a bootmgr missing error - I've tried the various methods of recovering this using the cmd and a windows installation disc.
This isn't a huge issue but it's really tripping me out as to why this is occurring? I initially had some issues getting windows to boot so i installed a clean windows8 on this backup drive, i didnt change any settings at all. was only making sure that the SSD was being recognized and i hadn't corrupted it somehow. is it possible that the backup drive boot manager is directing it to the SSD.
I wanted to do a fresh windows 8.1 install (i have a samsung NP500P4C-T03CL notebook with windows 8 OEM preinstalled and when i updated to 8.1 the system went slow and "faily"). So i put the CD on the drive, but for my suprise when i reboted the system to enter the BIOS the F2 key didn't do the job, nor it appeared on the splash screen on samsung. After googling a lot and under trial/error concept i could enter the BIOS via Shift+Restart.
I did some changes to the BIOS booting set-up and noticed i have 2 Windows Boot Manager, the CD, the HDD and one option called "SETUP" that has a "!" ("!3.Setup"). So i tried every combination posible with Secure boot unabled, and UEFI+CSM OS, also with UEFI disabled, and none gave me the option to enter bios with F2, or recovery with F4. I managed to install win7 on another HDD. Main thing, besides the F2, F4, F8, F9, F12 (yes i prove all of them, even ESC), is that whenever i change the boot order it's not saved, and it is restablished to:
1. Windows Boot Manager
2. Windows Boot Manager
3. Setup
4. HDD
5. CD
Also i noticed that on the password options the one for the HDD appears grayed and as "FROZEN". I entered user and supervisor password, neither cleared the HDD one. i want to keep the BIOS update as a last resort. clearly it's not hdd related as the same thing happened when i tried another hdd with win7).
Yesterday, after many, many problems with my computer, I finally decided to reinstall Windows 8.1 Pro onto my ASUS X200CA netbook. However, after backing up and reinstalling the OS, I found that when I tried to disable "Launch CSM" in my BIOS, all of my boot options would disappear and my laptop would continually boot into my BIOS. When I re-enabled "Launch CSM", the boot options would reappear - however, it had not included the "Option #1 - Windows Boot Manager" that I had seen in my other installation.
View 2 Replies View RelatedI just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
Yesterday, I clean-installed Windows 8 Pro x86 on an old Dell Vostro 1400 laptop which had been running Windows 7 Ultimate, and it activated and ran fine, without even a single exclamation point in Device Manager. I applied the update necessary to make the Store offer 8.1 and proceeded to install it as I've done on a couple other machines. After downloading the thing, it errored out with:
Couldn't install Windows 8.1
Contact your PC manufacturer to see if you can upgrade the System BIOS
When I clicked the OK button, it then gave me the informative and grammar-challenged error box:
Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code: 0xc1900104
Try again Cancel
Ever the optimist, I clicked Try again, and of course, it proceeded to download all over again from scratch, only to error out in the same way. I then downloaded all the Windows 8 updates, although just the one had been necessary on my other machines that successfully upgraded to 8.1, and tried again, only to get the same result.
Today, I've discovered the Windows 8.1 Compatibility Assistant, which avoids the lengthy download of the upgrade every time (Microsoft, maybe you should run it implicitly before downloading 3 GB of transient data), and it tells me:
This PC doesn't meet system requirements
Contact your PC manufacturer to see if you can upgrade the System BIOS
Obviously, no BIOS updates are available, and what exactly is the problem here with my BIOS. The obvious googling turned up nothing except some people with Sony Vaios that had the same problem, which was corrected with a BIOS update, and of course, there is no information on what their BIOS update does to make the 8.1 upgrade possible.
I'm installed Windows 8 on my desktop. The Windows 8 Upgrade Assistant indicates that this software will install OK. It was NOT flagged as a problem.
However, when I went to install it, there were warnings that it wasn't supported and when I try it, I get errors about the registry.
How to use VB.NET, I don't understand it, and I'm used to VB 6.0. Is there a way to use VB 6 in Windows 8?
My laptop originally had Windows 8 installed on it on an SSD and an HDD. I have since wiped the drive clean. But now, I need to get Windows 8 back for work. How can I replicate the original layout with Windows 8 being put on both a SSD and a HDD. The nature of my work involves a lot of CAD software usage for projects as well as research and the like. As such, I would like for such software to be located on my SSD for faster speeds.
View 9 Replies View RelatedI've recently purchased a new laptop with a genuine windows 8, and then I upgraded to 8.1.
Is it possible to install with the same DVD using the same product key?
I have a Kingston SSDNow V200 128 GB SATA III 6 GB/s 2.5-Inch SSD I was using on my old Dell Precision 370. I now have a new Lenovo IdeaCenter K450 running Windows 8 X64 and I want to install the SSD in it.
This is what the drives look like now:
I want to clone the 1st 4 partitions plus the C: partition. I can reduce the size of my existing C: so everything will fit on the 128GB SSD. Anything I need to watch out for? I would think that cloning the existing setup should work. I will connect the SSD to the lowest SATA port, where the 2TB drive is now and move the other two drives up by one SATA port.