Windows 8 - How To Partition Hard Drive
Dec 29, 2013
I am new to Windows 8, and first time with a laptop. I have 1tb hard drive (minus a few gb) in c drive. d drive is being used as recovery
This is how it was setup. What I would like to do is to partition the amount of space i have from c drive into another drive.
Can manage to partition some hard drive space over to another driver letter, if i do a fresh install of windows, will this new drive be formatted too?
(Just asking this because when I owned a desktop computer, I had two drives. A c-drive and a d-drive. When I re-installed windows 7 on the desktop, all my files were still available on the d-drive, hence asking the above last question).
View 4 Replies
ADVERTISEMENT
Sep 15, 2014
i have Ultrabook Dell XPS 15 (Touch screen)
with 2 hard drivers (500GB SATA+ 32GB SSD )
now the question, when i re install windows 8.1
how i can partition the 32 SSD hard drive
should i install windows on it ? or just use it a a normal partition ?
View 9 Replies
View Related
Jan 25, 2014
I have a server with Windows 8 on a 360gb sata drive with 4 1.5TB drives as storage, which i had joined under Windows 8 to be seen as one drive. The system had been sluggish lately so was going to replace the 360gb with a ssd which i had used b4 on my laptop, so when i had it connected and started to install.
I seen 5.8 drive and ssd 12ogb drive and a few small partitions i deleted main partition on ssd and few other small partition which i thought was on the SSD but one was related to the storage drives and they are all screwed up now and when i connect the original Windows 8 os hard drive it doesn't boot anymore.
My question is whats the best way to proceed to save all the data on the hard drives nothing was formatted on theses drives.
View 2 Replies
View Related
Jul 4, 2013
I need to delete a recovery partition off my second hard drive. I've seen this link: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista - My Digital Life but it's for Vista and the final command "delete partition override" doesn't work in diskpart. It comes up saying "The specified command or parameters are not supported on this system"
Yes, I really do want to delete the recovery partition because it's on my secondary HDD, I still have the recovery partition on my C: so I'm really not losing anything ....
View 9 Replies
View Related
May 11, 2013
I have a USB hard drive which has two partitions:
1 x 100GB partition formatted as FAT32
1 x 900GB partition formatted as NTFS
(these sizes aren't perfectly correct, but it's a 1TB drive that's split in 1:9 proportions)
On my Windows 7 laptop, both partitions are visible in My Computer, and I can read/write with no problems. (On the same laptop, an Ubuntu install can also see and use them perfectly)
On my new Windows 8 laptop, the 100GB FAT32 patition appears under My Computer normally, but the 900GB NTFS partition does not. If I go to Computer -> Manage -> Disk Management, I can see the partition. It has no drive letter or file system listed, reports as "healthy, primary partition" and shows 100% free space. If I right click on the drive's entry in the list, my only options are "delete partition"; everything else is greyed out.
So, to summarise: One hard drive with two partitions. Both partitions work perfectly in Win 7 and Ubuntu. Win 8 can only see the FAT32 partition, and treats the NTFS partition as if it is junk.
way to persuade Windows 8 to mount this partition? I know that the drive and partition are fine, but for some reason Windows 8 isn't interested.
View 3 Replies
View Related
Jul 3, 2014
Here's my situation. My computer is running Windows 8.1 There is only 1 physical HD, but it has many partitions. Here is a picture of my current HD setup
The problem is that the WRE partition is literally sitting between my C and D drives, so when I shrink the C drive partition, I cannot extend the D drive with the unallocated space because it is not sitting right next to the D drive (I'm trying to shrink the C from 370 to ~60 GB, then extend the D from 550 to 850 GB with the C drive's unallocated space).
However, I found something called "AOMEI partition manager", which will let me shrink the C drive, extend the WRE partition with the unallocated space, and then shrink the WRE partition to get the unallocated space next to the D drive so I can extend it. So I'm basically using the WRE partition as a middleman between the C and D drives.
I'll still have the WRE partition (after extending and reshrinking it), my system partitions, recovery partition and everything like that. I just don't know if resizing the WRE partition like that will make it nonfunctional or something, even though all the data will still be on it.
FYI I have already created a full hard disk image with Acronis of the current hard drive setup before trying anything. I also have a USB drive that is bootable with a Windows 8.1 ISO that I was initially going to use to just completely format the hard drive and use Acronis as my recovery program instead of Windows recovery partitions, but I'm too worried about the EFI boot partition and all that stuff and possibly making my computer unbootable.
View 2 Replies
View Related
May 31, 2014
I'm trying to recover lost partition and files from external USB hard drive (Maxtor Portable 250GB). I'm using disk Internals sofitware and the software finds the files, but when I try to save them on the drive, each time I get a watchdog, or another BOSD error.
Here are the dumps.SF_31-05-2014.zip
View 2 Replies
View Related
Jul 17, 2014
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
View 9 Replies
View Related
Mar 5, 2013
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
View 3 Replies
View Related
Dec 26, 2012
I have a 2TB Western Digital My Book Essentials, it's filled with tons of old photos, movies, docs, games, and I'm scared to think of what else. The SATA to USB connector broke on it, so I took the drive apart and put it inside my computer. I opened up device manager because it wasn't showing up automatically and the 2TB is showing up as unallocated, I'm freaking out now because I'm scared the data was somehow deleted.What do I do?
edit: I realize also this isn't directly related to Windows 8 (besides the fact it's the OS I'm on), but I don't know where else to post it. I'd also like to say that I had a really deep feeling the drive was going to break continually for about two weeks before it happened, so if you have a similar feeling about something, don't ignore it!
View 9 Replies
View Related
Jun 22, 2014
Can you save to hard drive and One Drive at Same Time?
View 2 Replies
View Related
Jul 20, 2013
I tried to install 32 bit Windows 8 in my friends laptop through bootable usb. It has win7 preloaded. I tried for the dual boot. But when I select the partition drive it said that windows cannot be install in that drive because the selected drive is GPT partition style. How to install Windows 8 os in that GPT partition style hard drive.
Laptop has Hard disk-500 gb,64 bit win7.
View 3 Replies
View Related
Jul 10, 2013
I know there is good software out there to clone/image my hard drive and restore it to a new SSD drive. I'm just wondering though, since my laptop is brand new, I made a full recovery to a USB drive and included the OEM recovery partition.
Couldn't I just swap out the old HDD with the new SSD and boot with the recovery stick and do a full recovery back to the new SSD?
Also, however I do this, recover or image backup/restore, do I need to do some type of SSD alignment? I can't find a clear answer on that.
View 1 Replies
View Related
May 16, 2013
A few months ago my laptop broke and it needed repairs. The HDD was replaced and i got my laptop back with one new HDD inside and one "broke" HDD in a bag. Later the "Repaired" Laptop crashed again so i bought a new one and took the HDD out of the old laptop. I bought a HDD case with USB connection and both of the HDD's where intact. The oldest HDD contained windows 7 and the replaced contained windows 8. Now i want to sell the Windows 8 HDD so i want it to be clean of personal files but i want it to keep windows 8. I thought the solution was to run the windows 8 on the HDD so i can use the program deletation program of that windows 8. The problem is i dont know how to run windows 8 of a hard drive. I have searched the internet but with no success.
View 3 Replies
View Related
Aug 23, 2014
My wife just got a new PC running Windows 8.1 Pro and she wants to re-connect her external hard drive that has all her game files on it to the new PC.
While the new PC recognizes the drive it states that it needs to be initialized , doing so would wipe the data currently on the drive which would be unacceptable. How to get the new PC to recognize this drive and its data?
View 3 Replies
View Related
Aug 18, 2014
I have just tried to Refresh my Windows 8.1 installation, but when running the refresh Windows 8.1 came up with an error I have not seen before, let alone do the refresh.
It displayed a message saying "The Drive is Locked, you will have to unlock the drive to continue" so HOW do you unlock a Hard Drive?
How to do this before I either pull my hair out, or start from scratch and re-format the drive and do a complete new install of Windows 8.1
One thing I have done about a week ago which may be causing this problem is I converted the Drive from MBR to GPT and if this has locked the drive.
View 1 Replies
View Related
Sep 19, 2013
I have just bought a 4TB external USB 3.0 hard drive. The plan is to copy all of the data from my current internal 2TB drive to the 4TB, then I'm going to crack the case of the external hard drive open, take the drive out, and put it in my PC to replace the 2TB drive that's in there now (which I know will void the warranty). This isn't going to be a boot drive as I have an SSD for that.
I had read that Windows does not support large drives of this size and that it would show up as 2 partitions, so I was prepared to convert the drive to GPT in order to have 1 large partition. However, I connected the drive up to my Windows 8.1 machine and it shows as 1 large partition of 3.63TB, which is about what I expected.
Does this mean I don't have to convert the drive after all? Can I do what I'm planning to do and everything will work fine? Or do I need to convert it to GPT before I copy all of my data over and if so, how do I do that exactly?
View 5 Replies
View Related
Feb 22, 2013
My pc got stuck on a black screen after i restart it one time. When it finally lets me log in after turning the computer on and off manually, all of my programs were deleted, i couldn't access my computer's hard drive(?)(c:windows) , and i couldn't access system restore (or msconfig / any of the advance system tools). Any other way to do a full system restore without any of the pre mentioned options?
View 3 Replies
View Related
Apr 2, 2013
I have recently purchased and new computer with Windows 8. It's running smoothly, however I am encountering one particular problem.
My primary boot device is a 128GB SSD and obviously I want that space for the operating system install and some essential programs (photoshop, fireworks etc.).
My secondary device is a standard 1TB HDD. This is what I want to be my storage space for files, documents and non-essential programs.
The problem - Whenever I try to install a program to my second drive it comes up with the following error
"Error Writing to D:lahblahlahlah.xml. Verify that you have access to that directory"
I have check my permissions in the security tab and made sure that all the right check boxes are clicked. I have made sure to run the program as administrator and I've check to make sure that the directory is not set to 'read only'.
View 3 Replies
View Related
Apr 12, 2013
I successfully managed to create a virtual hard drive on my external drive to try boot windows 8 off it. I managed to boot it up and the login screen also appears as normal. I have a successful login, But on the second time login I am faced with black screen and the cursor. I'm aware that Microsoft has released a fix for this. I have attached the executable in the zip. I tried running this fix but it didn't work . After the black screen appears, even in safe mode I cannot run explorer.exe or open any folder to try running any executable files
View 2 Replies
View Related
Mar 7, 2013
My 60 GB C: drive ran out of room. The only thing installed on it is Windows 8 and whatever pre-installed programs came with my computer. I ran WinDirStat (WinDirStat - Windows Directory Statistics), a directory statistic tool and found two very large folders: C:/Windows is 22.2 GB and C:/ProgramData/Microsoft is 17.2 GB. This doesn't seem right. Can I free up room in these or are they both necessary? I read that windows 8 should take up around 20 GB, not 40 so how might I got about freeing up some space?
Also, I updated from Windows 7 about two months ago.
View 9 Replies
View Related
Jun 25, 2013
Well, since i installed Windows 8 Pro on my desktop, it already ate 26,8GB of disk space. I have no extra apps installed (posting this from Internet Explorer 10). How can i free some of that space?
View 9 Replies
View Related
Jul 24, 2014
I had been using my Dell Inspiron 15R 5521 with the factory installed Windows 8 Single Language version with a 1 TB Hard Drive. Its been over an year, i have been using it.
I used to install my programs in the C: Drive and separate my project related files, mp3s, etc in the D: drive so should their be any virus attack or anything unexpected, i could just format the C: Drive and have all my applications re-installed, which is no big deal for me.
Yesterday I had a very unexpected thing go down. My laptop started acting funny, it started restarted on its own over and over again and goes to the big blue screen notifiying me that the laptop had to be restarted.
Since i was under notion my D: Drive is safe, and the worse thing that could happen would a virus attack on the C: drive, i decided to refresh my PC because it was doing all sorts of weird stuff.
After refreshing my PC, I lost the entire D: drive.
Right now, my D: drive is my DVD drive. I can't figure out how to recover the other drive and its files. My Refreshing i had taken a backup as requested by the wizard but i couldnt view what all files are being taken as backup.
Looks like, it has only taken the backup of my C: Drive.
View 9 Replies
View Related
Nov 28, 2012
I just bought a lenovo Z580 with windows 8 and I also have a new hard drive coming. The first thing I tried to do was create factory restore disks so that when the new hard drive gets here I can remove the old hard drive and replace it with the new one and put the pre-installed windows 8 that came with the laptop on it. I can't however find a way to create factory restore disks. Is this still possible and if not what are my options for replacing a hard drive for this laptop and using the same windows install that originally came with it? I would prefer to not have to clone the hard drive because the new hard drive is an SSD so I will want to install windows with AHCI mode on.
Ultimately, I want to do a clean install of windows 8 on the new laptop using the existing pre-installed windows 8 key. I imagine this would be pretty simple if I had windows 8 install discs but I don't have those either as they didn't come with the laptop. what my options are to make this work?
View 9 Replies
View Related
May 16, 2014
I am running Windows 8.1 and it appears that my hard drive needs to be replaced. When the machine is turned on, frequently there is a slight screech and I feel it's best to replace the hard drive.
How do I make an exact bootable copy of the hard drive on a new hard drive and simply replace the drive with the new drive without having to reinstall Windows 8.1 or other programs and without affecting any of the files currently on the machine? If cloning software is required, are there any free programs I can download?
View 7 Replies
View Related
Feb 7, 2013
I've created a "Powered on machine" virtual installation of my Windows 8 on VMware VCentre Convertor to run in VMware Player, the size of the Hard drive was about 130GB, in the virtual machine I've deleted all my media files and uninstalled the large programs. The size of the C: drive is now 40GB which is more manageable for a Virtual Install which will be used to tweaking experimentation before I do it to my real Windows 8 installation.
How do I shrink the Virtual Hard drive from 130GB to say 45GB, I have installed the VM Tools and reading on the VMware website it saying you go to the VM Tools in the ghost install by right clicking it in the system tray or going to control panel on the ghost install and click on shrink. I have the icon in the system tray but the only right click options are about and there is nothing in control panel.
I have tried the "compact" option in the virtual machine settings by right click my Windows 8 virtual machine from the VMware player but it doesn't shrink the volume, it wirred away for an hour but the hard drive stayed the same size.
IF has Win 8 Pro 64bit in Wmware Player could they look to see if the shrink option is there on the Virtual install of Win 8 by right clicking VM tools in the system tray and clicking settings or options.
View 9 Replies
View Related
Apr 2, 2013
I have bought a 2TB western Digital external USB3 hard drive and installed the Asmedia drivers but windows never picks it up. See the screen capture. The drivers are the ASMedia USB 3 host controller but it seems to show up after a few seconds as USB Root Hub (xHCI) with a triangle. I have tried updating from there and directing it to the drivers and uninstalling and then reinstalling and the drive shows up long enough to copy but then disappears again.
I literally have run out of options.
It seems to be a common theme on the web and especially with Western Diital drives although I think it is windows struggling to recognise them and implement correctly.
View 2 Replies
View Related
Jan 22, 2013
I have installed Windows 8 on a fresh SSD drive and also connected my exsisting extra harddrive which I have previously used together with Windows 7. When I try to access that harddrive I get a "access denied" message even though I'm a administrator, what do I need to do to get access to my hard drive?
View 9 Replies
View Related
Feb 23, 2014
I have a 1TB hard drive with a lot of free space, and I would like to use some of this space to set up a home server that I will eventually publish a web site to. I'm very new to setting up home servers but I read something about setting up a storage pool in order to set up a server.
View 1 Replies
View Related
Oct 17, 2013
I have windows 8 installed on c drive and Linux mint installed on separate hard disk. Everything was working fine before I installed kubuntu from Linux mint. After installation I couldn't get into windows 8 because it was giving error message 0*c000000f. I tried to refresh Windows but no avail because windows has locked that drive and I couldn't access it. Than I decided to backup important files from windows 8 hard disk from Linux. I accessed windows 8 drive but three folders were missing "Windows" , "Users" and "Program Files(64)" other than that I can access all files and problem is all important data is in user folder.
Than I installed windows 8 on different partition still same thing cant access those three folders. Is there any possible way to simply access user folder?
View 2 Replies
View Related
Sep 15, 2013
HP Envy dv7, Windows 8
Seagate 2TB drive mounted in a Thermaltake, Max 5 enclosure. The drive does not show in Windows 8. Does show when running Disk Management (diskmgmt.msc) but shows as "Unallocated" without a drive letter. If run the Seagate drive tools, it shows up as unallocated, with drive letter "C". But there is obviously already a drive "C".
Disk Management does not present a means by which to assign a drive letter
View 8 Replies
View Related
