AOMEI Partition Assistant Standard To Add A NTFS Partition To USB Drive
Jul 17, 2014
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
View 9 Replies
ADVERTISEMENT
Jan 25, 2014
Any decent free/low-cost software package for recovering data from an NTFS partition? My Windows 8 has gone down and I suspect the file system has become corrupted.
View 5 Replies
View Related
Jan 30, 2013
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
View 9 Replies
View Related
Aug 10, 2014
I would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
View 9 Replies
View Related
Dec 12, 2013
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
View 3 Replies
View Related
Jul 22, 2013
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
View 1 Replies
View Related
Oct 14, 2013
I want to create a second primary partition on my first harddisk(disk 0 look at picture)
from the free space there in the extended partition(view screenshot). Now my problem is that whenever I want to create a new partition by right clicking and selecting "New Simple Volume" and selecting the formatting etc, I get another logical drive in the extended partition(look at picture below).
Is is not what I want. I want to move that free space out from the extended partition and add the unallocated 9 MB to it and then create a second primary partition on disk 0.
Note: If its possible I want to do this without using any third party software, IF POSSIBLE.
View 4 Replies
View Related
Feb 27, 2013
This is my basic spread prime contains a win 7 installation(active) halo contains a win 8 installation(boot) and is a logical partition What I need to do is: format prime and combine it with halo , this will be my boot and active keep logic and halo as it is an my logical drives I cannot lose data in halo or logic. how do I go about doing this ..
View 2 Replies
View Related
Sep 15, 2014
i have Ultrabook Dell XPS 15 (Touch screen)
with 2 hard drivers (500GB SATA+ 32GB SSD )
now the question, when i re install windows 8.1
how i can partition the 32 SSD hard drive
should i install windows on it ? or just use it a a normal partition ?
View 9 Replies
View Related
Jun 9, 2014
I am currently running Windows 8.1 pro, and I wanted to partition my main drive which is the C: Drive and on that partition run Windows 7 Ultimate.
How to partition the drive in Windows 8.1 but when it comes to doing a dual boot everything I have come across says I need to have Windows 7 installed first then I can add Windows 8.1.
There has to be a way to Run Windows 7 from Windows 8.1 on a dual boot or multi-boot as Windows 8.1 is my main and only OS I am running right now.
View 7 Replies
View Related
Dec 29, 2013
I am new to Windows 8, and first time with a laptop. I have 1tb hard drive (minus a few gb) in c drive. d drive is being used as recovery
This is how it was setup. What I would like to do is to partition the amount of space i have from c drive into another drive.
Can manage to partition some hard drive space over to another driver letter, if i do a fresh install of windows, will this new drive be formatted too?
(Just asking this because when I owned a desktop computer, I had two drives. A c-drive and a d-drive. When I re-installed windows 7 on the desktop, all my files were still available on the d-drive, hence asking the above last question).
View 4 Replies
View Related
Jan 28, 2014
I have laptop I gave to my nephew to use for a while for He's studying a basic computer course. I created add user account from it yet I do not test the drive D if it is readable, editable, or writeable, all the files I stored there. What I noticed was the Drive C of my personal files is fully isolated by password. So, my question is can I configure my Drive D too to view or read only my files for someone? I don't want to share because some files stored it contains terms and agreement.
View 3 Replies
View Related
Aug 11, 2014
I will be tri-booting Linux (elementaryOS and Debian) and Windows 8 on a laptop for college. On Linux, you can use a seperate partition and mount it to the /home folder.
Is it possible to do this on Windows 8? to mount the partition at C:/Users, to where instead of having a folder there, a data partition is accessed through the folder?
View 1 Replies
View Related
Jun 3, 2014
I have a 64GB flash drive I just bought to make a recovery for my laptop. I made the recovery partition just fine but its taking up 32gb when only using 21.5GB of space leaving over 10gb not usable. I am trying to shrink the partition to 24GB but it wont let me. Look at the attached screenshot.
Another question is my primary 1tb drive has a few extra 450MB partitions. What are they for?
View 4 Replies
View Related
Aug 25, 2014
I want to partition my C Drive to install Ubuntu 14.04 so I can dual-boot with Windows 8.1. When I tried to shrink the volume it wouldn't let me got higher than 4GB even though its a 500GB drive and I have over 259GB free. From looking at it the drive seems to have a few recovery partitions one being just under 24GB. Does the number of drive partitions factor into the amount of space I can give to a partition. Also if the recovery partitions are factoring into this can I move them to another drive or just outright delete them.
View 9 Replies
View Related
Aug 17, 2014
Misread the drive label and deleted the partition on an USB external 80GB SATA drive. Nothing else has been done to the drive.
I did this when using Macrium Reflect Rescue disc.
I know I've seen mention of a program that can recover the partition table but I've not found it yet.
I tried EASUS Data Recovery Wizard but that didn't do it. I thought maybe Paragon had something but I've not had any luck so far.
View 3 Replies
View Related
May 16, 2013
My C: is a SSD Id like to have back as one disc, one partition..
The 101 mb 'unallocated' It was previously listed as " reserved system protected drive" I removed and formatted its 101 mb...back to empty, unallocated, can I lose that partition??
It shows up under disc management as a part of c...but really has no drive letter at all it just shows as C:
View 3 Replies
View Related
Feb 22, 2012
WCP is just around the corner. Today I shrunk my drive and created 25 GB space for the same..But why is it marked as logical drive instead of primary partition?
View 9 Replies
View Related
Oct 10, 2013
I wish to purchase a new laptop that has Windows 8 OEM pre-installed on a 256GB SSD and a recovery partition. I would like to move the recovery partition to an USB drive using the feature available in Windows 8 and create another partition on the SSD for a different OS (linux). I have several questions:
1. Is there any difference between a recovery USB and the recovery partition on the SSD?
2. [Answered] If I completely wipe the original Windows 8 installation can I restore my system using the USB drive?
3. [Answered] During recovery, can I chose on what partition I want to install Windows 8 or create a new partition for it (similarly to a fresh install) or is the whole thing done automatically? I want to know if the recovery process wipes the whole SSD or only the Windows partition and if my other partitions will be left intact (I can live with it overriding the bootloader).
4. If I shrink the Windows 8 partition, can I still perform the recovery? (assuming that I have enough space for the installation).
View 7 Replies
View Related
Jan 25, 2014
I have a server with Windows 8 on a 360gb sata drive with 4 1.5TB drives as storage, which i had joined under Windows 8 to be seen as one drive. The system had been sluggish lately so was going to replace the 360gb with a ssd which i had used b4 on my laptop, so when i had it connected and started to install.
I seen 5.8 drive and ssd 12ogb drive and a few small partitions i deleted main partition on ssd and few other small partition which i thought was on the SSD but one was related to the storage drives and they are all screwed up now and when i connect the original Windows 8 os hard drive it doesn't boot anymore.
My question is whats the best way to proceed to save all the data on the hard drives nothing was formatted on theses drives.
View 2 Replies
View Related
Oct 27, 2013
I purchased a Lenovo laptop with Windows 8 Pro preinstalled. It came with 500 GB HDD. I changed the DVD Rom with SSD/HDD tray to use for additional drive. I put an SSD in there and installed Windows 8 on it using a USB Recovery Drive, which I don't have anymore. So my current setup looks like this:
After upgrading to Windows 8.1, the license of some software I'm using got messed up and I couldn't manage fixing it, so the only option I've got left is to reinstall/reset Windows. But since the Recovery partition is on another drive, when I go about creating a Recovery Drive, the option "Copy the recovery partition from the PC to the recovery drive" is greyed out. I've got stuff on my HDD, which I can't currently backup so I don't wan't to format that drive. I'm perfectly fine with formatting the SSD, that's what I want.
How can I reinstall/reset my Windows? The only option I see is to install Windows on the Hard Drive (by doing a backup and formatting it first), and then create a usb recovery drive and reinstall again on the SSD, but that's a lot of hassle and I'd need to find an external hard drive for the backup.
I intentionally left the Hard Drive in the original bay (as Disk 0) because of the better protection against falling compared to the added bay in place of the DVD drive.
View 4 Replies
View Related
Nov 1, 2013
Partition wizard - seems no way to create a USB bootable media -- if your PC doesn't have a physical DVD drive even the PAID PRO version doesn't show the create bootable media option. Machine doesn't have bootable CD.
Gone back to the FREE GPARTED program -- although it can take a lot longer to run when re-sizing / moving partitions.
(Another method -- a bit extreme though is to install Partition wizard on a Windows to Go system !!!)
The Partition wizard website is totally confusing too it shows a USB version but how to obtain it is unclear and the documentation is not good either.
View 3 Replies
View Related
Jan 14, 2013
I resized the main partition of the c drive and after the reboot something strange happened. I do have a mouse cursor but the screen is black. No metro, no regular desktop, nothing there. When I do control alt delete I get into task stuff and from there I can logon or log off users but all have the same result, a Black screen with only a mouse c cursor. No hardware changes done. Tried to do an auto repair but no result.
View 9 Replies
View Related
Jul 4, 2013
I need to delete a recovery partition off my second hard drive. I've seen this link: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista - My Digital Life but it's for Vista and the final command "delete partition override" doesn't work in diskpart. It comes up saying "The specified command or parameters are not supported on this system"
Yes, I really do want to delete the recovery partition because it's on my secondary HDD, I still have the recovery partition on my C: so I'm really not losing anything ....
View 9 Replies
View Related
May 11, 2013
I have a USB hard drive which has two partitions:
1 x 100GB partition formatted as FAT32
1 x 900GB partition formatted as NTFS
(these sizes aren't perfectly correct, but it's a 1TB drive that's split in 1:9 proportions)
On my Windows 7 laptop, both partitions are visible in My Computer, and I can read/write with no problems. (On the same laptop, an Ubuntu install can also see and use them perfectly)
On my new Windows 8 laptop, the 100GB FAT32 patition appears under My Computer normally, but the 900GB NTFS partition does not. If I go to Computer -> Manage -> Disk Management, I can see the partition. It has no drive letter or file system listed, reports as "healthy, primary partition" and shows 100% free space. If I right click on the drive's entry in the list, my only options are "delete partition"; everything else is greyed out.
So, to summarise: One hard drive with two partitions. Both partitions work perfectly in Win 7 and Ubuntu. Win 8 can only see the FAT32 partition, and treats the NTFS partition as if it is junk.
way to persuade Windows 8 to mount this partition? I know that the drive and partition are fine, but for some reason Windows 8 isn't interested.
View 3 Replies
View Related
Oct 1, 2013
Either with my startup today, or sometime in the last day or two, all my drives/partitions in Windows Explorer (and XYplorer) have lost their labels and are now showing as "Local Disk." Looking in Windows 8 Computer Management and EaseUs Partition Manager, the labels are there, as shown in the screenshot. I ran all three main repair modules of Yamicsoft Windows 8 Manager and there have been a few reboots, but still the same.
View 8 Replies
View Related
Jul 3, 2014
Here's my situation. My computer is running Windows 8.1 There is only 1 physical HD, but it has many partitions. Here is a picture of my current HD setup
The problem is that the WRE partition is literally sitting between my C and D drives, so when I shrink the C drive partition, I cannot extend the D drive with the unallocated space because it is not sitting right next to the D drive (I'm trying to shrink the C from 370 to ~60 GB, then extend the D from 550 to 850 GB with the C drive's unallocated space).
However, I found something called "AOMEI partition manager", which will let me shrink the C drive, extend the WRE partition with the unallocated space, and then shrink the WRE partition to get the unallocated space next to the D drive so I can extend it. So I'm basically using the WRE partition as a middleman between the C and D drives.
I'll still have the WRE partition (after extending and reshrinking it), my system partitions, recovery partition and everything like that. I just don't know if resizing the WRE partition like that will make it nonfunctional or something, even though all the data will still be on it.
FYI I have already created a full hard disk image with Acronis of the current hard drive setup before trying anything. I also have a USB drive that is bootable with a Windows 8.1 ISO that I was initially going to use to just completely format the hard drive and use Acronis as my recovery program instead of Windows recovery partitions, but I'm too worried about the EFI boot partition and all that stuff and possibly making my computer unbootable.
View 2 Replies
View Related
Sep 22, 2014
My windows 8 partition is inaccessible. Win 8 won't boot, even after attempted repair and running chkdsk.
This all happened after an automatic update.
I booted to another drive. Windows explorer shows the bad partition letter but no size or contents. Other partitions on the same drive are ok.
I also can see the bad drive contents from a cmd prompt.
View 4 Replies
View Related
Apr 8, 2014
My Toshiba Satellite Laptop has Windows 8. For some reason windows 8 wont load. It gets to the screen where you select which username you want. But from there its non responsive, I cant get into Windows, I cant restart to load it up in safe mode.
I got a Windows 8 disk which I had to change the bios to load it up. The cd loads but it says the automatic repair wont repair the laptop. I try to refresh windows 8 but I get a message saying the drive where windows is installed is locked. unlock the drive and try again. It also wont let me use system restore.
I try to use the reset pc option but I get a message saying unable to reset your pc, a required drive partition is missing.
At the start it gives me the option to install windows 8, I don't know whether to just do that? Is it ok to do with windows 8 already installed?
View 1 Replies
View Related
May 31, 2014
I'm trying to recover lost partition and files from external USB hard drive (Maxtor Portable 250GB). I'm using disk Internals sofitware and the software finds the files, but when I try to save them on the drive, each time I get a watchdog, or another BOSD error.
Here are the dumps.SF_31-05-2014.zip
View 2 Replies
View Related
Apr 7, 2013
I'm just going through the process of personalizing a new Inspiron 14z with Windows 8. The one thing that has me stumped are all the partitions that ship installed on the drive, due to a combination of everything being different on Win8, Dell doing things their own way, and GPT formatting. Generally I would like to know what the heck all those partitions are for, but it's fine if that will be a slow learning process. Specifically and immediately, I need to change the drive letter assigned to the "WINRETOOLS" partition. Currently it's D:, and the problem is that for 10 years I've been using D: as my data partition, and quite a number of applications, configurations, settings, etc. assume that all my files are on D:. For instance, by having all my music on D:, I can sync iTunes library and preference files between machines, and all ratings and playlists match from one machine to the next. Same thing for my photos. Same thing for a bunch of utilities like FTP consoles, sync utilities...
In a prior version of Windows, I would just go into Disk Management, right click the partition in question, assign a different drive letter, and job done. On my machine, the 2GB WINRETOOL partition doesn't even show as having a drive letter in Disk Management, despite the fact that it's D: in Win Explorer. Additionally, the only right click option is "help". I've taken that option, and, despite its aspirations, it's not useful.
How can I change that drive letter to something else? Should WINRETOOLS even have a drive letter in Explorer (some posts I've seen indicate that it should be hidden)? If I do manage to change the drive letter, will that break its function, whatever that is?
My machine has a 500GB spinning disk, which has all the aforementioned partitions. I've shrunk the C: partition to 80GB, in preparation for creating a data partition. I have not yet formatted the unassigned space as I would like to solve this WINRETOOLS thing first. Finally, there is a 32GB SSD that I've set up as an Intel Smart Response cache, and it's no longer visible to the OS.
View 3 Replies
View Related
