Apps / Software :: Partition Wizard - How To Create BOOTABLE USB Drive
Nov 1, 2013
Partition wizard - seems no way to create a USB bootable media -- if your PC doesn't have a physical DVD drive even the PAID PRO version doesn't show the create bootable media option. Machine doesn't have bootable CD.
Gone back to the FREE GPARTED program -- although it can take a lot longer to run when re-sizing / moving partitions.
(Another method -- a bit extreme though is to install Partition wizard on a Windows to Go system !!!)
The Partition wizard website is totally confusing too it shows a USB version but how to obtain it is unclear and the documentation is not good either.
I would like to make a flash drive bootable and I have looked at the utility that HP has called USB Disk Storage Format Tool and every place I have looked to find how to install and use it, the instructions that I have seen do not show up for me when I run the program. Where I can get some good instructions on how to create the flash drive.
I want to know how to create bootable flashdrive with multiple O.S???,so that when I want to install O.S i choose which one I will install, I only know how to create bootable one O.S in flashdrive.
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
My PC specs: Asus P8Z77-V with a SATA2 WD Caviar Black 500GB. The HDD has four partitions, and I've had Windows 7 32 bit installed on C:/ for three years. Windows 8 was just installed four months ago.
Before this, I had my Windows 8 and BIOS ahci-enabled C:/Windows 7 <> D:/Stuffs <> E:/Windows 8 <> F:/Stuffs
Yesterday, I needed some space on my F:, so I started Partition Wizard (I used this program a lot before with no problems) and cut 9gb from C, after that queue it to extend F: that much space.
Because C: is located first, but F: is located last, PW created 4 queue, which is cut -> move D: -> move E: -> extend F. The two first actions were performed fine, however when I restart as PW promoted, I was stuck at the BIOS, unable to access BIOS, with the red led lit on the P8z77-v, which means there was a problem with a boot device. If I unplug the HDD, the system goes into BIOS just fine, but obviously can't boot anymore.
There is a lot of important data on that disk which I can't afford to lose. My problem sounds almost like the same as this one: [URL] ....., however when he changes his BIOS to IDE mode, his HDD booted into Windows 7. However, mine doesn't. I've disabled Secure Boot, but that doesn't work either. It just stucks at the BIOS splash screen.
Currently I am considering to burn a PW CD and hotswap the HDD in order to fix the MBR and stuffs.
I just got an Asus R510DP-FH11 laptop (Newegg.com - ASUS R510DP-FH11 AMD A-Series A10-5750M (2.50GHz) 8GB Memory 750GB HDD 15.6" Notebook Windows 8 (64 bit)) and, after installing a bunch of updates, got Windows 8.1.
When I bring up the start menu, scroll down to the apps menu, and move the mouse at all, it instantly brings me to the desktop where "Asus Installation Wizard" will launch and then immediately tell me that I don't have the supported hardware (even though the Asus Live Update program tells me everything is fine and up to date). I can close it, but it just happens again and again when I visit the apps menu, and ONLY when I visit the apps menu. It doesn't happen on startup or any other time.
how to stop it from launching. I cannot do anything in the apps menu because of this.
I have a hp 475 homeserver with new upgrades. i'm trying to install windows home server 2011 on it. I want to put the whole sys on a bootable flash drive and install that way. I have ms dvd tool and software for iso files, now I think I need to combine all in a bootable flash drive for win 8.1
Whether I use Legacy or UEFI Mode, I can't get my PC to boot from flash drive, which was NEVER a problem before. It worked just fine, but now I tried Win Toolkit, RUFUS, and WinUSB maker with 2 different Windows 8.1 Update 1 ISO files (one by me and on by murphy). Neither worked. I reset BIOS settings completely, but that also didn't work - my PC sees the flash drive, but it just won't boot from it, without any error. If I force that flash drive to be the only boot drive, then it just takes me back into UEFI/BIOS without any error messages...
Can i ask is it okay to use the "Windows 7 USB/DVD tool" to create bootable windows 8 in USB?..if not how can i install the windows 8 in usb or to make it bootable in USB...so that i can do reformat in PC using my flashdrive or USB.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
I have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
I would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. How I can do this?
I bought an Acer notebook with Windows 8 SL (Single Language) and UEFI BIOS (with Secure Boot) factory installed (Windows Key is set in Bios).
I have the habit of installing all programs and make an image of partition C: in case of having to reinstall the entire system for problems with Windows, HDD exchange or similar cases. With this gain too long and not have to reinstall all the programs one by one.
My HDD is partitioned into 4 parts: C:, E:, F: and G:.
When I enter the Windows 8 app to generate the system image appear two partitions pre-marked for backup: C: (Programs) and EFI System Partition (no drive letter). C: partition is formatted as NTFS, but the EFI is as FAT32.
My question is: when I restore this, how should I format the partition where you install the system again (C ? Format all the partition as NTFS and Backup app creates the EFI partition FAT32 by own?
How it works and how to proceed? I will boot the system by CD-ROM.
I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
My new Toshiba laptop runs Windows 8, boots in UEFI mode and GPT formatted, can I create a logical partition solely for storage so that when I format/recover windows partition like windows system image restore, the files and folders stored in the partition is not affected?Just like I did in my old windows 7 laptop that boots in BIOS mode and MBR formatted, which I put the partition as D: drive? Are there any possibilities I do that without messing up the system?
I just purchased a brand new laptop (Lenovo s400) with Windows 8 (which was promptly updated to 8.1) and since I don't like having OS and personal files on the same disk, I used Partition Master for creating a new Partition to keep my files.
After PM rebooted the system, Windows doesn't boot and shows an error coded 0xc0000225. Lenovo adds a button to access System Recovery, but again I get the same error. As far as I can remember, I've never seen a recovery partition and no disks were included (Should've created a recovery USB drive as soon as I took it out of the box).
I would like to emphasize that this hard drive wasn't formatted, just re sized.
I finally broke down and bought a modern laptop Asus A55A (K55A) and installed Ubuntu 12.04 in a dual boot situation. With the nefarious secureboot and other such nonsense Windows 8 install met with an untimely demise. However, I have the files left on the recovery partition (copied to my 16gb usb) and need to make an install disk. My only issue is that I can't find a way to do it in Ubuntu as all the tutorials I find assume that Windows is installed. Is there a way to make a bootable Windows 8 install usb or iso from the files on the recovery partition-without using Windows to make it? I would love to re-install Windows 8 and then setup a stale dual boot.
I'm in the process of moving to an SSD and need to create a backup drive in order to repair the BIOS after transferring everything. However, when I try to create one - the create a recovery drive program won't recognize the flash drive I have connected as a flash drive.
I first tried with a SanDisk Cruzer which apparently had a quirk in that it shows up as a hard drive instead of removable flash drive. That seems to be well documented on forums all over the place and there is no fix.
So, I purchased a cheap 8 GB stick (no brand) and Windows (I'm running 8.1 x64) recognizes it as a removable disk. However, the create a backup utility still won't recognize it. I've found some random fixes that have worked for some (such as plugging it into a different USB port) but nothing has worked for me so far. I've tried doing it with the "copy the recovery partition" option both checked and unchecked.
If there's no solution to this wonderful "quirk" of Windows, then is there something else I can do to repair BIOS? Seems like there's not a fix to my problem out there...
EDIT So as of right now, I tried using HPs recovery software which seems to do the same thing as copying over your entire recovery partition. That didn't work either. However..when I had both USB sticks plugged in the Windows supplied utility recognized the SanDisk Cruzer when I checked the "copy the partition" thing
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
I have Windows 8.1 PC, then i installed EaseUS Partition Master 9.3 (All Editions), So i am having seperate ISO of WinPE, so i like to know "How to install WinPE on PC" because i want to Create EASEUS 3.9.0 Bootable CD.
I am having all the files like this below.
1)--EASEUS Partition Master 3.9.0 2)--WinPE ISO image ( in this iso there is no SETUP file is there, so how i should install this WinPE) If i install WinPE then i am able to create EASEUS Bootable CD.
I'm having a hard time trying to create a partition on the main HDD, in order to perform a Windows 7 installation, since Windows 8 is giving me several compatibility problems, and many software developers (e.g. Adobe Systems) said to me that Windows 8 support is not available since it isn't officialy released yet.
According to Windows 8 "Computer Management" utility (very similar to the Win7 one) the maximum size of available shrink space is up to 86 GB. Nevertheless I desire to create at least a 250 GB partition (HD is 1.5 TB and free space is 620 GB).
I found out on the internet this could be due to MFT files. I followed an old guide, run the Disk Cleanup Wizard, disabled system restore, the pagefile, the kernel memory dump and the hibernation mode. I morover run several instances of 3rd party defrag softwares such as Perfect Disk: I run the SmartPlacement, the defrag, the consolidate free space and the Prep for shrink tools, none of them with a positive result.
Though MFT files seems to be at a right place, around 5 GB from the disk beginning.
