I want to know how to create bootable flashdrive with multiple O.S???,so that when I want to install O.S i choose which one I will install, I only know how to create bootable one O.S in flashdrive.
I would like to make a flash drive bootable and I have looked at the utility that HP has called USB Disk Storage Format Tool and every place I have looked to find how to install and use it, the instructions that I have seen do not show up for me when I run the program. Where I can get some good instructions on how to create the flash drive.
I have a hp 475 homeserver with new upgrades. i'm trying to install windows home server 2011 on it. I want to put the whole sys on a bootable flash drive and install that way. I have ms dvd tool and software for iso files, now I think I need to combine all in a bootable flash drive for win 8.1
Whether I use Legacy or UEFI Mode, I can't get my PC to boot from flash drive, which was NEVER a problem before. It worked just fine, but now I tried Win Toolkit, RUFUS, and WinUSB maker with 2 different Windows 8.1 Update 1 ISO files (one by me and on by murphy). Neither worked. I reset BIOS settings completely, but that also didn't work - my PC sees the flash drive, but it just won't boot from it, without any error. If I force that flash drive to be the only boot drive, then it just takes me back into UEFI/BIOS without any error messages...
Partition wizard - seems no way to create a USB bootable media -- if your PC doesn't have a physical DVD drive even the PAID PRO version doesn't show the create bootable media option. Machine doesn't have bootable CD.
Gone back to the FREE GPARTED program -- although it can take a lot longer to run when re-sizing / moving partitions.
(Another method -- a bit extreme though is to install Partition wizard on a Windows to Go system !!!)
The Partition wizard website is totally confusing too it shows a USB version but how to obtain it is unclear and the documentation is not good either.
I'm in the process of moving to an SSD and need to create a backup drive in order to repair the BIOS after transferring everything. However, when I try to create one - the create a recovery drive program won't recognize the flash drive I have connected as a flash drive.
I first tried with a SanDisk Cruzer which apparently had a quirk in that it shows up as a hard drive instead of removable flash drive. That seems to be well documented on forums all over the place and there is no fix.
So, I purchased a cheap 8 GB stick (no brand) and Windows (I'm running 8.1 x64) recognizes it as a removable disk. However, the create a backup utility still won't recognize it. I've found some random fixes that have worked for some (such as plugging it into a different USB port) but nothing has worked for me so far. I've tried doing it with the "copy the recovery partition" option both checked and unchecked.
If there's no solution to this wonderful "quirk" of Windows, then is there something else I can do to repair BIOS? Seems like there's not a fix to my problem out there...
EDIT So as of right now, I tried using HPs recovery software which seems to do the same thing as copying over your entire recovery partition. That didn't work either. However..when I had both USB sticks plugged in the Windows supplied utility recognized the SanDisk Cruzer when I checked the "copy the partition" thing
When I first got this PC, I made the Recovery DVDs as instructed. Now, I want to make a Recovery Flash Drive, but HP only allows creation of one Recovery item. Is there a way to create a Recovery flash drive after I've already made DVDs?
Will there be issues if I try to create a Windows 8.1 USB Recovery Drive on a USB Flash Drive larger than 32GB? The Create a Recovery Drive actually formats the USB drive in FAT32 and makes it bootable. I plan to purchase a 64GB USB flash drive. Will the Recovery Drive Creator repartition the USB Flash Drive as a 32GB FAT32 partition? I tried the same on an external USB hard drive and it repartitioned the external hard drive as a 32GB FAT32 partition.
I started using a second monitor recently, and ran into an issue when opening a folder. When I try to open any folder both screens will flash grey and then go back to normal, but the folder won't open. If I try again then the folder will open with no grey flash. If I switch back to just one screen, the same thing will happen, along with all of my icons being rearranged.
Can i ask is it okay to use the "Windows 7 USB/DVD tool" to create bootable windows 8 in USB?..if not how can i install the windows 8 in usb or to make it bootable in USB...so that i can do reformat in PC using my flashdrive or USB.
Alright I did a back up of my system on flash drive but now i have to use it... How do I have to have the bios set up? So I can load this up right now my computer says operating system not found...
I got this new Asus Transformer which is a Windows 8.1 system.
I made a few images with Macrium Reflect and created an UEFI recovery Flash Drive (with Macrium) for the Macrium recovery program. I can set the BIOS to boot from the stick (in the temporary or permanent BIOS settings). Problem is, when I hit Enter, it ignores the stick and boots directly into 8.1.
Is there another setting in the BIOS that I have to make in order to have it boot from the stick.
Every time I put in my flash drive I go to computer and it won't show my flash drive. The computer makes a sound every time I put in my flash drive or take it out but I can't find where to open up the files from my flash drive. It shows up on devices and printers but it doesn't on computer. How do I open my files from it?
I own an Acer laptop that is runing Windows 7. I love Windows 7 and finally made the move from Windows XP but I really like Windows 8. Yet I'm nowhere near ready to make it my only OS. I know one possible option is a dual boot system. If I need to go that route I may be posting again in the future to find out how I can make a dual boot Windows 7/Windows 8 system. Yet I like trying different OS's and already have two USB sticks that are ChromeOS and Ubuntu Linux. I purchase 4GB flash drives and buy the fast drives.
The question is is it possible to install and then boot from a Windows 8 USB Flash Drive? If so, how would I go about doing this? Also, what is the minimum size USB Flash Drive that could be used? I want at least some room to work with and install apps but it won't be my primary OS. If it's not possible to do this how would I go about making a dual boot system? Already I have a 500GB HD with Windows 7 installed but I believe I'd have to repartition and hope to avoid having to reinstall Windows 7 since I have so many installed apps.
I tried to save 4 movies on a 4GB flash drive but only had room for 3. I then started over and compressed them to 4 zip files but the flash drive will still only hold 3.
I have a 64GB flash drive I just bought to make a recovery for my laptop. I made the recovery partition just fine but its taking up 32gb when only using 21.5GB of space leaving over 10gb not usable. I am trying to shrink the partition to 24GB but it wont let me. Look at the attached screenshot.
Another question is my primary 1tb drive has a few extra 450MB partitions. What are they for?
Have you ever successfully rescued your wanted data back from USB flash drive? In fact, I recently also formatted my USB flash drive mistakenly and all stored data was lost. But, many of these lost files there are still important and useful for me. So, I just wonder whether I can find a way to rescue them all back.
Since the last update I cannot use my Documents as I used to save them to flash drive. I tried not synching everything but they stay in Onedrive where I do not want them. It seems like Google's drive which I do not trust.
I inserted a SanDisk Cruzer 16 GB flash drive in my Win 8 laptop, and a window opened that had the Sandisk logo and it said installing Sandisk files or something like that, with a progress bar that took about 20 seconds to move across. It was not the pop up bubble you generally see by the tray when a driver is being installed, it was larger and in the middle of the screen. It seemed like some sort of autorunning application, which I thought Windows 8 does not allow. I don't see any Sandisk application in Programs and Features.
I have an 8GB flash drive that's write protected. There is no lock/unlock on the flash drive. How can I reformat/erase the contents so I can use the flash drive for other things? I've tried low level and that didn't work.
I have a pen flash drive with info from old PC. I already used it to transfer pictures to new PC with Win8, but now I cannot. I do not remember how to access it. I plug it into UBS port and... nothing. How do I access/find it in Wind 8?
I've been using File History with an external HDD. I now want to use a USB Flash Drive instead. Although my computer shows the flash drive in the devices area, I can't get File History to see the flash drive and use it for back ups. I'm running Win 8.1, and the flash drive is a USB 3.0.
When i power on computer, my usb flash drive isn't recognized right away. I need to re-plug the flash drive every time, when i power on computer, then it's recognized normally.
It's not such a big problem, but I have this usb flash drive always plugged at computer back side.