How To Create A New Partition In Windows 8.1
Nov 18, 2013I would create a new partition in Windows 8.1 , how to do it?
View 1 RepliesI would create a new partition in Windows 8.1 , how to do it?
View 1 Repliesi have installed windows 8.1
clean setup, i have erased windows partition and then created it
for some weird reason it would show me boot screen whether i have to decide to choose between Windows 8.1 and Windows 7 XE Loader
I bought an Acer notebook with Windows 8 SL (Single Language) and UEFI BIOS (with Secure Boot) factory installed (Windows Key is set in Bios).
I have the habit of installing all programs and make an image of partition C: in case of having to reinstall the entire system for problems with Windows, HDD exchange or similar cases. With this gain too long and not have to reinstall all the programs one by one.
My HDD is partitioned into 4 parts: C:, E:, F: and G:.
When I enter the Windows 8 app to generate the system image appear two partitions pre-marked for backup: C: (Programs) and EFI System Partition (no drive letter). C: partition is formatted as NTFS, but the EFI is as FAT32.
My question is: when I restore this, how should I format the partition where you install the system again (C ? Format all the partition as NTFS and Backup app creates the EFI partition FAT32 by own?
How it works and how to proceed? I will boot the system by CD-ROM.
I just purchased a brand new laptop (Lenovo s400) with Windows 8 (which was promptly updated to 8.1) and since I don't like having OS and personal files on the same disk, I used Partition Master for creating a new Partition to keep my files.
After PM rebooted the system, Windows doesn't boot and shows an error coded 0xc0000225. Lenovo adds a button to access System Recovery, but again I get the same error. As far as I can remember, I've never seen a recovery partition and no disks were included (Should've created a recovery USB drive as soon as I took it out of the box).
I would like to emphasize that this hard drive wasn't formatted, just re sized.
I finally broke down and bought a modern laptop Asus A55A (K55A) and installed Ubuntu 12.04 in a dual boot situation. With the nefarious secureboot and other such nonsense Windows 8 install met with an untimely demise. However, I have the files left on the recovery partition (copied to my 16gb usb) and need to make an install disk. My only issue is that I can't find a way to do it in Ubuntu as all the tutorials I find assume that Windows is installed. Is there a way to make a bootable Windows 8 install usb or iso from the files on the recovery partition-without using Windows to make it? I would love to re-install Windows 8 and then setup a stale dual boot.
View 5 Replies View RelatedOk so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
View 9 Replies View RelatedI am using windows 8.1. I have deleted my recovery partition by mistake. Is there any option to create again the same?
View 1 Replies View RelatedI'm having a hard time trying to create a partition on the main HDD, in order to perform a Windows 7 installation, since Windows 8 is giving me several compatibility problems, and many software developers (e.g. Adobe Systems) said to me that Windows 8 support is not available since it isn't officialy released yet.
According to Windows 8 "Computer Management" utility (very similar to the Win7 one) the maximum size of available shrink space is up to 86 GB. Nevertheless I desire to create at least a 250 GB partition (HD is 1.5 TB and free space is 620 GB).
I found out on the internet this could be due to MFT files. I followed an old guide, run the Disk Cleanup Wizard, disabled system restore, the pagefile, the kernel memory dump and the hibernation mode. I morover run several instances of 3rd party defrag softwares such as Perfect Disk: I run the SmartPlacement, the defrag, the consolidate free space and the Prep for shrink tools, none of them with a positive result.
Though MFT files seems to be at a right place, around 5 GB from the disk beginning.
I need to create a partition on my PC and I've followed tutorials but I always run into the same problem: Right clicking a volume in disk management only gives me a "help" option. I've connected external storage and it gives me the menu shown in the tutorials/how-tos.
Is there something I'm missing? I've followed all the steps to the letter, save for the ones that are not possible on my PC (shrink volume/etc)
Additional info: PC is an Acer Aspire V3-551 laptop
The HD was replaced a few months ago and the original OS updated to 8.1 from 8
I have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
A Dell technician replaced a new motherboard. Then, Windows 8 was restored using a provided Windows 8 recovery media DVD. Now, windows 8 runs super.
What I now found was that the original recovery partitions were disappeared. in the main hard drive.
I could not create a recovery drive (in flash drive) without recovery partitions in hard drive.
Is there a way to re-create the original recovery partitions ? If so, how?
My sony vaio laptop model is VPCEH26EN.I recently installed windows 8 pro 64 Bit.I formatted whole hard disk and installed windows 8.I had a oem recovery partition when i bought this laptop with windows 7 preinstalled. By this hard disk partition, I used to recover the whole windows to its factory condition by using F10 key. The recovery hard-disk partition was of only 11Gb.it contains the whole windows with some software already installed . But now i have no recovery partition now. How to create recovery partition with in 12GB for future purpose.The windows default system image creation usually taking 40 gb space. So its of no use. How to create a recovery partition which can be used to recover windows to its factory condition using F10 key in case of any error in future?
View 4 Replies View RelatedI would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. How I can do this?
View 1 Replies View RelatedI recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself
Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
My new Toshiba laptop runs Windows 8, boots in UEFI mode and GPT formatted, can I create a logical partition solely for storage so that when I format/recover windows partition like windows system image restore, the files and folders stored in the partition is not affected?Just like I did in my old windows 7 laptop that boots in BIOS mode and MBR formatted, which I put the partition as D: drive? Are there any possibilities I do that without messing up the system?
View 1 Replies View RelatedI have Windows 8.1 PC, then i installed EaseUS Partition Master 9.3 (All Editions), So i am having seperate ISO of WinPE, so i like to know "How to install WinPE on PC" because i want to Create EASEUS 3.9.0 Bootable CD.
I am having all the files like this below.
1)--EASEUS Partition Master 3.9.0
2)--WinPE ISO image ( in this iso there is no SETUP file is there, so how i should install this WinPE) If i install WinPE then i am able to create EASEUS Bootable CD.
Partition wizard - seems no way to create a USB bootable media -- if your PC doesn't have a physical DVD drive even the PAID PRO version doesn't show the create bootable media option. Machine doesn't have bootable CD.
Gone back to the FREE GPARTED program -- although it can take a lot longer to run when re-sizing / moving partitions.
(Another method -- a bit extreme though is to install Partition wizard on a Windows to Go system !!!)
The Partition wizard website is totally confusing too it shows a USB version but how to obtain it is unclear and the documentation is not good either.
I have a new Asus X102BA it has modest performance so as I have a spare OCZ 120GB ssd I thought I would see if it could be improved. I have tried to install win 8 Pro using a powered DVD drive but I get the message in my title. The primary partition is shown on screen and I have nothing but the DVD drive plugged into the computer...
View 5 Replies View Related1) When I create my partitions using the Windows 8.1 Setup Wizard, what cluster size does it put for my SSD?
2) How to check what cluster size I am currently on?
3) For SSDs, is it best to stick to the default 1024 cluster size or to manually create the partition using Disk Part and set it as 4096?
4) If your answer for 3 is to manually create them, what are the commands in Diskpart that I need to enter to have the 3 partitions ?
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
View 4 Replies View RelatedI would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
I want to create a second primary partition on my first harddisk(disk 0 look at picture)
from the free space there in the extended partition(view screenshot). Now my problem is that whenever I want to create a new partition by right clicking and selecting "New Simple Volume" and selecting the formatting etc, I get another logical drive in the extended partition(look at picture below).
Is is not what I want. I want to move that free space out from the extended partition and add the unallocated 9 MB to it and then create a second primary partition on disk 0.
Note: If its possible I want to do this without using any third party software, IF POSSIBLE.
This is my basic spread prime contains a win 7 installation(active) halo contains a win 8 installation(boot) and is a logical partition What I need to do is: format prime and combine it with halo , this will be my boot and active keep logic and halo as it is an my logical drives I cannot lose data in halo or logic. how do I go about doing this ..
View 2 Replies View Related[How To] : Create Windows 8 To Go Usb
Windows To Go is new feature included in Windows 8 by Microsoft and it allows you to install Windows 8 on your USB flash drive or USB external hard drive and then you can run Windows 8 from that Windows To Go USB on any Windows 7 capable PC without affecting its current OS installation.
Here - [URL] - is the guide. This is the easiest way to do it
How do you create a zip file in windows 8? Do you have to download software to do this?
View 6 Replies View RelatedI'm trying to create a virtual machine with Ubuntu in it.
I followed the instructions in this video step by step......and I have VM installed and running.
The problem comes when I try and go to the next step.
When I double click on the Ubuntu Icon in VM to start the Ubuntu install process, it should ask where the Ubuntu ISO file is, instead I get this message...
Here's my directory structure...
Virtual Box is installed in the 001 Virtual Box folder and the Ubuntu.vdi file is where you see it.
I've removed everything and repeated the process multiple times, but I always get the same result.