Hardware Drivers :: Unable To Create A Partition In Windows 8.1
Jan 20, 2014
I need to create a partition on my PC and I've followed tutorials but I always run into the same problem: Right clicking a volume in disk management only gives me a "help" option. I've connected external storage and it gives me the menu shown in the tutorials/how-tos.
Is there something I'm missing? I've followed all the steps to the letter, save for the ones that are not possible on my PC (shrink volume/etc)
Additional info: PC is an Acer Aspire V3-551 laptop
The HD was replaced a few months ago and the original OS updated to 8.1 from 8
I have a new Asus X102BA it has modest performance so as I have a spare OCZ 120GB ssd I thought I would see if it could be improved. I have tried to install win 8 Pro using a powered DVD drive but I get the message in my title. The primary partition is shown on screen and I have nothing but the DVD drive plugged into the computer...
I want to partition my C Drive to install Ubuntu 14.04 so I can dual-boot with Windows 8.1. When I tried to shrink the volume it wouldn't let me got higher than 4GB even though its a 500GB drive and I have over 259GB free. From looking at it the drive seems to have a few recovery partitions one being just under 24GB. Does the number of drive partitions factor into the amount of space I can give to a partition. Also if the recovery partitions are factoring into this can I move them to another drive or just outright delete them.
I bought an Acer notebook with Windows 8 SL (Single Language) and UEFI BIOS (with Secure Boot) factory installed (Windows Key is set in Bios).
I have the habit of installing all programs and make an image of partition C: in case of having to reinstall the entire system for problems with Windows, HDD exchange or similar cases. With this gain too long and not have to reinstall all the programs one by one.
My HDD is partitioned into 4 parts: C:, E:, F: and G:.
When I enter the Windows 8 app to generate the system image appear two partitions pre-marked for backup: C: (Programs) and EFI System Partition (no drive letter). C: partition is formatted as NTFS, but the EFI is as FAT32.
My question is: when I restore this, how should I format the partition where you install the system again (C ? Format all the partition as NTFS and Backup app creates the EFI partition FAT32 by own?
How it works and how to proceed? I will boot the system by CD-ROM.
I just purchased a brand new laptop (Lenovo s400) with Windows 8 (which was promptly updated to 8.1) and since I don't like having OS and personal files on the same disk, I used Partition Master for creating a new Partition to keep my files.
After PM rebooted the system, Windows doesn't boot and shows an error coded 0xc0000225. Lenovo adds a button to access System Recovery, but again I get the same error. As far as I can remember, I've never seen a recovery partition and no disks were included (Should've created a recovery USB drive as soon as I took it out of the box).
I would like to emphasize that this hard drive wasn't formatted, just re sized.
I finally broke down and bought a modern laptop Asus A55A (K55A) and installed Ubuntu 12.04 in a dual boot situation. With the nefarious secureboot and other such nonsense Windows 8 install met with an untimely demise. However, I have the files left on the recovery partition (copied to my 16gb usb) and need to make an install disk. My only issue is that I can't find a way to do it in Ubuntu as all the tutorials I find assume that Windows is installed. Is there a way to make a bootable Windows 8 install usb or iso from the files on the recovery partition-without using Windows to make it? I would love to re-install Windows 8 and then setup a stale dual boot.
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
I'm having a hard time trying to create a partition on the main HDD, in order to perform a Windows 7 installation, since Windows 8 is giving me several compatibility problems, and many software developers (e.g. Adobe Systems) said to me that Windows 8 support is not available since it isn't officialy released yet.
According to Windows 8 "Computer Management" utility (very similar to the Win7 one) the maximum size of available shrink space is up to 86 GB. Nevertheless I desire to create at least a 250 GB partition (HD is 1.5 TB and free space is 620 GB).
I found out on the internet this could be due to MFT files. I followed an old guide, run the Disk Cleanup Wizard, disabled system restore, the pagefile, the kernel memory dump and the hibernation mode. I morover run several instances of 3rd party defrag softwares such as Perfect Disk: I run the SmartPlacement, the defrag, the consolidate free space and the Prep for shrink tools, none of them with a positive result.
Though MFT files seems to be at a right place, around 5 GB from the disk beginning.
I have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
My sony vaio laptop model is VPCEH26EN.I recently installed windows 8 pro 64 Bit.I formatted whole hard disk and installed windows 8.I had a oem recovery partition when i bought this laptop with windows 7 preinstalled. By this hard disk partition, I used to recover the whole windows to its factory condition by using F10 key. The recovery hard-disk partition was of only 11Gb.it contains the whole windows with some software already installed . But now i have no recovery partition now. How to create recovery partition with in 12GB for future purpose.The windows default system image creation usually taking 40 gb space. So its of no use. How to create a recovery partition which can be used to recover windows to its factory condition using F10 key in case of any error in future?
I would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. How I can do this?
Windows 8 x64 OS, now unable to create a basic task from Task Scheduler.
Typed all args, click the Finish button in the last step, an error:
"Transaction support within the specified file system resource manager is not started or was shut down due to an error".
I have fixed it base on the URL below, but not luck. You cannot change the settings for a file backup operation or use Windows Task Scheduler to change the defrag schedule in Windows Vista. How to fix it.
I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
My new Toshiba laptop runs Windows 8, boots in UEFI mode and GPT formatted, can I create a logical partition solely for storage so that when I format/recover windows partition like windows system image restore, the files and folders stored in the partition is not affected?Just like I did in my old windows 7 laptop that boots in BIOS mode and MBR formatted, which I put the partition as D: drive? Are there any possibilities I do that without messing up the system?
First of all i was unable to configure my advanced power options, i.e- create new power plan, choose what power button does or closing lid does? I restored the settings & restarted but couldn't solve it. This is what i get while trying to fix this:-
Somehow, then i thought of creating another admin account and config the settings there, to see if it works out. But, through Control Panel>User accounts i couldn't manage existing account and neither i am able to create new account.
Another thing i noticed is when i go to PC settings through windows 8 new feature - charm menu, i couldn't find the Users menu. Now, these things are not normal at all.
I have Windows 8.1 PC, then i installed EaseUS Partition Master 9.3 (All Editions), So i am having seperate ISO of WinPE, so i like to know "How to install WinPE on PC" because i want to Create EASEUS 3.9.0 Bootable CD.
I am having all the files like this below.
1)--EASEUS Partition Master 3.9.0 2)--WinPE ISO image ( in this iso there is no SETUP file is there, so how i should install this WinPE) If i install WinPE then i am able to create EASEUS Bootable CD.
First of all i was unable to configure my advanced power options, i.e- create new power plan, choose what power button does or closing lid does? I restored the settings & restarted but couldn't solve it. This is what i get while trying to fix this:-
Somehow, then i thought of creating another admin account and config the settings there, to see if it works out. But, through Control Panel>User accounts i couldn't manage existing account and neither i am able to create new account.
Another thing i noticed is when i go to PC settings through windows 8 new feature - charm menu, i couldn't find the Users menu.
Partition wizard - seems no way to create a USB bootable media -- if your PC doesn't have a physical DVD drive even the PAID PRO version doesn't show the create bootable media option. Machine doesn't have bootable CD.
Gone back to the FREE GPARTED program -- although it can take a lot longer to run when re-sizing / moving partitions.
(Another method -- a bit extreme though is to install Partition wizard on a Windows to Go system !!!)
The Partition wizard website is totally confusing too it shows a USB version but how to obtain it is unclear and the documentation is not good either.
I accidentally deleted the EFI partition, required to boot into my Win 8.1 installation - unbeknownst to me that EFI partition was on a different disk to where my Windows is located. To complicate matters the Windows install is on a RAID0 array.
Windows repair using the original install media didn't work.
EasyRE didn't detect the RAID0 drive.I saw various instructions on how to reconstruct the EFI partition, but they all assumed that the EFI partition is still there, which in my case it isn't.how I can get my data off that drive and re-install Windows?
Basically I installed windows 8 on an SSD and partitioned one of my 2tb drives in order to install / transfers programs and documents etc into windows 8 from the old windows 7 install. This worked perfectly, however, windows is not not letting my format the windows 7 side of the partition so i can expand and let windows 8 have the full 2tb of storage!
Windows 7 is installed on E:, I think perhaps the bootmgr may lay inside of E hence why I can't format it.
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 8.1 Pro, 64 bit Processor: AMD E-300 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0 Processor Count: 2 RAM: 2666 Mb Graphics Card: AMD Radeon HD 6310 Graphics, 384 Mb Hard Drives: C: Total - 281129 MB, Free - 233356 MB; D: Total - 19850 MB, Free - 2098 MB; E: Total - 4055 MB, Free - 935 MB; Motherboard: Hewlett-Packard, 3577 Antivirus: Windows Defender, Disabled
I am trying to build a recovery drive on a USB flash drive for Win 8.1. I have been unable to copy the Recovery Partition from the PC to the recovery drive. It appears to be disabled when I view it from the Recovery Drive. I have discovered that in Windows 8.1 the recovery partition is installed in a INSTALL.WIM file format. How do I locate the Windows 8.1 INSTALL.WIM file and how can I register the INSTALL.WIM file as the Recovery Image on my PC?
I downloaded the Windows 8.1 Enterprise evaluation kit and became totally lost.
I previously had Windows 8 installed on my desktop - I've just booted to Windows 8.1 Pro Setup so I can install it on my desktop - I've formatted my hard drive from within the setup but when I try to install Windows 8.1 Pro on the partition, I get the following error message:-
'Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI Systems, Windows can only be installed to GPT Disks'
What can I do now as I don't have a version of windows installed anymore...
I'm unable to create a home group. when i try to do so, i'm getting an error message saying "Windows just detected an existing homegroup. To join it, click ok, and then open homegroup in control panel."
But the problem is, i don't have any existing homegroup on my pc. at the same time, there were no any other devices connected to my network. i tried with a pc aswell. but it didn't work, When i try to join, i'm getting an error like,
I'm running on win 8. i tried to clear all files on the folder
"C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking" and tried restarting the homegroup provider and listener and they were running. And ipv6 is also enabled.
I recently shrank my had drive and made a data partition. I then did a factory restore and installed windows on the c partition. Everything seemed to go well. I now can not see the D partition. It only shows up in Computer Management. It will not allow me to do anything with it. It is calling it OEM partition. What do I need to do to recover this?
My Toshiba Satellite Laptop has Windows 8. For some reason windows 8 wont load. It gets to the screen where you select which username you want. But from there its non responsive, I cant get into Windows, I cant restart to load it up in safe mode.
I got a Windows 8 disk which I had to change the bios to load it up. The cd loads but it says the automatic repair wont repair the laptop. I try to refresh windows 8 but I get a message saying the drive where windows is installed is locked. unlock the drive and try again. It also wont let me use system restore.
I try to use the reset pc option but I get a message saying unable to reset your pc, a required drive partition is missing. At the start it gives me the option to install windows 8, I don't know whether to just do that? Is it ok to do with windows 8 already installed?
