I recently shrank my had drive and made a data partition. I then did a factory restore and installed windows on the c partition. Everything seemed to go well. I now can not see the D partition. It only shows up in Computer Management. It will not allow me to do anything with it. It is calling it OEM partition. What do I need to do to recover this?
View 8 RepliesI am unable to move my boot data to another partition. Please have a look at the following picture-:
As you can see I have created a separate a partition before my C drive and formatted it.
I have used the following command to copy the boot data from my C drive to the System partition(S:)
bcdboot C:Windows /s S: /f BIOS
But as you can see C drive is still marked as "System" which means my PC isn't actually booting from drive S:.
How do I force my system to boot from drive S: and not drive C: ???
Recently I bought a new Asus Netbook, it has free DOS OS, I have installed windows 8, there were 3 partioned and I selected one of the drive. The problem is my C Drive (Boot Drive) is 40GB, D Drive is 13 GB, remaining all spaces are allocated to E Drive which has DOS OS. In Disk management my E drive is showing Active System, Primary Partion. I wanted to resize my D and E Drive. I tried to delete my E Drive but getting error message like windows unable to delete E Drive. Is there any way to delete this drive.. I want to join my D and E after that I want to re partion 90 GB's 3 additional partition.
View 9 Replies View RelatedI have a Windows 8 system on a SSD with about 200gb free on the left of the C: partition (left over from previous OS I dual booted). The ssd is gpt partitioned and boots using EFI.
I tried moving the partition to the left using Gparted which worked but windows wouldnt boot. I tried recreating the bcd files with no success. After doing some research I was lead to believe it was due to keys under HKLMSystemMountedDevices having the partition offset hardcoded as it would start to boot windows then crash with an error saying boot device inaccessible.
I got it booting again by moving the partition back to the correct position and recreating the bcd files again.
So are there any guides or tools that can move the partition to the left and update the relevant areas of windows so that it can boot? Or extend the partition to the left without breaking it?
I want to partition my C Drive to install Ubuntu 14.04 so I can dual-boot with Windows 8.1. When I tried to shrink the volume it wouldn't let me got higher than 4GB even though its a 500GB drive and I have over 259GB free. From looking at it the drive seems to have a few recovery partitions one being just under 24GB. Does the number of drive partitions factor into the amount of space I can give to a partition. Also if the recovery partitions are factoring into this can I move them to another drive or just outright delete them.
View 9 Replies View RelatedI accidentally deleted the EFI partition, required to boot into my Win 8.1 installation - unbeknownst to me that EFI partition was on a different disk to where my Windows is located. To complicate matters the Windows install is on a RAID0 array.
Windows repair using the original install media didn't work.
EasyRE didn't detect the RAID0 drive.I saw various instructions on how to reconstruct the EFI partition, but they all assumed that the EFI partition is still there, which in my case it isn't.how I can get my data off that drive and re-install Windows?
I have a laptop with Windows 8 installed in a 256Gb SSD. There's a 32Gb recovery partition whose purpose is to recover the drive to factory install. Since I already imaged this recovery partition to an external drive I would like to delete it and merge it to the main C partition to increase capacity. I know I can do this easily with 3rd party solutions (Easus, etc), but I'd like to do it using the Windows 8 built in Disk Management. I tried but when I right click on the 32Gb recovery partition the only option that shows up is "Help", it does not show any other option that shows for the other partitions (Shrink, etc).
View 9 Replies View RelatedBasically I installed windows 8 on an SSD and partitioned one of my 2tb drives in order to install / transfers programs and documents etc into windows 8 from the old windows 7 install. This worked perfectly, however, windows is not not letting my format the windows 7 side of the partition so i can expand and let windows 8 have the full 2tb of storage!
Windows 7 is installed on E:, I think perhaps the bootmgr may lay inside of E hence why I can't format it.
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1 Pro, 64 bit
Processor: AMD E-300 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0
Processor Count: 2
RAM: 2666 Mb
Graphics Card: AMD Radeon HD 6310 Graphics, 384 Mb
Hard Drives: C: Total - 281129 MB, Free - 233356 MB; D: Total - 19850 MB, Free - 2098 MB; E: Total - 4055 MB, Free - 935 MB;
Motherboard: Hewlett-Packard, 3577
Antivirus: Windows Defender, Disabled
I am trying to build a recovery drive on a USB flash drive for Win 8.1. I have been unable to copy the Recovery Partition from the PC to the recovery drive. It appears to be disabled when I view it from the Recovery Drive. I have discovered that in Windows 8.1 the recovery partition is installed in a INSTALL.WIM file format. How do I locate the Windows 8.1 INSTALL.WIM file and how can I register the INSTALL.WIM file as the Recovery Image on my PC?
I downloaded the Windows 8.1 Enterprise evaluation kit and became totally lost.
After a upgrade from Windows 8 to Windows 8.1, I seem to have lost my ability to use the recovery partition. Every time I go and use it I get an error message Unable to reset your PC. A required drive partition is missing.
I have contacted ASUS for recovery DVD's however I was told to go to a authorized repairer to have it fixed for a fee. My last laptop was able to burn recovery DVD's but not this one.
I understand that Windows 8.1 creates a new recovery partition for itself however I did read on this forum it is possible to get it back to default settings.
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Enabled
Windows RE location: ?GLOBALROOTdeviceharddisk0partition2RecoveryWindowsRE
Boot Configuration Data (BCD) identifier: ba08d678-3e5b-11e2-b26a-a34ba04e3737
Recovery image location: ?GLOBALROOTdeviceharddisk0partition5RecoveryImage
Recovery image index: 2
Custom image location:
Custom image index: 0
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 System 300 MB 1024 KB
Partition 2 Recovery 900 MB 301 MB
Partition 3 Primary 372 GB 1201 MB
Partition 4 Recovery 350 MB 373 GB
Partition 5 Recovery 20 GB 373 GB
not able to delete partition (21.85GB) and extend it to partition C
View 7 Replies View RelatedI need to create a partition on my PC and I've followed tutorials but I always run into the same problem: Right clicking a volume in disk management only gives me a "help" option. I've connected external storage and it gives me the menu shown in the tutorials/how-tos.
Is there something I'm missing? I've followed all the steps to the letter, save for the ones that are not possible on my PC (shrink volume/etc)
Additional info: PC is an Acer Aspire V3-551 laptop
The HD was replaced a few months ago and the original OS updated to 8.1 from 8
Alright, so my ASUS laptop has been getting a little slow lately, so I decided to reinstall. Now I know my PC has an ASUS recovery partition, which reinstall the pc with all the tools, drivers etc, since I've used it before. But now when I restart the computer and press F9 and reset, it doesn't work. This is what I do:
This is where it was supposed to give me the option to restore whole drive or just install windows to the primary partition. But now it asks for a CD, which I don't have. This PC never used to have a recovery CD, just a recovery partition.
Then, I read somewhere I could do the same from inside Windows 8, so I tried that as well by going to the charms bar, then Settings and then "Change PC settings". Then I selected "Update and recovery" from the left, and then went to Recovery, where I pressed the button to remove everything and reinstall windows. This is what I got:
So, I tried to see if EaseUs Partition manager showed the recovery partition. I started ASUS and these are the partitions it found:
I saw it found both a "Recovery" partition and a "Restore" partition. Now I assume the Recovery partition is the one Windows 8 boots into, and the Restore partition is the one created by ASUS. So, these are the contents of the Recovery partition:
And these are the contents of the Restore partition:
As you can see outlined in red, it does contain an install.wim file, so I know the recovery data is there. However the Windows 8 recovery environment just isn't able to find it.
I was using Ubuntu 14.04 on my laptop before. Now I want to install Windows 8. I have laptop's rescue CD. I get the following error when I tried to install Windows 8 on UEFI using the rescue CD:
"Unable to reset your pc a required partition is missing".
I think I have a problem about partitions type because Ubuntu uses ext4.
I have a new Asus X102BA it has modest performance so as I have a spare OCZ 120GB ssd I thought I would see if it could be improved. I have tried to install win 8 Pro using a powered DVD drive but I get the message in my title. The primary partition is shown on screen and I have nothing but the DVD drive plugged into the computer...
View 5 Replies View RelatedI have an Asus S200E and I had been messing with linux and trying to install it alongside windows 8.1 with no joy.After a while I gave up but i've had a few issues with my laptop and wanted to either refresh or reset it.
When I try to refresh I get a message saying that the drive is locked and when I try to reset I am told the recovery partition is missing. I guess I must have done something when attempting to install linux that has caused this problem however when I open up the partition manager the recovery partitions are all still there.
I previously had Windows 8 installed on my desktop - I've just booted to Windows 8.1 Pro Setup so I can install it on my desktop - I've formatted my hard drive from within the setup but when I try to install Windows 8.1 Pro on the partition, I get the following error message:-
'Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI Systems, Windows can only be installed to GPT Disks'
What can I do now as I don't have a version of windows installed anymore...
My Toshiba Satellite Laptop has Windows 8. For some reason windows 8 wont load. It gets to the screen where you select which username you want. But from there its non responsive, I cant get into Windows, I cant restart to load it up in safe mode.
I got a Windows 8 disk which I had to change the bios to load it up. The cd loads but it says the automatic repair wont repair the laptop. I try to refresh windows 8 but I get a message saying the drive where windows is installed is locked. unlock the drive and try again. It also wont let me use system restore.
I try to use the reset pc option but I get a message saying unable to reset your pc, a required drive partition is missing.
At the start it gives me the option to install windows 8, I don't know whether to just do that? Is it ok to do with windows 8 already installed?
I recently purchased an Asus X551 laptop with Windows 8 but straight the way uninstalled Windows 8 and installed Ubuntu (after creating a Windows 8 recovery drive just in case). I have since decided that I want Windows 8 back as I have found that I cannot use a lot of software on Linux. The laptop did not come with any form of recovery disk or installation disk, the only reminent of Windows 8 I have is the recovery USB that I created from within the OS.
When I plug in the USB and boot from it it brings up the recovery menu with options to reset the PC but when I click it it says something like - "Unable to reset PC. A required partition is missing".
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
I would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
I want to create a second primary partition on my first harddisk(disk 0 look at picture)
from the free space there in the extended partition(view screenshot). Now my problem is that whenever I want to create a new partition by right clicking and selecting "New Simple Volume" and selecting the formatting etc, I get another logical drive in the extended partition(look at picture below).
Is is not what I want. I want to move that free space out from the extended partition and add the unallocated 9 MB to it and then create a second primary partition on disk 0.
Note: If its possible I want to do this without using any third party software, IF POSSIBLE.
This is my basic spread prime contains a win 7 installation(active) halo contains a win 8 installation(boot) and is a logical partition What I need to do is: format prime and combine it with halo , this will be my boot and active keep logic and halo as it is an my logical drives I cannot lose data in halo or logic. how do I go about doing this ..
View 2 Replies View RelatedI have both windows 7 and windows 8 and I would like to have each operating system on a different partition (or even on a separate hard drive if it isn't possible). My windows 7 is 32 bit and I have both 32 and 64 bit of win8. The Windows 8 is a OEM system builder version. Is it possible to have both a 32 bit and a 64 bit on the same drive (partitioned of course) If not, would installing it on a separate hard drive work? My final question is: if I can get win 8 and Win 7 on my computer, could I still use some of the Win 7 software with windows 8 or would I have to download another version? I am using a Fujitsu lifebook T730, corsair ssd as primary drive, and a HHD in my disk drive bay.
View 4 Replies View RelatedI am trying to partition 25 Gigabytes of my hard drive to dual-boot Ubuntu, but when I go to "Shrink Volume" and try to shrink my C: drive, I can only shrink around half a gigabyte. I defragged it and it still won't shrink more than that. It is a 440GB drive and I still have 298GB free.
View 2 Replies View RelatedI just looked at the disk manager, and I see this:
I am not sure what those 19 gb are.. and is there a way to get them back ? If I right click on it only gives me an option to delete..
I'm having a problem connecting my laptop to an external monitor. I've encountered this problem a few times now. My external monitor will just stop working one day, and the only way I've found to fix it is to delete the keys located in the EFI partition.
After the keys are deleted I can reset EFI in the BIOS and the monitor will then be detected by Windows. It's getting to be really annoying having to reset EFI every couple days. So, I decided to see if I could unlock the EFI partition and try to remedy this problem.
So far I managed to set the partition as a basic data partition using SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Next, I assigned it a drive letter. But if I try to explore the contents I get an error saying "I don't have permission".
How to assign the correct permissions??