I am trying to partition 25 Gigabytes of my hard drive to dual-boot Ubuntu, but when I go to "Shrink Volume" and try to shrink my C: drive, I can only shrink around half a gigabyte. I defragged it and it still won't shrink more than that. It is a 440GB drive and I still have 298GB free.
View 2 RepliesI would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
My friend's computer has a hardware fault, and so I removed the drive to copy things off of it. I put it in an external enclosure, and it has 3 partitions. 1 is a HP tools one, another is a recovery partition, and the third is the main one named SYSTEM. It seems to be blank however, including hidden files, yet it says it's about 50% full. How can I get them to show up?
View 4 Replies View RelatedRecently I bought a new Asus Netbook, it has free DOS OS, I have installed windows 8, there were 3 partioned and I selected one of the drive. The problem is my C Drive (Boot Drive) is 40GB, D Drive is 13 GB, remaining all spaces are allocated to E Drive which has DOS OS. In Disk management my E drive is showing Active System, Primary Partion. I wanted to resize my D and E Drive. I tried to delete my E Drive but getting error message like windows unable to delete E Drive. Is there any way to delete this drive.. I want to join my D and E after that I want to re partion 90 GB's 3 additional partition.
View 9 Replies View RelatedI bought an Acer notebook with Windows 8 SL (Single Language) and UEFI BIOS (with Secure Boot) factory installed (Windows Key is set in Bios).
I have the habit of installing all programs and make an image of partition C: in case of having to reinstall the entire system for problems with Windows, HDD exchange or similar cases. With this gain too long and not have to reinstall all the programs one by one.
My HDD is partitioned into 4 parts: C:, E:, F: and G:.
When I enter the Windows 8 app to generate the system image appear two partitions pre-marked for backup: C: (Programs) and EFI System Partition (no drive letter). C: partition is formatted as NTFS, but the EFI is as FAT32.
My question is: when I restore this, how should I format the partition where you install the system again (C ? Format all the partition as NTFS and Backup app creates the EFI partition FAT32 by own?
How it works and how to proceed? I will boot the system by CD-ROM.
I want to reset my Windows 8 system but I have a question.
I've made a seperate partition (acts like a backup for situations like this). This partition stores my music, pics, documents etc.
If I reset Windows 8 will it also affect this partition, or just the partition where the OS is installed?
I have a question on ability to restore from an image based backup with a Win 8 compatible backup program (Acronis 2014 Premium), and not fully familiar with EFI. System is preinstalled Windows 8 on Asus F75 laptop, so disk is GPT.
Here are the partitions:
1. 300 MB EFI System Partition, FAT32
2. 900 MB NTFS Recovery Partition (would seem to be the MS Reserved partition)
3. 279 GB NTFS OS Partition
4. 398 GB NTFS Data Partition
5. 20 GB NTFS Recovery Partition
Forgetting about the 20 GB Recovery partition and the Data partition, if I wanted to return to a previous point in time for the OS, would I restore the OS partition (3), the MS Reserved Partition(2), AND the EFI System Partition, or would restoring the EFI System Partition not normally be done or recommended?
Last night clean installed windows 7 pro and noticed that system reserved partition is created with 100MB. Then upgrade it to windows 8 pro and finally updated it to windows 8.1 pro.
After complete installation of windows 8.1 pro and noticed in computer management that still system reserved partition is 100MB. whereas if in case i did clean installation of windows 8 pro then system reserved partition will be 350MB.
My HDD capacity is 2TB and i have nearly 1TB of unallocated space. C drive is 200GB
Therefore i would like to increase my system reserved partition from 100MB to 350MB.
How to increase system reserved partition from 100MB to 350MB with step by step ?
What is the advantages of allowing 350MB to system reserved partition in windows 8.1 pro?
I have an Acer Aspire E1-571 laptop with a 750 GB HDD partitioned in the following ways:
Recovery partition - 400MB
Recovery partition - 450MB
Recovery partition - 20GB
EFI System partition - 300MB
C: (boot, page file, crash dump, primary partition) NTFS - 338.07GB (31% free)
D: Data (primary partition) NTFS - 339.32GB (100% free)
My laptop keeps hanging, which I think could be due to the C: drive being so full. Sometimes it will hang with only a couple of tabs open in Firefox, and it has been known to hang on start up - though this is rare and hasn't happened for a while.
Task manager keeps saying 100% disk is being used (which leads me to wonder if it is to due with the free disk space in C: ) - and sometimes even task manager can hang. I have been wondering if utilising the D: partition could alleviate this problem.
I'm currently rewriting this on my phone due to the laptop hanging again. Since my HDD is partitioned into 3 recovery partitions, what is my D: Data for?
Can I merge it with my C: without adversely affecting my laptop?
Can I otherwise use my D: to store files safely?
Since it takes up almost half of my 750GB HDD space, I would find it odd if I was unable to utilise it and to find that it was also full of hidden recovery information. When someone (PC World) says they'll sell you a laptop with 750GB HDD space, they actually mean that they'll sell you one with less than half this free disk space?
The constant hanging has gone past infuriating and I would love to get it sorted - though even if it has nothing to do with freeing up space on the C: drive, I'd still love to know what this D: is for and if it can be used.
I have a server with Windows 8 on a 360gb sata drive with 4 1.5TB drives as storage, which i had joined under Windows 8 to be seen as one drive. The system had been sluggish lately so was going to replace the 360gb with a ssd which i had used b4 on my laptop, so when i had it connected and started to install.
I seen 5.8 drive and ssd 12ogb drive and a few small partitions i deleted main partition on ssd and few other small partition which i thought was on the SSD but one was related to the storage drives and they are all screwed up now and when i connect the original Windows 8 os hard drive it doesn't boot anymore.
My question is whats the best way to proceed to save all the data on the hard drives nothing was formatted on theses drives.
I've long been an XP user, just purchased a new desktop with 8.1 and a 2TB HDD this week.
I was partitioning some drives to organize things, and i am stuck.
On a 2TB drive, i have so far allocated 900GB over 4 drives for files, etc. [100,200,300,300]
I have 946.42GB left on my C, and i was hoping to get at least 2-3 more 200/300GB drives before leaving the remainder to C, but when i attempt to shrink my C drive, Disk Management tells me ive only got 20835MB/20GB available space to shrink. Wtf? I have literally added nothing to the computer except uTorrent, ive used Disk Optimizer to defrag the C drive 3 times, and still all of this space is unavailable? The OS has unmovable files scattered that loosely??
I have a Samsung Ultrabook series 5 laptop..some couple of month usage i completely remove my hard drive and change the windows 8 to windows 7..when i use windows 7 i realize windows 8 is much better then windows 7 so again i clean install of windows 8. i boot drive in PXE UEFI Only Mode. Some reserved partition created also 300MB Healthy Recovery Partition is Created.when i install a Samsung Recovery Solution Software it Says "Recovery Partition Does Not Exist"..What do i do.also when i refresh Pc it gives me Error "The Drive is Locked Where the Windows Installed" I want to make my Laptop like 1st time it was...
View 4 Replies View RelatedOn a friend's new Dell Windows 8 desktop I tried to create a system image using Windows 7 File Recovery. I got a message saying it could not create the image. The message said "windows backup failed to get an exclusive lock on the efi system partition".
View 9 Replies View RelatedMy system specs are :
FX-8350
ASUS M5A97 R2.0 (UEFI motherboard)
CM thunder 500W
Radeon hd 7870
8 gb ram [800 mhz]
seagate barracuda 7200.12 1TB
and
seagate barracuda 7200.11 250 gb
I have installed windows 8 on the 1 TB hdd 200GB partition
The problem I am facing is: UEFI Boot takes longer time
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
I want to create a second primary partition on my first harddisk(disk 0 look at picture)
from the free space there in the extended partition(view screenshot). Now my problem is that whenever I want to create a new partition by right clicking and selecting "New Simple Volume" and selecting the formatting etc, I get another logical drive in the extended partition(look at picture below).
Is is not what I want. I want to move that free space out from the extended partition and add the unallocated 9 MB to it and then create a second primary partition on disk 0.
Note: If its possible I want to do this without using any third party software, IF POSSIBLE.
This is my basic spread prime contains a win 7 installation(active) halo contains a win 8 installation(boot) and is a logical partition What I need to do is: format prime and combine it with halo , this will be my boot and active keep logic and halo as it is an my logical drives I cannot lose data in halo or logic. how do I go about doing this ..
View 2 Replies View RelatedI have both windows 7 and windows 8 and I would like to have each operating system on a different partition (or even on a separate hard drive if it isn't possible). My windows 7 is 32 bit and I have both 32 and 64 bit of win8. The Windows 8 is a OEM system builder version. Is it possible to have both a 32 bit and a 64 bit on the same drive (partitioned of course) If not, would installing it on a separate hard drive work? My final question is: if I can get win 8 and Win 7 on my computer, could I still use some of the Win 7 software with windows 8 or would I have to download another version? I am using a Fujitsu lifebook T730, corsair ssd as primary drive, and a HHD in my disk drive bay.
View 4 Replies View RelatedI just looked at the disk manager, and I see this:
I am not sure what those 19 gb are.. and is there a way to get them back ? If I right click on it only gives me an option to delete..
I'm having a problem connecting my laptop to an external monitor. I've encountered this problem a few times now. My external monitor will just stop working one day, and the only way I've found to fix it is to delete the keys located in the EFI partition.
After the keys are deleted I can reset EFI in the BIOS and the monitor will then be detected by Windows. It's getting to be really annoying having to reset EFI every couple days. So, I decided to see if I could unlock the EFI partition and try to remedy this problem.
So far I managed to set the partition as a basic data partition using SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Next, I assigned it a drive letter. But if I try to explore the contents I get an error saying "I don't have permission".
How to assign the correct permissions??
I recently shrank my had drive and made a data partition. I then did a factory restore and installed windows on the c partition. Everything seemed to go well. I now can not see the D partition. It only shows up in Computer Management. It will not allow me to do anything with it. It is calling it OEM partition. What do I need to do to recover this?
View 8 Replies View RelatedI recently made a partition for the (forget the exact name) but the I guess demo version of Windows 8. I will just upgrade to Windows 8 when it comes out. Is there a way to get rid of that partition, and just have my hard drive back to the way it was?
View 7 Replies View RelatedI have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
Any decent free/low-cost software package for recovering data from an NTFS partition? My Windows 8 has gone down and I suspect the file system has become corrupted.
View 5 Replies View Relatedi brought an HP Pavilion G6 and it comes with an GUID partition table (GPT), EFI and Secure Boot. However i need an MBR partition table, so i tried disk managerment but the option "convert to mbr" is greyed out and when i run the "diskpart - list disk - select disk 0 - convert mbr" i get an error "cannot convert a partition which has a pagefile on it" (disabling the pagefile didn t worked).
I guess my only other option is to format it, but the notepad comes with an lincesed Windows 8 which i dont wont to loose. So what are my options? I dont ave the CDs, as it s HP packet.
Update:I ve successfully formatted my Notebook. All i had to do is enter legacy mode, disable secure boot and boot from the Windows 7 DVD. So if you ave no intention using Win 8 it won t be a problem to "downgrade" in an UEFI/EFI System.
i have Ultrabook Dell XPS 15 (Touch screen)
with 2 hard drivers (500GB SATA+ 32GB SSD )
now the question, when i re install windows 8.1
how i can partition the 32 SSD hard drive
should i install windows on it ? or just use it a a normal partition ?
A Dell technician replaced a new motherboard. Then, Windows 8 was restored using a provided Windows 8 recovery media DVD. Now, windows 8 runs super.
What I now found was that the original recovery partitions were disappeared. in the main hard drive.
I could not create a recovery drive (in flash drive) without recovery partitions in hard drive.
Is there a way to re-create the original recovery partitions ? If so, how?