I recently made a partition for the (forget the exact name) but the I guess demo version of Windows 8. I will just upgrade to Windows 8 when it comes out. Is there a way to get rid of that partition, and just have my hard drive back to the way it was?
View 7 Replies I installed Ubuntu 14.04 a few weeks ago and I was happy about it, but I need to sell this PC and I need to install Windows in it. The problem here is that I erased the recovery partition by accident and I can't install Windows with a CD because my computer doesn't have a disk case, the model of my PC is Lenovo Yoga 11s.
I tried to make a booteable Windows 7 USB with Unetbootin, but the BIOS doesn't let me boot from the USB slot. My BIOS configuration was in Legacy Support and my USB was the priority to boot. My USB was formatted in NTFS. When I open the boot menu it take me to the Grub of Ubuntu.
I don't know what else to do... I just need to install Windows, it doesn't matter if is 7 or 8.
I had a computer with windows 7 home premium x64. A while ago I decided that I wanted to up grade to windows 8 and so I partitioned my os drive and installed (OEM) windows 8 Pro on the new partition. During the set up I was able to set up a duel boot system with windows 8 and windows 7. When I look at the drive structure I noticed that there isn't a system recovery partition for windows 7 or windows 8.
I would like to generate a system recovery partition for windows 8 and remove windows 7 but I am not sure how to go about doing this.
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
I would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
I want to create a second primary partition on my first harddisk(disk 0 look at picture)
from the free space there in the extended partition(view screenshot). Now my problem is that whenever I want to create a new partition by right clicking and selecting "New Simple Volume" and selecting the formatting etc, I get another logical drive in the extended partition(look at picture below).
Is is not what I want. I want to move that free space out from the extended partition and add the unallocated 9 MB to it and then create a second primary partition on disk 0.
Note: If its possible I want to do this without using any third party software, IF POSSIBLE.
This is my basic spread prime contains a win 7 installation(active) halo contains a win 8 installation(boot) and is a logical partition What I need to do is: format prime and combine it with halo , this will be my boot and active keep logic and halo as it is an my logical drives I cannot lose data in halo or logic. how do I go about doing this ..
View 2 Replies View RelatedI have multiple files and documents scattered on several computers and hard drives. They are In folders, in subfolders, in subfolders, in subfolders in subfolders.
How best to organize these and remove duplicates. I would expect this would also atrequire a significant proprietary program.
i did it on my laptop without putting my ms account on installation but now ive put it
View 6 Replies View RelatedJust upgraded to 8.1, and now I have an annoying ENG in the task bar.
I went through the tutorial on this page and it didn't seem to work.
cert_rem.jpg
i'm trying to remove the above mentioned (in pic) certificate using CMD (all the problem relies on using CMD which is what i need) i've tried those lines:
certutil -delstore Root 02ac5c266a0b409b8f0b79f2ae462577
certutil -delstore "Root" "DigiCert High Assurance EV Root CA"
(02ac5c266a0b409b8f0b79f2ae462577 is the certificate serial number)
and this is what i get in CMD:
Root "Trusted Root Certification Authorities"
CertUtil: -delstore command completed successfully.
Press any key to continue . . .
but again when i run Microsoft Management Console (mmc.exe), the stupid certificate is still there
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: AMD E2-3000 APU with Radeon(TM) HD Graphics, AMD64 Family 22 Model 0 Stepping 1
Processor Count: 2
RAM: 3546 Mb
Graphics Card: AMD Radeon HD 8280, 512 Mb
Hard Drives: C: Total - 453298 MB, Free - 397937 MB; D: Total - 22401 MB, Free - 2263 MB;
Motherboard: Hewlett-Packard, 2128
Antivirus: AVG AntiVirus 2014, Updated and Enabled
My hp laptop came with Windows 8 and I was not impressed. I heard that 8.1 was what Window 8 was supposed to be, so I did the recommended download on April 20,2014 and my laptop has worked terrible ever since. I can get some emails coming in, but I can send non out on the Incredimail that I have used for years. My hp Solution Center is not available because it has no download for this new operating system. If I use my web mail host email page, I can no longer open pdf files, when I try they just disappear forever. Other emails will just disappear as well, when I am reading another email. Sending messages on my Facebook page is no longer possible, it shows that it has left, but all parties I have sent to have received nothing. All of my system pages say I have Windows 8.1 now and I see know 8 anymore. If it is impossible to get rid of 8.1, how do I make it run properly?
I noticed that wsappx is occasionally consuming non-trivial amounts of my CPU.
Searching the internet, I learn that wsappx is not necessary for operation of my PC. One user suggests killing it via task manager.
When I tried to end the task I got a scary warning along the lines of "may render Windows unusable" I probably did not record the message accurately, and wsappx seems to have (temporarily?) gone away on its own.
disabling or uninstalling this task?
I copied and pasted a bunch of files into the same folder.
Now there is a lot of redundancy and too many files to be removed one by one.
There are all files with a "- Copy" in front of their original name.
How do I remove these files?
My c drive is starting to fill up, so I decided to move and reorganize some "stuff". Everything went fine and I have a full backup on an external 3TB drive. I also have two separate 2 TB external drives and all is fine.
My last task, before moving/deleting all my pictures and videos (30.000 in total) off my c drive, was to format all my other internal drives and/or remove/upgrade them to bigger ones and this is where I ran into a problem.
I have win 8.1 with all service updates as of today. My computer specs are all in my info.
I want to remove the drive G: and replace it with a 2TB one, I deleted everything from the old drive, but when I removed it, I got a boot error.
What I found was, that the hidden files in the picture bellow are still on it and needed to boot.
How can I move these files onto my C: drive?
I found one tip, to use this command: bcdboot c:windows /s c: but it didn't change the fact that the computer doesn't boot without the G: drive attached.
Here is a picture of my drives.
First i logged in via microsoft account ...then i removed and added a local account and i want to escape of this
View 9 Replies View RelatedI have 2 lots of Windows old files clogging up my drive.
Every time I try to get rid of them, there is an error of some sort, needs permission, is open in another program etc.
Is there a simple way to delete these without all of the questions etc? I just want to free up the space and get rid of the files.
I had a virus and needed to contact HP helpdesk but on start-up all my files now look like this "filename (2013_07_30 16_31_09 UTC)" HP said do this manually but not an option. how to remove the bracketed information?
View 1 Replies View RelatedThis just happened to me recently , I am unable to drag or delete files on the usb?, I tried the registry method, didn't work.
View 5 Replies View RelatedFirst off, when I type in Korean and Japanese using the appropriate Korean/Japanese IMEs, the language bar is autoset to Half_width alphanumeric. I want to remove all options except for Hiragana and Full-Width Katakana and set it so that when I change my language to Japanese it automatically sets to Hiragana. Similarly with Korean how do I remove the alphanumeric and leave only the korean language option? Secondly, is there a button is can use to fluidly tag between language options within an language? So for instance, if I'm in Japanese is there a combination of buttons to press such that I can change between Hiragana and Full-Width Katakana?
View 3 Replies View RelatedCan i remove this Metro thing? I deleted every tab i didnt need on it and it left me with a blank screen? Why cant it just integrate with the desktop similar to the side widget thing but faster? That way I can still have my start menu but then have live tiles on the desktop.
Anyway how do i remove metro and put my start bar back??? As I can't access any of my newly installed programs without going to Computer>C:Pogram Data> then the program folder and finding the actual exe...
I have some weird problem in Windows 8.
For some reason i can't remove ENG US Keyboard from language bar.
When i click 'Language preferences' i get this window
As you can see there is no ENG so that i can remove it! When i click on 'bosanski' options i get this:
As you can see there is no anywhere English so i can remove it. On Windows 7
I cannot remove the antivirus(BitDefender) that I downloaded. How can I remove it. I am using windows 8.1.
View 1 Replies View RelatedIt's possible remove this icon from this pc?
View 8 Replies View RelatedI recently tried the "sfc /scannow" command. It said it fixed corruptions and after a restart a "Windows 8.1 Pro" watermark showed. I tried to remove it using the My_WCP_Watermark_Editor.exe app. However, it gave me errors in various Modern Apps like the Windows Store app wherein it would crash whenever I type something in the search bar. I did the "sfc /scannow" command again and it fixed the Modern Apps errors but the watermark appeared again. How to remove this watermark it is very annoying. Don't tell me to activate my Windows because it is already activated. I can use the Personalization settings in the start screen.
It added the "Test Mode" and the "Build 9600" because I accidentally clicked the apply settings the first time opening the app. There must be some way to remove the annoying watermark...
I have a few Temp logons recently, and then had to copy my profile over to a new user account. Creation of the new user account seems to have gone pretty well, once I signed into my Microsoft account, everything associated with it is as it should be.
However, there a few of the older "Users" listed under This PC, which are not shown at the manage accounts page. Is there a simple way to delete the old accounts that are not in use. Deleting hem from file explorer did not work.
This PC: I'd like to delete "ADMIN 2" and "Andrew"
i had windows 7 installed and i installed windows 8 on my other partition and after some days i did a format on win7 partition but the dual boot menu is still there any solution to remove that ?
View 2 Replies View RelatedCapture.JPG I want to remove watermark. Have any people know that.
View 9 Replies View Related