Creating 2nd Primary Partition From Extended Partition?
Oct 14, 2013
I want to create a second primary partition on my first harddisk(disk 0 look at picture)
from the free space there in the extended partition(view screenshot). Now my problem is that whenever I want to create a new partition by right clicking and selecting "New Simple Volume" and selecting the formatting etc, I get another logical drive in the extended partition(look at picture below).
Is is not what I want. I want to move that free space out from the extended partition and add the unallocated 9 MB to it and then create a second primary partition on disk 0.
Note: If its possible I want to do this without using any third party software, IF POSSIBLE.
I have dell 14r special edition with win8. i'm trying to partition the drive and create extended partition. however the factory image is stored at the end of drive and all of the drive is considered as primary drive. i've two options
1. Delete or move the partition. if i do that will the recovery work. 2. Burn the factory image and delete the partition. but your backup software is not working for me to backup the image.
This is my basic spread prime contains a win 7 installation(active) halo contains a win 8 installation(boot) and is a logical partition What I need to do is: format prime and combine it with halo , this will be my boot and active keep logic and halo as it is an my logical drives I cannot lose data in halo or logic. how do I go about doing this ..
My system was dual booting Windows 8 and Windows 7. I have deleted the Windows 7 option from the msconfig of Windows 8. Now the system boots automatically into Windows 8 with no problems. If I delete/ format the Windows 7 partition through Windows 8, will it cause any problems?
Also, I found that Windows 7 partition is marked as primary, while the Windows 8 is logical. I
Windows 8 is in C Drive (You can see that its logical)
Windows 7 was in E Drive
There is also a 2.50 GB Simple Basic FAT32 partition with status as - Healthy (System, Active, Primary Partition) - What is this?
PS: I do have EasyBCD 2.2 and MiniTool Partition Wizard Server Edition Installed. The latter is not able to modify C drive and set it as primary.
WCP is just around the corner. Today I shrunk my drive and created 25 GB space for the same..But why is it marked as logical drive instead of primary partition?
I just bought a new laptop - an ASUS N550JV - with a single 1TB hard drive. I specifically sought a 1TB hard drive because I intend to store a lot of photos on the laptop and already have over 600GB of photo data to store.
When I got the laptop the first thing I did was to go through the windows update process to get everything up to date, then I upgraded to Windows 8.1 (the laptop came with Windows 8), then I ran the windows update again until everything was up to date.
It was only then that I opened up file explorer with the intention of setting up a basic folder structure for the files I planned to transfer to the laptop. I was dissapointed, at that point, to discover that instead of a single 1TB C: drive, I saw a 370+ GB C: drive and a 530GB + D drive. I confirmed with system information that there is indead just a single drive, and that it thus came partitioned into 2 primary volumes (which, btw, still don't add up to 1TB BTW!). This setup really doesn't work for me, because the "larger" volume is still too small for all my photos, and it would be illogical and inconvenient to have to split up the photos so that some were on the C drive and some on the D drive.
Could I somehow merge the two partitions back into one primary drive, or at least re-size them so that the D drive had at least, say, 750GB, and shrink the C drive accordingly. He pointed me to the Disk Management utility and directed me to delete the (still empty) D drive, which would make that storage space unallocated, then extend the C drive to use that unalocated space. I was able to delete the D drive, and confirmed that there was now 530+ GB of unallocated space. However, when I click on the C drive the option to extend is greyed out.
I did a bit of Googling at this point and discovered that you can can only extend to contiguous unallocated space, and the unallocated space was NOT contiguous - there is a 350MB "Recovery Partition" between the C and D (or unallocated) spaces. In fact, there were multiple recovery and other partitions. (From left to right: 100MB "EFI System Partition", 900MB "Recovery Partition", 370+GB "Primary" C Drive with Boot etc, 350MB "Recovery Partition", 530+GB "Primary" D drive, and 20+GB "Recovery Partition").
Of course I would be too scared to delete the recovery partition, but there's no option to do so anyway ...
I asked the family member again and he suggested creating a USB Recovery Drive and, in the process, wipe the recovery partition. So used the windows utility to create a recovery drive, and sure enough, at the end it asked if I wanted to delete the recovery partition and I said yes. The good news is that this removed the 20GB partition, and I was able to extend the D drive to use that newly unallocated space. The bad news is that the 350MB recovery partition still lies between the C and D drives, preventing me from merging the two.
Again through Googling I found that there are tools I could use to force delete the recovery partition, but I'm afraid to do so and kill my computer or recovery options all together. I also heard that this 350MB recovery partition was created when I upgraded to 8.1, and that rolling back to my factory setting won't remove the partition?
So the question is, what can I do? Is there an easy way to "move" the recovery partition to the end of the drive without breaking any functionality that it might have? What would happen to my computer if this recovery partition were to "break" or get removed? Is it best that I just "live with it" the way it is despite the inconvenience?
I have a new Dell 5537 comes with Windows 8.1. Day before, I tries to create a new partition in C: where is the the OS sits. After created an unallocated partition, I did not format it, jjust restart my laptop. Then it won't start. Even I use its Recovery disks, it cannot recover my system. NOW, I can see the Partition detail: 1: ESP Total 500MB Free 494MB SYSTEM2. DIAGS Total 40MB Free 35MB PRIMARY3. Total 128MB Free 128MB MSR(RESERVE)4. Total 2GB Free 1.7GB RECOVERY5. Total 920.6GB Free 920.4GB PRIMARY6.PBR IMAGE Total 8.2GB Free 4.3GB RECOVERY#5. Partition is where I have created a new partition but not format yet. Now I have a new Widnows 8.1 image file and tried to install in this partition, but it gave me an message: "WINDOWS CANNOT INSTALL, IT IS OF GPT PARTITION STYLE". so that I can install my new Windows 8.1 in this partition.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
I would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
I have both windows 7 and windows 8 and I would like to have each operating system on a different partition (or even on a separate hard drive if it isn't possible). My windows 7 is 32 bit and I have both 32 and 64 bit of win8. The Windows 8 is a OEM system builder version. Is it possible to have both a 32 bit and a 64 bit on the same drive (partitioned of course) If not, would installing it on a separate hard drive work? My final question is: if I can get win 8 and Win 7 on my computer, could I still use some of the Win 7 software with windows 8 or would I have to download another version? I am using a Fujitsu lifebook T730, corsair ssd as primary drive, and a HHD in my disk drive bay.
I am trying to partition 25 Gigabytes of my hard drive to dual-boot Ubuntu, but when I go to "Shrink Volume" and try to shrink my C: drive, I can only shrink around half a gigabyte. I defragged it and it still won't shrink more than that. It is a 440GB drive and I still have 298GB free.
I'm having a problem connecting my laptop to an external monitor. I've encountered this problem a few times now. My external monitor will just stop working one day, and the only way I've found to fix it is to delete the keys located in the EFI partition.
After the keys are deleted I can reset EFI in the BIOS and the monitor will then be detected by Windows. It's getting to be really annoying having to reset EFI every couple days. So, I decided to see if I could unlock the EFI partition and try to remedy this problem.
So far I managed to set the partition as a basic data partition using SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Next, I assigned it a drive letter. But if I try to explore the contents I get an error saying "I don't have permission".
I recently shrank my had drive and made a data partition. I then did a factory restore and installed windows on the c partition. Everything seemed to go well. I now can not see the D partition. It only shows up in Computer Management. It will not allow me to do anything with it. It is calling it OEM partition. What do I need to do to recover this?
I recently made a partition for the (forget the exact name) but the I guess demo version of Windows 8. I will just upgrade to Windows 8 when it comes out. Is there a way to get rid of that partition, and just have my hard drive back to the way it was?
I have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
Any decent free/low-cost software package for recovering data from an NTFS partition? My Windows 8 has gone down and I suspect the file system has become corrupted.
i brought an HP Pavilion G6 and it comes with an GUID partition table (GPT), EFI and Secure Boot. However i need an MBR partition table, so i tried disk managerment but the option "convert to mbr" is greyed out and when i run the "diskpart - list disk - select disk 0 - convert mbr" i get an error "cannot convert a partition which has a pagefile on it" (disabling the pagefile didn t worked).
I guess my only other option is to format it, but the notepad comes with an lincesed Windows 8 which i dont wont to loose. So what are my options? I dont ave the CDs, as it s HP packet.
Update:I ve successfully formatted my Notebook. All i had to do is enter legacy mode, disable secure boot and boot from the Windows 7 DVD. So if you ave no intention using Win 8 it won t be a problem to "downgrade" in an UEFI/EFI System.
I am following instructions to install ubuntu along side windows 8.1 the instructions say that you should only have upto 4 max partitions how can i delete these partitions down to as when you right click there is no way to delete.
Also which ones are safe to delete ...
I am using a acer laptop 2.4ghz 6gig ram 64bit ...
I wanted to set up dual boot for Windows 8. I created a partition with enough space to load windows 8 from an ISO file.
However, after creating the bew volume, windows 8 displays a message that the partition is dynamically loaded. I have deleted the partition and re-created it with the same result.
I don't remember seeing an option for dynamic creation.
In a previous attempt< I have a partition(Q), which cannot be deleted, don't know if this is a problem.
I'm going to upgrade my whole system at home I'm going to install Windows 8 Pro.
I've got two SATA HDD, sadly I have not SDD , the first one contains two partitions: the first one with the OS and the second one with all the programs/games/utils I've installed in time. The second hard disk contains only datas like movies, pictures, music etc etc.
Just to be more clear, at the moment with Seven I've got C: with the operative system and D: with all software I installed in time with the two folder "Program Files" and "Program Files (x86).
As a fresh Windows 8 installation, need to maintain the double partition of the primary hdd or is it completely useless?
I recently partitioned my Asus ROG G750JW into 2 main parts: One 300GB for a mackintosh, and one 6** (remaining space) for windows 8. That worked fine, until I tried to format what I thought was random partition with a size of 128MBs. I believe this to be the EFI partition, and you know what that does. I cannot boot to windows 8 or mac, and windows boot manager no longer shows up in BIOS. I have a windows 8 reinstall disk and the hackintosh install disk. When trying to refresh from the windows reinstall disk, I get an error saying that the disk is locked. What I need to know is if there is any way to restore this without erasing my hard drive. I do not have access to a windows computer (I can if I have to, but it wouldn't be ideal), but do have access to a mac. I don't have restore points, even if I did they are on the now one-huge partition, which by the way is listed as MBR format.
All of these partition, except for the NTFS partition, are listed as 100% Free. The NTFS partition is listed as 88% Free.
Are these partition available for use, or are they being used for something(?).
I am working on the boot situation, trying to find out how to input from the cd/dvd writer, but have not over come the "Secure Boot" thing yet. That will be next on my agenda.
I am attaching a copy of the data partition scheme ....
I'm trying to access the EFI partition and view certain files.
I have an EFI installed Windows 8 64 bit system on a MacBook Pro retina. (ie not BootCamp)
I have mounted the EFI partition in Command Prompt and it appears in Windows Explorer, however it refuses me access to it. Access denied.
How can I get access to its contents please?
My primary reason to access it is to view and copy my current BCD file. I suppose a method to copy that file might be a good enough work around, at a pinch.
