I wanted to set up dual boot for Windows 8. I created a partition with enough space to load windows 8 from an ISO file.
However, after creating the bew volume, windows 8 displays a message that the partition is dynamically loaded. I have deleted the partition and re-created it with the same result.
I don't remember seeing an option for dynamic creation.
In a previous attempt< I have a partition(Q), which cannot be deleted, don't know if this is a problem.
I want to install Windows 8 on my desktop pc, but dont want to loose win 7 in case i don't like it and want to go back. can I install it on a partition like you could with the consumer preview and if so how.
I would like to know how to install Windows 8 from a hard drive partition, so that is much faster than installing from a USB ... I've seen guides on how to do, how bad MBR, and I want to know how install W8 from a partition GPT / UEFI.
I have acer windows 8 laptop, I tried to install windows 8 Pro on OEM windows 8 partition after I formatted the partition and I ran windows 8 Pro installation media but at the partition selection and after I selected the ntfs partition I got error that "windows cannot be installed of GPT partition"...... is it possible that the OEM windows 8 was installed in a GPT partition?
1- How I can install windows 8 in GPT partition disk format? 2- How I can bypass this issue and install windows 8 Pro!
I want install another copy of windows 8 on another partition. This is useful in installing different group of programs so I boot the suitable one related to specific problems. Moreover you can delete a problem file from the other partition.
I partitioned a 1 Tb drive with windows 8 on first partition. Trying to install windows 7 on 2nd partition. Will boot from DVD & load files but when windows tries to open it stops & must restart computer to get out of freeze. Computer is Gateway DX4860-UR28.
I have made my Windows 8.1 DVD, but I haven't committed to installing it yet.
I'd like to just install it on a separate partition on my second hard drive.
Normally I wouldn't hesitate to just go ahead and install it, but I'm not sure if the new Uefi bios will just except it and automatically set up the dual boot menus etc, the way that it did in the past.
Are there extra steps that I need to take before going ahead with the install.
I definitely don't want to replace my current Windows 8 install until the final version comes online at that time I will probably do a complete new install of all my software.
I built up a new PC featuring a brand new SSD (i.e fully unallocated). Then, I made a clean install of Windows 8.1 pro (64bits) using an ISO DVD. Using Windows disk management tool after the install, I can see that only two partitions have been created: one System partition in NTFS (350MB) and the remaining of the SSD is the C: partition while I was expecting a third one : a recovery partition. Of course, I do not remember a prompt during the install to ask whether I want a recovery parttion or not.
Is it normal ? Is a recovery partition useful knowing I have the install DVD ? If the recovery partition has some advantages, is there a way to create it after the install is completed ?
I swapped the HDD with a new blank SSD in T530 and booted it with the recovery USB of windows 8. System boots from the USB and gives refresh, reset, and other options. However, when I select reset ( to fresh isntall the OS on the SSD), it fails saying a required partition is missing. What! I'm using a blank SSD, shouldn't the installer present me with options to format and use the drive rather than erring out?
Is there any better way of installing the windows 8 os on a new blank SSD using the recovery USB?
I do have gParted live USB. If nothing works, I will partition the SSD using gParted and try the Windows 8 recovery USB again.
I previously had Windows 8 installed on my desktop - I've just booted to Windows 8.1 Pro Setup so I can install it on my desktop - I've formatted my hard drive from within the setup but when I try to install Windows 8.1 Pro on the partition, I get the following error message:-
'Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI Systems, Windows can only be installed to GPT Disks'
What can I do now as I don't have a version of windows installed anymore...
I tried to install 32 bit Windows 8 in my friends laptop through bootable usb. It has win7 preloaded. I tried for the dual boot. But when I select the partition drive it said that windows cannot be install in that drive because the selected drive is GPT partition style. How to install Windows 8 os in that GPT partition style hard drive.
I have a new HP envy t215 desktop with intel I7 Processor on a Megatrends MB with an EFI partition. The computer came with windows 7 pro but I want to temporally installWindows 8.
I want to remove the hard drive with Windows 7 Pro and insert a new 1TB Sata drive for a fresh install of windows 8. I have an almost new 1TB Sata WD hard drive formatted GPT/NTFS.I have completely wiped the hard drive. I will have to have the EFI partition on the windows hard drive.
The real question is will the windows 8 OEM software create the correct partitions when the system is installed.I know I need the EFI partition and the operating system partition at a minimum.
I already have windows 8.1 installed in c: partition
I have created new partition ''New Volume :" to install windows server 2008 on it ,but when I try to boot from the CD to install it this message appear
"Windows cannot be installed to this Hard disk space . The partition contain one or more volumes that are not supported for installation" ...
How to make a clean install on my Samsung Series 5 550P5C, but I hear from here to there that when I do it I will delete my Recovery Partition (which I would like to have on the disc in some radical case). However I saw a thread when someone performed a clean install and didn't lost the recovery partition. Additionally I think it should not be able to remove it installing Windows on C partition, as this is another partition on the disc - than Recovery part.
I would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
I want to create a second primary partition on my first harddisk(disk 0 look at picture)
from the free space there in the extended partition(view screenshot). Now my problem is that whenever I want to create a new partition by right clicking and selecting "New Simple Volume" and selecting the formatting etc, I get another logical drive in the extended partition(look at picture below).
Is is not what I want. I want to move that free space out from the extended partition and add the unallocated 9 MB to it and then create a second primary partition on disk 0.
Note: If its possible I want to do this without using any third party software, IF POSSIBLE.
This is my basic spread prime contains a win 7 installation(active) halo contains a win 8 installation(boot) and is a logical partition What I need to do is: format prime and combine it with halo , this will be my boot and active keep logic and halo as it is an my logical drives I cannot lose data in halo or logic. how do I go about doing this ..
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I am following instructions to install ubuntu along side windows 8.1 the instructions say that you should only have upto 4 max partitions how can i delete these partitions down to as when you right click there is no way to delete.
Also which ones are safe to delete ...
I am using a acer laptop 2.4ghz 6gig ram 64bit ...
All of these partition, except for the NTFS partition, are listed as 100% Free. The NTFS partition is listed as 88% Free.
Are these partition available for use, or are they being used for something(?).
I am working on the boot situation, trying to find out how to input from the cd/dvd writer, but have not over come the "Secure Boot" thing yet. That will be next on my agenda.
I am attaching a copy of the data partition scheme ....
I am new to Windows 8, and first time with a laptop. I have 1tb hard drive (minus a few gb) in c drive. d drive is being used as recovery
This is how it was setup. What I would like to do is to partition the amount of space i have from c drive into another drive.
Can manage to partition some hard drive space over to another driver letter, if i do a fresh install of windows, will this new drive be formatted too?
(Just asking this because when I owned a desktop computer, I had two drives. A c-drive and a d-drive. When I re-installed windows 7 on the desktop, all my files were still available on the d-drive, hence asking the above last question).
I have an Asus ux32a zenbook and basically, I was wanting to reinstall my windows 8 back to the factory settings. My recovery image I saved is deleted and I may have started formatting my hard drive but am not sure. I try the f9 at startup to access the asus recovery but nothing happens.
I have a copy of Windows 7 I was going to just install over it but when I go to the advanced set up where it asks where I want to install windows I get a long list of disk partitions that have OS, Data, Restore ect. already on it looks like , which makes me think I can still access windows 8 somewhere on my computer.
The problem is, when I boot my computer without an installation usb, it directly takes me to the bios and nothing else. My question is, is it possible to see if I can access my recovery partition, if there is one, just through bios, since that is my only option when I turn the computer on?
He has a DELL XPS machine, an i7 newer model running 8.1, he's got a main internal HD as C: and a permanently added USB drive with 3 partitions ad D: E: and F: but on reboot the F: partition suddenly goes up a letter to G:, the other two stay the same.
Apparently its been fine until recently when this started happening, I made sure the used Disk Management to change the letter back but on reboot its back to G:
He has no other devices attached and any other USB drives either have a selected letter near the end of the alphabet or are not assigned a set letter but none are attached when the machine boots. It sounds like the F: is being reserved by something, possibly registry wise but I don't have the machine in front of me to check and I would rather its me using regedit and he's got slippery fingers due to arthritis and is prone to over clicking and wrong key presses.
where to check or what to check, I've done as much as I can via Skype but at a loss as to why its only doing it to one partition and always the same one, also did a dischk and the partiton is ok.
