How To Access EFI Partition And Its Contents
Oct 9, 2013
I'm trying to access the EFI partition and view certain files.
I have an EFI installed Windows 8 64 bit system on a MacBook Pro retina. (ie not BootCamp)
I have mounted the EFI partition in Command Prompt and it appears in Windows Explorer, however it refuses me access to it. Access denied.
How can I get access to its contents please?
My primary reason to access it is to view and copy my current BCD file. I suppose a method to copy that file might be a good enough work around, at a pinch.
View 2 Replies
ADVERTISEMENT
Sep 22, 2014
My windows 8 partition is inaccessible. Win 8 won't boot, even after attempted repair and running chkdsk.
This all happened after an automatic update.
I booted to another drive. Windows explorer shows the bad partition letter but no size or contents. Other partitions on the same drive are ok.
I also can see the bad drive contents from a cmd prompt.
View 4 Replies
View Related
Jan 21, 2014
I can't excess one of my disk partition anymore .. it was perfectly alright back some time don't know what caused the error.. added a screenshot
Local disk F is having the problem...
View 3 Replies
View Related
Jul 7, 2014
I have a Sager NP9377 with Windows 8.1 installed. I got hit by bad viruses and need to recover. How do I access and restore from the Recovery Partition?
View 1 Replies
View Related
Mar 20, 2014
I need to gain access to registry stored on dead Windows 8.1 partition (as mounted system volume backup). That means it's not directly bootable, I can only access it's file structure from outside. Now I'm curious if there's a software or procedure that can locate and load registry from it and display it in some exportable format like REGEDIT4.
View 2 Replies
View Related
Dec 12, 2013
I cannot edit a folder when I've used "Take Ownership" and I've made sure in the Security tab that I have full control, I still get "You need permission to preform this action" when trying to move stuff in the folder. What could be wrong?
View 7 Replies
View Related
Nov 24, 2013
So i running 1080 off i7 4770 internal graphics and there content cut off from my screen. It looks like someone zoomed in my screen and know i can't see a lot of my stuff. I can just barley see my toolbar. Half of my icons are to far to the left see them. If i snap something to the top of my screen i can see all my tabs. This just happened because for a little while because i switched from a graphics to my internal graphics. How do you fix something like this. For a picture i look like this
[URL] .....
display panel does't seem to fix it and the controllers on my monitors don't work.
View 1 Replies
View Related
Jun 14, 2014
Would like to view contents in Recycle Bin before final deletion?
View 2 Replies
View Related
Oct 28, 2013
I have a problem with the Visual Effects in Windows 8. When i check "Show windows contents while dragging" and then press apply changes saved
Then after restarting computer settings returns back and the box is unchecked.
I don't know whether this is caused by software conflicts or something else .
View 9 Replies
View Related
Jul 21, 2013
I have a vista (sp2) 32bit PC & need to transfer the contents to a new Win 8 64 bit laptop.
No cd/dvd drive on the pc (or 1 that works).
View 9 Replies
View Related
Aug 18, 2014
Using Livemail in Windows 8.1 for no apparent reason the content of all messages in one or more storage folders will disappear. The message header is OK, but the contents of all messages in that particular folder are identical. It seems to occur only when I drag a new message from the inbox or sent box into the storage folder. And not every time.
I have tried restores the message contents. Clearly the WLM storage file is messed up - is there any way to restore or recover it?
View 2 Replies
View Related
Aug 25, 2014
I found that my two Windows 8.1 laptops will not copy the entire contents of any folder to my Iomega network drive. Only the folder alone is copied and none of the sub-folders or individual files. I can copy individual files separately, but not the whole folder sub-folder, and files together. I have no problem doing this with my Windows 7 desktop PCs. My network drive is connected directly to my Apple Airport Base Station router.
View 4 Replies
View Related
Jul 17, 2014
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
View 9 Replies
View Related
Jan 30, 2013
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
View 9 Replies
View Related
Aug 10, 2014
I would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
View 9 Replies
View Related
Dec 12, 2013
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
View 3 Replies
View Related
Jul 22, 2013
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
View 1 Replies
View Related
Oct 14, 2013
I want to create a second primary partition on my first harddisk(disk 0 look at picture)
from the free space there in the extended partition(view screenshot). Now my problem is that whenever I want to create a new partition by right clicking and selecting "New Simple Volume" and selecting the formatting etc, I get another logical drive in the extended partition(look at picture below).
Is is not what I want. I want to move that free space out from the extended partition and add the unallocated 9 MB to it and then create a second primary partition on disk 0.
Note: If its possible I want to do this without using any third party software, IF POSSIBLE.
View 4 Replies
View Related
Feb 27, 2013
This is my basic spread prime contains a win 7 installation(active) halo contains a win 8 installation(boot) and is a logical partition What I need to do is: format prime and combine it with halo , this will be my boot and active keep logic and halo as it is an my logical drives I cannot lose data in halo or logic. how do I go about doing this ..
View 2 Replies
View Related
May 27, 2014
Windows network and sharing center says that no Internet access but Internet is working (sort of conditionally ) This is a desktop computer with LAN Connection . only one adapter is shown in network devices. Currently we are in domain environment and behind Microsoft tmg.
When proxy settings are set to auto detect then browsing is not working on internet explorer 10 but it's working flawlessly in Chrome. however manually entering the proxy settings browsing is Internet Explorer works.
I tried browsing by ip address in internet Explorer but no luck. It's only on this one pc.
Windows is updated regularly. Scep 2012 is installed with latest definition and found no issue.
I have tried twice to Reset the windsock and tcp ip stack. Still same result. Uninstalled network card drivers still no luck.
Ip is assigned by DHCP. I manually entered ip settings no luck.
Scan with malware bytes anti malware found three malwares and quarantined but still no luck.
Network cable is tested ok.
Reset internet explorer settings and restart pc but still no luck.
Removed Internet Explorer and restart computer and then installed again and restart and still no luck.
Also tried disabling ipv6 no luck.
Internet Explorer 10 is needed as we have some custom applications that won't work with ie 11.
However when I login with another account (another domain user account) all is ok i.e. browsing in IE with auto detect proxy settings is working and also the network icon is not showing no Internet access.
View 7 Replies
View Related
Oct 31, 2013
I have both windows 7 and windows 8 and I would like to have each operating system on a different partition (or even on a separate hard drive if it isn't possible). My windows 7 is 32 bit and I have both 32 and 64 bit of win8. The Windows 8 is a OEM system builder version. Is it possible to have both a 32 bit and a 64 bit on the same drive (partitioned of course) If not, would installing it on a separate hard drive work? My final question is: if I can get win 8 and Win 7 on my computer, could I still use some of the Win 7 software with windows 8 or would I have to download another version? I am using a Fujitsu lifebook T730, corsair ssd as primary drive, and a HHD in my disk drive bay.
View 4 Replies
View Related
Jun 27, 2013
I am trying to partition 25 Gigabytes of my hard drive to dual-boot Ubuntu, but when I go to "Shrink Volume" and try to shrink my C: drive, I can only shrink around half a gigabyte. I defragged it and it still won't shrink more than that. It is a 440GB drive and I still have 298GB free.
View 2 Replies
View Related
Feb 22, 2013
I just looked at the disk manager, and I see this:
I am not sure what those 19 gb are.. and is there a way to get them back ? If I right click on it only gives me an option to delete..
View 9 Replies
View Related
Dec 27, 2013
I'm having a problem connecting my laptop to an external monitor. I've encountered this problem a few times now. My external monitor will just stop working one day, and the only way I've found to fix it is to delete the keys located in the EFI partition.
After the keys are deleted I can reset EFI in the BIOS and the monitor will then be detected by Windows. It's getting to be really annoying having to reset EFI every couple days. So, I decided to see if I could unlock the EFI partition and try to remedy this problem.
So far I managed to set the partition as a basic data partition using SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Next, I assigned it a drive letter. But if I try to explore the contents I get an error saying "I don't have permission".
How to assign the correct permissions??
View 5 Replies
View Related
Apr 7, 2013
I recently shrank my had drive and made a data partition. I then did a factory restore and installed windows on the c partition. Everything seemed to go well. I now can not see the D partition. It only shows up in Computer Management. It will not allow me to do anything with it. It is calling it OEM partition. What do I need to do to recover this?
View 8 Replies
View Related
Sep 22, 2012
I recently made a partition for the (forget the exact name) but the I guess demo version of Windows 8. I will just upgrade to Windows 8 when it comes out. Is there a way to get rid of that partition, and just have my hard drive back to the way it was?
View 7 Replies
View Related
Jun 1, 2014
I have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
View 3 Replies
View Related
Jan 25, 2014
Any decent free/low-cost software package for recovering data from an NTFS partition? My Windows 8 has gone down and I suspect the file system has become corrupted.
View 5 Replies
View Related
Jan 29, 2013
i brought an HP Pavilion G6 and it comes with an GUID partition table (GPT), EFI and Secure Boot. However i need an MBR partition table, so i tried disk managerment but the option "convert to mbr" is greyed out and when i run the "diskpart - list disk - select disk 0 - convert mbr" i get an error "cannot convert a partition which has a pagefile on it" (disabling the pagefile didn t worked).
I guess my only other option is to format it, but the notepad comes with an lincesed Windows 8 which i dont wont to loose. So what are my options? I dont ave the CDs, as it s HP packet.
Update:I ve successfully formatted my Notebook. All i had to do is enter legacy mode, disable secure boot and boot from the Windows 7 DVD. So if you ave no intention using Win 8 it won t be a problem to "downgrade" in an UEFI/EFI System.
View 9 Replies
View Related
Sep 15, 2014
i have Ultrabook Dell XPS 15 (Touch screen)
with 2 hard drivers (500GB SATA+ 32GB SSD )
now the question, when i re install windows 8.1
how i can partition the 32 SSD hard drive
should i install windows on it ? or just use it a a normal partition ?
View 9 Replies
View Related
Jan 23, 2014
A Dell technician replaced a new motherboard. Then, Windows 8 was restored using a provided Windows 8 recovery media DVD. Now, windows 8 runs super.
What I now found was that the original recovery partitions were disappeared. in the main hard drive.
I could not create a recovery drive (in flash drive) without recovery partitions in hard drive.
Is there a way to re-create the original recovery partitions ? If so, how?
View 9 Replies
View Related
