Disk Partition Error - No Access
Jan 21, 2014I can't excess one of my disk partition anymore .. it was perfectly alright back some time don't know what caused the error.. added a screenshot
Local disk F is having the problem...
I can't excess one of my disk partition anymore .. it was perfectly alright back some time don't know what caused the error.. added a screenshot
Local disk F is having the problem...
on my computer with windows 8 format as I am. Dvd format to format I've installed disk, but I erased or something during the installation, format the error output. The computer BEGAN to GIVE the following ERROR :
GIVEN WARNING
Error: no boot disk has been detected or the disk has failed.
</b>
<img class="decoded" alt="http://i.hizliresim.com/W2jNzN.jpg" src="http://i.hizliresim.com/W2jNzN.jpg" />
I'm running windows 8 on a partition so I use it mostly for gaming. I have 115 GB on the partition, and when I totaled all the files in my Bootcamp drive it comes to a total of about 80 GB, 50 from games, 20 from the OS. However, I'm constantly getting error messages saying that my disk is almost full and that 105 gigabytes have been used. I've tried CCleaner and disk cleanup but nothing big is found. So why would it be using space greater than what can be seen in the disk when using explorer and is there any way to fix this error (if it is one)?
View 5 Replies View RelatedI'm trying to access the EFI partition and view certain files.
I have an EFI installed Windows 8 64 bit system on a MacBook Pro retina. (ie not BootCamp)
I have mounted the EFI partition in Command Prompt and it appears in Windows Explorer, however it refuses me access to it. Access denied.
How can I get access to its contents please?
My primary reason to access it is to view and copy my current BCD file. I suppose a method to copy that file might be a good enough work around, at a pinch.
After installing Windows 8 my computer had four partitions; I thought they'd be fine but want to change it to have two big ones, one for Media and one for typical C: usage. I moved everything out of D: to delete the volume so I would have free space to the right of C:, which I've read is what you need to do in order to extend partitions using Disk Management. However, the option is still greyed-out when right-clicking C: as shown:
I did this because I've read mixed things about using 3rd-party software to extend partitions; some that don't truly extend it and just trick your computer into merging the two... I like doing things the purest way possible and would like to truly combine C: with the free space to the right of it. Why the option is not available?
I have a laptop with Windows 8 installed in a 256Gb SSD. There's a 32Gb recovery partition whose purpose is to recover the drive to factory install. Since I already imaged this recovery partition to an external drive I would like to delete it and merge it to the main C partition to increase capacity. I know I can do this easily with 3rd party solutions (Easus, etc), but I'd like to do it using the Windows 8 built in Disk Management. I tried but when I right click on the 32Gb recovery partition the only option that shows up is "Help", it does not show any other option that shows for the other partitions (Shrink, etc).
View 9 Replies View RelatedCan I delete / merge the Recovery Partition into the EFI System Partition?
View 2 Replies View RelatedI recover, my recover partition, to a usb 2.0 disc, i try to recover from there, but it only show me the blue screen options, to choose language and keyboard layout, then i choose again the same driver, and same thing again, i can't pass from here, i even try to boot from the usb disc, and same thing.
View 4 Replies View RelatedI am trying to do a clean install of windows 8 on my laptop (Elitebook 8770W) from a USB stick with original MS Windows OEM iso. Once I boot from usb stick, at the setup screen I enter the product key and then choose advanced to do a clean install. I then choose my hard disk partition to install windows but I get stuck here with this error:
"Windows cannot be installed to disk 0 partition 1"
I deleted the partition and choose to install on the unallocated space (150GIG) But still get the same error and when I click on the error this is what I get:
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's Bios"
In bios I have my disk set as Raid and I also have a m-sata Flash cache. If I change raid to AHCI I will be able then to install windows. But if I turn it back to raid after install I will no longer be able to boot I have to be in raid mode to use my m-sat as cache drive.
So here I am stuck not being able to install windows I even downloaded latest intel rapid storage technology drivers and put them on the usb stick with windows setup files. When i got the error I choose to load driver. But even after that I was getting same error and windows would not install on my HDD.
What's the right way to install in this condition (raid)?
I have a Sager NP9377 with Windows 8.1 installed. I got hit by bad viruses and need to recover. How do I access and restore from the Recovery Partition?
View 1 Replies View RelatedI need to gain access to registry stored on dead Windows 8.1 partition (as mounted system volume backup). That means it's not directly bootable, I can only access it's file structure from outside. Now I'm curious if there's a software or procedure that can locate and load registry from it and display it in some exportable format like REGEDIT4.
View 2 Replies View RelatedI'm trying to allow my win xp desktop pc to be able to access the hard disk on my win 8 laptop.
I put them in the same workgroup and then map the laptop's disk on the desktop pc. I can now see the laptop's disk in "network drives" in the xp but when I try to open it, I get an error message that I am not allowed to access it.
So, back at windows 8, I go to my disk Properties, Security tab and try to Add permissions for the winxp pc, which is what I think I'm supposed to do to solve my problem. However, at the "Select Users or Groups" window, I click on Locations and the only thing that appears is the Windows 8 laptop. Isn't the desktop pc supposed to be appearing over there as well? I can't add permissions for a pc that doesn't exist in Locations.
I did a Clean Install on a new SSD Drive. When I tried the Relocate User Profiles to another Partition, the System gave me a message that I would have to re-install, but the Windows 8 CD will not re-install. What can I do?
View 1 Replies View RelatedI've long been an XP user, just purchased a new desktop with 8.1 and a 2TB HDD this week.
I was partitioning some drives to organize things, and i am stuck.
On a 2TB drive, i have so far allocated 900GB over 4 drives for files, etc. [100,200,300,300]
I have 946.42GB left on my C, and i was hoping to get at least 2-3 more 200/300GB drives before leaving the remainder to C, but when i attempt to shrink my C drive, Disk Management tells me ive only got 20835MB/20GB available space to shrink. Wtf? I have literally added nothing to the computer except uTorrent, ive used Disk Optimizer to defrag the C drive 3 times, and still all of this space is unavailable? The OS has unmovable files scattered that loosely??
Either with my startup today, or sometime in the last day or two, all my drives/partitions in Windows Explorer (and XYplorer) have lost their labels and are now showing as "Local Disk." Looking in Windows 8 Computer Management and EaseUs Partition Manager, the labels are there, as shown in the screenshot. I ran all three main repair modules of Yamicsoft Windows 8 Manager and there have been a few reboots, but still the same.
View 8 Replies View RelatedI previously had Windows 8 installed on my desktop - I've just booted to Windows 8.1 Pro Setup so I can install it on my desktop - I've formatted my hard drive from within the setup but when I try to install Windows 8.1 Pro on the partition, I get the following error message:-
'Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI Systems, Windows can only be installed to GPT Disks'
What can I do now as I don't have a version of windows installed anymore...
I was having a problem since my computer shows "windows cannot delete the active system partition on this disk". How to delete the partition on which i have windows 7 installed.
Here is the screen shot ...
I have bought a new PC/Server to be used as a media server, I have 2 x 2TB disks installed which I believe I have mirrored.
See below screenshot.
From the reading and research I have done I don't believe if one disk was to fail the other one would work, I think I may need to mirror the EFI system Partition and Recovery Partition of which I'm not too sure how to do this?
I have this problem since Windows 7, i don't remember this happens on Windows XP.
I have 2 computers with Windows 8.1 installed: desktop and laptop. I am trying to access local disk drives of "desktop" from "laptop".
For example, i type in Windows Explorer "desktopc$". "Windows Security" window pops up where i am typing credentials. If i specify "desktopadministrator" user and then provide correct password everything is fine, i can access disk C. But, if i type "desktopjohn" and provide correct password i am getting error "Access denied". "john" is my main account, it's in "Administrators" group of "DESKTOP" computer.
If i try to access the same resource over "cmd net use" i receive error "System error 5 has occurred. Access is denied."
Why "john" can't access "DESKTOP"'s disk C over LAN?
I tried to install 32 bit Windows 8 in my friends laptop through bootable usb. It has win7 preloaded. I tried for the dual boot. But when I select the partition drive it said that windows cannot be install in that drive because the selected drive is GPT partition style. How to install Windows 8 os in that GPT partition style hard drive.
Laptop has Hard disk-500 gb,64 bit win7.
1) When I create my partitions using the Windows 8.1 Setup Wizard, what cluster size does it put for my SSD?
2) How to check what cluster size I am currently on?
3) For SSDs, is it best to stick to the default 1024 cluster size or to manually create the partition using Disk Part and set it as 4096?
4) If your answer for 3 is to manually create them, what are the commands in Diskpart that I need to enter to have the 3 partitions ?
While I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.
I use O&O Disk Image 7.2 to make images of my Windows 8 drive. Occasionally I need to mount an image to access folders and files. One folder I can't access is my user folder. I get the message 'You don't currently have permission to access this folder.' I took ownership of the folder but that didn't work. I get a similar result for the folder "C:WindowsCSC" if you want to see how my user folder behaves.
How can I access my user folder on my mounted image?
IE won't work, Windows Store won't access, Can't "Refresh" without OS Disk, Won't access extra hard drive or format. Using Windows 8 Pro, don't have original disk. Can I purchase another Windows 8 Upgrade disk and install it to resolve this problem?
View 3 Replies View RelatedI'm trying to upgrade from Windows 7 to Windows 8 (and then 8.1) on a laptop with a 240 GB SSD. When I run setup, it loads, but then says Windows can't be installed because there isn't enough free space on the system reserved partition. My reserved partition is only 32 MB (I believe it was shrunk from 100 MB when I swapped the SSD in).
Is there any way I can resize the reserved partition and install Windows 8, or will I need to totally reformat the drive and repartition? Don't want to reinstall all my software .....
Trying to delete a folder I get "Folder Access Denied" -- need to provide administrator permission to delete this folder. I am the only account on this PC an am Administrator. I click continue and get the same message with "Try Again".
View 3 Replies View RelatedIs it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I've run disk cleaner and System error memory dumps took almost 15GB WTF is that?
I don't get any BSOD nor crashes nor any stability issues, except some update which won't let me install.
Error message: An error occured while the wizard was attempting to set the password for this user account.
Why did my error occur and how do i prevent it?
I got Huawei E220 3G USB dongle. I couldn't use it to connect to the internet on Windows 8 Pro x64.
Its giving Error 711. Saying Remote Access Connection Manager couldn't start. I went to services and tried to manually start it. But Its giving Error 20 as below.
I got Huawei E220 3G USB dongle. I couldn't use it to connect to the internet on Windows 8 Pro x64.
Its giving Error 711. Saying Remote Access Connection Manager couldn't start. I went to services and tried to manually start it. But Its giving Error 20 as below.