I recover, my recover partition, to a usb 2.0 disc, i try to recover from there, but it only show me the blue screen options, to choose language and keyboard layout, then i choose again the same driver, and same thing again, i can't pass from here, i even try to boot from the usb disc, and same thing.
View 4 Replies
I upgraded my new refurbished Dell 15 7000 from Windows 8 to Windows 8.1. Now, my hidden recovery drives are showing on "My Computer". On Windows 8, they were hidden so the user, or softwares, can't access the partitioned recovery drives.
After upgrading to windows 8.1, they are all visible on "My Computer" and files are be written on them. How can I hide these drives? I am afraid of doing Windows Update or installing Office 365 since they extract the files on a different drive and move them back to C drive.
Dell 15 7000 specs
Windows 8.1 upgraded from Windows 8
Intel i7 4500u
Nvidia 750m GDDR5 2GB
8GB memory
1TB Western Digital HDD
4 USB 3.0 ports
Can I delete / merge the Recovery Partition into the EFI System Partition?
View 2 Replies View RelatedDual booting Win 7 and Win 8. Win 7 is C: Primary installed first, Win 8 is installed to a primary partition (25GB). I get the blue recovery screen after starting Win 8 from bootloader menu. Win 7 starts fine. I have installed Win 8 on another computer using the same flash so I know the flash is good. First I defraged and cleaned out C: then created the partition. I have installed it on the computer before (preview edition) then removed it(formated D: partition), this is the RTM 9200 build. Did I mention that on the other computer when installed it asked for Key which I temporarily skipped, on this computer however when installed it did not ask for the key. Before the install I ran bootrec /fixmbr, /fixboot and also /rebuildbcd from Win 7 install disk.
I don't think it's a problem with the Win 7 boot loader. My guess is some registry value or other setting or file in Win 7 is preventing normal startup of Win 8. I do believe it's not hardware related. Any thoughts on what could cause this? Could it be the Win 8 bootloader now causing problems and if so how would I fix this issue? Do I need to fix bootloader in Win 8 and should I run the bootrec cmd's from the Win 8 flash this time? Not sure which has taking over now! I have searched in these forums and online for a couple of day's to no avail though references have been made that the Win 8 bootloader has now taken over, if so were does the now functioning bootloader reside - C: or D: (partition) and which one is it Win 7 or Win 8 loader?
I have bought a new PC/Server to be used as a media server, I have 2 x 2TB disks installed which I believe I have mirrored.
See below screenshot.
From the reading and research I have done I don't believe if one disk was to fail the other one would work, I think I may need to mirror the EFI system Partition and Recovery Partition of which I'm not too sure how to do this?
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I pay a used laptop Sony Vaio SVF 143100c from china , they install windows 8 Enterbrise and no other software or drivers
when I check I found a recovery volume on the hard disk I assign this volume and copy all the recovery content to external Hard disk, size is 18 GB
and the product key is valid for Win 8 RTM CoreCountrySpecific OEMM,
I don't have a Recovery Media disk or usb to return to Factory condition, how to create a recovery disk to access tis image and re install tis laptop to Factory condition
If you have a recovery drive - that includes the recovery partition - made on one computer, but have a toshiba laptop with a bad drive (but the recovery partition is ok), can you replace/copy the partition on the recovery drive with the recovery partition from the bad laptop HD?
My friend's laptop would not boot, and would not factory recover, reset, or refresh. I tried to clone the hard drive before I started messing with the disc. It would not clone, but I was able to copy the recovery partition to a USB drive.
He never make recovery discs, so could not re-install, but I can borrow the recovery drive that my aunt made for her laptop.
I just bought a harddisk for my ,8 years old dell inspiron 6000 laptop. It a wd Scorpio blue 250 Gb drive but in my bios it is just showing 137gb. So I thought low level format will solve this. Although in Windows setup it shows 250 Gb.
View 5 Replies View RelatedMy hard disk crashed. I have a recovery cd created on the time of purchase. I bought a new hard disk for this purpose. Now when I am trying to recover from the same cd it is getting stuck at 40 % showing error. I searched for this error and got something as such recovery disk can work on OEM hd. As my old hd has crashed how can I recover over there. Is there any system that dell provide me with necessary operating system so that atleast I can use my system.
View 7 Replies View RelatedJust installed 8.1 on one of my machines. The 100 mb "system reserved" boot partition is showing up as drive E in the drives. It does not show on my other Win 8 machine. Why would this be? Is there some way to hide it?
View 9 Replies View RelatedJust had this new laptop running windows 8 and its an Acer.When I select the photos tile on the screen it goes to another screen which is black with a blue square icon and underneath it tells me that there are no files or folders in this view.There are photos in my picture folder as I just put then in.But if I go to the other method and select the My picture folder the photos are there.
View 7 Replies View RelatedI've having an issue that I think some ppl had, windows 8 crashing going to blue screen of death or blank black screen and then it restarts by itself, also I have noticed that it says repairing disk in D:/
I have one SSD 120gb in the C:/ which it host the operating system and some minnor programs, in a HDD which is my D:/ drive there I have my games.
ASRock 990FX Extreme 9
AMD FX 8350
Kingston Hyper X 120GB SSD
WD black 500GB HDGB HDD
Corsair Vengeance 8gb Ram 2133Hz
Windows 8
I get a blue screen error of "driverirql_not_less_equal" when my laptop monitor dims.
Specs:
OS: Windows 8 Professional (64 bit)
Intel i7 2640M
8 Gb Ram
1T HD
The attached screen capture is the location of my error.
i have a dell 5520 inspiron laptop which i bought 2 months ago . Yeasterday while starting the laptop , just after the lock screen , i pressed a key on the keyboard, but the login page was not visible ,i could not access my account .
View 2 Replies View RelatedMy K partition is of 24.3GB and says that only 3.80GB is free.
However in reality, the data inside is worth only 14.3GB which means 10GB should be free, not 3.80GB.
What could be the problem? I have attached the screenshot too.
Even though there are no hidden files in this partition, I enabled 'View Hidden Items'. And the size is indeed 14.3GB only. So I wonder where my remaining 6.20GB is going!
A Dell technician replaced a new motherboard. Then, Windows 8 was restored using a provided Windows 8 recovery media DVD. Now, windows 8 runs super.
What I now found was that the original recovery partitions were disappeared. in the main hard drive.
I could not create a recovery drive (in flash drive) without recovery partitions in hard drive.
Is there a way to re-create the original recovery partitions ? If so, how?
I recently upgraded my HP Pavilion m6-1000 to windows 8 from windows 7 using windowsupgradeoffer. Since then, I have only experienced bugs and problems with my computer so I want to downgrade to windows 7. I didn't get a recovery disc when I bought the computer, but I have a recovery partition on the computer, called "Recovery (D:)". I also have the product key for windows 7
I have read that it is possible to downgrade using this partition
I'm trying to run the Dell Backup and Recovery application on a new windows 8 xps 8500. Unfortunately all the tile labels are only showing IDS tags eg: IDS_DS_022,IDS_DS_003 and when I click on a tile the subsequent window is also full of different IDS tags. I've tried reinstalling the app but no change.
View 8 Replies View Relatedmy WESTERN DIGITAL hard disk was running smoothly and i can access all datas.....but today 1 disconnected it and there after it is not showing on "my computer"...
bt d indicator light is on and it is rotatng insise......but cant access it ....
I've just been migrating data to my new Storage Space on Windows 8. I had to do this in stages because I had a limited number of disks available to me. I had 2x 2TB disks in a nas box, and wanted to move them to a new server, and also added 2 more 2TB disks. Due to the nas being quite full, I started with a 4-disk pool consisting of 2x 2TB and 2x 500GB disks, and made a parity space.
My process was as follows:
Create parity space with the 2x 2TB and 2x 500GB disks
Copy all data from one of the disks in the nas to the space.
Remove 1x 500GB disk
Allow the space to repair
Add 1x 2TB disk from the nas into the pool
Copy the contents of the other nas disk to the space
Remove the 500GB and add the 2TB
Allow space to repair
The space is thinly provisioned at 4.85 TB which is what the GUI defaults to when I create a new parity space using all 4 disks. (I don't actually create the additional storage space). This is also what I calculated it to be (1.81*4*2/3).
Now the end result is very uneven disk usage and a low capacity warning, despite having what I think is about 57% total utilisation!
Here is a link to a screenshot of the space's setup:
[URL]
1) why it thinks there is low capacity?
2) How can I rebalance/redistribute the data evenly over the 4 disks?
I have an Asus ux32a zenbook and basically, I was wanting to reinstall my windows 8 back to the factory settings. My recovery image I saved is deleted and I may have started formatting my hard drive but am not sure. I try the f9 at startup to access the asus recovery but nothing happens.
I have a copy of Windows 7 I was going to just install over it but when I go to the advanced set up where it asks where I want to install windows I get a long list of disk partitions that have OS, Data, Restore ect. already on it looks like , which makes me think I can still access windows 8 somewhere on my computer.
The problem is, when I boot my computer without an installation usb, it directly takes me to the bios and nothing else. My question is, is it possible to see if I can access my recovery partition, if there is one, just through bios, since that is my only option when I turn the computer on?
I recently purchased a new Dell XPS laptop with SSD. The first thing I did after receiving it was to split the C drive into two using Easeus Partition Manager. Probably due to this, neither Windows nor the Dell Backup & Recovery software detect the recovery partition any more.
When I launch Windows built in recovery creator, it's 'Copy the recovery partition from the PC to the recovery drive' option is grayed out. If I click next, it would say 'We can't create a recovery drive on this PC. Some required files are missing'.
Dell Backup and Recovery says 'Corrupted Environment. Dell Backup and Recovery has not been able to detect the Recovery Partition on this computer. It may be missing or corrupted." (see screenshots below).One thing I am 100% sure is that the recovery partition is present and is intact. I was able to create a bootable USB using Dell Backup and Recovery (this is different from a full recovery media in the sense that the laptop will boot from USB, and then recover from the recovery partition). Using this USB, I was able to restore the OS properly. Unfortunately, even after this factory restore, Windows doesn't detect the recovery partition.
1. Output of diskpart
Here, partition 4 and partition 9 both have WinRE.wim. Partition 4 also has Reagent.xml. Both have the GUID same, but offset is different.
2. Output of various commands
Code: reagentc /disable
successful
Code: reagentc /info & reagentc /enable
REAGENTC.EXE: Operation failed: 3
REAGENTC.EXE: An error has occurred.
Code: recimg /showcurrent The recovery image configuration cannot be found. The system cannot access the configuration file. Error Code - 0x80070002
3. I also tried modifying the c:WindowsSystem32ReAgent.xml file without success. Based on the output of 'diskpart detail partition' shown below, I updated the file.
Attempt 1:
Attempt 2:
Code: Here, 'WinRe.wim' is located in 'Partition 9WindowsRecovery'. That's why I used 'WindowsRecovery' as the 'WinreLocation path'.
Neither of these worked.
I would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. How I can do this?
View 1 Replies View RelatedI have a 64GB flash drive I just bought to make a recovery for my laptop. I made the recovery partition just fine but its taking up 32gb when only using 21.5GB of space leaving over 10gb not usable. I am trying to shrink the partition to 24GB but it wont let me. Look at the attached screenshot.
Another question is my primary 1tb drive has a few extra 450MB partitions. What are they for?
I have got alienware m14xR2 with windows 8 x64. The task manager is showing 100% disk usage which is mainly used by "System" process.
View 1 Replies View RelatedI have (had) a dual boot with Windows 8.1 and win7 and I was using EasyBCD to edit the boot order. Now, when I try to reboot, I get a blue screen - saying 'RECOVERY - Your PC needs to be repaired'. I have a bootable USB recovery medium for win 8 but the problem is that I can't boot to it and fix the problem because I can't access the boot menu in my BIOS. The usual F12 option to select the boot device isn't showing up no matter what I do. I read that it has something to do with Windows 8's hybrid shutdown system. Is there any way to get out of this 'hybrid shutdown' so I can once again access the boot menu?
View 1 Replies View RelatedI have an HP Envy notebook. bought it 3 months ago. made recovery disk (actually it's on a flash drive). Had troubles with the notebook. HP support walked me through factory reset. Twice.
Never used the flash drive. used whatever was on the computer. Whether or not to keep the recovery stuff I put on the flash drive? Just wondering if its a waste of a perfectly good flash drive, seeing as I never used it when I reset.
I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself
Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
I was using win 8 which was original came with notebook , then I installed Windows 8.1 (not upgrade from Store , just from .iso packet ). Because of some errors I re-installed another Windows 8 . iso and now I can't download Recovery from SW Update .It says recovery partition doesn't exist.I was able to use that before. How can I re-create my recovery partition again?
View 7 Replies View RelatedI buy new asus X550CC-XO028H ultrabook with windows 8 preinstalled.I upgrade windows 8 to 8.1 over windows store.I get many erros in event viewer.So now need restore windows 8 from recovery partition.Install all programs and upgrade to 8.1.But i cannot to do this.Windows 8.1 cannot find system image.I try this this manual System Image Recovery - Restore Image on Computer in Windows 8 Asus manual also say recovery same [URL] .....
1. Restart your Notebook PC then press F9 during POST.
2. Wait for Windows to load the Choose an option screen then tap Troubleshoot.
3. Tap Advanced options. Notebook PC E-Manual
4. In the Advanced options screen, select System Image Recovery.
5. Choose an account you would like to recover using a system image file.
6. Type your account password then tap Continue.
7. Select Use the latest available system image (recommended), then tap Next. You can also choose Select a system image if your system image is in an external device or DVD.
8. Follow the succeeding steps to complete the system image recovery procedure.
How fix to work recovery partition.All original asus partitions are untouched. [URL] .....
