my WESTERN DIGITAL hard disk was running smoothly and i can access all datas.....but today 1 disconnected it and there after it is not showing on "my computer"...
bt d indicator light is on and it is rotatng insise......but cant access it ....
My Seagate Portable Drive seems to work as the green light comes on.
Screen shot of my Disk Management below. Am I missing something?
Other solutions have been to right click and assign a drive, but those listed below other that the C: don't allow.
Using OS Windows 8.1
I am currently running Windows 8 64 bit and when I go to "My Computer" it is only showing my C: drive. I know my other drives (internal, external and dvd) are working because I can enter the directory name (ie. H: or E:) into the address bar and the content appears. Is there any way to fix this problem so that they show up in "My Computer"?
View 9 Replies View Relatedi accidentally dropped my hard drive its a 1tb buffalo hd-pntu3,,now when i go to disk management in my computer its showing up as disk 1 unknown allocated,,and when i try to initialize disk its greyed out!,,i have a lot of files on this drive
View 6 Replies View RelatedI have a external had disk i want to share it on wifi. and want to access it from my laptop and my tv with usb port.
View 2 Replies View RelatedI was wondering what you'd recommend for the following:
I want a program that synchronizes my files with my external hard drive.
The client I use right now, Memeo Instant Backup, is decent, but has the following issues:
1. Takes a lot of resources to run
2. Is extremely slow
3. Doesn't mirror deleting files on my hard drive, keeps them on my external and causes it to get full
Is there a program I can use that just literally copies my user folder onto an external drive, and as I delete/move files on my hard drive, its mirrored on the external hard drive?
I just installed Win 8 last night and everything seemed fine before I turned off the computer. Now, I'm a student and I work a lot from my USB/HD. I have both my usb and HD connected to the computer but the computer doesn't read them now.
View 8 Replies View RelatedMy portable hard drive stops showing up all of a sudden. It is connected to a USB hub. When I go to 'Disk Management' in 'Computer Management', the hard drive shows up as Unknown - Not Initialised. Also this hard drive works while not using the USB hub, and the USB hub works as well with other devices.
View 9 Replies View RelatedIs there a way I can back up my files from my 2tb WD My Passport External Hard Drive? I have a lot of files on there which I want to back up and convert to NTFS.
View 5 Replies View RelatedHP Envy dv7, Windows 8
Seagate 2TB drive mounted in a Thermaltake, Max 5 enclosure. The drive does not show in Windows 8. Does show when running Disk Management (diskmgmt.msc) but shows as "Unallocated" without a drive letter. If run the Seagate drive tools, it shows up as unallocated, with drive letter "C". But there is obviously already a drive "C".
Disk Management does not present a means by which to assign a drive letter
I have a Simpletech Simpledrive External Hard drive. It works on my desktop running xp. When I connect to my Asus N56DP Laptop, I hear the binging and all. But I do not see it in my control panel. I can see it in the device manager. Not in Disc MAnagement. Is there something I can do to get it to install and be accessible? I have some race car pictures I would like to post to Facebook.
View 1 Replies View RelatedJust purchase this HornetTek X2-U3 JBOD USB 3.0 (HT-3210U3) - 3.5" DUAL BAY - JBOD - HDD ENCLOSURES
The only reason was because I had a spare 1TB drive and 500GB drive that I wanted to span into one volume, according the product spec it supports JBOD, which from my understanding should allow hard drive spanning, I understand that if one drive goes the data is lost, but that is not a concern of mine as I have numerous backups of my data. The problem is when I try to span 2 disk I get the following error "The operation is not supported by the object"
Here's a screenshot of the drives in question :
I have an external harddrive on a USB2 port that I have been using for ages without problems. Yesterday it just stopped being accessible for no apparent reason. The machine "sees" it (as the F drive) but can't access it. If I try to double click on the F drive the machine takes aaaaaages (green "busy bar" slowly tracking) and then I eventually get an error that says "F: is not accessible" - as per this image:
So I assumed the drive had died. But to test that, I plugged it into my g/f's old XP machine and it accessed the drive with no problems whatsoever!
The only other thing I could think to try was to look in disc management. But even though the is an F drive showing in explorer (as per the above image)... it doesn't even show up in disc management!
So, in exasperation, I did a "refresh" of my system. A bit of a drastic step, but I thought maybe it was time for a cleanup anyway. But, after the refresh was done... STILL the same problem! Exactly as per the above images, the machine "sees" the F drive but nothing is accessible.
I am connecting a 640GB Samsung G2 Portable External Hard Drive to my HP Pavilion 15 Laptop.
The external hard drive works on other desktop and laptop computers here at work, but when connected to the HP Pavilion (Windows 8.1 OS) it shows up as a Local Disk (H: but when trying to Open the drive it says:
"Location Not Available H: is not accessible The device is not ready."
What should I do?
I'm currently using a Dell Inspiron 3520 laptop with Windows 8 on it. I have an external hard drive from a Windows 7 desktop. It recognizes the external hdd right away and I can access it but I can't figure out how to boot Windows 7 as the primary. I've tried changing boot order in bios but I've had no luck as it still boots Windows 8 first. Is there a way to use the Windows 7 as the primary drive ? Even a way to temporarly turn off the Windows 8 hard drive will work. I just need to access the Windows 7 hard drive without having to navigate through program files to have to open something.
View 9 Replies View RelatedI have a USB hard drive which has two partitions:
1 x 100GB partition formatted as FAT32
1 x 900GB partition formatted as NTFS
(these sizes aren't perfectly correct, but it's a 1TB drive that's split in 1:9 proportions)
On my Windows 7 laptop, both partitions are visible in My Computer, and I can read/write with no problems. (On the same laptop, an Ubuntu install can also see and use them perfectly)
On my new Windows 8 laptop, the 100GB FAT32 patition appears under My Computer normally, but the 900GB NTFS partition does not. If I go to Computer -> Manage -> Disk Management, I can see the partition. It has no drive letter or file system listed, reports as "healthy, primary partition" and shows 100% free space. If I right click on the drive's entry in the list, my only options are "delete partition"; everything else is greyed out.
So, to summarise: One hard drive with two partitions. Both partitions work perfectly in Win 7 and Ubuntu. Win 8 can only see the FAT32 partition, and treats the NTFS partition as if it is junk.
way to persuade Windows 8 to mount this partition? I know that the drive and partition are fine, but for some reason Windows 8 isn't interested.
I have been experiencing problems trying to back up to external hard drive this week and keep getting an I/O Error with various error messages including 0x8007045D My Hard Drive is "G" and I can see it through my computer no problem and I also have my ITunes library on it and the ITunes music is working fine.
I am getting a message in Action Centre saying my Back Up did not complete successfully and then I have the option of Try to Run Again or change back up settings. If I select Try to Run again windows cannot find the disk or network location and if I change settings "G" does not appear. It seems Back Up has detected an error on my "G" which is preventing it from running the back up.
Also in Disk Management I am prompted to initialise a disc before logical disc manager can access it so I select MBR and I get I/O device error and disk 1/G is unknown/not initialised.I have tried powering the external drive off/on and also disconnecting it from the computer but no difference and at present I cannot save anything to the external hard drive. There is a previous back up already on the hard drive but this is not accessible at present.clearing this error so I can back up again without loosing what is stored on the hard drive in particular my ITunes library.
I recently purchased a WD 1TB external portable hard drive.When I first got it it was immediately recognised by my laptop (a 2 day old Asus Ultrabook S400C). This is my first time with Windows 8 so I am still learning to navigate it.
The first thing I did was transfer 650gb of movies and music across. I didn't format the hard drive first, maybe that was my first mistake. My files were still recognisable on my laptop and my WD TV Live media centre. The next day all of a sudden my media player wouldn't recognise it and when I plugged it back into my laptop it also cannot see it.
The device can be seen in device manager (when I click on properties it says it's working corectly), but not in the drives list in my computer. It is showing as "Disc 2" 'Not Iniitialised' and when I click on 'Initialise' and choose 'MBR' and hit OK it comes up with this error msg: 'The request could not be performed due to an I/O device error'.
I have a Toshiba 2TB External HD that came with NTI Backup software. Seemed to work fine until Win 8.1 installed and now I get the 'Corrupted' message, although the Drive shows up in This PC. Driver appears okay and as far as I can see the USB 3 hub the Drive is connected to is working. Have tried in USB 2 but with same result.
View 2 Replies View RelatedSince refreshing win 8 my DVD drive doesn't appear in 'computer' and doesn't boot from the win 8 disk. The green light on the drive flickers and you can hear the drive reading the disk.
View 3 Replies View RelatedI have a TDK 16GB usb pen drive that shows in Device Manager when inserted but not in Computer. It does sometimes appear but very rarely. I have updated all driver via Device manager an they are fine.
View 4 Replies View RelatedI have a Dell Inspiron 660 PC w/windows 8.1 no matter what I plug into the usb port I cannot find it on my computer. I hear the connect/disconnect sound, but can't find anything on the computer as to where it is at or how to open it. The device is a storage device with photos. It also does the same thing with my phone. I hear it, but nothing opens or comes up anywhere.
View 3 Replies View RelatedFirst of all.. let me say that this HDD does not have any kind physical damage. It has not been dropped.. nor it has a clicking or beeping sound.
The HDD is SeaGate FreeAgent Go 250 GB. I always watch movies in bulk. So I copy it to my HDD and plug it in the TV and use it. Today when I plugged it in to my PC for watching another set of movies, the copying was not going in a stable manner.. instead the graph showed mountain-like copying.. i.e. first it goes at much speed and then it loses and fall back to 1 or 2 mb/s.. So I thought that a defrag could set things right.
I defragged it and went for a coffee.. After coming back, the defrag was complete but i was unable to open the HDD.. I safely removed it but it said it was in use.. I shut down my PC and unplugged it.. turned on my PC but when I insert my HDD its unreadable.. it shows no percentage of free space.. only just Local Disk F.. ( earlier it used to show FreeAgent GO) I ran chkdsk F: /f /r.. but it showed some error.. I closed it. The log file is attached..
Now whenever I open my HDD, its stops responding.. I know it can be solved..
I was going to reinstalling windows on my computer and i thought put 200gb for windows 8 and and 1300gb can be for windows 7(for gaming), So i install windows 8 and shrink the hard drive size so windows 8 has 200gb. And use windows 7 for gaming but my pc is a bit s#*t and a dont do gaming any more. (only on the ps3).
So can i unshrink or something so i have 1.5tb together for windows 8?
[URL] .....
How can I get Windows 8 to recognize my secondary HD? It is a WD Green 500GB SATA drive. My bios reads it, but Windows 8 does not.
View 3 Replies View RelatedMy ssd broke so I went got a new one today I do a fresh install of win 8 but its showing up as removable disk .
My PC specs-sabertooth fx990 r2.0 mb. Windows 8 ...
Over the last couple days, I built a new PC and installed windows 8.1. Initially I had some issues installing windows, so I unplugged all my drives except the SSD and DVD. I installed windows to my SSD.
Everything works great!
Now I started adding my drives back in 1 at a time. When I plugged my 2nd SSD in, it showed up in BIOS, but not in Disk Management or Device Manager. So I booted back into the install CD, it showed up in the disk manager there. Since this was also a blank SSD, I partitioned and formated the drive from the install CD, then exited the installer and booted back to my windows drive.
I have 2 SSD drives working great!
Now to add my 2TB HDD... Same issue, it shows up in BIOS and the install disc, but not in Disk Management or Device Manager. This drive does not have a boot partition on it, however, it does have two existing data partitions. They were made from my previous windows 7 system and the option to delete these partitions is grayed out in the install disc menu. I also have some data that I would like to keep on it. I have a USB dock that I can use to read the contents of the disk just fine. Everything is there and in working order.
What is different about Windows 8.1 that is preventing my hard drives from showing up in windows proper? I am reading things about UEFI online, but nothing seems to fit my exact scenario. I will try and post some screen shots when I get back at it.
System:
Mobo- Asrock Fatal1ty Killer z87
CPU- i3 4330
GPU- Gigabyte 660 OC
SSDs - Kingston V300 120GB
Windows 8.1 64bit
There is 3 hdd's installed to my rig:
1 is 55gb kingston ssd where i run my windows
2 is 1tb hitachi where i keep my games and other junk
3 is seagates 250gb laptop hdd.
The main problem was that sometimes when opening or just clicking some folders freezes the file explorer and it crashes after it, so i tought to format the second hdd to make it work better now it seems work ok except for moving files from hdd to another.
When copying the copy speed just at random point drops to 0% and leaves the hdd 3 to hang 100% and the hdd 2 is dropping to 0%.
What i have tried:
I ran hdd regenerator and 18 bad sectors were fixed Also tried to change sata ports That's not much but can't figure anythin else for now and i am starting to suspect that my hdd is gone bad :/ also when downloading ~100mb file from internet it makes same thing but i don't know is it same problem...
I used four drives in my hard-disk. I needed to extend volume for my C drive. So using the Disk management utility I was trying to shrink the drive F (as it was very next to C, as in Disk management). But something happen accidental here. I found that two of my drives E & F went missing after the operation. Also my laptop suddenly restarted (after perform a checking task). I am not sure how this happened and looking for a way to recover the lost partitions as they are seen still exist, including the data.
I was only trying to shrink around 283 mb of volume from a drive with 138 gb, as an experiment basis, to see it work. On that process the drives were lost and those are not shown into my windows now. Using a software EaseUS Partition Master, I could still see the drives still exist as they contain the data as used spaces, and also show the unallocated space of 283 mb but I am not finding a way how could I recover my partition without affecting the data.
i installed win7 on my SSD (like 22gb drive) in my asus today. Now, under my computer, it shows nothing but the SSD. it doesn't show my 500gb hard drive.. Im pretty sure its because of something i didnt do in the setup. What should i do to get it to show up? i really really really don't wanna re install windows because i got all the drivers and installed programs..
View 9 Replies View RelatedMy hard disk crashed. I have a recovery cd created on the time of purchase. I bought a new hard disk for this purpose. Now when I am trying to recover from the same cd it is getting stuck at 40 % showing error. I searched for this error and got something as such recovery disk can work on OEM hd. As my old hd has crashed how can I recover over there. Is there any system that dell provide me with necessary operating system so that atleast I can use my system.
View 7 Replies View Related
