A Dell technician replaced a new motherboard. Then, Windows 8 was restored using a provided Windows 8 recovery media DVD. Now, windows 8 runs super.
What I now found was that the original recovery partitions were disappeared. in the main hard drive.
I could not create a recovery drive (in flash drive) without recovery partitions in hard drive.
Is there a way to re-create the original recovery partitions ? If so, how?
I would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. How I can do this?
View 1 Replies View RelatedI recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself
Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
I finally broke down and bought a modern laptop Asus A55A (K55A) and installed Ubuntu 12.04 in a dual boot situation. With the nefarious secureboot and other such nonsense Windows 8 install met with an untimely demise. However, I have the files left on the recovery partition (copied to my 16gb usb) and need to make an install disk. My only issue is that I can't find a way to do it in Ubuntu as all the tutorials I find assume that Windows is installed. Is there a way to make a bootable Windows 8 install usb or iso from the files on the recovery partition-without using Windows to make it? I would love to re-install Windows 8 and then setup a stale dual boot.
View 5 Replies View RelatedI am using windows 8.1. I have deleted my recovery partition by mistake. Is there any option to create again the same?
View 1 Replies View RelatedMy sony vaio laptop model is VPCEH26EN.I recently installed windows 8 pro 64 Bit.I formatted whole hard disk and installed windows 8.I had a oem recovery partition when i bought this laptop with windows 7 preinstalled. By this hard disk partition, I used to recover the whole windows to its factory condition by using F10 key. The recovery hard-disk partition was of only 11Gb.it contains the whole windows with some software already installed . But now i have no recovery partition now. How to create recovery partition with in 12GB for future purpose.The windows default system image creation usually taking 40 gb space. So its of no use. How to create a recovery partition which can be used to recover windows to its factory condition using F10 key in case of any error in future?
View 4 Replies View RelatedI am trying to create recovery discs from "Dell backup and Recovery application" however when i was asked to insert the second DVD,the optical drive keeps rejecting the DVD. The application will not continue to burn the second DVD and appears to be frozen. I tried with different brands/makers of DVD and also -/+ R. Unfortunately .Issue remains. I was able to find this article 593906 Published on 2013-01-21 ( relative link [URL]... ).
Although i have done the updates ,i am still not able to create recovery discs !! Current Issue: after inserting the 3rd Disc application gives the following message "Dbr.exe -No disc found" and stays there and rejects the DVD. I spoke with Dell's Greek Support team. I was told that warranty does not cover sw support even if my unit is less than a week old. Furthermore i was informed that although "Dell backup and recovery" application says DELL is not actually a Dell product thus they can't support it. They suggested my to use windows 7 file recovery instead (which needs at least 8 DVDs !).
(Model : inspiron 15 3521) .
If you have a recovery drive - that includes the recovery partition - made on one computer, but have a toshiba laptop with a bad drive (but the recovery partition is ok), can you replace/copy the partition on the recovery drive with the recovery partition from the bad laptop HD?
My friend's laptop would not boot, and would not factory recover, reset, or refresh. I tried to clone the hard drive before I started messing with the disc. It would not clone, but I was able to copy the recovery partition to a USB drive.
He never make recovery discs, so could not re-install, but I can borrow the recovery drive that my aunt made for her laptop.
so one of my computers entered a boot loop and I'm pretty sure the only way to fix it is using a recovery drive. Only problem is the only other windows 8 PC in the house doesnt let me create it. I go through the steps outlined in this thread: Recovery Drive - Create with USB Flash Drive in Windows 8 but i get stuck on step 6. When I insert a USB drive the create recovery drive setup doesnt seem to recognize it. It just refreshes (which shows that it detects a usb being inserted) but nothing shows up. Oddly enough, I can access the usb drive through my computer and copying/moving etc files still works. How can I make it so it appears?
View 9 Replies View RelatedI have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
I would create a new partition in Windows 8.1 , how to do it?
View 1 Replies View RelatedI just bought Asus UX31A-R4005H (with Windows 8). Unfortunately Asus doesn't provide any application to restore Windows 8 back to factory conditions. So i need to recovery whole hard drive partitions back to factory settings.
Firstly i need to create a set of OEM factory recovery discs/usb flash.
1. I'm planning to create a system recovery drive (usb flash) with Windows 8 but i wonder if this usb flash will recover whole hdd back to factory conditions? If yes is it enough to use Windows 8 "create a recovery drive" option?
2. How could i create an original OEM factory recovery usb flash with 3rd party application?
When I first got this PC, I made the Recovery DVDs as instructed. Now, I want to make a Recovery Flash Drive, but HP only allows creation of one Recovery item. Is there a way to create a Recovery flash drive after I've already made DVDs?
View 9 Replies View Relatedi have installed windows 8.1
clean setup, i have erased windows partition and then created it
for some weird reason it would show me boot screen whether i have to decide to choose between Windows 8.1 and Windows 7 XE Loader
How Often Do You Create a System Recovery Image?
View 9 Replies View RelatedI decided that I should, create a System Recovery DVD for my new computer. However when I try and do it I only get the option to create a recovery USB Drive.
I did that but I'd still like to make a DVD disk.
Ps. I see that my system recovery USB drive has an empty folder called Sources. If I was to place a backup of my C: drive in that folder would it be automatically accessible and usable from the DVD drive?
Hmmm, I can't seem to find a way to use Windows to create a backup of my C: drive either.
I recently bought a Dell Windows 8 desktop. I upgraded the desktop to Windows 8.1. I want to create a recovery drive using a DVD rather than a flash drive. (I understand Microsoft wants you to create recovery onto a flash drive rather than a DVD. Not sure why.)
I found several places on the net which discuss just how create recover onto a DVD. They suggest that I do a search on "Windows 7 file" and this will display an option to click on "Windows 7 File Recovery" ... and that will lead me through the steps to create my recovery onto a DVD.
Problem is "Windows 7 File" is not found. How do I get this onto my Windows 8.1 system?
I bought an Acer notebook with Windows 8 SL (Single Language) and UEFI BIOS (with Secure Boot) factory installed (Windows Key is set in Bios).
I have the habit of installing all programs and make an image of partition C: in case of having to reinstall the entire system for problems with Windows, HDD exchange or similar cases. With this gain too long and not have to reinstall all the programs one by one.
My HDD is partitioned into 4 parts: C:, E:, F: and G:.
When I enter the Windows 8 app to generate the system image appear two partitions pre-marked for backup: C: (Programs) and EFI System Partition (no drive letter). C: partition is formatted as NTFS, but the EFI is as FAT32.
My question is: when I restore this, how should I format the partition where you install the system again (C ? Format all the partition as NTFS and Backup app creates the EFI partition FAT32 by own?
How it works and how to proceed? I will boot the system by CD-ROM.
My new Toshiba laptop runs Windows 8, boots in UEFI mode and GPT formatted, can I create a logical partition solely for storage so that when I format/recover windows partition like windows system image restore, the files and folders stored in the partition is not affected?Just like I did in my old windows 7 laptop that boots in BIOS mode and MBR formatted, which I put the partition as D: drive? Are there any possibilities I do that without messing up the system?
View 1 Replies View RelatedI just purchased a brand new laptop (Lenovo s400) with Windows 8 (which was promptly updated to 8.1) and since I don't like having OS and personal files on the same disk, I used Partition Master for creating a new Partition to keep my files.
After PM rebooted the system, Windows doesn't boot and shows an error coded 0xc0000225. Lenovo adds a button to access System Recovery, but again I get the same error. As far as I can remember, I've never seen a recovery partition and no disks were included (Should've created a recovery USB drive as soon as I took it out of the box).
I would like to emphasize that this hard drive wasn't formatted, just re sized.
I have an HP Envy with a recovery partition. I did indeed create a dedicated USB drive that copied the recovery partition from the partition on the hard drive that shipped with the unit.
I wanted to create a restore registry type of system repair disk as you could in Windows 7. However even though I read that the option should appear in the Recovery Options that says: Create a Systems Repair Disk with a CD or DVD (see System Repair Disc - Create in Windows 8), that option never appears.
While I do have Acronis as a backup I would like a quick bootable CD/DVD that offers a registry restore option. But perhaps that is what the recovery partition is for and when the time comes it will offer me that option, not sure (????).
Or may be there is a separate .iso I can downlaod and burn like I did for Win 7 32 bit and 64 bit.
I have read the tutorial (Refresh Windows 8 - Create and Use Custom Recovery Image) . Would I not get the same result if I created a Disk and Partition Backup using a program like Acronis or Easeus? That way I hope to keep all my initial system, personal files and third party applications.
View 5 Replies View RelatedThis is for a Samsung NP550P5C... having typed it into Google, the options appear a little confusing with the best option being how to make recovery discs for an HP laptop (presumably using HP's built in wizard), requiring 4 DVD's. Other suggestions seem to tell you how to make a "Repair" disc for Windows 8 with one readers comments of.....
" Windows 8 recovery Disk is used to reset your PC - it is supposed to reload the operating system and restore factory default settings. You need a USB flash drive 16GB or larger. I haven't found yet a way to create Windows 8 recovery CD/DVD, which can be used to reinstall the operating system."
It's not even clear how to do it on a Flash Drive though I would prefer using discs...
I have done the partition of HDD of my new Dell inspiron 7520 laptop and now I am not able to create a System Recovery disk nor in USB drive. System keeps on reading the disk or Drive.
View 2 Replies View RelatedI recently upgraded my HP Pavilion m6-1000 to windows 8 from windows 7 using windowsupgradeoffer. Since then, I have only experienced bugs and problems with my computer so I want to downgrade to windows 7. I didn't get a recovery disc when I bought the computer, but I have a recovery partition on the computer, called "Recovery (D:)". I also have the product key for windows 7
I have read that it is possible to downgrade using this partition
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
View 9 Replies View RelatedI have Windows 8.1 PC, then i installed EaseUS Partition Master 9.3 (All Editions), So i am having seperate ISO of WinPE, so i like to know "How to install WinPE on PC" because i want to Create EASEUS 3.9.0 Bootable CD.
I am having all the files like this below.
1)--EASEUS Partition Master 3.9.0
2)--WinPE ISO image ( in this iso there is no SETUP file is there, so how i should install this WinPE) If i install WinPE then i am able to create EASEUS Bootable CD.
I'm having a hard time trying to create a partition on the main HDD, in order to perform a Windows 7 installation, since Windows 8 is giving me several compatibility problems, and many software developers (e.g. Adobe Systems) said to me that Windows 8 support is not available since it isn't officialy released yet.
According to Windows 8 "Computer Management" utility (very similar to the Win7 one) the maximum size of available shrink space is up to 86 GB. Nevertheless I desire to create at least a 250 GB partition (HD is 1.5 TB and free space is 620 GB).
I found out on the internet this could be due to MFT files. I followed an old guide, run the Disk Cleanup Wizard, disabled system restore, the pagefile, the kernel memory dump and the hibernation mode. I morover run several instances of 3rd party defrag softwares such as Perfect Disk: I run the SmartPlacement, the defrag, the consolidate free space and the Prep for shrink tools, none of them with a positive result.
Though MFT files seems to be at a right place, around 5 GB from the disk beginning.
I need to create a partition on my PC and I've followed tutorials but I always run into the same problem: Right clicking a volume in disk management only gives me a "help" option. I've connected external storage and it gives me the menu shown in the tutorials/how-tos.
Is there something I'm missing? I've followed all the steps to the letter, save for the ones that are not possible on my PC (shrink volume/etc)
Additional info: PC is an Acer Aspire V3-551 laptop
The HD was replaced a few months ago and the original OS updated to 8.1 from 8
I wanted to remove the hidden recovery parition on my Asus Zenbook UX31A, which is 20GB in size, and I need that space, because the laptop just has a 128GB SSD, and I am permanently on space limit of about 1-2GB and Windows isn't working anymore properly.
when I open the Windows 8 recovery tool, the option for copying the recovery partition is greyed out. I googled for this, and I just could find informations about, that this can happen, but not why, and how to solve it.
I want to create recovery disc (from recovery partition of my laptop), but I'm not able to do it in Win 8.1. They removed this option in Win 8.1.
I'm able to create recovery usb. I tried to copy all files from usb to BluRay and burn (in Linux). But I'm not able to boot from BluRay, boot from USB work's. how to create bootable BluRay? Or how to copy files from usb to BluRay and make BluRay bootable?