Samsung NP550P5C - How To Create Windows 8 Recovery Disc
Dec 26, 2012
This is for a Samsung NP550P5C... having typed it into Google, the options appear a little confusing with the best option being how to make recovery discs for an HP laptop (presumably using HP's built in wizard), requiring 4 DVD's. Other suggestions seem to tell you how to make a "Repair" disc for Windows 8 with one readers comments of.....
" Windows 8 recovery Disk is used to reset your PC - it is supposed to reload the operating system and restore factory default settings. You need a USB flash drive 16GB or larger. I haven't found yet a way to create Windows 8 recovery CD/DVD, which can be used to reinstall the operating system."
It's not even clear how to do it on a Flash Drive though I would prefer using discs...
I've got a Samsung NP550P5C laptop with the following specs :
-i5-3210M -6 GB RAM @ 1600 MHz -1 TB HDD @ 5400 rpm -2 GB nVidia GT650M with Optimus -Windows 8 Single Language 64-bit
It came with Recovery partitions. Now using the Samsung Recovery application I had copied my recovery files to another external HDD alongwith a backup of C drive. Now all these are in some weird extensions. I refreshed my PC and then the problems began. The problems were :
-No Fn key working -Samsung recovery did not recognize factory condition recovery point,i.e,Factory reset option was gone. -The backup on external HDD was showing up on Samsung Recovery, but after clicking on it, it would go on a restart and recovery never happens.
I want to create recovery disc (from recovery partition of my laptop), but I'm not able to do it in Win 8.1. They removed this option in Win 8.1.
I'm able to create recovery usb. I tried to copy all files from usb to BluRay and burn (in Linux). But I'm not able to boot from BluRay, boot from USB work's. how to create bootable BluRay? Or how to copy files from usb to BluRay and make BluRay bootable?
I am trying to create a system repair disc, and I am getting the message: "do not have the files to create system repair disc". Why? How do I get those files. Never had a problem like this trying to create a system back up in the past. Running Windows 8.
My Gateway machine was performing a windows update when the neighbourhood power went out. It was off for four hours. When I went to turn the computer back on, it said automatic repair the diagnosing your pc.....that lasted about 5 hours! Then a blue screen with options came up. When I went to pick the advanced options, I clicked accidentally on the first one and it rebooted into the repair loop again. Since it takes so long for the diagnostic part, when the blue screen came up again it was likely the middle of the night.
I saw it at 7:00 am and tried to click the advanced options but the computer had gone to sleep by then and so once again it got rebooted into the loop. Gateway refused to support since the warranty is up. I can't find a Recovery disc image for 8.1 to put on a usb stick, and I'm back to trying to find answers on my 12 year old machine running XP. I tried the boot to safe mode with alt+F10 but can't get that to work either. If I knew how to force a reset to factory defaults without being able to get into windows I would. I've been doing this for 3 days now and I was just starting to like 8.1 too...
I have already created two Recovery Disc for my Dell 15R 5537 with OS Windows 8.1. Yesterday, i tried to create a partition and mess up the whole laptop. I tried to use the two Recovery Disc to bring the laptop back to its original factory OS. I booted with Disc 1 and works fine; when Disc 1 finished, it ejected, and I put the Disc 2 in. Then it no longer continue. It stuck at:
Progress: 53% completed
OK - Initializing.......
OK - Backing up Dell Backup and Recovery settings...
Then, the "Preparing your hard driver..." just keep turning and won't go any further for several hours.
I am trying to create recovery discs from "Dell backup and Recovery application" however when i was asked to insert the second DVD,the optical drive keeps rejecting the DVD. The application will not continue to burn the second DVD and appears to be frozen. I tried with different brands/makers of DVD and also -/+ R. Unfortunately .Issue remains. I was able to find this article 593906 Published on 2013-01-21 ( relative link [URL]... ).
Although i have done the updates ,i am still not able to create recovery discs !! Current Issue: after inserting the 3rd Disc application gives the following message "Dbr.exe -No disc found" and stays there and rejects the DVD. I spoke with Dell's Greek Support team. I was told that warranty does not cover sw support even if my unit is less than a week old. Furthermore i was informed that although "Dell backup and recovery" application says DELL is not actually a Dell product thus they can't support it. They suggested my to use windows 7 file recovery instead (which needs at least 8 DVDs !).
In Windows 8.1 they removed option to create bootable DVD/BluRay recovery. Only USB drive left.
I bought new laptop with recovery partition and I want to move backup to DVD's/BluRay. How can I do that? I don't want to do backup of backup. I want to recovery directly from DVD's/BluRay.
So using of tools, which backup this recovery parition isn't solution. Than I have to restore partition and from partition restore system. I tried backup on usb and burn all files to disc, but BluRay didn't became bootable. USB was.
One of the first things I did when I had my new PC last year was to make a set of recovery discs. Now having used the free upgrade to Windows 8.1 I would like to make a set of backup discs for this version, however, my pc say that a set has already been made and I can only make the one set.
If things stay like this, when I want to do a recovery using either the hdd partition or the discs I made, it installs Windows 8 and then I have to install what seems like a million updates before I then have to go back to the store and do the upgrade to 8.1.
Is there a way I can make a recovery dvd's for the 8.1 version ?
I am working on a Toshiba Satellite C855D (Windows 8 originally) that would not boot. I tried the repair, restore, and recovery but that did not work. So I used a recovery disc from a Toshiba C55D (Windows 8.1) and got it working. The problem I have is the c855d now shows as the c55d. My question is does the product key come from the motherboard or the software.
I just bought Dell Inspiron 14, 3421 yesterday and trying to create Disc from Backup and Recovery Software provided by Dell.
I have bought this india and found mulitple post facing the problem what I am facing. I have upgraded Dell Support Center and Also Dell Backup and Recovery using the Update tile. I have windows 8. BIOS A04.
These are the problems I am facing....
Problem1: After writing to Disc1, it does not accept 2nd disc and keep ejecting 2nd disc again and again
Problem2: Even if I insert USB, the software still does not dectect USB.
I am not able to create any backup even after trying 3-4 times.
I bought a brand new Acer Aspire xc600 today and it had Windows 8 installed. First thing me and my husband did was to try to install win7 (as we dislike Windows 8 for many reasons)... When it didnt work with just putting in the cd and install, we (stupidly without making recovery discs as we thought we would never need it) formated the drive and made it completely clean before installing win7 (which works now). This means we have no Windows 8 recovery disc or E-recovery management program and therefor cant do factory reset and return this piece of crap pc... (We play world of warcraft and my 7year old pc has only been updated once when it comes to graphic card to geforce 9800 and still perform better outside the game).
The performance test of the whole system give the graphics a lousy 5.0 which is worse than my husbands 3yr old graphic card as well! Only numbers that have increased is the RAM and CPU.
I feel disappointed as the graphics card should be better than mine or my husbands and have better performance even if its the "laptop sized card".
So to the issue, is there a way we could restore/reinstall the computer to factory settings with Windows 8 and Acers drivers as it was when we started it up earlier today?
I am trying to create a recovery media for my Inspiron 15R laptop. I have followed the steps as per the instructions given in manual.I want to create the recovery media on DVD disc. I am selecting disc as the option but every time i m getting the error as " The burning engine was not able to start, please restart the application. I have wasted my whole day trying to create the recovery media...
I swapped out a HDD in a samsung NP355E5C-A01AU laptop which i cloned all the recovery partitions from the original to the new HDD. Its a windows 8 partition and everything seems to be there but the laptop wont boot from it at all, it just goes into bios. I did get it to try and read from the recovery partition but get a "MBR error 1" when it tries to boot from it. I used aronis disk director 11 to do the cloning if that works. Also the original HDD was a GPT partition and thats wat i have formatted the drive as. Ive done some reading and acronis can be difficult when cloning recovery partitions and it will give u this MBR error.
So I had this recovery error that said my winload.efi was missing so I ran the recovery from boot up and decided to recover. I read that this will delete the files from C: so I turned on the "Maintain User Data" option and selected all including the local disk c from advanced selection. But when the process was finished, my laptop was empty and no data was restored. What happened ? did I just misunderstand how it works and now it's gone ? or is it just somewhere I can't find ?
I just bought Asus UX31A-R4005H (with Windows 8). Unfortunately Asus doesn't provide any application to restore Windows 8 back to factory conditions. So i need to recovery whole hard drive partitions back to factory settings.
Firstly i need to create a set of OEM factory recovery discs/usb flash.
1. I'm planning to create a system recovery drive (usb flash) with Windows 8 but i wonder if this usb flash will recover whole hdd back to factory conditions? If yes is it enough to use Windows 8 "create a recovery drive" option?
2. How could i create an original OEM factory recovery usb flash with 3rd party application?
I decided that I should, create a System Recovery DVD for my new computer. However when I try and do it I only get the option to create a recovery USB Drive.
I did that but I'd still like to make a DVD disk.
Ps. I see that my system recovery USB drive has an empty folder called Sources. If I was to place a backup of my C: drive in that folder would it be automatically accessible and usable from the DVD drive?
Hmmm, I can't seem to find a way to use Windows to create a backup of my C: drive either.
I recently bought a Dell Windows 8 desktop. I upgraded the desktop to Windows 8.1. I want to create a recovery drive using a DVD rather than a flash drive. (I understand Microsoft wants you to create recovery onto a flash drive rather than a DVD. Not sure why.)
I found several places on the net which discuss just how create recover onto a DVD. They suggest that I do a search on "Windows 7 file" and this will display an option to click on "Windows 7 File Recovery" ... and that will lead me through the steps to create my recovery onto a DVD.
Problem is "Windows 7 File" is not found. How do I get this onto my Windows 8.1 system?
I finally broke down and bought a modern laptop Asus A55A (K55A) and installed Ubuntu 12.04 in a dual boot situation. With the nefarious secureboot and other such nonsense Windows 8 install met with an untimely demise. However, I have the files left on the recovery partition (copied to my 16gb usb) and need to make an install disk. My only issue is that I can't find a way to do it in Ubuntu as all the tutorials I find assume that Windows is installed. Is there a way to make a bootable Windows 8 install usb or iso from the files on the recovery partition-without using Windows to make it? I would love to re-install Windows 8 and then setup a stale dual boot.
I have read the tutorial (Refresh Windows 8 - Create and Use Custom Recovery Image) . Would I not get the same result if I created a Disk and Partition Backup using a program like Acronis or Easeus? That way I hope to keep all my initial system, personal files and third party applications.
Brand new laptop. HP. 17e UEFI +GPT etc. Upgraded to 8.1 from 8, first thing. Then clicked on the MS, create recovery. (in blind hope of a clean 8.1 restore). Inserted (32gb stick) (later found out is illegal windows 8 version, that is not removable.) SD-extreme, 32gb. list on toms HW, as winner of all, (and is useless for this app).
So I pull out my very old SD cruiser glide, 32gb (old , slow and not win 8 cert (a good thing). Yes all 32gb extremes are mapped as HDD not removable media and is doomed. (known on all forums) but same error.
The cruiser shows up i device manager under removable media....btw i want to find out why the missing files error. I have a HDD and SSD, with latter mirrored. both the orig, HDD fails and SSD fails. same way. I parked the HDD , and run only SSD. but both fail... (my guess is , upgrades 8.0 to windows 8.1 is cause).
now the screen, attached
How can i find the log of these errors, it's not in event viewer.. oddly. sfc/ scannow works. as does chkdsk, and restore (create) works,. and system is Fast a lightning. All HP apps works, cept there version of create disk for same reasons.
My HP create recovery now works on the GLIDE. (old very old 32gb stick i had laying about). So now I am thinking HP? blocks the MS create so you will use theirs? But I'd lilke to know this, what files are missing....
so one of my computers entered a boot loop and I'm pretty sure the only way to fix it is using a recovery drive. Only problem is the only other windows 8 PC in the house doesnt let me create it. I go through the steps outlined in this thread: Recovery Drive - Create with USB Flash Drive in Windows 8 but i get stuck on step 6. When I insert a USB drive the create recovery drive setup doesnt seem to recognize it. It just refreshes (which shows that it detects a usb being inserted) but nothing shows up. Oddly enough, I can access the usb drive through my computer and copying/moving etc files still works. How can I make it so it appears?
Will there be issues if I try to create a Windows 8.1 USB Recovery Drive on a USB Flash Drive larger than 32GB? The Create a Recovery Drive actually formats the USB drive in FAT32 and makes it bootable. I plan to purchase a 64GB USB flash drive. Will the Recovery Drive Creator repartition the USB Flash Drive as a 32GB FAT32 partition? I tried the same on an external USB hard drive and it repartitioned the external hard drive as a 32GB FAT32 partition.
My sony vaio laptop model is VPCEH26EN.I recently installed windows 8 pro 64 Bit.I formatted whole hard disk and installed windows 8.I had a oem recovery partition when i bought this laptop with windows 7 preinstalled. By this hard disk partition, I used to recover the whole windows to its factory condition by using F10 key. The recovery hard-disk partition was of only 11Gb.it contains the whole windows with some software already installed . But now i have no recovery partition now. How to create recovery partition with in 12GB for future purpose.The windows default system image creation usually taking 40 gb space. So its of no use. How to create a recovery partition which can be used to recover windows to its factory condition using F10 key in case of any error in future?
I would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. How I can do this?
When I first got this PC, I made the Recovery DVDs as instructed. Now, I want to make a Recovery Flash Drive, but HP only allows creation of one Recovery item. Is there a way to create a Recovery flash drive after I've already made DVDs?
