Stuck In Windows 8.1 Repair Loop - No Recovery Disc

Nov 6, 2014

My Gateway machine was performing a windows update when the neighbourhood power went out. It was off for four hours. When I went to turn the computer back on, it said automatic repair the diagnosing your pc.....that lasted about 5 hours! Then a blue screen with options came up. When I went to pick the advanced options, I clicked accidentally on the first one and it rebooted into the repair loop again. Since it takes so long for the diagnostic part, when the blue screen came up again it was likely the middle of the night.

I saw it at 7:00 am and tried to click the advanced options but the computer had gone to sleep by then and so once again it got rebooted into the loop. Gateway refused to support since the warranty is up. I can't find a Recovery disc image for 8.1 to put on a usb stick, and I'm back to trying to find answers on my 12 year old machine running XP. I tried the boot to safe mode with alt+F10 but can't get that to work either. If I knew how to force a reset to factory defaults without being able to get into windows I would. I've been doing this for 3 days now and I was just starting to like 8.1 too...

View 2 Replies


ADVERTISEMENT

Windows 8.1 Stuck In Repair Loop (2nd Time)

Jun 3, 2014

About a week ago I had the same exact problem. When I would turn on my pc it would try to diagnose my computer, repair it, and then fail and find no problem. I didn't find any solutions so I did a fresh install. Now its happening all over again. I originally thought the problem was my OS and re installing would fix my problem. Now I think that my SSD (OCZ Vertex 450) might be the problem.

I think that disabling automatic repair could also fix the problem, but I don't want to turn that off and cause another potential problem if it wont stop the boot loop. I also have a hard drive which I could install windows on if I need to, but I am not sure my SSD is the problem and if it cant be fixed. I haven't been downloading anything lately, and I formatted both my SSD and hard drive when I did a clean install so I don't think the problem is a virus.

View 2 Replies View Related

Maintenance :: Windows 8.1 Stuck In Auto Repair Loop - Nothing Works

May 18, 2014

A couple days ago, I was casually playing Warframe. Tried to alt+tab out to check an IM and my screen went black. Not sure what happened as I could still hear the mouseover sounds as though Warframe were still active. Fiddled around for a few minutes and couldn't get Task Manager to come up, so I decided to just hold the power button on my laptop until it shut down. No harm done, right?

When I booted back up, Windows greeted me with a "Diagnosing Your PC" message under the normal Toshiba boot logo. After it hung there for a few seconds, it moved on to the "Attempting Repairs" screen. Didn't take long for it to decide it wasn't too happy with me for suddenly shutting it down.

Since then, I've been stuck in an auto repair loop. So far I've googled everything I could think of, but it seems my efforts were in vain. Tried putting Hiren's on a thumbdrive and booting from there, and for some reason, Windows just boots right back into the auto repair screen. I've even wiped my 1TB external and put the recovery image from my work PC on there. That didn't work either. I've gone through every thread google's given me and I feel like I'm banging my head against the wall.

I should probably note that formatting is not an option for me. I'd try installing Ubuntu on my external, but since the recovery won't even boot, I feel like that'd be in vain.

View 1 Replies View Related

Stuck On Safe Mode Automatic Repair Loop On Windows 8.1 X64?

Apr 8, 2014

I tryied to get into Safe Mode in Windows 8.1 x64 and got looped by Automatic Repair loop

I tryied everything but without sucsess.

Safe Mode didnt come up, and it stays on Automatic Repair loop -> Diagnostics every restart/boot, and c'ant get into windows.

How do i disable this?

View 8 Replies View Related

Maintenance :: Stuck On Auto Repair Boot Loop?

Apr 24, 2014

I was playing WOW the other night on my month old PC and all of a sudden I got a full red screen. I restarted the comp and this auto repair screen popped up and it freezes and just same thing over and over. the bottom of the screen is cut off and the only other window i can get into is the bios setup utility window. Cant get into any kind of safe mode nothing.

my computer is an Gateway SX2370-UR12

View 1 Replies View Related

Stuck In Automatic Repair Loop - Refresh / Restore Won't Work

Aug 12, 2014

I accidentally removed a usb cable from a powered usb hub , and a volume slider of some other program appeared superimposed and floating above my music making program , so I restarted the pc. From then on , it wouldn't start , and kept saying preparing automatic repair, then reached 40% and wouldn't go any further.

I unplugged my 2 external drives because they weren't showing in the bios , and plugged them into my laptop to check they were ok , and I am relieved to say they are.

Since i removed the drives , my desktop ( asus ) will eventually arrive at the blue recovery screen , but all these things that are supposed to fix it , aren't working.

When I try to refresh , it says the drive where windows is installed is locked. I've tried to do a system restore from 3 different restore points and none of them have worked ( one actually cited a mozilla profile as being the cause )

Re-image wont work because it cant find the image file , which is on one of my external drives which are now unplugged. Automatic repair diagnoses , but then says it cant repair. It also will not boot into safe mode.

I can use command prompt, and was hoping I could rename the system hive name , but the command prompt says
X=windowssystem32.

I've tried cd%windir%system32config , but it says " the drive , the path, or the filname is not valid" . I have successfully ran regedit from the command prompt .....

I had no reasons to expect anything untoward before yesterday. The automatic repair thing happened before , about 4 months ago , but i was always able to get out of it by switching it off at the wall. Now that doesnt work and its in an endless loop .

I have hirens bootcd but there are a lot of things on it that i dont know how to use. I was able to get mini xp working via hirens but couldn't access system restore.

View 6 Replies View Related

Automatic Repair Loop - How To Use USB Recovery

Apr 1, 2014

I'm stuck in an automatic repair loop.

One suggestion has been to use a USB recovery disk but I can't create one now that I don't have access to Windows 8.

View 9 Replies View Related

Maintenance :: Stuck In Automatic Repair Loop - System Restore Not Working

May 12, 2014

My Toshiba laptop/Windows 8.1 installed a VLC Media player & Malware bytes today. I was instructed to Restart as 'drivers not working properly' & since then have been on the Automatic Repair loop. It says it cannot fix it - log file: C:WINDOWSSystem32LogfilesSrtSrtTrail.txt, & I tried a few System Restore points but that just says -

System Restore could not access a file. This is probably because an anti-virus program is running on the computer . Temporarily disable your antivirus program and retry System Restore. You can try System Restore again If you continue to see this error, you can try an advanced recovery method.

Thing is I can't get into Windows or my laptop to disable the antivirus program.

I don't have any CD or DVD & no product key as the disc has been misplaced.

View 3 Replies View Related

Automatic Repair Loop / Recovery Options Not Working

Jun 23, 2013

Recently was running a backup program and suddenly I get the Windows 8 blue error screen (the one with the mocking '' icon) and system dies. I turn on and it seems to booting very slowly then it proceeds to do the pre login screen installation of updates. After half an hour or so and with updates on around 70%, system dies again. Now when I turn the machine on it appears to alternate between either hanging for ever on the Windows 8 loading screen or attempting to run an 'Automatic Repair' which invariably results in a blank screen and no fix.

Having read several 'Automatic Repair loop' posts on the net, it appears I need to load the recovery disc and run repair or restore programs from there. Of course the CD I made failed (crappy disc?) so I had to search my original licence email and use the provided link to download and create a new installation disc from a working machine. This disc loads and gives me the option to install Win 8 (presumably a fresh install with loss of files) or a troubleshoot menu. Running the automatic repair option results in a rather inane 'Couldn't do it' message and gives a blank path to a log file. The system restore option prompts me to 'Restart and select operating system before trying this' and i'm not sure how to do this as no such option is given at boot.

View 9 Replies View Related

Laptop Can't Boot Stuck In Automatic Recovery And Can't Repair

Sep 2, 2014

[URL]

Computer was running slow so I did a reset of windows. It worked but the problem still existed. My computer froze so I turned my laptop off and back on only to find it stuck in that automatic repair loop. I tried system restore, no luck. I made that bootable usb for repairing and that didn't work either. Straight repair won't work either. I have tried every option and am completely lost as to how to proceed. I need the files off the hard drive but don't have a way to connect it to anything to be able to access the files.

View 11 Replies View Related

How To Boot Windows 8 64 Bit From Repair Disc

Apr 8, 2013

My pc is a hp pavilion 64 bit desktop computer model # P6- 2220t it is 5 months old. It originally came with windows 7 then I upgraded to windows 8. I went ahead and used windows 8 to create an image of my hard disc and store it on a usb external hard drive I also made a repair disc.

Everything went well the pc backed up on scheduled and doing well in backing up. My big problem is this I tried to boot from the repair disc but it won't I looked at the bios but it is different from the type of bios that I am familiar.

View 1 Replies View Related

Windows 8 Auto Repair Loop - Can't Boot

Apr 8, 2014

So system was running perfectly (custom pc, win 8, samsung pro ssd), just did a clean install, fresh drivers, etc. It was running great! ASUS Sabertooth p67 mobo, latest bios.

Then out of the blue, mid game, i get a hard lock up stall. no blue screen but just lock up. shut down and when i reboot, bios didn't find my samsung ssd. unplugged my 2nd sata drive, booted again and now it found the samsung ssd however i got the "no disk found press ctl alt delete"

At this point i ran windows recovery console and did the bootrec fixboot, fixmbr, rebuildbcd, chkdsk party. everything said it was completed successfully.

Now when i boot however i am stuck in an auto repair loop and can never boot into windows 8.

I am thinking the crash is somewhat power supply and/or mobo related. new power supply is on the way and mobo being RMA'ed.

View 1 Replies View Related

Windows Automatic Repair Loop Error

Oct 22, 2013

It's only been two days since I got windows 8 Pro on my alienware. Recently I force shut down because it was not shutting down. And when I open it today it gives an error message saying that Automatic repair could not fix the problem.

The error code is: "D:WINDOWSSystem32LogfilesSrtSrtTrail.txt

I have tried everything. I have used command prompt and the following commands have also been tried.

bootrec/fixMMR
bootrec/fixboot
bootrec/rebuildbcd
chkdsk/r c:
chkdsk/r d:

Nothing has worked so far. I have tried everything except a fresh installation of windows. I have already taken a backup previously. I am a little apprehensive about formatting again.

View 3 Replies View Related

Maintenance :: Avoid Windows 8.1 Automatic Repair Boot Loop?

Feb 7, 2014

Since upgrading to windows 8/8.1 x64 i have twice had this situation when during boot up windows tries automatic repair & fails , every time i restart same repair fail happens , its stuck in this cycle , neither "Refresh" or "Reset" option works , . I have to do a fresh format & install , loose all my files stored in the OS partition , I even tried to recover the files using linux boot cd but the folders were inaccessible/corrupted .

I tried every solution i could find to make it boot including Unable to refresh or reset PC after Automatic Repair fails in Windows 8 but nothing worked .

This has happened twice in the one year since i have been using Win 8 , Is there any way to avoid this from happening i future ?

View 9 Replies View Related

Dell :: Inspiron 660 - Windows 8 Struck In Auto Repair Loop

Sep 15, 2013

My inspiron 660 is struck in an auto-repair loop. Last night i was watching a dvd, my pc freeze and since i cant restart it. He try to repair then want to restore then nothing happenĀ .

View 15 Replies View Related

Restart To Repair But Endless Loop Follows

Apr 27, 2014

Windows Action Center displays this error: Restart to repair drive errors

We found errors on a drive. To repair these errors and prevent loss of data, restart your PC now. The repair could take a while to complete.

The restart completes (doing very rapid checks), and after a minute or so Action Center displays the same error again. This happens every time I start the computer. Sometimes the computer boots straight to the Start screen, and sometimes it boots to a blue screen with the option of sending a report to Microsoft before completing the boot. Sometimes it sends a report with no action required.

I have checked the hard drive using PC Checkup with MyDell, and with TuneUp Utilities, and no errors are reported. Using CHKDSK C: /f /r /x does not complete, but gets stuck at 13%.

I have also used chkdsk to check the two USB external drives that I use, and no errors are found.

[Windows 8.1]

View 1 Replies View Related

Automatic Repair Loop - Cannot Boot

Jul 19, 2013

Just reinstalled windows 8, loaded everything up and had it perfect. Then I installed a windows update (could it have been 8.1?) and then my computer would not boot. It got stuck on the windows 8 logo with the circle just spinning. After I restart it tries to automatically repair but that doesn't work. I popped the Windows 8 disc in and tried to do a system restore using a restore point but it said "You need to select an OS. Please restart the system and select an OS". ??? I'm not dual booting! Windows 8 is the only OS installed!

Tried safe mode but the windows logo just hangs. Any possibilities to salvage this before doing yet ANOTHER reinstall or refresh or whatever.

View 9 Replies View Related

Maintenance :: Windows 8.1 - Failed Boot / Preparing Automatic Repair Loop

Sep 15, 2014

Acer Aspire V5 is the PC I am using. I turn it on, the boot fails and the pc restarts. Then begins an automatic repair, which crashes and the PC turns off. It is a loop I cannot get out of. I don't have a Windows 8 Disc or anything like that.

View 2 Replies View Related

How To Create A System Repair Disc

Jun 27, 2013

I am trying to create a system repair disc, and I am getting the message: "do not have the files to create system repair disc". Why? How do I get those files. Never had a problem like this trying to create a system back up in the past. Running Windows 8.

View 1 Replies View Related

Maintenance :: Windows 8 64bit Pro - System Repair Disc Fails To Boot

Feb 10, 2013

I have Windows 8 64 bit Pro Edition working fine using UEFI boot from a SSD disk. I've twice created a system repair disk on DVD but when I use boot override in the BIOS to boot from the DVD, I get the message "Non-system disk....

View 9 Replies View Related

Windows 8.1 Stuck In Restart Loop - Configuring Updates

Feb 19, 2014

So, since yesterday, Windows 8.1 tries to boot, then gets halfway through, shows a sad face for a second, and then restarts. It does this again and again. Just get the message "Failure configuring Windows updates. Undoing changes. Don't turn off your computer" then "Configuring Windows updates, 30% complete. Don't turn off your computer".

Then it boots, does the same thing again.

I've tried booting from the install media, but Refresh doesn't work, nor restarting in safe mode. Weirdly, pressing F2 to load BIOS, which always used to work, no longer does, it just continues trying to load Windows.

I've got an oldish PC, around 4/5 years old, with Windows 8 installed. Its got a fairly decent processor (at the time), a Q9550. Intel DP43TF motherboard.

View 3 Replies View Related

Debugging :: 8.1 X64 BSOD On Startup Even With Repair Disc

Mar 6, 2014

I was getting a few driver IRQL BSOD's when my system was running, I have had it built for about a week now.But now I can't even boot, i get KMODE_EXCEPTION_NOT_HANDLED and SYSTEM_THREAD_EXCEPTION_NOT_HANDLED and some other errors I believe, after one of these comes up it says prepairing automatic repair then that will also crash and this then loops. I had seen other people saying they solved similar problems by removing the graphics driver in safe mode, but I can't even access safe mode so that made me think it might be a hardware fault.

I don't know how to save the dump file as I can't even get in to windows, can only access the BIOS. I have also tried running the windows disc to access advanced start up options to get in to safe mode but this also gives me a blue screen error.

I have a 4770K and Asus Maximus VI Hero mobo and 4x8GB Corsair RAM

View 6 Replies View Related

Maintenance :: Asus Laptop On Windows 8 - Stuck In Restart Loop

May 23, 2014

I have an Asus laptop running on Windows 8 that starts up to the initial Asus logo for a minute and then restarts over and over. I've already tried pressing f8 and it does nothing so I cannot get anywhere to attempt to fix the problem.

Unfortunately I do not have the Windows disk so I'm looking for a solution outside of having to buy another one and wiping the hard drive to reinstall.

View 9 Replies View Related

Windows Stuck And Blue Icon With Swirly Loop On Bottom

Jul 11, 2013

I was using the computer, when the power went out for like half a second, the computer ended up restarting, and while starting up, the power went out. When the power came back, I wasn't able to get past the Blue window's icon with a swirly loop on the bottom.

I've created a repair install thing and placed it on a flashdrive, and I've booted from it and tried to do system restore. After around 4-5 hours, a blue screen pops up and said something about window's encountering an error. (Too fast to catch what else it may of said)

What can I do to make my computer work again? Should I try to do another system restore. Also how long does it take to boot from the flashdrive? It takes me around 1 hour. Is it supposed to take so long?

View 7 Replies View Related

Samsung Laptop Stuck In Reboot Loop - Windows 8.1 Preinstalled

Jan 12, 2014

Using samsung chronus 7 laptop : Windows 8.1 64 bit OS.

On start up get the samsung screen then a blue screen with a sad face saying pc needs to restart. Then goes in a continuous reboot.

I tried using the Windows 8 recovery cd. But get on the screen press any key to boot from cd. but press any key has no effect and goes back into loop as before.

Press f2 to get to bios reset defaults, no luck either, tried f10 just get boot up order, unable to find what keys boots into recovery mode, f8 does nothing no safemode.

Windows was preinstalled.

View 7 Replies View Related

Debugging :: BSOD - Automatic Repair Loop After Updates

Sep 15, 2014

I included my .zip from the SF Diagnostic Tool.

I initially had a different processor and motherboard, but after changing both of those due to failures, everything is now working fine, until I do a restart. The main restart issue is that it gets stuck in an automatic repair loop until I can get to Safe Mode and then restarting from there somehow undoes the updates from Windows Update. If I keep those updates off, though, and just try to do a general restart, I get a BSOD Watchdog error. I'll include that log, just in case. It'll be in CBS.zip since I'm including the whole CBS folder from WindowsLogs. I'm really not sure what's wrong here.

View 4 Replies View Related

Sony Vaio - Automatic Repair Loop And No Product Key

Mar 19, 2014

Working as a Mainframe programmer, I am automatically assumed to be an expert in all things IT and so a friend of the family has passed me a laptop to repair

What we have is the common Automatic Repair loop. The computer restarts, states "Preparing Automatic Repair" and "Diagnosis..." etc etc, and then does it all again. I cant get to the recovery menu or bios having tried different combinations of Shift F8, F12, F2.

I have found so far recommends booting from disk. Unfortunately, the owner of the laptop has no manual or box or any record whatsoever of the product key.

The laptop came with windows 8 preinstalled. I have tried to boot from a Windows 7 DVD, but it does not appear to be recognised and continues to do the automatic repair loop.

View 9 Replies View Related

Asus X401u Laptop Auto Repair Loop

Jun 22, 2014

So i have my friends Asus Laptop with Windows 8 running on it. Every time it strts up it displays the windows logo and after staring at a black screen for a few minutes it displays the message similar to Windows has encountered an error, (i'll update with the exact message when it pops up again) for a few seconds then immediately restarts to an asus logo with the message "Preparing automatic repair" and a boot animation, followed by a black screen, then it starts all over again. i can enter the bios settings by holding escape at startup but i'm not sure what i can do from there. is there anything besides getting the os on a flash drive that can be done?

View 1 Replies View Related

Laptop Stuck In Restart Loop?

May 13, 2013

I don't know why but it has randomly started doing this in this order-

1. I turn it on, it does the normal start up screen of "Toshiba" and the loading animation underneath.

2. After a long time of waiting it takes me to a black screen. It stays that way for about 5 minutes, sometimes it does not do this and skips to:

3. Blue screen of death. It tells me it is going to restart and stays on this screen for less than a second. It repeats all 3 of these steps and does not stop.

Toshiba Satellite L850D-12P
Windows 8

View 3 Replies View Related

Gets Stuck In Infinite Reboot Loop?

Feb 16, 2013

I've installed windows 8 just now and after I install drivers it gets stuck in an infinite reboot loop. The motherboard is an ASUS P8Z68-V.

I downloaded the correct drivers from the Asus website and I've also updated my BIOS to the latest version.
I had the problem when installing the chipset driver from the asus website. I skipped this one after a reinstall and then installed the rest. Seems like that wasn't the problem. I read around but couldn't get any decent answers. I tried a memtest86+ and that came back negative. Next i tried to set the SATA settings in BIOS to AHCI/RAID/IDE, that didn't work either.

Specs:
Intel Core I5 2500K
OCZ Vertex 3 60GB
6 GB Kingston DDR3 PC10600
ASus P8Z68-V
2 other regular SATA hdd's

I just did a refresh of my install, and this time it booted. This is the list of removed apps:

View 9 Replies View Related

Auto Repair Startup Loop - Operating System Version Is Incompatible

Sep 15, 2014

Last night I was playing League of Legends when I got a BSoD. I didn't think much of it, and just waited for my computer to restart. However, as it restarted, I saw that it was auto repairing and then diagnosing. After that it said auto repair failed, giving me the directory c:windowssystem32logfilessrtsrttrail.txt. I tried system refresh, which shoot me back system refresh failed straight away. The same happens with system restart, but it takes much longer for it to say the restart failed. I have no system restore points to choose from and I have no recovery disks as Windows 8 came preinstalled on the computer. I've troubledshooted for hours and come to opening SrtTrail.txt with the command prompt. It says:

Root cause found: The operating system version is incompatible with Startup Repair.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved