I am trying to create a system repair disc, and I am getting the message: "do not have the files to create system repair disc". Why? How do I get those files. Never had a problem like this trying to create a system back up in the past. Running Windows 8.
I have Windows 8 64 bit Pro Edition working fine using UEFI boot from a SSD disk. I've twice created a system repair disk on DVD but when I use boot override in the BIOS to boot from the DVD, I get the message "Non-system disk....
My pc is a hp pavilion 64 bit desktop computer model # P6- 2220t it is 5 months old. It originally came with windows 7 then I upgraded to windows 8. I went ahead and used windows 8 to create an image of my hard disc and store it on a usb external hard drive I also made a repair disc.
Everything went well the pc backed up on scheduled and doing well in backing up. My big problem is this I tried to boot from the repair disc but it won't I looked at the bios but it is different from the type of bios that I am familiar.
I was getting a few driver IRQL BSOD's when my system was running, I have had it built for about a week now.But now I can't even boot, i get KMODE_EXCEPTION_NOT_HANDLED and SYSTEM_THREAD_EXCEPTION_NOT_HANDLED and some other errors I believe, after one of these comes up it says prepairing automatic repair then that will also crash and this then loops. I had seen other people saying they solved similar problems by removing the graphics driver in safe mode, but I can't even access safe mode so that made me think it might be a hardware fault.
I don't know how to save the dump file as I can't even get in to windows, can only access the BIOS. I have also tried running the windows disc to access advanced start up options to get in to safe mode but this also gives me a blue screen error.
I have a 4770K and Asus Maximus VI Hero mobo and 4x8GB Corsair RAM
My Gateway machine was performing a windows update when the neighbourhood power went out. It was off for four hours. When I went to turn the computer back on, it said automatic repair the diagnosing your pc.....that lasted about 5 hours! Then a blue screen with options came up. When I went to pick the advanced options, I clicked accidentally on the first one and it rebooted into the repair loop again. Since it takes so long for the diagnostic part, when the blue screen came up again it was likely the middle of the night.
I saw it at 7:00 am and tried to click the advanced options but the computer had gone to sleep by then and so once again it got rebooted into the loop. Gateway refused to support since the warranty is up. I can't find a Recovery disc image for 8.1 to put on a usb stick, and I'm back to trying to find answers on my 12 year old machine running XP. I tried the boot to safe mode with alt+F10 but can't get that to work either. If I knew how to force a reset to factory defaults without being able to get into windows I would. I've been doing this for 3 days now and I was just starting to like 8.1 too...
This is for a Samsung NP550P5C... having typed it into Google, the options appear a little confusing with the best option being how to make recovery discs for an HP laptop (presumably using HP's built in wizard), requiring 4 DVD's. Other suggestions seem to tell you how to make a "Repair" disc for Windows 8 with one readers comments of.....
" Windows 8 recovery Disk is used to reset your PC - it is supposed to reload the operating system and restore factory default settings. You need a USB flash drive 16GB or larger. I haven't found yet a way to create Windows 8 recovery CD/DVD, which can be used to reinstall the operating system."
It's not even clear how to do it on a Flash Drive though I would prefer using discs...
I want to create recovery disc (from recovery partition of my laptop), but I'm not able to do it in Win 8.1. They removed this option in Win 8.1.
I'm able to create recovery usb. I tried to copy all files from usb to BluRay and burn (in Linux). But I'm not able to boot from BluRay, boot from USB work's. how to create bootable BluRay? Or how to copy files from usb to BluRay and make BluRay bootable?
I have an HP Envy with a recovery partition. I did indeed create a dedicated USB drive that copied the recovery partition from the partition on the hard drive that shipped with the unit.
I wanted to create a restore registry type of system repair disk as you could in Windows 7. However even though I read that the option should appear in the Recovery Options that says: Create a Systems Repair Disk with a CD or DVD (see System Repair Disc - Create in Windows 8), that option never appears.
While I do have Acronis as a backup I would like a quick bootable CD/DVD that offers a registry restore option. But perhaps that is what the recovery partition is for and when the time comes it will offer me that option, not sure (????).
Or may be there is a separate .iso I can downlaod and burn like I did for Win 7 32 bit and 64 bit.
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
Recently I got problems when running SFC or DISM to repair my system. As far as I know it concerns the shortcuts in the folder Administrative Tools, there I changed under Properties the Run option to Maximised Windows and since then SFC and DISM have shown this error that the services are unable to download the proper source files (they admonish a mismatch I cannot correct).
I am running a Windows 8.1 Update 1 system without the Pro version, so I have no access to its exclusive features. I attach the corresponding log files after a run of DISM and SFC for more infos.
I had a problem where I was running UEFI with secure boot disabled and dual booting with Linux Mint which is UEFI compliant. Mint had installed Grub, Mint's boot manager but I don't like Grub so i installed rEFInd. Unlike Grub rEFInd has support for UEFI and should have worked better as a boot manager. But it gave me problems too. So I had Grub and rEFInd both installed. I could boot to both Mint and Windows but the boot managers, both Grub or rEFInd, would not show at startup like they are supposed to.
I had to boot the PC, then hit Escape getting into my options menu built into the system, hit F9 to get a list of boot options where i could then choose to boot from hard drive, cd rom, usb etc. rEFInd was in this list. Only after choosing rEFInd from here, was I able to open rEFInd and choose Windows or Mint. This is way too many steps to boot into an OS, so i thought i'd try to use the system repair disk to repair my master boot record or the EFI data that the system uses at boot under UEFI. I forgot that i had to run some additional commands under command prompt and just ran automatic repair from Advanced instead.
At this time Windows had no trouble working at all with secure boot enabled if I really needed windows to use secure boot.
It said it found but could not fix the errors. Suddenly, Windows would not boot even with secure boot enabled. I reran the tool 3 times and it didn't work so i wiped the drive and reinstalled Windows from a clean state. I really did not have errors on the system to begin with accept that the system was trying to access my boot managers in an odd manner.. although i could get everything to work.
The automatic repair option should not have made things worse, even breaking my secure boot but it did.
My point of this is to show that the repair disk tools and how they play with the EFI boot tools is buggy and it can break your system even if there is nothing wrong with Windows and it's ability to boot under secure boot. Don't trust the Repair Disk tool folks. Don't trust UEFI. Don't trust Secure Boot. Be smart. Install a clean system under Legacy Bios mode with UEFI and secure boot disabled.
Last night I was playing League of Legends when I got a BSoD. I didn't think much of it, and just waited for my computer to restart. However, as it restarted, I saw that it was auto repairing and then diagnosing. After that it said auto repair failed, giving me the directory c:windowssystem32logfilessrtsrttrail.txt. I tried system refresh, which shoot me back system refresh failed straight away. The same happens with system restart, but it takes much longer for it to say the restart failed. I have no system restore points to choose from and I have no recovery disks as Windows 8 came preinstalled on the computer. I've troubledshooted for hours and come to opening SrtTrail.txt with the command prompt. It says:
Root cause found: The operating system version is incompatible with Startup Repair.
My Toshiba laptop/Windows 8.1 installed a VLC Media player & Malware bytes today. I was instructed to Restart as 'drivers not working properly' & since then have been on the Automatic Repair loop. It says it cannot fix it - log file: C:WINDOWSSystem32LogfilesSrtSrtTrail.txt, & I tried a few System Restore points but that just says -
System Restore could not access a file. This is probably because an anti-virus program is running on the computer . Temporarily disable your antivirus program and retry System Restore. You can try System Restore again If you continue to see this error, you can try an advanced recovery method.
Thing is I can't get into Windows or my laptop to disable the antivirus program.
I don't have any CD or DVD & no product key as the disc has been misplaced.
My laptop is running ok but I have noticed that certain programs have been taking a lot longer than usual to install/update (e.g. iTunes) but they always do. Then the last few days AVG Antivirus has been wanting to auto-update the software (not just the virus definitions) but each time it would freeze during the ''configuring'' step and subsequently cause every other program running to freeze and stop the opening of any other program - although I could still move the cursor so not a complete freeze if that makes sense.
So today I removed AVG with the removal tool and tried to do a fresh install but now I get a failure message immediately telling me ''MSI Engine: failed to initialize the package''.
How to go about fixing this and ran system file check which said corrupt files were found but it was unable to repair some of them. Here is the log:
Originally Posted by CBS.log 2014-08-20 14:24:13, Info CBS TI: --- Initializing Trusted Installer ---2014-08-20 14:24:13, Info CBS TI: Last boot time: 2014-08-20 13:56:23.498 2014-08-20 14:24:13, Info CBS Starting TrustedInstaller initialization.
How to read one of these or even if it effectively evaluates the status of the installer.
While I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.
I have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
I have a Dell laptop Inspiron 15R 7537 that came with Windows 8. Yesterday I upgraded to Windows 8.1. Everything seemed to work fine after the upgrade. I shut down and re-booted several times with no issues. When I turned the computer on as usual today, I got the log in screen, then it briefly went to the desktop, then came a gray screen that blocks 99% of the desk top. This gray screen says "please wait" and has a cancel button at the bottom. It hangs forever and the cancel button doesn't work. It gives no other information.
I read several threads on the Microsoft Windows forum and this seems to be a common problem. How to boot using the Windows 8 recovery media disk that came with the Dell computer. I selected Troubleshoot, then Advanced Options, then Automatic Repair. I got a message that it couldn't do an automatic repair, so that didn't work. Next I tried System Restore, but I got a message that there were no restore points available from which to restore. Just to clarify - the Recovery Media Disk I have from Dell is for Windows 8 - not 8.1 - so maybe that's the problem.
The computer is totally worthless the way it is now, so unless there is some fix for the hanging gray screen in Windows 8.1, I would be happy just to reload the original Windows 8 Operating System. At least that worked.
So I was just about to create a full system image of one of my HDD's, and I noticed that I have 2 different "system" drives.
My main system drive is the C: Drive, which is the 111.79gig HDD. Im not really sure why the 1TB drive is listed as a system drive, as well as being drive 0. Is there any easy way to fix this so everything to do with the system is back on the 111.79gig C: drive where it belongs?
I decided that I should, create a System Recovery DVD for my new computer. However when I try and do it I only get the option to create a recovery USB Drive.
I did that but I'd still like to make a DVD disk.
Ps. I see that my system recovery USB drive has an empty folder called Sources. If I was to place a backup of my C: drive in that folder would it be automatically accessible and usable from the DVD drive?
Hmmm, I can't seem to find a way to use Windows to create a backup of my C: drive either.
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
I thought 8.1 was supposed to make things easier? Not so for creating a System Image. Now, you have to use the Windows PowerShell (Admin) to get the job done. The image below will show the command string to use (boxed in red) and my target drive is/was Z:
Zoom image to enlarge.
You can use your installation media to access the Repair function and restore your System Image from there.