How create a repair rescue disk Windows 8 to restore Registry ONLY?
''Have a new HP Envy 15t-J100. Has a Recovery Partition. I created a Boot USB stick. Fine
I recall with other Windows versions & and such you could create a repair/rescue CD that basically allowed you to restore your settings to an earlier Registry Restore Point.
Will the Recovery Manager (on USB) do this as well?
I have an HP Envy with a recovery partition. I did indeed create a dedicated USB drive that copied the recovery partition from the partition on the hard drive that shipped with the unit.
I wanted to create a restore registry type of system repair disk as you could in Windows 7. However even though I read that the option should appear in the Recovery Options that says: Create a Systems Repair Disk with a CD or DVD (see System Repair Disc - Create in Windows 8), that option never appears.
While I do have Acronis as a backup I would like a quick bootable CD/DVD that offers a registry restore option. But perhaps that is what the recovery partition is for and when the time comes it will offer me that option, not sure (????).
Or may be there is a separate .iso I can downlaod and burn like I did for Win 7 32 bit and 64 bit.
On my friend's Dell Inspiron laptop, Windows 8 will not boot. I want to boot to the repair disk to restore an image I had created. F12 on boot does not show the DVD drive as an option. I went into Setup/Boot and disabled Secure Boot, still did not show the DVD as a boot option. I went back to Setup and selected Boot List Option>Legacy. Now it shows the DVD drive as an option to boot. I booted the repair dis, went through all the dialogs to select the image I had created, but when it goes to restore it it says it cannot because the image was made in UEFI, and it is now set for BIOS.
I went back into Setup/Boot and I see that the option Load Legacy Option ROM is now Enabled, it did it on its own. As a test I set it back to the defaults and re did it as above, and again it automatically changes Load Legacy Option ROM, which I assume is what is creating the problem.
So my question is what do I need to do to boot from the Windows Repair Disk?
I have messed up my computer I need to work on! Basically, I had a freeven pro virus which I have identified by some malware software and I have deleted the registry folders where my several viruses were located. In the process I also I disabled the SYSTEM to control my account (task manager?).
The effect is that the computer at start up shows weird signs instead of English (so I can't even identify troubleshoot- but by now I've tested all options anyways and there is no reaction) but also doesn't want to log in.
The windows key is on the system of the computer (how smart) and I have no access to original cd as im away. Can I automatically repair it somehow from boot or how do i put a windows on usb to repair the computer from it?
how do you remove the tiles & create classic desktop (with a start function at bottom Left corner)without touching the registry ???
View 1 Replies View RelatedI used ccleaner on registry I saved before to documents, but I don't know how to merge, restore the files back where they belong.
HP pavilion g6-2225nr
win 8 x64 IE 10
ccleaner v4.07
Since this event my computer will NOT finish sfc/scannow,it starts and stops each time exactly at 22% and says Windows resource protection could NOT perform requested operation. So I did DISM.exe part 1 and it said no component store corruption. Part 2 said component store corruption repaired.
I am trying to create a system repair disc, and I am getting the message: "do not have the files to create system repair disc". Why? How do I get those files. Never had a problem like this trying to create a system back up in the past. Running Windows 8.
View 1 Replies View RelatedHKLMSOFTWAREMicrosoftWindows SearchGathering ManagerBackOffLowDiskThresholdMB = 0x00
HKLMSOFTWAREMicrosoftWindows SearchGatherLowDiskMinimumMBytes = 0x00
HKCUSoftwareMicrosoftWindowsCurrentVersionPoliciesNoLowDiskSpaceChecks = x01
Did I miss one? I have 12 volumes in the system, if that matters.
I am attempting to repair a Dell Inspiron 5520 Laptop for a friend of mine.
He's been having issues updating it for sometime and when he called me he was having a "Windows update hasn't been able to check for new updates for 30 days" pop-up appearing every few seconds that was rendering the laptop almost unusable.
I managed to stop that by disabling automatic updates. When I attempted a manual update I got the message :
Windows could not search for new updates: Error Found Code 80070BC9
Other times it would say it needed to be restarted and would go into a restart loop that was generally
Restart one - no message
Restart two - configuring updates - 33%, 67%, 100%
Restart three - failed to configure updates - reverting - restarting
Then would go to the normal login screen
I tried SFC /Scannow which seemed to work and say a restart is needed to implement changes but then fails on restart
DISM didn't work when attempting to run it from the machine but got to 100% when I ran it from my own Windows 8 install disk but then failed and needed a restart to undo the changes.
I also tried a repair and a restore of the current Windows installation but got : Error Code: 80070490 both times
The laptop didn't come with an install disk or serial so it seems restoring it from external media may be out of the question?
I have a Dell laptop Inspiron 15R 7537 that came with Windows 8. Yesterday I upgraded to Windows 8.1. Everything seemed to work fine after the upgrade. I shut down and re-booted several times with no issues. When I turned the computer on as usual today, I got the log in screen, then it briefly went to the desktop, then came a gray screen that blocks 99% of the desk top. This gray screen says "please wait" and has a cancel button at the bottom. It hangs forever and the cancel button doesn't work. It gives no other information.
I read several threads on the Microsoft Windows forum and this seems to be a common problem. How to boot using the Windows 8 recovery media disk that came with the Dell computer. I selected Troubleshoot, then Advanced Options, then Automatic Repair. I got a message that it couldn't do an automatic repair, so that didn't work. Next I tried System Restore, but I got a message that there were no restore points available from which to restore. Just to clarify - the Recovery Media Disk I have from Dell is for Windows 8 - not 8.1 - so maybe that's the problem.
The computer is totally worthless the way it is now, so unless there is some fix for the hanging gray screen in Windows 8.1, I would be happy just to reload the original Windows 8 Operating System. At least that worked.
Today my beloved Win 8.1 gave me a surprising license deactivation, meaning the license just suddenly became void despite working properly for some few months. I suspect two reasons:
- I changed GPU the day before (but it's not like the problem occurred right after changing GPU)
- during system boot right before occurrence of the issue Windows was performing (routine?) HDD autorepair. This could suggest that some system files were damaged in the process. My only drive is an OCZ Vector SSD.
Obviously, my license is genuine.
I did try slui.exe 4 - nothing loads after selecting region. The loading icon just keeps running. I also tried sfc /scannow. It said some files were corrupted which could not be repaired. I'm attaching the log file. I also tried performing autorepair from Windows CD - to no avail. I also ran the MGADiag I found somewhere, but this version seems incompatible with 8.1, as it says "Validation unsupported OS".
I don't even know if buying a new license key (which I obviously would like to avoid) would work for me. An activation suddenly disappearing is just so... windows...
I accidentally removed a usb cable from a powered usb hub , and a volume slider of some other program appeared superimposed and floating above my music making program , so I restarted the pc. From then on , it wouldn't start , and kept saying preparing automatic repair, then reached 40% and wouldn't go any further.
I unplugged my 2 external drives because they weren't showing in the bios , and plugged them into my laptop to check they were ok , and I am relieved to say they are.
Since i removed the drives , my desktop ( asus ) will eventually arrive at the blue recovery screen , but all these things that are supposed to fix it , aren't working.
When I try to refresh , it says the drive where windows is installed is locked. I've tried to do a system restore from 3 different restore points and none of them have worked ( one actually cited a mozilla profile as being the cause )
Re-image wont work because it cant find the image file , which is on one of my external drives which are now unplugged. Automatic repair diagnoses , but then says it cant repair. It also will not boot into safe mode.
I can use command prompt, and was hoping I could rename the system hive name , but the command prompt says
X=windowssystem32.
I've tried cd%windir%system32config , but it says " the drive , the path, or the filname is not valid" . I have successfully ran regedit from the command prompt .....
I had no reasons to expect anything untoward before yesterday. The automatic repair thing happened before , about 4 months ago , but i was always able to get out of it by switching it off at the wall. Now that doesnt work and its in an endless loop .
I have hirens bootcd but there are a lot of things on it that i dont know how to use. I was able to get mini xp working via hirens but couldn't access system restore.
Does file history also create a restore point?
It was nice to have that restore point to where is you blue screened you could reboot and restore to a recent, previous system state.
Doesn't really say anything in the file history settings page, and I'm curious.
I have a new Windows 8 hp pavilion all in one desktop computer and since a windows refresh, a month ago, it has stopped creating restore points and it fails to manually create a restore point also.
It leaves a message "THE RESTORE POINT COULD NOT BE CREATED FOR THE FOLLOWING REASON: ACCESS IS DENIED. (0x80070005)".
I have allotted 15% or 66.67 GB for this feature in the "configure" option. The C: drive is the only drive marked as "ON" to be restored. The only restore point listed is for a WinZip 17 installation on the day of the windows refresh, which was as I said before, a month ago. The are no other restore points at all and can't create one.
My Toshiba laptop/Windows 8.1 installed a VLC Media player & Malware bytes today. I was instructed to Restart as 'drivers not working properly' & since then have been on the Automatic Repair loop. It says it cannot fix it - log file: C:WINDOWSSystem32LogfilesSrtSrtTrail.txt, & I tried a few System Restore points but that just says -
System Restore could not access a file. This is probably because an anti-virus program is running on the computer . Temporarily disable your antivirus program and retry System Restore. You can try System Restore again If you continue to see this error, you can try an advanced recovery method.
Thing is I can't get into Windows or my laptop to disable the antivirus program.
I don't have any CD or DVD & no product key as the disc has been misplaced.
Is there anyway to create a Windows 8 operating disk?
View 6 Replies View RelatedI decided that I should, create a System Recovery DVD for my new computer. However when I try and do it I only get the option to create a recovery USB Drive.
I did that but I'd still like to make a DVD disk.
Ps. I see that my system recovery USB drive has an empty folder called Sources. If I was to place a backup of my C: drive in that folder would it be automatically accessible and usable from the DVD drive?
Hmmm, I can't seem to find a way to use Windows to create a backup of my C: drive either.
Brand new laptop. HP. 17e UEFI +GPT etc. Upgraded to 8.1 from 8, first thing. Then clicked on the MS, create recovery. (in blind hope of a clean 8.1 restore). Inserted (32gb stick) (later found out is illegal windows 8 version, that is not removable.) SD-extreme, 32gb. list on toms HW, as winner of all, (and is useless for this app).
So I pull out my very old SD cruiser glide, 32gb (old , slow and not win 8 cert (a good thing). Yes all 32gb extremes are mapped as HDD not removable media and is doomed. (known on all forums) but same error.
The cruiser shows up i device manager under removable media....btw i want to find out why the missing files error. I have a HDD and SSD, with latter mirrored. both the orig, HDD fails and SSD fails. same way. I parked the HDD , and run only SSD. but both fail... (my guess is , upgrades 8.0 to windows 8.1 is cause).
now the screen,
attached
How can i find the log of these errors, it's not in event viewer.. oddly. sfc/ scannow works. as does chkdsk, and restore (create) works,. and system is Fast a lightning. All HP apps works, cept there version of create disk for same reasons.
My HP create recovery now works on the GLIDE. (old very old 32gb stick i had laying about). So now I am thinking HP? blocks the MS create so you will use theirs? But I'd lilke to know this, what files are missing....
I tried to put my computer in safe mode through system configuration and when I rebooted the computer will not start. It simply does nothing, I hear the HD start to work and the light flashes but nothing, it doesn't show anything on the monitor. I do not have a system restore disk either.
View 5 Replies View RelatedI have a Toshiba Laptop Satellite L875D-S7332 Part No. PSKFQU-008003 With Windows 8 x64 Preinstalled. I created a Startup Repair Disk with a DVD. My problem is i cannot boot from this DVD. I changed the Bios to boot from DVD but it still doesn't work!
View 1 Replies View RelatedWhile I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.
the hard disk of a Samsung Ultra 5 crashed. I have got a new hard disk. How do i restore windows 8 and Samsung drivers to the new hard disk? My friend has an exact notebook. How do i copy the recovery partition from his pc and use it on mine?
View 9 Replies View RelatedRunning Windows 8 on an Inspiron 15 and the hard drive crashed (cannot boot). Of course, I did not make backup Recovery DVDs, and I am beyond the warranty period so cannot get them from Dell. However, I was able to boot the system running Linux, create a RAW image file of the OS partition, and then was able to recover my data files. Which made me wonder--are there files in separate partitions that could be recovered to create a recovery/restore disk? My goal is to replace the hard drive and reinstall Windows 8 on the new drive (assuming that the product key, which I do not have, will reactivate automatically.)
I haven't seen anything in the forums about this approach to generating reinstall disks.
My alternative, since I have been able to recover my user files, is to purchase a new laptop.
Is it possible to create restore discs that return the PC back to factory state (just out of box, never turned on)?
View 6 Replies View RelatedSince Windows 8 is not creating System Restore points, apparently because I have a dual boot Windows 8 / Windows 7 setup, I'd like to schedule one every 3-4 days or so.
Is there any way to run system restore from Command line or batch file or Powershell? If so then I could schedule it to run when I want.
I have read several times now that system restore creates a daily automatic restore point, I had a script to do this in 7 and I added it to win 8 , now I am thinking I don't need it.
I would guess it does it at start up. Having looked at the restore points going back to the 6th when i first got this laptop i dont see any instant restore points that look to have been created automatically(daily), and I don't see points for each software installed either (i read it does this also) as its a new laptop I have installed quite a few things and there ought to be quite a few restore points if this is the case.
Am trying to creat a restore point via Task Manager to run every day, but no luck so far.
Included 2 PRTSCRN where you can see what is done so far.
Strange program sometimes starts but i do not find any usable file. Probram not Always starts (Always get a capital letter in Always....)
When starting the program manually it never ends, still no files that i can use.
the program used ithe one Brink offered in the tutorials. Do not know what i do wrong.
i have to leave for France for 2 days, back on Wednesday morning, so i will not be responding before that. Just to let you know.
I have no system protection tab in System Properties box, hence I cannot create a restore point. Looking for the answer to get this tab enabled or reinstalled. I am logging in with Admin rights.
View 5 Replies View RelatedI would like to automatically create a restore point everytime I shut my computer down. I have had no success with TASK SCHEDULER (which could easily mean I'm doing something wrong). Heard of/ Use any 3rd party software for this?
View 3 Replies View RelatedI am not able to create a password reset disk.
View 1 Replies View RelatedI have a XPS 8500 with preinstalled windows 8. I tried to install Ubuntu 12.10 on it. When I partitioned the disk, I accidentally format the whole disk. Then I could not restart to Windows 8. I didn't make any backup or recovery media. How to restore factory image?
View 5 Replies View Related