I tried to put my computer in safe mode through system configuration and when I rebooted the computer will not start. It simply does nothing, I hear the HD start to work and the light flashes but nothing, it doesn't show anything on the monitor. I do not have a system restore disk either.
View 5 RepliesDumb question - if I panic and have to do a system restore or system reset using the install DVD for Windows 8 what will happen to the Windows 8.1 version I just downloaded and installed?
View 9 Replies View RelatedI have two hard disks, and I have a system image that I made of the OS, it is stored on the second disk, the one without the OS. Both disks have sharing turned off.
What happens if I can't boot into Windows, and I want to use EaseUS backup to restore my system? Will I be able to access the system image, if I boot from the EaseUS live CD? Or will I be denied access, because it is not a shared disk?
And generally speaking, is it advisable to have sharing turned off, or on? I am not on a network, but I have several user accounts on the same OS. What security settings are good for my situation.
Okay, experience is the best tutor. I booted from the CD to see what would happen, and yes, it can read the system image file off of the hard disk. But I would still like to know what are the security settings for sharing etc.
This is the message I get when I try and open system restore.
At the same time o0ther serious problems have arisen:
In control panel>programs and features all programs except those named Mi-Mo have disappeared. Some installed since are there, and those in the quick launch menu still work. Most are also missing from the start menu.
Al;so on start up I get a small window saying explorer.exe with a yellow exclamation mark and nothing else.
Automatic Restore Points is not working in System Restore. Task Scheduler is empty during last 30 days.
View 9 Replies View RelatedUnable to start Disk Management. I tried the following without success:
- Check file integrity
- Repair with DISM
- Start the Virtual Disk Service and Volume SHadoy Copy manually and set them to Automatic and Manual (it starts, but Disk Management cannot connect to it)
- Disable Firewall and Antivirus
- Verified that my system is malware free
- Tried opening it in Safe Mode
the hard disk of a Samsung Ultra 5 crashed. I have got a new hard disk. How do i restore windows 8 and Samsung drivers to the new hard disk? My friend has an exact notebook. How do i copy the recovery partition from his pc and use it on mine?
View 9 Replies View RelatedRunning Windows 8 on an Inspiron 15 and the hard drive crashed (cannot boot). Of course, I did not make backup Recovery DVDs, and I am beyond the warranty period so cannot get them from Dell. However, I was able to boot the system running Linux, create a RAW image file of the OS partition, and then was able to recover my data files. Which made me wonder--are there files in separate partitions that could be recovered to create a recovery/restore disk? My goal is to replace the hard drive and reinstall Windows 8 on the new drive (assuming that the product key, which I do not have, will reactivate automatically.)
I haven't seen anything in the forums about this approach to generating reinstall disks.
My alternative, since I have been able to recover my user files, is to purchase a new laptop.
How create a repair rescue disk Windows 8 to restore Registry ONLY?
''Have a new HP Envy 15t-J100. Has a Recovery Partition. I created a Boot USB stick. Fine
I recall with other Windows versions & and such you could create a repair/rescue CD that basically allowed you to restore your settings to an earlier Registry Restore Point.
Will the Recovery Manager (on USB) do this as well?
On my friend's Dell Inspiron laptop, Windows 8 will not boot. I want to boot to the repair disk to restore an image I had created. F12 on boot does not show the DVD drive as an option. I went into Setup/Boot and disabled Secure Boot, still did not show the DVD as a boot option. I went back to Setup and selected Boot List Option>Legacy. Now it shows the DVD drive as an option to boot. I booted the repair dis, went through all the dialogs to select the image I had created, but when it goes to restore it it says it cannot because the image was made in UEFI, and it is now set for BIOS.
I went back into Setup/Boot and I see that the option Load Legacy Option ROM is now Enabled, it did it on its own. As a test I set it back to the defaults and re did it as above, and again it automatically changes Load Legacy Option ROM, which I assume is what is creating the problem.
So my question is what do I need to do to boot from the Windows Repair Disk?
I have a XPS 8500 with preinstalled windows 8. I tried to install Ubuntu 12.10 on it. When I partitioned the disk, I accidentally format the whole disk. Then I could not restart to Windows 8. I didn't make any backup or recovery media. How to restore factory image?
View 5 Replies View Relateduse of System Restore to return to Windows 8 after the upgrade to Windows 8.1 Preview?
View 1 Replies View RelatedI have windows 8.1 and cannot find system restore.The last windows update has changed some things on my computer and I would like to go back to an earlier date.I search for the restore,but only get my bookmarks file.The update has changed my zip files icon to a sheet of paper that I cannot open or extract. There is a system restore. I should add I have the classic shell not the original windows 8
View 4 Replies View RelatedHow do I access the System Restore function for W8?
View 2 Replies View RelatedThis button is not working. The window doesnt hang. There is no error message. It just doesnt say anything. I am trying to install Visual Studio 2013. It needs to create a system restore point before starting installation. Needless to say, it fails too. I am on Windows 8.1. I ran sfc /scannow with no results.
View 3 Replies View RelatedI made a system image from Windows 8.1 using Windows' own system image feature. I seem to be unable to restore it. I booted with the Windows 8 disc, and told it to restore from a system image. It found the image, ran a few minutes, then failed because of version mismatch (?). Not before hosing the entire system, by the way. Luckily, I was well backed up.
I booted with the Windows 7 disc, and it didn't even see the system image (on my external HD). It saw my Windows 7 system image and restored it just fine, and here I am.
Anyway, is there some trick to restoring a Windows 8.1 system image? I am not running Windows 8.1, so I can't generate a repair disk that way. Is there one available online somewhere for download?
how to do a System Restore on my Win. 8 machine. I have the four blue square start button at the bottom left.
View 3 Replies View RelatedI have created two disk images. I deleted the first one but in the restore point pop up the title is still here (but is empty!!! The red one.) How can delete it????
View 3 Replies View Relatedsome have been successful converting GPT partitions to MBR. I'm still trying to get TrueCrypt to run on my Fujitsu Win 8 laptop with GPT. TrueCrypt does not currently support GPT, and it looks doubtful if it ever will.
I have spent some time creating image files and restoring them with True Image 2013. I have not found a way with that program to get Win 8 to be formatted as MBR.
I wonder whether one or more of 13 recent Windows Updates has caused an issue. I can use System Restore to take my PC back to September 7th, three days before the Windows Updates were installed (there is just a Java update that has taken place since that I would have to carry out again). Alternatively, I can uninstall the Windows Updates one at a time or all together to see whether that rectifies the situation. Is there a preference? Should I uninstall from the highest KB number downwards if I uninstall the Updates one at a time?
View 3 Replies View RelatedI have two restore points in System Restore that will not be removed.
Both are System Image Restore Points that were created when I was experimenting with the Windows 7 Recovery backup tool in Windows 8.
The backups were unsuccessful so I deleted them but I have been left with these two Restore Points....how I can remove these.
I have tried all the suggestions in this tutorial but nothing works [URL] .....
I am using Windows 8.1x64 in UEFI mode. My motherboard is Gigabyte H77M-D3H. My hard disk is configured to use AHCI. A few days back I needed to use system restore from my repair disk because of a system crash. To my horror when I selected System Restore from my Windows repair disk it showed-:
"To use System Restore, you must specify which Windows Installation to restore. Restart this computer select an operating system, and then select system restore."
Now I don't have multiple Windows installations but I do have Debian Linux x64 dual booted with Windows 8.1. the Debian Linux also boots in UEFI mode. Is this problem caused by the fact that I am dual booting ? Has Linux dual booted, check if you can system restore from the windows repair disk.
I can perform a system restore from the inside of the OS fine. But I need it working from the outside also. What I have tried is running diskpart from the repair disk and selecting my partition on which Windows is installed and then running system restore but this had no effect. Can I boot up windows and then select to boot from my CD ? Like, before Windows completes booting I can have the repair disk boot up or something. Could it be that I am booting my CD in legacy rather than UEFI ?
PS-: My Windows 8 was upgraded from an installation of Windows 7. But I have already deleted the Windows.old folder in C drive.
Having tried unsuccessfully to program Task Scheduler (in 8.1), I found at the above site in Windows 7 forums a shortcut for a script which supposedly simplifies manual creation of a System Restore point. However when I use it the Restore Point created with the script carries the notation "Install" in the list of Restore Points.
View 1 Replies View RelatedI recently had to do a system restore through the Dell System Restore programme, however now it appears I cannot activate Windows 8 - I get the "Windows cannot activate right now. Try activating Windows later".
I have tried entering manually through a command prompt but all I get is an error 0x8004F80B. How to resolve this?
My windows 8 pro install messed up n i have almost 2.8tb of stuff on my drive on a 3tb hd. I have an identical hd as a backup which i have (an apparently successful) a backup of my system from a couple of weeks ago on. I had set the system to do scheduled backups of the system (set to backup a system image of efi partition and c. There were a few times where i was trying to get other things done and the systemwas running slow so i cancelled the backups when i noticed them running. The software stopped the backups (seemingly successfully).
As i say my system messed up - i came home to find out it was no longer downloading (as i had left it doing when i went to work) but was on a blue screen (bsod?) saying the system needs to be restarted. Since then it didnt work well at all and after dskchk reported that several sectors were damaged so it was moving data to spare sectors (or whatever it generally reports when this happens) there were a lot of files messed up or reported as deleted when doing a file recovery scan with recuvva.
So i decided to restore the backed up system image from the other hd. Incidentally i tried mounting the vhdx backup image from that hd via windows explorer which then reported "the disk needs formatting" and didnt get any success mounting via disk management either (it mounted in the app but didnt show up on windows explorer and if i tried to access info on it via disk management it reported the same"disk needs formatting prompt".
So when i booted my win 8 dvd it didnt work cos the dvd wasnt an efi booting version so i had to boot from a usb version with the efi bit included.
I formatted the system drive and chose to do an image restore. It started doing the restore (apparently) but every time i came back to it later i had the follwing error:
"Re-image your computer
The system image restore failed.
Error details: The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria Ox80073B92"
It took me so long to set up my system n i have a lot of my own data on there too. The system drive I formatted was created in diskpart and then re formatted with "format" command (as it created the disk in raw mode) so now it is ntfs mode (uncompressed).
I have a windows 8.1 dell laptop ,for some reason system restore is not creating points manually or automatically, when I try to make a restore point manually the working bar just keeps moving at the sane time though I noticed in the device manger a generic volume shadow copy entry will show up with a yellow mark beside it ,I have tried maybe 10-15 times to uninstall this and try system restore again ,but this keeps repeating itself,
I have also went into safe mode but system restore points can't be made under safe mode, I did the repository thing where I rename that folder to old and reset repository in safe mode ,same result .
I'm running Windows 8 on an HP P2-1310.
Examples where I see the windows busy circle:
1. I right-click on the recycle bin icon2. If I right-click on the recycle bin I get the busy icon. For a few minutes, I get the busy icon if I hover over the recycle bin. Eventually, things seem to go back to pre-busy state in that I don't get the busy icon, but the right-click menu never appears. I get a busy icon for the recycle bin even if I shut down browsers, etc.
2. right-click on the time and date in the lower-right portion of the screen, in an attempt to launch Task Manager. If instead I do CTRL-ALT-DEL I get launch Task manager immediately.
Maybe related: if I bring up Control Panel - System Properties - System Protection, the 'Protection Settings' table says:
"Available Devices
Searing"
forever.
The System Restore button is grayed out.
Occasionally, I get the busy icon in other cases, but I have yet to find it repeatable.
When I get the busy icon, it is only on the application mentioned, above. I can generally operate a (3rd party) browser with no problems.
Task Manager reports the sort of numbers I'm used to seeing when things are running normally:
1. ~50% CPU usage (due to browser).
2. ~25% memory usage
3. 25% disk usage
4. 0% network usage
I now have gotten things into a mode where the desktop is semi grayed out and shows the busy icon if I hover the mouse over the desktop. Also, I get the busy icon if I hover over the 3rd party Start button or any of the app buttons on the task bar (this is the bar just to the right of the Start button; I hope I'm using the right term).
I was on my samsung laptop last night, and I found a folder called "Searches>Indexed locations". I saw it was taking up some space so i went through some of the files seeing that some were Type:Shortcuts. So I deleted them to free up a bit of space thinking "it's only a shortcut, can't harm it". Now some icons are missing from my windows 8 start screen and some programs have become inoperable because of missing files. I tried System restore to bring some of it back, it was going ok, then when it tried to restart, showed the samsung logo, then just blackscreened for 4+ hours. It was on , but blank. Haven't been using the laptop long so I don't really know the specs on it.
It came with no DvD/CD for me to use to format the laptop and I cant get it on to boot it up right for me to format it to begin with.
I atleast do know the graphics card was an AMD Radeon HD 7460
Can't seem to access Bios either.
One thing I forgot to mention which might have something to do with it, is I was using a custom windows 8 theme, because microsoft, being as stingy as they are, from what i assume does not enable you to have your own theme, so I had something called the "ribbon disabler and UXTheme Cracker" to use a custom windows 8 theme.
When I ran my disk clean up for the system, it reflected "Windows update cleanup" at 106 mb.
I feel sure it is left overs from my recent upgrade to win 8. To be sure though, is it ok to "erase" in the System clean up?
I decided that I should, create a System Recovery DVD for my new computer. However when I try and do it I only get the option to create a recovery USB Drive.
I did that but I'd still like to make a DVD disk.
Ps. I see that my system recovery USB drive has an empty folder called Sources. If I was to place a backup of my C: drive in that folder would it be automatically accessible and usable from the DVD drive?
Hmmm, I can't seem to find a way to use Windows to create a backup of my C: drive either.
I have been trying to a system image (Windows 8) and keeps telling me to insert a blank disk and mark it, Computer Name, Date and Disk #. It keeps telling me to install one and mark it #1 every time the current disk (DVD) is full, also the status bar does not show any advancement in the process. The other 2 machines I have and did a system image on asks you to insert a disk with the numbers going in sequence, 1, 2, 3 etc.
View 9 Replies View Related