Dumb question - if I panic and have to do a system restore or system reset using the install DVD for Windows 8 what will happen to the Windows 8.1 version I just downloaded and installed?
View 9 Replies
I tried to put my computer in safe mode through system configuration and when I rebooted the computer will not start. It simply does nothing, I hear the HD start to work and the light flashes but nothing, it doesn't show anything on the monitor. I do not have a system restore disk either.
View 5 Replies View RelatedI have two hard disks, and I have a system image that I made of the OS, it is stored on the second disk, the one without the OS. Both disks have sharing turned off.
What happens if I can't boot into Windows, and I want to use EaseUS backup to restore my system? Will I be able to access the system image, if I boot from the EaseUS live CD? Or will I be denied access, because it is not a shared disk?
And generally speaking, is it advisable to have sharing turned off, or on? I am not on a network, but I have several user accounts on the same OS. What security settings are good for my situation.
Okay, experience is the best tutor. I booted from the CD to see what would happen, and yes, it can read the system image file off of the hard disk. But I would still like to know what are the security settings for sharing etc.
is it possible to manipulate windows setup to install on a ReFS system disk ?
I get during setup an warning that windows only can be installed on a NTFS file system !!
Installing windows enterprise 8.1 with update ...
I installed the latest version (3.0.0.9015) of Secunia software to my new Win 8.1 desktop. The PSI Setup looked OK.
I got a screen at the end that said: PSI has been installed on your computer. Click Finish to Close Setup.
While I was reading this message and it was still on the screen I immediately had a message pop-up from "System Restore" that said: System Restore completed successfully. System has been restored to 11/11/2013 4:35:46 PM. Your documents have not been affected. <Close>
I wasn't anywhere near the Restore screen. I had just turned on the machine, searched to see if Secunia was available for 8.1 (since I used it on my Win 7 machine), and started the download. The download was successful and I was able to run a scan....but this whole System Restore completion screen has freaked me out.
I realize I should have manually set a restore point before loading new software
When I look at my current possibilities for doing a restore, I can select from 11/23 or 11/30 - both auto set (so why 11/11?. I'd assume there should also be one for 12/7 since they are being set weekly, but it's not there. Nor are any other restore points, though I really had been setting them quite frequently as I was "configuring" this new machine.
The allocation is set at 30. Is this typically sufficient for a set-it-up-and-leave-it-alone user?
Automatic Restore Points is not working in System Restore. Task Scheduler is empty during last 30 days.
View 9 Replies View RelatedSo this is what happened:
I was using ccleaner to uninstall some software that I thought I didn't need. Apparently, I accidentally uninstalled one of the system files I believe. Now, when I rebooted it, there is no taskbar (just blue and the place where you have a clock is white and blank) and the desktop has no apps in it. Also, when I use alt+tab, the format looks entirely different. I remember the file I uninstalled was around 20 mbs. Afterwards, I tried using a system restore.
I have bitdefender, and as a result, it caused the system restore to fail. I decided to temporarily uninstall bitdefender (planning to uninstall it again later). However, when I tried to do system restore again, the icon had disappeared! (It says that there is no restore point) How do I redo the system restore?
Win8 Control Panel Empty-My Docs-Library problem
A system restore did not work. PC "refresh" did not work. I've done a number of checks/scans (CHKDSK/ ScanDisk , sfc /scannow, Windows Defender, TDSSKILLER, and Malwarebytes Anti-Rootkit) without any threats/errors occurring (I know it's not an exhaustive list.). I'm at my wits' end.
Simply, I understand that "reset" (Reset Windows 8) supposedly (and I'll get to why I say that) removes everything and reinstalls.
Assuming this is a copy of the Windows 8 that was originally activated the first day I used my computer, I should be by the above definition be able to go back and rebuild what had been a system without this problem for about five months (length of time since purchased, approx.). I also have burned recovery DVDs from the first day of use.
There must have been a reason that "Refresh" didn't work. Is this Reset as good as the old reinstallation from discs that I'd done, for example, on XP in the past? Do I need to wipe everything or can I just do the quick (just remove files, not fully clean) reset?
I can't imagine anything outside of the OS causing my situation. Is there any way with "Reset" (assuming not an OS issue alone) that the problem can migrate to the new "installation?" I've never updated the BIOS or any such thing.
i have windows 8 when trying to use system restore it gets to the screen that says system restore is restoring files, but that's as far as it gets, I let it run today for 4 hrs. what can i do?
View 3 Replies View RelatedI was able to do it in XP. I created a shortcut to system restore and put it on the Start Menu. So much easier than the way Windows 8 works. Wondering if there's a way to do the same in 8.1?
View 9 Replies View Relatedtried to do system restore and got this message (see attached) I then did an error check on C drive and I got this message.(see attached)
View 4 Replies View RelatedI've been running Windows 8 since 10/27 and just noticed there were no System Restore points. Doesn't Windows 8 automatically create them when a significant event occurs, like Windows Update?
I created one manually but would like to see Win 8 create them.
But I still cant restore to a chosen Restore Point.
View 4 Replies View Relateduse of System Restore to return to Windows 8 after the upgrade to Windows 8.1 Preview?
View 1 Replies View RelatedThis is the message I get when I try and open system restore.
At the same time o0ther serious problems have arisen:
In control panel>programs and features all programs except those named Mi-Mo have disappeared. Some installed since are there, and those in the quick launch menu still work. Most are also missing from the start menu.
Al;so on start up I get a small window saying explorer.exe with a yellow exclamation mark and nothing else.
I have windows 8.1 and cannot find system restore.The last windows update has changed some things on my computer and I would like to go back to an earlier date.I search for the restore,but only get my bookmarks file.The update has changed my zip files icon to a sheet of paper that I cannot open or extract. There is a system restore. I should add I have the classic shell not the original windows 8
View 4 Replies View Relatedso after I did windows updates after a long time (it's for a good reason that I am not updating) the notebook failed to start correctly. After the windows loading screen, only different tones of black were flashing - probably bad graphics driver. Anyway, I managed to do a system restore. Although it said it wasn't successful, it works But now some programs won't start. From Adobe, AfterEffects starts without problems, but Photoshop and Illustrator has an error: [URL]
When I try to uninstall Office completely, the set-up window doesn't even come up. And what's worse... when I run a new installation from a disk, there's an error too. [URL]
I've never come across something like this.. I don't know what to do.
Edit: So I managed to uninstall Office through a 3rd party software.. but I still have trouble installing it back (a different error now). I run as administrator and have full user rights on the folder..
I'd do a system restore point to get over a problem - there aren't any!
Shouldn't windows automatically make them?
I've had this problem for a year with windows 8 (now 8.1) and I think I even had it with 7. Before that it never seemed to be a problem.
I want to use System Restore because every time I right click in file explorer or on my desktop, they crash (but I'm still able to run other programs normally). But when I try to start it, nothing happens. In the task manager, under background processes, it lists System Restore as many times as I've clicked on it! My anti-virus software isn't reacting to anything, though.
I really need to make a system image before I send my laptop in to get a hardware problem fixed, but I don't want to carry this over in the system image once the hardwares fixed...
I can't seem to figure out WHERE W8 stores the System Restore Points that I create so I created a 500GB Partition on an External HDD that I would like to use to save System Restore files and my question is WHERE in W8 can I CHANGE the location for System Restore?
View 9 Replies View RelatedI have never managed to get System Restore to work on Windows 8 or Windows 8.1 and always have to fall back to a backup.
I get a message indicating error code 0x80070005 and suggesting I turn off my anti-virus.
I have tried turning off my AV before running the restore but to no avail, and since the AV starts automatically I'm not quite sure how turning it off before the restore would work.
I recently tried a restore from the latest recovery point and got error code 0x80070006.
How do I access the System Restore function for W8?
View 2 Replies View RelatedI installed 8.0 with the factory disk and for awhile the option to "refresh your pc" worked perfectly. However after the 8.1 update, I get a message stating to insert the 8.1 disk and it won't work with my regular 8.0 disk. I don't have an 8.1 disk. Is there a way to download an iso and use that to refresh the pc then use the original 8.0 key? I usually try to restore every 6 months because it's a habit I have had since 7. Usually my windows works fine but I run low on SSD space and it's easier to erase and restart everytime.
View 3 Replies View RelatedEverytime I disable the system restore it enables itself a day or so later. It's incredibly frustrating it does this with both PC's.
View 1 Replies View RelatedI want to try the 8.1 update on my XPS 15, but I'm not sure if everything will work flawlessly.
Just in case something goes wrong, I want to switch back to 8.
So, is it possible to "downgrade" using a system restore point (from Windows 8)?
Reloaded my computer and downloaded apps...and 2 times I received a different redirect virus and the first thing it does is turn off the system restore and wipe out any restore points. Then, I am screwed...
I always uncheck all the extra stuff like toolbars apps like to get you to download. The last app that did this was the weather channel app.
My question is, how can I configure system restore to require a password to disable it which a virus may not look for? Or anything to keep system restore intact ?
It is too easy for these virus' to keep folks from restoring.
After my computer started acting screwy, the OS asked if I'd like to restore my computer to a previous state. It said I would lose my apps but keep my personal files. I went along with it, thus making a huge mistake.
I had many many project files saved in my Program Files (x86) folder that I didn't think I'd lose, but now I can't find them. I discovered Windows.old but it doesn't contain any Program Files folders.
Is there any possible way to get those files back?
I recently put together this computer from parts piece by piece. Unfortunately all these problems started on a particularly large upgrade including new motherboard, processor, heatsink, ram and gpu. So I'm not sure exactly what is causing this problem. Sometimes when I start up I get a BSOD, often a random cause, I've never seen any consistency. And that can cause up to 3-4 BSOD's in a row on boot up until eventually a system repair is attempted, which has to perform a system restore. After the system restore I get another one or two crashes before I am able to keep my computer on. Then a couple of days later, I might suffer the same bizarre chain again.
View 7 Replies View RelatedI have a .dll which I use to Show sort headings in all views (Win 8, File Explorer)?
I recently had to reset my Internet Explorer settings to remove Conduit Search hijacker. This stopped explorer7fixes.dll from working in File Explorer, because it was loaded into IE as an 'addon'. Now I cannot get it to work no matter how much I unregister and re-register the Explorer7Fixes.1.0.0.2 version of the .dll, and this is even after restarting explorer.exe/restarting/shutting down.
System Restore fixed this problem for me the last time it happened (I restored back to a time when explorer7fixes.dll was working), but it appears that won't work this time as my restore points are corrupted. Gives the error code (0x81000201)
This button is not working. The window doesnt hang. There is no error message. It just doesnt say anything. I am trying to install Visual Studio 2013. It needs to create a system restore point before starting installation. Needless to say, it fails too. I am on Windows 8.1. I ran sfc /scannow with no results.
View 3 Replies View RelatedI made a system image from Windows 8.1 using Windows' own system image feature. I seem to be unable to restore it. I booted with the Windows 8 disc, and told it to restore from a system image. It found the image, ran a few minutes, then failed because of version mismatch (?). Not before hosing the entire system, by the way. Luckily, I was well backed up.
I booted with the Windows 7 disc, and it didn't even see the system image (on my external HD). It saw my Windows 7 system image and restored it just fine, and here I am.
Anyway, is there some trick to restoring a Windows 8.1 system image? I am not running Windows 8.1, so I can't generate a repair disk that way. Is there one available online somewhere for download?
