Registry Corrupt - How To Repair Win 8 From Boot
Sep 15, 2014
I have messed up my computer I need to work on! Basically, I had a freeven pro virus which I have identified by some malware software and I have deleted the registry folders where my several viruses were located. In the process I also I disabled the SYSTEM to control my account (task manager?).
The effect is that the computer at start up shows weird signs instead of English (so I can't even identify troubleshoot- but by now I've tested all options anyways and there is no reaction) but also doesn't want to log in.
The windows key is on the system of the computer (how smart) and I have no access to original cd as im away. Can I automatically repair it somehow from boot or how do i put a windows on usb to repair the computer from it?
View 9 Replies
ADVERTISEMENT
Jul 7, 2013
I recently re-installed Windows 8 Pro, 64bit after having some difficulties with drivers. I thought I would start afresh. The installation went smoothly but now I cannot play any type of file with WMP 12 and the Video App in Metro, this may be linked to multiple SFC scans that I have run, all of which report that some repairs have been made and some files were corrupt and could not be fixed.
The Video App crashes with this error message (in event viewer):
Faulting application name: wwahost.exe, version: 6.2.9200.16420, time stamp: 0x505a9152
Faulting module name: ntdll.dll, version: 6.2.9200.16579, time stamp: 0x51637f77
Exception code: 0xc0000374
Fault offset: 0x00000000000ebd59
Faulting process ID: 0xf2c
[code]....
View 9 Replies
View Related
Sep 15, 2014
I ran SFC and it complained that some corrupt files could not be repaired.
Here's the relevant part of the log:
Code:
2014-09-17 00:06:45, Info
CSI 00000520 [SR] Verifying 100 (0x0000000000000064) components2014-09-17 00:06:45, Info
CSI 00000521 [SR] Beginning Verify and Repair transaction2014-09-17 00:06:46, Info
CSI 00000522 Hashes for file member
[Code] .......
View 2 Replies
View Related
Aug 20, 2014
My laptop is running ok but I have noticed that certain programs have been taking a lot longer than usual to install/update (e.g. iTunes) but they always do. Then the last few days AVG Antivirus has been wanting to auto-update the software (not just the virus definitions) but each time it would freeze during the ''configuring'' step and subsequently cause every other program running to freeze and stop the opening of any other program - although I could still move the cursor so not a complete freeze if that makes sense.
So today I removed AVG with the removal tool and tried to do a fresh install but now I get a failure message immediately telling me ''MSI Engine: failed to initialize the package''.
How to go about fixing this and ran system file check which said corrupt files were found but it was unable to repair some of them. Here is the log:
Originally Posted by CBS.log 2014-08-20 14:24:13, Info
CBS TI: --- Initializing Trusted Installer ---2014-08-20 14:24:13, Info
CBS TI: Last boot time: 2014-08-20 13:56:23.498
2014-08-20 14:24:13, Info CBS Starting TrustedInstaller initialization.
[Code] .....
How to read one of these or even if it effectively evaluates the status of the installer.
View 6 Replies
View Related
Jan 21, 2014
How create a repair rescue disk Windows 8 to restore Registry ONLY?
''Have a new HP Envy 15t-J100. Has a Recovery Partition. I created a Boot USB stick. Fine
I recall with other Windows versions & and such you could create a repair/rescue CD that basically allowed you to restore your settings to an earlier Registry Restore Point.
Will the Recovery Manager (on USB) do this as well?
View 5 Replies
View Related
Jun 23, 2014
My pc froze when I was browsing the web. It gave a blue screen with a sad face emoticon saying it had encountered a problem and needed to restart.
Upon restarting it tried to repair / restore but crashed again and restarted again. I have tried booting to a USB loaded Windows 8.1 pro setup. The Win 8 "setup fish" appears however it doesn't actually enter setup. After a moment the "setup fish" disappears and the screen goes black for a moment then a message is displayed on a blue screen saying File:windowssystem32ootwinload.exe could not be loaded. I wondered if this means it is still trying to boot the OS so i disabled the hard drives in bios just leaving USB but Windows 8 setup still won't boot and I still get the same error message.
My motherboard is an ASUS p7p55d. At the moment I am just using my phone to write this.
View 3 Replies
View Related
Jul 19, 2013
Just reinstalled windows 8, loaded everything up and had it perfect. Then I installed a windows update (could it have been 8.1?) and then my computer would not boot. It got stuck on the windows 8 logo with the circle just spinning. After I restart it tries to automatically repair but that doesn't work. I popped the Windows 8 disc in and tried to do a system restore using a restore point but it said "You need to select an OS. Please restart the system and select an OS". ??? I'm not dual booting! Windows 8 is the only OS installed!
Tried safe mode but the windows logo just hangs. Any possibilities to salvage this before doing yet ANOTHER reinstall or refresh or whatever.
View 9 Replies
View Related
Apr 8, 2013
My pc is a hp pavilion 64 bit desktop computer model # P6- 2220t it is 5 months old. It originally came with windows 7 then I upgraded to windows 8. I went ahead and used windows 8 to create an image of my hard disc and store it on a usb external hard drive I also made a repair disc.
Everything went well the pc backed up on scheduled and doing well in backing up. My big problem is this I tried to boot from the repair disc but it won't I looked at the bios but it is different from the type of bios that I am familiar.
View 1 Replies
View Related
Aug 22, 2013
It is a Toshiba satellite L675 and the stickers indicate it is a windows 7 model. However, when I open the machine and turn it on, I am welcomed by the windows eight logo. Past this, I get an endless wait time. It alternates from no message to preparing automatic repairs from boot to boot. I have tried to go into its preperscibed setup mode (f2 at startup) and the boot menu (f12 at startup) neither of these have taken me to a bios or any other interface. I have tried ctrl+f8 and have gotten no success. I have also tried every function key and ctrl plus every function key individually.
View 4 Replies
View Related
Jan 2, 2014
I had my system set up for Dual boot (on separate hard drives) for both Win 8.1 and Win 7. Win 8.1 developed a problem and unfortunately the only back up I had (my fault) was for Win 8 before I installed Win 7 and the dual boot.
I reinstalled from the backup and then updated Win 8 to 8.1. Both the Win 8.1 64 bit and the Win 7 64 bit work OK but the dual boot is now missing in Win 8.1.
Is there any way of repairing/creating the dual boot, either in Win 7 or Win 8, without using BCD Edit?
View 5 Replies
View Related
Mar 17, 2014
Some Three Months ago, I updated online my WIN 8 Pro OS to WIN 8.1,Since when it has run without any problems, but Unfortunately this morning,when I switched on my PC, I got the following Messages.
1. Preparing Automatic repair
2. Diagnosing Your PC
3. Automatic Repair
4. Your PC did not start correctly - Pressed restart button
5. Repeat of 1, 2, 3
6. Pressed Advance Options button
7. Pressed Continue button
8. Repeat of 1,2, 3
9. Pressed Troubleshoot button
10. Pressed Refresh your PC
11. There is a problem with refreshing your PC
12. Pressed Start Up Repair
13. Start Up repair couldn't repair PC
14. See D:windows system32logfilesmtsattrail.txt
15. Tried System restore but got a message saying No System restores available
16. Selected option for booting from my old WIN 7 Disk
After a short wait my WIN 7 OS booted up successfully and I was able to see the WIN 8.1 OS Disc . I ran my Kaspersky AV on it which came up 'clear', I then ran the OS Disc test which also came up with no errors. Also I Cannot find the log message referred to in 14
Unfortunately I only have my WIN 8 CD, and WIN 8 System Repair disk, which will not work with my current Windows 8.1 installation. I can get into my BIOS by pressing the "del" key on boot, but cannot get into the F8 menu for Safe Mode options.
View 5 Replies
View Related
Apr 8, 2014
So system was running perfectly (custom pc, win 8, samsung pro ssd), just did a clean install, fresh drivers, etc. It was running great! ASUS Sabertooth p67 mobo, latest bios.
Then out of the blue, mid game, i get a hard lock up stall. no blue screen but just lock up. shut down and when i reboot, bios didn't find my samsung ssd. unplugged my 2nd sata drive, booted again and now it found the samsung ssd however i got the "no disk found press ctl alt delete"
At this point i ran windows recovery console and did the bootrec fixboot, fixmbr, rebuildbcd, chkdsk party. everything said it was completed successfully.
Now when i boot however i am stuck in an auto repair loop and can never boot into windows 8.
I am thinking the crash is somewhat power supply and/or mobo related. new power supply is on the way and mobo being RMA'ed.
View 1 Replies
View Related
Jan 11, 2014
I recently upgraded to 8.1 (mistake) and have been having issues with my harddrive. Just today, I restarted my computer only to get a "windows failed to start" message. I went into the recovery options, and attemped a system restore (didnt work), system refresh (recovery media wasn't present), and CMD commands (chkdsk) and even sfc /scannow which I can't seem to get to run, I always get the "Will start on next boot" message, which it never does. So I attempted using an ISO with the windows 8.1 professional. Tried everything I did above, and still nothing. Refresh fails with the CD, and when i try to install a new partition, it only gives me the option of upgrading (which i cant) or reinstalling everything deleting anything in the process. I don't understand why I can't install on a new partition like I did with Windows 7.
View 5 Replies
View Related
Jan 5, 2014
I have this identical problem mentioned here : Scanning and repairing volume (?Volume...) on startup
I think it has something to do with my deleting the 'system reserved' 350mb partition when I reinstalled Windows 8. I don't want it showing in My Computer and when I go into Disk Management and give it a drive letter, this message goes away on boot. But, since I can't merge this very small partition with any other drive, I'm not sure how to not show this drive and not get the scanning message on boot up.
View 9 Replies
View Related
Apr 24, 2014
I was playing WOW the other night on my month old PC and all of a sudden I got a full red screen. I restarted the comp and this auto repair screen popped up and it freezes and just same thing over and over. the bottom of the screen is cut off and the only other window i can get into is the bios setup utility window. Cant get into any kind of safe mode nothing.
my computer is an Gateway SX2370-UR12
View 1 Replies
View Related
Sep 2, 2014
[URL]
Computer was running slow so I did a reset of windows. It worked but the problem still existed. My computer froze so I turned my laptop off and back on only to find it stuck in that automatic repair loop. I tried system restore, no luck. I made that bootable usb for repairing and that didn't work either. Straight repair won't work either. I have tried every option and am completely lost as to how to proceed. I need the files off the hard drive but don't have a way to connect it to anything to be able to access the files.
View 11 Replies
View Related
Feb 8, 2013
I had a problem where I was running UEFI with secure boot disabled and dual booting with Linux Mint which is UEFI compliant. Mint had installed Grub, Mint's boot manager but I don't like Grub so i installed rEFInd. Unlike Grub rEFInd has support for UEFI and should have worked better as a boot manager. But it gave me problems too. So I had Grub and rEFInd both installed. I could boot to both Mint and Windows but the boot managers, both Grub or rEFInd, would not show at startup like they are supposed to.
I had to boot the PC, then hit Escape getting into my options menu built into the system, hit F9 to get a list of boot options where i could then choose to boot from hard drive, cd rom, usb etc. rEFInd was in this list. Only after choosing rEFInd from here, was I able to open rEFInd and choose Windows or Mint. This is way too many steps to boot into an OS, so i thought i'd try to use the system repair disk to repair my master boot record or the EFI data that the system uses at boot under UEFI. I forgot that i had to run some additional commands under command prompt and just ran automatic repair from Advanced instead.
At this time Windows had no trouble working at all with secure boot enabled if I really needed windows to use secure boot.
It said it found but could not fix the errors. Suddenly, Windows would not boot even with secure boot enabled. I reran the tool 3 times and it didn't work so i wiped the drive and reinstalled Windows from a clean state. I really did not have errors on the system to begin with accept that the system was trying to access my boot managers in an odd manner.. although i could get everything to work.
The automatic repair option should not have made things worse, even breaking my secure boot but it did.
My point of this is to show that the repair disk tools and how they play with the EFI boot tools is buggy and it can break your system even if there is nothing wrong with Windows and it's ability to boot under secure boot. Don't trust the Repair Disk tool folks. Don't trust UEFI. Don't trust Secure Boot. Be smart. Install a clean system under Legacy Bios mode with UEFI and secure boot disabled.
View 3 Replies
View Related
Jan 23, 2013
I have a Windows 7 / Windows 8 dual boot setup that was initially working fine. When attempting to update the graphics drivers in Windows 8 last week, something went wrong and the system crashed. Now when I attempt to boot into Windows 8, it goes into the Attempting Automated Repairs loop which never finishes, even when left running for several hours. I attempted to boot off of the Windows 8 installation CD and do a Refresh but it just errors out saying Windows could not be refreshed.
View 4 Replies
View Related
Feb 7, 2014
Since upgrading to windows 8/8.1 x64 i have twice had this situation when during boot up windows tries automatic repair & fails , every time i restart same repair fail happens , its stuck in this cycle , neither "Refresh" or "Reset" option works , . I have to do a fresh format & install , loose all my files stored in the OS partition , I even tried to recover the files using linux boot cd but the folders were inaccessible/corrupted .
I tried every solution i could find to make it boot including Unable to refresh or reset PC after Automatic Repair fails in Windows 8 but nothing worked .
This has happened twice in the one year since i have been using Win 8 , Is there any way to avoid this from happening i future ?
View 9 Replies
View Related
Jan 2, 2013
I have a strange behavior when I install virtualbox on my windows8 laptop: Cold boot (windows8 restart) will then fail, whereas shutdown (fast boot enabled) or suspend still work fine.
Laptop is an HP G6 with an SSD installed with 64 bit windows 8. Prior to the virtualbox install all three actions (suspend/shutdown/restart) work fine.
If I install virtualbox (simply installing, not creating any VM), then the next restart will trigger an "automatic repair" screen at boot. Will never terminate. Only way to fix is to escape + F11 and restore a previous restore point. If instead I say shutdown (I have fast boot enabled) or suspend, the system will restart fine at next power on or resume.
View 3 Replies
View Related
Mar 6, 2013
Hey, for like the 8th time now I've had to format my computer due to a blue screen error. The last error was HAL.dll missing or corrupted. My boot sector or whatever the correct name for it is, keeps getting corrupted and it will never repair, it just freezes at 2% and keeps looping. The drive I am using is the Corsair 240GB FORCE 3 SSD and I am not sure if the problem is due to SSD being bad or my motherboard being too old. I have the ASUS Striker II Extreme...
My second problem is, on my latest format, Windows 8 refuses to activate, it claims I cannot do a clean install and this is what I have been doing all the time. The other thing is that I cannot complete a Windows update, when it restarts, it says it has failed and rolls back the changes. I am not sure if this is because it wont activate but.
Now Windows has a problem with showing my real location, so I am getting the wrong weather reports and so on. One more thing I forgot to mention, I can't even check my system rating. Last time I did I check before the format my system was rated as 6.6, that was my lowest rated hardware and that was the SSD. Is that a normal score for an SSD?
View 8 Replies
View Related
Sep 15, 2014
Acer Aspire V5 is the PC I am using. I turn it on, the boot fails and the pc restarts. Then begins an automatic repair, which crashes and the PC turns off. It is a loop I cannot get out of. I don't have a Windows 8 Disc or anything like that.
View 2 Replies
View Related
Feb 10, 2013
I have Windows 8 64 bit Pro Edition working fine using UEFI boot from a SSD disk. I've twice created a system repair disk on DVD but when I use boot override in the BIOS to boot from the DVD, I get the message "Non-system disk....
View 9 Replies
View Related
Oct 9, 2012
I have a PC that I have been running Win 8 Consumer Preview since it was available. I have two HD's partitioned to dual boot Windows XP SP3 and Win 8, with Win 8 set as default. I have been running Win 8 over 95% of the time. Everything has been working fine until this morning.
When I came out of screensaver in Win 8 and attempted to get to my login page nothing happened. So i shut down using the power button, after that Win 8 would not start, nor could I get to the dual boot screen. After a number of tries i finally got the dual boot screen and attempted to start in XP. XP nearly completely started (I had desktop, task bar, desktop icons, etc), but then it shut down as well and displayed a blue screen and error message "A problem has been detected and windows has been shut down to prevent damage to your computer.".
I have tried starting from my XP install disk with the same error message ("A problem has been detected and windows has been shut down to prevent damage to your computer." ). I have tried starting from USB flash drive that has my Win 8 Install. It is the same USB flash drive that i originally used to install Win 8. It hangs at the 'fish' screen. I have tried just starting the machine several times, but it hangs at 'Preparing Automatic Repair'.
I have everything disconnected (printers. ethernet, USB Wifi adaptor). The only things connected are my keyboard/mouse, speakers, and (1) 17" monitor. I normally run a 23" widescreen and the 17" monitor.
I have disconnected the slave HD and tried booting with XP install disk and USB Win 8 with no success.
Currently, both HD's are connected. I tried a normal start up and the machine is stuck at 'Preparing Automatic Repair'
This has never happened before such that I could not boot into either XP or the XP Install CD or the Win 8 USB Install flash drive, in order to attempt repairs to MBR or Win 8 troubleshooting diagnostics.
Complete error message on Blue screen:
"A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSk /F to check for hard drive corruption, and then restart your computer.
Technical Information:
*** STOP: 0x00000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)"
View 1 Replies
View Related
Dec 26, 2013
On my friend's Dell Inspiron laptop, Windows 8 will not boot. I want to boot to the repair disk to restore an image I had created. F12 on boot does not show the DVD drive as an option. I went into Setup/Boot and disabled Secure Boot, still did not show the DVD as a boot option. I went back to Setup and selected Boot List Option>Legacy. Now it shows the DVD drive as an option to boot. I booted the repair dis, went through all the dialogs to select the image I had created, but when it goes to restore it it says it cannot because the image was made in UEFI, and it is now set for BIOS.
I went back into Setup/Boot and I see that the option Load Legacy Option ROM is now Enabled, it did it on its own. As a test I set it back to the defaults and re did it as above, and again it automatically changes Load Legacy Option ROM, which I assume is what is creating the problem.
So my question is what do I need to do to boot from the Windows Repair Disk?
View 9 Replies
View Related
Feb 15, 2014
I have a Toshiba Laptop Satellite L875D-S7332 Part No. PSKFQU-008003 With Windows 8 x64 Preinstalled. I created a Startup Repair Disk with a DVD. My problem is i cannot boot from this DVD. I changed the Bios to boot from DVD but it still doesn't work!
View 1 Replies
View Related
Nov 30, 2013
While I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.
View 9 Replies
View Related
Aug 21, 2014
My Toshiba laptop after auto updates is not booting. I used windows 8 backup dvd but still not booting. I tried automatic repair using the dvd but it failed. How to set it right without loss of data on the laptop?
View 2 Replies
View Related
May 10, 2013
Ok, So, I started up my laptop this morning and the screen was all wonky, It was light blue and there were swiggly white bits, I waited a bit and then restarted it.
The Auto Repair started up when the computer started back up so I left it alone for a bit
"Automatic Repair couldn't repair your PC"
I was like Ok, I checked the logfiles "Boot critical file c:/ci.dll is corrupt"
It won't let me refresh or restore my computer.
Forgot to say, If I restart it just loops back to the auto repair.
View 2 Replies
View Related
May 29, 2014
After recently installing stardock suite with icon manager, i decided to uninstall the program and go back to just using rainmeter. After doing so, it seems like all my icons (programs and windows defaults) are one icon and corrupt.
Ive already done the following:
installed icon manager and restored windows defaults with no luck
rebuilt windows icon cache and thumb cache with no luck
restarted explorer.exe
This is frustrating to say the least and i really dont know why these methods dont work..
using windows 8.1 x64
View 5 Replies
View Related
Jan 7, 2013
I recently received a restore usb for windows 8 from dell and had some trouble.
When I tried to repair the operating system with the usb restore, this it what happened.
I was given the following options- off the USB restore
1-refresh
2- system restore
3- repair
4- Re-install windows 8
After trying to 1-3 first to repair the OS, all denied being able to fix.Sometimes I would get these messages-
1-Volume Locked.
2-A required drive partition is missing.
3- windowssystem32winload.efi is missing or corrupt.
After I re-installed windows 8, I see the following partitions.
1- c: re-install windows 8 - 404gig of 418gig(currently done)
2- d: corrupt windows 8 , but all the system files are still there 45 gig of which 38 gig is used by the previous corrupt OS ( but all the files are still there).
My question is , is there any way to fix or restore the corrupt previous OS ?
The reason I want try restore previous OS is because I had activated windows , had all the dell drivers installed and had the antivirus, installed.should I try to rename C:- D and D:- C to see what happens ?
View 4 Replies
View Related
