HP Envy - Cannot Create Systems Repair Disk Only Recovery USB
Jan 20, 2014
I have an HP Envy with a recovery partition. I did indeed create a dedicated USB drive that copied the recovery partition from the partition on the hard drive that shipped with the unit.
I wanted to create a restore registry type of system repair disk as you could in Windows 7. However even though I read that the option should appear in the Recovery Options that says: Create a Systems Repair Disk with a CD or DVD (see System Repair Disc - Create in Windows 8), that option never appears.
While I do have Acronis as a backup I would like a quick bootable CD/DVD that offers a registry restore option. But perhaps that is what the recovery partition is for and when the time comes it will offer me that option, not sure (????).
Or may be there is a separate .iso I can downlaod and burn like I did for Win 7 32 bit and 64 bit.
How create a repair rescue disk Windows 8 to restore Registry ONLY?
''Have a new HP Envy 15t-J100. Has a Recovery Partition. I created a Boot USB stick. Fine
I recall with other Windows versions & and such you could create a repair/rescue CD that basically allowed you to restore your settings to an earlier Registry Restore Point.
Will the Recovery Manager (on USB) do this as well?
I decided that I should, create a System Recovery DVD for my new computer. However when I try and do it I only get the option to create a recovery USB Drive.
I did that but I'd still like to make a DVD disk.
Ps. I see that my system recovery USB drive has an empty folder called Sources. If I was to place a backup of my C: drive in that folder would it be automatically accessible and usable from the DVD drive?
Hmmm, I can't seem to find a way to use Windows to create a backup of my C: drive either.
I have done the partition of HDD of my new Dell inspiron 7520 laptop and now I am not able to create a System Recovery disk nor in USB drive. System keeps on reading the disk or Drive.
Brand new laptop. HP. 17e UEFI +GPT etc. Upgraded to 8.1 from 8, first thing. Then clicked on the MS, create recovery. (in blind hope of a clean 8.1 restore). Inserted (32gb stick) (later found out is illegal windows 8 version, that is not removable.) SD-extreme, 32gb. list on toms HW, as winner of all, (and is useless for this app).
So I pull out my very old SD cruiser glide, 32gb (old , slow and not win 8 cert (a good thing). Yes all 32gb extremes are mapped as HDD not removable media and is doomed. (known on all forums) but same error.
The cruiser shows up i device manager under removable media....btw i want to find out why the missing files error. I have a HDD and SSD, with latter mirrored. both the orig, HDD fails and SSD fails. same way. I parked the HDD , and run only SSD. but both fail... (my guess is , upgrades 8.0 to windows 8.1 is cause).
now the screen, attached
How can i find the log of these errors, it's not in event viewer.. oddly. sfc/ scannow works. as does chkdsk, and restore (create) works,. and system is Fast a lightning. All HP apps works, cept there version of create disk for same reasons.
My HP create recovery now works on the GLIDE. (old very old 32gb stick i had laying about). So now I am thinking HP? blocks the MS create so you will use theirs? But I'd lilke to know this, what files are missing....
I pay a used laptop Sony Vaio SVF 143100c from china , they install windows 8 Enterbrise and no other software or drivers
when I check I found a recovery volume on the hard disk I assign this volume and copy all the recovery content to external Hard disk, size is 18 GB
and the product key is valid for Win 8 RTM CoreCountrySpecific OEMM,
I don't have a Recovery Media disk or usb to return to Factory condition, how to create a recovery disk to access tis image and re install tis laptop to Factory condition
I am trying to create recovery discs from "Dell backup and Recovery application" however when i was asked to insert the second DVD,the optical drive keeps rejecting the DVD. The application will not continue to burn the second DVD and appears to be frozen. I tried with different brands/makers of DVD and also -/+ R. Unfortunately .Issue remains. I was able to find this article 593906 Published on 2013-01-21 ( relative link [URL]... ).
Although i have done the updates ,i am still not able to create recovery discs !! Current Issue: after inserting the 3rd Disc application gives the following message "Dbr.exe -No disc found" and stays there and rejects the DVD. I spoke with Dell's Greek Support team. I was told that warranty does not cover sw support even if my unit is less than a week old. Furthermore i was informed that although "Dell backup and recovery" application says DELL is not actually a Dell product thus they can't support it. They suggested my to use windows 7 file recovery instead (which needs at least 8 DVDs !).
I am trying to create a system repair disc, and I am getting the message: "do not have the files to create system repair disc". Why? How do I get those files. Never had a problem like this trying to create a system back up in the past. Running Windows 8.
My hard disk crashed. I have a recovery cd created on the time of purchase. I bought a new hard disk for this purpose. Now when I am trying to recover from the same cd it is getting stuck at 40 % showing error. I searched for this error and got something as such recovery disk can work on OEM hd. As my old hd has crashed how can I recover over there. Is there any system that dell provide me with necessary operating system so that atleast I can use my system.
Today my beloved Win 8.1 gave me a surprising license deactivation, meaning the license just suddenly became void despite working properly for some few months. I suspect two reasons:
- I changed GPU the day before (but it's not like the problem occurred right after changing GPU) - during system boot right before occurrence of the issue Windows was performing (routine?) HDD autorepair. This could suggest that some system files were damaged in the process. My only drive is an OCZ Vector SSD.
Obviously, my license is genuine.
I did try slui.exe 4 - nothing loads after selecting region. The loading icon just keeps running. I also tried sfc /scannow. It said some files were corrupted which could not be repaired. I'm attaching the log file. I also tried performing autorepair from Windows CD - to no avail. I also ran the MGADiag I found somewhere, but this version seems incompatible with 8.1, as it says "Validation unsupported OS".
I don't even know if buying a new license key (which I obviously would like to avoid) would work for me. An activation suddenly disappearing is just so... windows...
Recently was running a backup program and suddenly I get the Windows 8 blue error screen (the one with the mocking '' icon) and system dies. I turn on and it seems to booting very slowly then it proceeds to do the pre login screen installation of updates. After half an hour or so and with updates on around 70%, system dies again. Now when I turn the machine on it appears to alternate between either hanging for ever on the Windows 8 loading screen or attempting to run an 'Automatic Repair' which invariably results in a blank screen and no fix.
Having read several 'Automatic Repair loop' posts on the net, it appears I need to load the recovery disc and run repair or restore programs from there. Of course the CD I made failed (crappy disc?) so I had to search my original licence email and use the provided link to download and create a new installation disc from a working machine. This disc loads and gives me the option to install Win 8 (presumably a fresh install with loss of files) or a troubleshoot menu. Running the automatic repair option results in a rather inane 'Couldn't do it' message and gives a blank path to a log file. The system restore option prompts me to 'Restart and select operating system before trying this' and i'm not sure how to do this as no such option is given at boot.
Computer was running slow so I did a reset of windows. It worked but the problem still existed. My computer froze so I turned my laptop off and back on only to find it stuck in that automatic repair loop. I tried system restore, no luck. I made that bootable usb for repairing and that didn't work either. Straight repair won't work either. I have tried every option and am completely lost as to how to proceed. I need the files off the hard drive but don't have a way to connect it to anything to be able to access the files.
My Gateway machine was performing a windows update when the neighbourhood power went out. It was off for four hours. When I went to turn the computer back on, it said automatic repair the diagnosing your pc.....that lasted about 5 hours! Then a blue screen with options came up. When I went to pick the advanced options, I clicked accidentally on the first one and it rebooted into the repair loop again. Since it takes so long for the diagnostic part, when the blue screen came up again it was likely the middle of the night.
I saw it at 7:00 am and tried to click the advanced options but the computer had gone to sleep by then and so once again it got rebooted into the loop. Gateway refused to support since the warranty is up. I can't find a Recovery disc image for 8.1 to put on a usb stick, and I'm back to trying to find answers on my 12 year old machine running XP. I tried the boot to safe mode with alt+F10 but can't get that to work either. If I knew how to force a reset to factory defaults without being able to get into windows I would. I've been doing this for 3 days now and I was just starting to like 8.1 too...
so one of my computers entered a boot loop and I'm pretty sure the only way to fix it is using a recovery drive. Only problem is the only other windows 8 PC in the house doesnt let me create it. I go through the steps outlined in this thread: Recovery Drive - Create with USB Flash Drive in Windows 8 but i get stuck on step 6. When I insert a USB drive the create recovery drive setup doesnt seem to recognize it. It just refreshes (which shows that it detects a usb being inserted) but nothing shows up. Oddly enough, I can access the usb drive through my computer and copying/moving etc files still works. How can I make it so it appears?
On my friend's Dell Inspiron laptop, Windows 8 will not boot. I want to boot to the repair disk to restore an image I had created. F12 on boot does not show the DVD drive as an option. I went into Setup/Boot and disabled Secure Boot, still did not show the DVD as a boot option. I went back to Setup and selected Boot List Option>Legacy. Now it shows the DVD drive as an option to boot. I booted the repair dis, went through all the dialogs to select the image I had created, but when it goes to restore it it says it cannot because the image was made in UEFI, and it is now set for BIOS.
I went back into Setup/Boot and I see that the option Load Legacy Option ROM is now Enabled, it did it on its own. As a test I set it back to the defaults and re did it as above, and again it automatically changes Load Legacy Option ROM, which I assume is what is creating the problem.
So my question is what do I need to do to boot from the Windows Repair Disk?
I just bought Asus UX31A-R4005H (with Windows 8). Unfortunately Asus doesn't provide any application to restore Windows 8 back to factory conditions. So i need to recovery whole hard drive partitions back to factory settings.
Firstly i need to create a set of OEM factory recovery discs/usb flash.
1. I'm planning to create a system recovery drive (usb flash) with Windows 8 but i wonder if this usb flash will recover whole hdd back to factory conditions? If yes is it enough to use Windows 8 "create a recovery drive" option?
2. How could i create an original OEM factory recovery usb flash with 3rd party application?
I would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. How I can do this?
When I first got this PC, I made the Recovery DVDs as instructed. Now, I want to make a Recovery Flash Drive, but HP only allows creation of one Recovery item. Is there a way to create a Recovery flash drive after I've already made DVDs?
I have a Toshiba Laptop Satellite L875D-S7332 Part No. PSKFQU-008003 With Windows 8 x64 Preinstalled. I created a Startup Repair Disk with a DVD. My problem is i cannot boot from this DVD. I changed the Bios to boot from DVD but it still doesn't work!
While I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.
I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
I recently bought a Dell Windows 8 desktop. I upgraded the desktop to Windows 8.1. I want to create a recovery drive using a DVD rather than a flash drive. (I understand Microsoft wants you to create recovery onto a flash drive rather than a DVD. Not sure why.)
I found several places on the net which discuss just how create recover onto a DVD. They suggest that I do a search on "Windows 7 file" and this will display an option to click on "Windows 7 File Recovery" ... and that will lead me through the steps to create my recovery onto a DVD.
Problem is "Windows 7 File" is not found. How do I get this onto my Windows 8.1 system?
I finally broke down and bought a modern laptop Asus A55A (K55A) and installed Ubuntu 12.04 in a dual boot situation. With the nefarious secureboot and other such nonsense Windows 8 install met with an untimely demise. However, I have the files left on the recovery partition (copied to my 16gb usb) and need to make an install disk. My only issue is that I can't find a way to do it in Ubuntu as all the tutorials I find assume that Windows is installed. Is there a way to make a bootable Windows 8 install usb or iso from the files on the recovery partition-without using Windows to make it? I would love to re-install Windows 8 and then setup a stale dual boot.
I have read the tutorial (Refresh Windows 8 - Create and Use Custom Recovery Image) . Would I not get the same result if I created a Disk and Partition Backup using a program like Acronis or Easeus? That way I hope to keep all my initial system, personal files and third party applications.
This is for a Samsung NP550P5C... having typed it into Google, the options appear a little confusing with the best option being how to make recovery discs for an HP laptop (presumably using HP's built in wizard), requiring 4 DVD's. Other suggestions seem to tell you how to make a "Repair" disc for Windows 8 with one readers comments of.....
" Windows 8 recovery Disk is used to reset your PC - it is supposed to reload the operating system and restore factory default settings. You need a USB flash drive 16GB or larger. I haven't found yet a way to create Windows 8 recovery CD/DVD, which can be used to reinstall the operating system."
It's not even clear how to do it on a Flash Drive though I would prefer using discs...
