I have read the tutorial (Refresh Windows 8 - Create and Use Custom Recovery Image) . Would I not get the same result if I created a Disk and Partition Backup using a program like Acronis or Easeus? That way I hope to keep all my initial system, personal files and third party applications.
View 5 RepliesIf I create a custom refresh image such as a blank retail windows 8 will it restore my files. I'm trying to go from wim 8.1 pro wmc to pro because it is not activated and I have a pro product key. Is there any way to downgrade without losing files settings etc.
What i mean is can I reinstall windows 8 pro (I currently have media center) without losing eveything?
I created a custom refresh image the day before upgrading to 8.1. I am having shut down and sleep issues with windows 8.1 that I don't have time to troubleshoot any longer and I wish to go back to win 8 for now. I went to check that my image was there and active and this is what i get:
It showed successful when I created it? I can find in in the location that is it supposed to be:
and:
Now I'm stuck. I don't want to use the factory image and reinstall everything, and I can't cope with the bsods and hangs when trying to sleep or shutdown ( I have tried every option in that massive thread about windows 8.1 not sleeping ) ...
I would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. How I can do this?
View 1 Replies View RelatedWhen I entered recimg/show current in elevated cmd , I get the message : There is no active custom recovery image.
However when I checked disk management , I get the following partitions:
EFI System 50mb
OEM 40mb
Recovery Partition 2GB
OS C 50.12Gb
Recovery Partition 5.42Gb
What are in those 2 Recovery Partitions ? Are they the 2 restore points I created? Why is the second Recovery Partition so much larger than the first?
Am using recimg to create custom image on freshly upgraded win 8.1 install. It fails almost immediately with this message appearing in a pop up:
"The procedure entry point ??0BufferedStream@UnBCL@@QEAA@PEAVStream@1@K@Z could not be located in the dynamic link library c:windowssystem32migwizmigcore.dll"
Further info:
Problem signature:
Problem Event Name: APPCRASH
Application Name: recimg.exe
Application Version: 6.3.9600.16412
Application Timestamp: 5243fc60
Fault Module Name: KERNELBASE.dll
[Code] ........
System info :
OS Name Microsoft Windows 8.1
Version 6.3.9600 Build 9600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name TOSHIBA
[Code] .....
I have made a System Image & a Custom Recovery Image on my Asus Vivotab but I cannot get the system to recognize them on a USB Hard Drive.
I got into this by testing the Refresh Custom Recovery Image. The system did not find the image as the system allocated a different drive letter so I have basic Refresh. I have found my way to the Administrator Command but cannot find RECIMG on either the x: or C: drives. Do I need a Path Command from System32?
I also have a System image on a USB Hard Drive but cannot get the system to find it. I have tried putting the files folders in the root directory but the system still does not recognise them.
How Often Do You Create a System Recovery Image?
View 9 Replies View RelatedI've been dual-booting Windows 8 Pro and Windows 7 Ultimate, but a while back my Windows 8 kind of went "South" and wouldn't boot at all (I got an error message that a device was "not attached"). I have a recent system image on an external USB hard drive, but when I boot to "system recovery" using my repair disk it can't seem to find my USB drive at all.
The tutorials here mention installing a SATA driver to access disks that are not recognized, but this doesn't seem to be the case.
How do I create my own global groups (like Administrators & Guests) without a domain (OS Win 8 Pro)
View 5 Replies View RelatedI installed Windows 8 Through my windows DVD and now want to make it so I don't need the Windows Installation Disk or any USB Recovery key. Is there any way to make a refresh AND reset partition and image.
View 7 Replies View RelatedWhile creating custom system image, I accidently registers the custom system image as default image when refreshing Windows 8 instead the OEM one. So, how do I unregister the custom system image and make the OEM system image as the default one?
View 3 Replies View RelatedI am trying to create recovery discs from "Dell backup and Recovery application" however when i was asked to insert the second DVD,the optical drive keeps rejecting the DVD. The application will not continue to burn the second DVD and appears to be frozen. I tried with different brands/makers of DVD and also -/+ R. Unfortunately .Issue remains. I was able to find this article 593906 Published on 2013-01-21 ( relative link [URL]... ).
Although i have done the updates ,i am still not able to create recovery discs !! Current Issue: after inserting the 3rd Disc application gives the following message "Dbr.exe -No disc found" and stays there and rejects the DVD. I spoke with Dell's Greek Support team. I was told that warranty does not cover sw support even if my unit is less than a week old. Furthermore i was informed that although "Dell backup and recovery" application says DELL is not actually a Dell product thus they can't support it. They suggested my to use windows 7 file recovery instead (which needs at least 8 DVDs !).
(Model : inspiron 15 3521) .
I recently did an update of my machine from Windows 8 to Windows 8.1. The update process did not show any errors or warnings and by the time it finished I was under the impression that everything went smooth.
After the update I was testing the environment and discovered that one of my desktop applications stopped working, I went to the developer's website and indeed I found there is a known issue with their software on 8.1 and to solve it, I had to completely uninstall the software and then install it once more. So I went to Programs and Features in order to do so and to my surprise the Uninstall button was missing from the interface. Right-clicking an item and selecting uninstall from the menu gives a warning message suggesting that the application might have already been uninstalled and asks if I wanted to remove the application from the Programs list. However, clicking OK or Cancel just closes the message box and nothing happens.
So I went and tried to Refresh My PC; Once I clicked Refresh My PC the verification process started and indeed it told my that some system files are missing and that it should take care of it provided I insert my Windows disc. Now since its an OTA update from Win 8 to 8.1 I thought that MS knows that some people will not have a physical copy of 8.1 and so I inserted my Windows 8 Pro System Builder disc hoping it would work, but sadly as you might have guessed, it did not. It told me that I needed the 8.1 recovery disc.
Now I have been looking everywhere for a recovery image to download and use to fix my problem, everywhere I go it suggests that I make my own copy. But how am I supposed to do that if my Windows is faulty and has missing files. I really don't wanna go back to Windows 8 and re-upgrade to 8.1. I have a monitored internet bandwidth and I cannot go and download the 3 GB 8.1 update once more.
How can I repair my 8.1 machine?
I came across this article describing how to get an ISO image for 8.1 with a Windows 8 product Key. However, entering my Windows 8 Pro System Builder (OEM) key in the box fails and tells me that the key I entered is not for this product.
I'm currently running 8.1 and wish to effect a Refresh Recovery but when I enter disc when requested it states 'Not Valid'.
I purchased PC with Win 7Pro but in the time frame that allowed free upgrade to Win 8 Pro. I upgraded by downloading and installing - however I also purchased the Official upgrade discs 32/64 bit from Microsoft and received them some weeks after upgrade took place. I have since auto upgraded via App Store to 8.1 and I now wish to use Refresh Recovery but no matter which disc I insert Win7/8 it states invalid.
I bought an Acer notebook with Windows 8 SL (Single Language) and UEFI BIOS (with Secure Boot) factory installed (Windows Key is set in Bios).
I have the habit of installing all programs and make an image of partition C: in case of having to reinstall the entire system for problems with Windows, HDD exchange or similar cases. With this gain too long and not have to reinstall all the programs one by one.
My HDD is partitioned into 4 parts: C:, E:, F: and G:.
When I enter the Windows 8 app to generate the system image appear two partitions pre-marked for backup: C: (Programs) and EFI System Partition (no drive letter). C: partition is formatted as NTFS, but the EFI is as FAT32.
My question is: when I restore this, how should I format the partition where you install the system again (C ? Format all the partition as NTFS and Backup app creates the EFI partition FAT32 by own?
How it works and how to proceed? I will boot the system by CD-ROM.
I'm trying to create a Windows Blue WMC image using DISM. I'm running it from my host command prompt (9200).
I think I have to use the following commands:
DISM.exe /Mount-Wim /WimFile:S:Bluereadinstall.wim /index:1 /MountDir:S:Bluemount
DISM.exe /image:S:Bluemount /Set-edition:ProfessionalWMC
DISM.exe /Unmount-Wim /MountDir:S:Bluemount
The first command completes without problems, but the second one generates this error log:
2013-04-03 14:47:37, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2013-04-03 14:47:37, Info DISM DISM.EXE:
2013-04-03 14:47:37, Info DISM DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=4
2013-04-03 14:47:37, Info DISM DISM.EXE: Dism.exe version: 6.2.9200.16384
[Code]....
I thought 8.1 was supposed to make things easier? Not so for creating a System Image. Now, you have to use the Windows PowerShell (Admin) to get the job done. The image below will show the command string to use (boxed in red) and my target drive is/was Z:
Attachment 23893
Zoom image to enlarge.
You can use your installation media to access the Repair function and restore your System Image from there.
I recently upgraded to Windows 8.1 from the Microsoft Store. Everything went well (so far) and I want to create a system image backup.
I have a 1 TB external hard drive with plenty of space, but there are some mp3 files on it. I'd like to know if storing the disk image on this drive will affect the mp3's (i.e., are they safe?)
After doing some digging around I found the system image backup under windows 7 file recovery. Then I go to create system image and everything goes fine and then I get an error message after about half way through the back up . Error message will say something like not enough space on drive to create image and I am doing this on a 2TB external hard drive . I did notice one time I accidentally created 500 MB of unallocated space on this drive but I was getting this this error message before I did that and I am not even sure how I created it. I have another PC with windows 7 and don't have a problem with the scheduled image and data backups being performed weekly. Had this problem with windows 8? Also how do eliminate the 500 MB of unallocated space on my 2 TB External HD which is not really a problem but should not be there . I have my files backed up on this HD although I don't use windows data back up utility which I prefer Sync Back to perform instead .
View 11 Replies View RelatedI just bought Asus UX31A-R4005H (with Windows 8). Unfortunately Asus doesn't provide any application to restore Windows 8 back to factory conditions. So i need to recovery whole hard drive partitions back to factory settings.
Firstly i need to create a set of OEM factory recovery discs/usb flash.
1. I'm planning to create a system recovery drive (usb flash) with Windows 8 but i wonder if this usb flash will recover whole hdd back to factory conditions? If yes is it enough to use Windows 8 "create a recovery drive" option?
2. How could i create an original OEM factory recovery usb flash with 3rd party application?
Just like the title, how do I create a system image on windows 8.1? I have installed Windows 8.1 and have all my settings and programs just how I like it but I cant see how to create a system image.
View 7 Replies View RelatedI decided that I should, create a System Recovery DVD for my new computer. However when I try and do it I only get the option to create a recovery USB Drive.
I did that but I'd still like to make a DVD disk.
Ps. I see that my system recovery USB drive has an empty folder called Sources. If I was to place a backup of my C: drive in that folder would it be automatically accessible and usable from the DVD drive?
Hmmm, I can't seem to find a way to use Windows to create a backup of my C: drive either.
I recently bought a Dell Windows 8 desktop. I upgraded the desktop to Windows 8.1. I want to create a recovery drive using a DVD rather than a flash drive. (I understand Microsoft wants you to create recovery onto a flash drive rather than a DVD. Not sure why.)
I found several places on the net which discuss just how create recover onto a DVD. They suggest that I do a search on "Windows 7 file" and this will display an option to click on "Windows 7 File Recovery" ... and that will lead me through the steps to create my recovery onto a DVD.
Problem is "Windows 7 File" is not found. How do I get this onto my Windows 8.1 system?
I finally broke down and bought a modern laptop Asus A55A (K55A) and installed Ubuntu 12.04 in a dual boot situation. With the nefarious secureboot and other such nonsense Windows 8 install met with an untimely demise. However, I have the files left on the recovery partition (copied to my 16gb usb) and need to make an install disk. My only issue is that I can't find a way to do it in Ubuntu as all the tutorials I find assume that Windows is installed. Is there a way to make a bootable Windows 8 install usb or iso from the files on the recovery partition-without using Windows to make it? I would love to re-install Windows 8 and then setup a stale dual boot.
View 5 Replies View RelatedI need creating a recovery image of my system. I would like to create an image recovery drive with just the barebones needed for Windows 8 to run. I all ready have a recovery partition created. I just don't know how to create a recovery image for usage whenever something happens to the system.
View 1 Replies View RelatedI have spent most of the past 12 hours trying to restore my win8pro system from a system image. the image was saved to a usb hard drive. win8pro system image recovery won't see the usb hard drive. I tried copying the backup to a drive on my network, but recovery won't see that either, even when entering the exact path to the backup using the network option. I then tried to copy the backup to a second hard drive, installing that hard drive directly into the machine. no go, wouldn't even recognize the drive.
View 9 Replies View RelatedI am using windows 8.1. I have deleted my recovery partition by mistake. Is there any option to create again the same?
View 1 Replies View RelatedThis is for a Samsung NP550P5C... having typed it into Google, the options appear a little confusing with the best option being how to make recovery discs for an HP laptop (presumably using HP's built in wizard), requiring 4 DVD's. Other suggestions seem to tell you how to make a "Repair" disc for Windows 8 with one readers comments of.....
" Windows 8 recovery Disk is used to reset your PC - it is supposed to reload the operating system and restore factory default settings. You need a USB flash drive 16GB or larger. I haven't found yet a way to create Windows 8 recovery CD/DVD, which can be used to reinstall the operating system."
It's not even clear how to do it on a Flash Drive though I would prefer using discs...
I am new in Windows 8, Secure Boot, UEFI bios, etc.
I have a Windows 8 Single Language (SL) based system (Notebook Acer), that uses Secure Boot in UEFI Bios and has Windows Product Key recorded at BIOS by factory.
I have a 500GB HDD partitioned in drives C: (228GB), E: (40GB), F: (40GB), G: (78GB) and H: (64GB) and Windows is installed on C: partition.
I installed and configured all programs that I use and now I want to do an image to be used in cases of HDD damage, Windows crash or other cases that I need install OS and apps again. I want to earn time with this and don't have to install the apps one by one.
What is the best option (method) to do backup and restoration of the system?How I use the Boot DVD generated by the backup feature (Windows 7 File Recovery)?Can I do image only of partition C: or I need to include all other partitions?Do I need change the BIOS UEFI to LEGACY BIOS to boot with Windows Boot DVD generated?Do I need to format the C: partition before restore the image? What kind of format I need to use? NTFS? FAT32? GPT?
I have a lot of friends that are using Windows 8 now and all of them have the same doubts that I have.
Is it possible to create a new step-by-step tutorial of Backup and Restore process in Windows 8?
Trying to create a System Image Backup on a Windows 8.1 ACER laptop. My latest attempt is to a external hard drive with 3.63 TB free but the backup fails due to not enough disk .
I have attached the full error message.
New to the ways of Windows 8 and this is my first time trying to create a System Image Backup.