Just like the title, how do I create a system image on windows 8.1? I have installed Windows 8.1 and have all my settings and programs just how I like it but I cant see how to create a system image.
View 7 RepliesI am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
How Often Do You Create a System Recovery Image?
View 9 Replies View RelatedTrying to create a System Image Backup on a Windows 8.1 ACER laptop. My latest attempt is to a external hard drive with 3.63 TB free but the backup fails due to not enough disk .
I have attached the full error message.
New to the ways of Windows 8 and this is my first time trying to create a System Image Backup.
So I was just about to create a full system image of one of my HDD's, and I noticed that I have 2 different "system" drives.
My main system drive is the C: Drive, which is the 111.79gig HDD. Im not really sure why the 1TB drive is listed as a system drive, as well as being drive 0. Is there any easy way to fix this so everything to do with the system is back on the 111.79gig C: drive where it belongs?
I thought 8.1 was supposed to make things easier? Not so for creating a System Image. Now, you have to use the Windows PowerShell (Admin) to get the job done. The image below will show the command string to use (boxed in red) and my target drive is/was Z:
Attachment 23893
Zoom image to enlarge.
You can use your installation media to access the Repair function and restore your System Image from there.
New Win 8 user. I have tried creating a system image using this program but without success. I have an Asus X202E laptop and am trying to create the image on a 1TB USB hard drive. Everything goes well for a few seconds after the backup starts (the progress bar goes about 10% through) but it then halts and gives an error message: "There is not enough disk space to create the volume shadow copy on the storage location....". I have directed the backup to an empty 500GB partition on the hard drive so there should be ample space. Have tried the same procedure with another USB hard drive with the same result.
BTW, both hard drives show up normally in windows explorer.
I recently upgraded to Windows 8.1 from the Microsoft Store. Everything went well (so far) and I want to create a system image backup.
I have a 1 TB external hard drive with plenty of space, but there are some mp3 files on it. I'd like to know if storing the disk image on this drive will affect the mp3's (i.e., are they safe?)
After doing some digging around I found the system image backup under windows 7 file recovery. Then I go to create system image and everything goes fine and then I get an error message after about half way through the back up . Error message will say something like not enough space on drive to create image and I am doing this on a 2TB external hard drive . I did notice one time I accidentally created 500 MB of unallocated space on this drive but I was getting this this error message before I did that and I am not even sure how I created it. I have another PC with windows 7 and don't have a problem with the scheduled image and data backups being performed weekly. Had this problem with windows 8? Also how do eliminate the 500 MB of unallocated space on my 2 TB External HD which is not really a problem but should not be there . I have my files backed up on this HD although I don't use windows data back up utility which I prefer Sync Back to perform instead .
View 11 Replies View RelatedI have upgraded my Windows 8 PC to 8.1 yesterday and it seemed like everything is working fine until I tried to create System Image. I got an error 0x80780119 saying that there is to little space on one of the partitions.
I started looking into this problem and indeed one of the partitions does not meet the requirements. There are following partitions on my drive:
Code:
DISKPART> list partition
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Recovery 300 MB 1024 KB
Partition 2 System 100 MB 301 MB
Partition 3 Reserved 128 MB 401 MB
Partition 4 Primary 74 GB 529 MB
Partition 5 Primary 390 GB 75 GB
Partition 1 has only 13MB free space. Partition 2 has 70MB free space, partition 3 is MSFTRES, partition 4 is my C drive with around 35GB free and partition 5 is not included in system image.
Partitions were create like this during installation of Windows 8 - clean install from scratch. I am using UEFI so the drive is GPT formatted.
So I thought, OK I can resize my C drive a little, move the partitions and expand the 1st one. I tried using GParted but it is not able to move the MSFTRES partition. It does not recognize the file system on it.
So the question is: Is it possible to "clean up" the 1st partition in anyway? If not, is there anything special about MSFTRES partition? Or can I just remove it and create it a little further and just flag it as msftres with GParted?
I am now getting an Event ID 513 log every time I create a System Image backup using Macrium Reflect Free; however, it doesn't seem to affect the restoral because everything seems just fine after same. Since I have never noticed these logs when running Win 8.0, I'm wondering if this is a brand new issue with 8.1? So, here is my Macrium Free version information and a copy of the Event ID 513 error log. Seeing this log on 8.1 or can confirm it is not present after an 8.0 backup.
View 9 Replies View RelatedI've been dual-booting Windows 8 Pro and Windows 7 Ultimate, but a while back my Windows 8 kind of went "South" and wouldn't boot at all (I got an error message that a device was "not attached"). I have a recent system image on an external USB hard drive, but when I boot to "system recovery" using my repair disk it can't seem to find my USB drive at all.
The tutorials here mention installing a SATA driver to access disks that are not recognized, but this doesn't seem to be the case.
I bought an Acer notebook with Windows 8 SL (Single Language) and UEFI BIOS (with Secure Boot) factory installed (Windows Key is set in Bios).
I have the habit of installing all programs and make an image of partition C: in case of having to reinstall the entire system for problems with Windows, HDD exchange or similar cases. With this gain too long and not have to reinstall all the programs one by one.
My HDD is partitioned into 4 parts: C:, E:, F: and G:.
When I enter the Windows 8 app to generate the system image appear two partitions pre-marked for backup: C: (Programs) and EFI System Partition (no drive letter). C: partition is formatted as NTFS, but the EFI is as FAT32.
My question is: when I restore this, how should I format the partition where you install the system again (C ? Format all the partition as NTFS and Backup app creates the EFI partition FAT32 by own?
How it works and how to proceed? I will boot the system by CD-ROM.
I am new in Windows 8, Secure Boot, UEFI bios, etc.
I have a Windows 8 Single Language (SL) based system (Notebook Acer), that uses Secure Boot in UEFI Bios and has Windows Product Key recorded at BIOS by factory.
I have a 500GB HDD partitioned in drives C: (228GB), E: (40GB), F: (40GB), G: (78GB) and H: (64GB) and Windows is installed on C: partition.
I installed and configured all programs that I use and now I want to do an image to be used in cases of HDD damage, Windows crash or other cases that I need install OS and apps again. I want to earn time with this and don't have to install the apps one by one.
What is the best option (method) to do backup and restoration of the system?How I use the Boot DVD generated by the backup feature (Windows 7 File Recovery)?Can I do image only of partition C: or I need to include all other partitions?Do I need change the BIOS UEFI to LEGACY BIOS to boot with Windows Boot DVD generated?Do I need to format the C: partition before restore the image? What kind of format I need to use? NTFS? FAT32? GPT?
I have a lot of friends that are using Windows 8 now and all of them have the same doubts that I have.
Is it possible to create a new step-by-step tutorial of Backup and Restore process in Windows 8?
I'm trying to create a Windows Blue WMC image using DISM. I'm running it from my host command prompt (9200).
I think I have to use the following commands:
DISM.exe /Mount-Wim /WimFile:S:Bluereadinstall.wim /index:1 /MountDir:S:Bluemount
DISM.exe /image:S:Bluemount /Set-edition:ProfessionalWMC
DISM.exe /Unmount-Wim /MountDir:S:Bluemount
The first command completes without problems, but the second one generates this error log:
2013-04-03 14:47:37, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2013-04-03 14:47:37, Info DISM DISM.EXE:
2013-04-03 14:47:37, Info DISM DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=4
2013-04-03 14:47:37, Info DISM DISM.EXE: Dism.exe version: 6.2.9200.16384
[Code]....
best methods to include LP in an ISO ?
work WINDOWS 8.9600 all editions.
How to create an iso image including the language pack for me brother
I have read the tutorial (Refresh Windows 8 - Create and Use Custom Recovery Image) . Would I not get the same result if I created a Disk and Partition Backup using a program like Acronis or Easeus? That way I hope to keep all my initial system, personal files and third party applications.
View 5 Replies View RelatedAm using recimg to create custom image on freshly upgraded win 8.1 install. It fails almost immediately with this message appearing in a pop up:
"The procedure entry point ??0BufferedStream@UnBCL@@QEAA@PEAVStream@1@K@Z could not be located in the dynamic link library c:windowssystem32migwizmigcore.dll"
Further info:
Problem signature:
Problem Event Name: APPCRASH
Application Name: recimg.exe
Application Version: 6.3.9600.16412
Application Timestamp: 5243fc60
Fault Module Name: KERNELBASE.dll
[Code] ........
System info :
OS Name Microsoft Windows 8.1
Version 6.3.9600 Build 9600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name TOSHIBA
[Code] .....
I have a Dell Inspiron 660s desktop running Win 8. How large of a USB Flash Drive do I need to create a copy of the factory image? How large of a USB Flash Drive do I need to create a copy of the pre-installed applications, drivers and utilities? The only apps I have are the standard ones that come with the 660s running Win 8. Using Dell Backup & Recovery (Pro or Premium), I created a system backup on an external hard drive. This resulted in my external hard drive being partitioned into DBR_Master (F), which used 31.5 GB of the 1TB hard drive; and, DBR_Boot (G), using 23.6 MB. What is DBR_Master (F) all about? What is DBR_Boot (G) all about? In the event of an OS crash, will I be able to re-boot from the external hard drive? How often is it recommended to do a full system backup?
Since a system backup does not backup applications like MS-Office, is the purpose of periodic backups to capture future fixes & revisions to the OS? Since there is still a lot of unused space on the external hard drive, is it ok to save my daily data backups to the external hard drive? I tried to save data backups using File History to the DBR_Master (F) drive but it would not let me. I created a new folder in DBR_Master (F) but that didn't work. I receive a message that the destination was not connected. Where should I save daily data backups? Last question - does it matter whether I use File History or Dell Backup and Recovery to do daily data backups? Are there any advantages or disadvantages to using one over the other -- they seem to do the same thing?
Currently I have win 7 Vaio. I'm buying the x carbon Lenovo touchscreen which had win 8. I love the set up I have on my Vaio system image. Can I use it on my win 8 x carbon Lenovo when it arrives?
View 2 Replies View RelatedI have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
So when I was using Windows Vista I used Acronis True Image, when windows 7 came along I use macrium reflect, now I am using windows 8.
don't know what to try or use this time. I have three hard drives one for my OS, one for media+installation of programs and lastly one for backups. I want to make a system image in case something goes wrong save me the hassle of reinstalling and downloading again?
Using the built in Windows 8 function. Using a User Profile tool and experimenting with copying profile settings, I managed to corrupt my Windows 8.1 install. I thought, no, problem, I'd made images of the system partition and I would restore one of those.
Upon attempting to copy one of those image files back to the system partition, I found my machine unbootable.
I used Aomei Partition Assistant to create the image and to copy it back. Aomei though requires that the destination partition be deleted before it will copy and I think that's the root of the problem. I suspect that Aomei destroys the hidden UEFI partitions in the process which renders the machine unbootable. I did check with Diskpart and could see that I no longer had four partitions after the above which does indicate that Aomei did trash one of the other partitions.
I have now used my bootable install media to make a new windows 8 instal on the machine. I can see with Diskpart that the machine again has the four UEFI partitions.
So, now I'm ready to try again to copy my backup system partition to the new system partition. I had put in lots of work updating to 8.1, installing software, and customizing settings, etc. so I'd rather not reinstall everything again!
The question is how to do this without messing it up again. By the way, windows own "restore from image" function will not allow me to select my Aomei created drive image.
My thought right now is to find a different partition copy tool which will allow me to OVERWRITE the new system partition on the machine (as said Aomei Partition Assistant does not allow this). The old version of Norton Ghost would do that, but my only copy is floppy based and this new MOBO doesn't even have a floppy connector.
I do want to maintain the setup as UEFI and I'm wondering whether there's anything else I need to know about UEFI installs that would suggest another approach.If indeed I can solve this by overwriting the partition (instead of deleting and creating a new one), any recommendation for a bootable tool (USB or CD) ....
So, previously I had Windows 8 and a system image of that drive. I want to dual-boot it with Win7, so I replace my Win8 with Win7, and reinstall Win8 on another partition. Can I restore my Win8 with the previous system image, or will it affect my Win7?
View 5 Replies View Relatedhave our friends computer all set up and ready to go.One of the things that came about during this process is, I learned that you can make a real disk image in Windows 8 without using a third party software program.
Something I didn't think was possible, and you don't have to jump through hoops to do it.
As "Badrobot", pointed out to me.
There is a utility in the Windows Control Panel named Windows 7 File Recovery, (the strange name is probably why I never figure out what it does) It is really the Disk Image utility from Windows 7 and will make a Disk Image of the C: drive on your Windows 8 computer, and has nothing to do with recovering Windows 7 files, as far as I can see.
Why they didn't include this option in Windows 8 Recovery is a mystery.
Anyway the utility is really easy to use, makes a backup very quickly, and also creates a Windows Boot disk that will take you to the recovery interface if your computer won't boot or go to the Recovery Screen.
I haven't actually checked but it says that the option to restore you computer from a Disk Image will now, be available when you open the System Restore Windows along with the Refresh, and Restore options.
[URL]
On the laptop I'm setting up, I created a new partition just big enough to hold the image and placed it there. On my computer I placed it on a different physical drive so that it will work even if my hard drive dies.
So I have to admit that I complained about Windows 8 not having this capability in error, but I still say that it's Microsoft's fault for hiding it in a location that I never expected to find it, under a name that makes no sense at all.
As long as I'm complaining again, I want to ask, "Why can't you type in "Disk Manager" in the search on the Metro screen and find "Disk Manager".
Half of the problem with Windows 8 is that they changed the name on things that have been the same for years.
Anyway both computers now have Windows 8 generated Disk Images and I feel better. LOL
I still have my third party image as well. BSTS
I got two laptops today, one with Windows 7 and the other with Windows 8, both 64-bit machines.
I don't have a windows 8 dvd around and I don't have the internet to download a windows 8 .iso image.
All I have is a USB stick. I'm not sure how creating a system image works but from the last article I read, both computers must have equal disk size or larger and the destination disk of the laptop for the process is a tad smaller than the source partition.
I am trying to create a system repair disc, and I am getting the message: "do not have the files to create system repair disc". Why? How do I get those files. Never had a problem like this trying to create a system back up in the past. Running Windows 8.
View 1 Replies View RelatedIn Windows 8 Home (the edition that came with my Dell XPS) there is no option to save System Image to Network, only to Disc or HD.
Is this feature missing from 'Home' version only and is the option to save to Network available in Windows 8 Pro like in W7?
If so what is the best and cheapest way to upgrade (officially, not via torrents) to Windows 8 Pro?
I am trying to get a handle on how these 2 functions are related. I assume the Recovery disk would be needed if you can't boot to the computer (assume the OS needs to be present) and does the Recovery disk replace the boot files that may be damaged and then after you get booted up I assume the System Image (is that is referred to as a "backup")?? would be ran to get the computer back to the working order when the Image was taken. Assume that the Recovery disk would take place of the OS installation disk if it were not available and you couldn't just reinstall the OS and so you could load the Image.
View 3 Replies View RelatedIts my first time to create my first system image in my windows 8. Can I exclude a certain file if not how many blank cd's do I need I got 146GB used currently in my C drive and while creating a system image could it take the process an hour or more?
View 4 Replies View RelatedI'm attempting to follow the instructions here, to do a system image of my Dell Windows 8 machine:
Using Windows 8′s “hidden” backup to clone and recover your whole PC | Ars Technica
As I go through the wizard, I arrive at this screen:
I don't have the option to deselect any of these "drives". I proceed with the backup - it chugs along, and then consistently fails here:
"One of the critical volumes is not having enough free space." It doesn't tell me which - but, it's certainly not the OS drive, this is a virgin system.