Maintenance :: How To Create System Image Backup Using Macrium Reflect
Oct 26, 2013
I am now getting an Event ID 513 log every time I create a System Image backup using Macrium Reflect Free; however, it doesn't seem to affect the restoral because everything seems just fine after same. Since I have never noticed these logs when running Win 8.0, I'm wondering if this is a brand new issue with 8.1? So, here is my Macrium Free version information and a copy of the Event ID 513 error log. Seeing this log on 8.1 or can confirm it is not present after an 8.0 backup.
View 9 Replies
ADVERTISEMENT
Jan 4, 2014
Trying to create a System Image Backup on a Windows 8.1 ACER laptop. My latest attempt is to a external hard drive with 3.63 TB free but the backup fails due to not enough disk .
I have attached the full error message.
New to the ways of Windows 8 and this is my first time trying to create a System Image Backup.
View 2 Replies
View Related
Nov 5, 2013
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
View 6 Replies
View Related
Oct 28, 2013
I have a question about Macrium Reflect Free, and dual boot...
I have two installations of Windows 8 (and Windows 8.1), on two separate SSDs. Let's call one SYSTEM1, and the other one SYSTEM2.
Let's say I have booted inside the SYSTEM1 Windows installation. Now I want to backup SYSTEM2, with Macrium Reflect Free. I load Macrium Reflect and select all available partitions on the SYSTEM2 disk (which are just two, the main one and a system-reserved one).
By doing like this, will also the MBR (Master Boot Record) of SYSTEM2 get copied inside the Macrium image-backup? In other words, will Macrium Reflect always copy the master boot record (if available), even if the selected drive is not the one from which Windows is currently running?
Or will the MBR get copied just with the option "create an image of the partition(s) required to backup and restore Windows"? Probably not.
I'm interest about this because it would be useful to do a backup of the MBR (together with the partitions), in case a virus infects it.
View 6 Replies
View Related
Nov 26, 2013
Has the "Event 513 error" issue been solved in the latest version of Macrium Reflect (Free)? This version: 5.2.6433 (11 November 2013)
Event 513 errors in Windows 8.1
Possible Macrium Issue?
In any case, is it currently safe to use Macrium Reflect (latest free version), from the point of view of operating system integrity (with Windows 8.1)?I'm a little scared that this "Event 513 error" issue could corrupt Windows 8.1 in some way.
View 1 Replies
View Related
Apr 1, 2014
I am using Macrium Reflect Free to make weekly images of my PC. Every few weeks Macrium provides updates to the program with bug fixes and even feature enhancemen.
When you make a rescue disk that will be used to boot a your dead computer and restore a disk image, part of that process sets up the current version of Reflect on that disk. Over time the (old) version on the rescue disk and the current version you are using for backup get further and further apart.
Macrium does not provide any guidance that I can find on remaking your rescue media to keep it up to date. The obvious thing would be to remake rescue media for each update.have any info on criteria from Macrium that would safely allow a less tedious frequency of media updates?
View 9 Replies
View Related
Jan 2, 2014
I'm just been playing with free backup tools; Macrium Reflect and Aomei Backupper, and working out which works best for me for those times when you need to boot from a Recovery CD.
I've been using a Toshiba PC which has 64-bit Windows 8 preinstalled, and is using a GPT file system. I changed the boot order so that the CD/DVD drive comes before the main HDD, if it finds a valid bootable source.
The BIOS options on the PC also include:
* Secure Boot: enabled or disabled
* Boot mode: UEFI or Legacy (CSM)
I tried both Secure Boot enabled and disabled; this didn't seem to affect the findings below.
However the differences some on switching between UEFI mode and Legacy mode in the BIOS settings.
My question was whether I can boot from a Recovery CD in UEFI Mode; although the PC can access bootable CDs in Legacy Mode, it won't boot itself.
Aomei Backupper 1.6
CD was created using the Windows PE option rather than Linux. By changing to Legacy boot mode, I can boot from the Aomei CD, and it then could backup my HDD to an external USB drive. But I had to change back to UEFI boot to make the computer boot again.
Macrium Reflect Free v5.2.6444 - 32-bit.
This is similar to Aomei. I selected the option to create a CD using Windows PE (version 4). By changing to Legacy boot mode, I can boot from the Macrium CD, and it then could backup to an external USB drive. But I had to change back to UEFI boot to make the computer boot again.
Macrium Reflect Free v5.2.6444 - 64-bit.
This works! I selected the option to create a CD using Windows PE (version 4), 64-bit this time. This creates a CD which will boot in UEFI mode. I think this is because it uses the 64-bit version of Windows PE 4 rather than 32-bit.
So on this basis, I prefer Macrium Reflect Free, because it creates a CD which I can boot in UEFI mode without needing to get into the BIOS settings. It also works in Secure Boot mode.
Although this particular Toshiba seems to allow me to get into the BIOS without too much trouble by repeatedly hitting the F2 key on startup, I know not all PCs are so easy and some times when you need a recovery CD, the PC may not be functioning well enough to let you get into the BIOS easily.
View 9 Replies
View Related
Aug 10, 2014
I recently upgraded to Windows 8.1 from the Microsoft Store. Everything went well (so far) and I want to create a system image backup.
I have a 1 TB external hard drive with plenty of space, but there are some mp3 files on it. I'd like to know if storing the disk image on this drive will affect the mp3's (i.e., are they safe?)
View 4 Replies
View Related
Mar 30, 2013
After doing some digging around I found the system image backup under windows 7 file recovery. Then I go to create system image and everything goes fine and then I get an error message after about half way through the back up . Error message will say something like not enough space on drive to create image and I am doing this on a 2TB external hard drive . I did notice one time I accidentally created 500 MB of unallocated space on this drive but I was getting this this error message before I did that and I am not even sure how I created it. I have another PC with windows 7 and don't have a problem with the scheduled image and data backups being performed weekly. Had this problem with windows 8? Also how do eliminate the 500 MB of unallocated space on my 2 TB External HD which is not really a problem but should not be there . I have my files backed up on this HD although I don't use windows data back up utility which I prefer Sync Back to perform instead .
View 11 Replies
View Related
Jul 21, 2013
I am new in Windows 8, Secure Boot, UEFI bios, etc.
I have a Windows 8 Single Language (SL) based system (Notebook Acer), that uses Secure Boot in UEFI Bios and has Windows Product Key recorded at BIOS by factory.
I have a 500GB HDD partitioned in drives C: (228GB), E: (40GB), F: (40GB), G: (78GB) and H: (64GB) and Windows is installed on C: partition.
I installed and configured all programs that I use and now I want to do an image to be used in cases of HDD damage, Windows crash or other cases that I need install OS and apps again. I want to earn time with this and don't have to install the apps one by one.
What is the best option (method) to do backup and restoration of the system?How I use the Boot DVD generated by the backup feature (Windows 7 File Recovery)?Can I do image only of partition C: or I need to include all other partitions?Do I need change the BIOS UEFI to LEGACY BIOS to boot with Windows Boot DVD generated?Do I need to format the C: partition before restore the image? What kind of format I need to use? NTFS? FAT32? GPT?
I have a lot of friends that are using Windows 8 now and all of them have the same doubts that I have.
Is it possible to create a new step-by-step tutorial of Backup and Restore process in Windows 8?
View 2 Replies
View Related
Jun 26, 2014
I own an OEM Machine which is from Acer.
To ask what is probably well known amongst IT pro's; does a system image backup solution (and consequently a restore from that image if needs be) work on OEM PC's, like a desktop from Acer, actually work without problems, and would I get a proper bootable and working machine after restoration.
Brief scenario - I have used Acronis TI 2014 (Or even the Windows 8.1 system image utility) to create an image of my C: Drive/EFI Partition/Recovery Partition - and backed it up to an external USB HDD.
My OS crashes for whatever reason and I can't boot.
I then either use my Acronis bootable media CD (which I've tested and boots despite all the secure boot/UEFI/GPT mania going about users like myself) to reinstall the Acronis disk image.
OR I use a Widnows 8.1 bootable disk with the ISO (which I've tested to boot) to reinstall the Windows created system image. (I could also use the recovery drive I created in Win 8.1, which just to add, however irrelvanat it might be, includes my OEM factory default partition which was copied as part of the recovery flash drive creation)
Would either of those restore solutions give me a reasonably likely working PC again - taking into account all the stuff I don't understand like the Windows 8.1 OEM key being on the motherboard (which I would understand in terms of Windows activation and authentication could have a negative impact on restoring images over an OEM installed OS and it's partitions)....
View 9 Replies
View Related
Mar 12, 2014
I recently got myself into a quandary. I installed 4 additional drives with the intent of creating a RAID volume that's supported by the BIOS. In order to do that I must change the BIOS setting for the controller which includes all volumes including my boot drive (which I don't intend to RAID.) The problem I have is that when I switch the controller from UEFI to RAID, Windows Recovery will not use the System Image that I made. It says the volume was created under a different setting (Bios vs. EFI).
What are my options? Is there a different backup setting that will preserve all my installed software? I'm not concerned about data which I can copy to an external volume but it would take several days to get all my software reinstalled. I'd like to avoid that. I assume I will have to reinstall Windows 8.1 Pro and then use a backup program to restore everything else. If that's the case, then I need to know which backup program will work. If there's a better way, I'd love to know. I see my options as either, get another backup program, get a separate controller card for either the boot drive or the RAID volume, or reinstall everything.
View 9 Replies
View Related
Jun 25, 2013
I have spent most of the past 12 hours trying to restore my win8pro system from a system image. the image was saved to a usb hard drive. win8pro system image recovery won't see the usb hard drive. I tried copying the backup to a drive on my network, but recovery won't see that either, even when entering the exact path to the backup using the network option. I then tried to copy the backup to a second hard drive, installing that hard drive directly into the machine. no go, wouldn't even recognize the drive.
View 9 Replies
View Related
Mar 10, 2013
I'm having a problem with Windows System Image Backup just when I try to do a image backup it will say that it has failed and suggest to do a disk check. I've searched and some users say to use third party backup programs should I run the disk check first or just go with a different backup tool.
View 1 Replies
View Related
Jul 30, 2013
After upgrading to the Win 8.1 upgrade I can no longer find the full backup selection and clicking on the change backup settings only shows a little clock. Has the backup function been removed from win 8.1?
View 8 Replies
View Related
Oct 26, 2013
After upgrading to Windows 8.1, System Image Backup failed resulting in the following message:
"The backup failed. There is not enough space to create the volume shadow copy on the storage location. - (0x80780119)"
However, there was enough free space in the external hard disk: 762.82 GB.
Windows Disk Management, and other tools, provided the following information about the partition structure of Disk 0 (238.35 GB):
Type File System Capacity Free Space Recovery NTFS 499 MB 499 MB
EFI System Partition FAT32 300 MB 300 MB Microsoft Reserved Partition Other 128 MB
Recovery (?Volume{792d...) NTFS 350 MB 350 MB Recovery (?Volume{8b75...) NTFS 350 MB 350 MB
Recovery (SAMSUNG_REC2) NTFS 19.72 GB 19.72 GB Recovery (SAMSUNG_REC) NTFS 1.00 GB 1.00 GB
Boot, Page File, Crash Dump, Primary Partition NTFS 216.16 GB 144.76 GB
I am suspicious about having two 350 MB recovery partitions.
View 9 Replies
View Related
Jul 17, 2013
How Often Do You Create a System Recovery Image?
View 9 Replies
View Related
Jul 10, 2013
So I was just about to create a full system image of one of my HDD's, and I noticed that I have 2 different "system" drives.
My main system drive is the C: Drive, which is the 111.79gig HDD. Im not really sure why the 1TB drive is listed as a system drive, as well as being drive 0. Is there any easy way to fix this so everything to do with the system is back on the 111.79gig C: drive where it belongs?
View 6 Replies
View Related
Apr 10, 2014
I'm planning on creating in addition to a CD a USB flash restore drive. The problem is that no where can I find how large of a flash drive do I need.
View 5 Replies
View Related
Mar 30, 2014
1. Does secure boot need to be disabled to boot to the Macrium Reflect Free boot disk? I've got a friend I am working remotely and she has been unable to get the disk to boot in order to restore an image I made for her a while back. I assume secure boot is enabled on her Win 8 machine.
2. From what I've read, the pay version of Macrium Reflect seems able to allow you to open the application in Windows, set up the restore, and then it reboots automatically into the Macrium recovery environment. Would secure boot interfere with that operation?
View 9 Replies
View Related
Mar 29, 2013
My system is dell xps 8300. I have upgraded from windows 7 ultimate(64bit) to windows 8 pro 64 bit. My system has
1) dell oem partition (no drive ketter 39MB),
2) recovery partition (ntfs no drive letter) 13.25 GB free 2.94 Gb,
3) C drive windows system partition 100Gb free 31,24 GB rest of the two partitions are 175 Gb each (logical drives).
Total my hard disk capacity is 500GB.
What is the difference of taking backup and which is better for recovering the system to original state just before the backup.
1) System image backup(recovery partition & windows system partition) using windows 8 system backup..ie using
windows 7 file recovery menu under control panel.
2) Creating custom recovery image for refresh.(command: recimage -CreateImage)
I have done both and my backup location is external hard drive of 2TB capacity. I made system recovery disk(dvd) from the windows 7 file recovery menu.
The custom recovery image wim file is of size 22.GB
The recovery partition backup(vhdx) is of 9GB and the windows system partition backup is of 43GB.
I have also used macurium reflect pro to take backup of my recovery and windows partition using macurium rescue cd.
View 4 Replies
View Related
Apr 17, 2013
My windows 8 pro install messed up n i have almost 2.8tb of stuff on my drive on a 3tb hd. I have an identical hd as a backup which i have (an apparently successful) a backup of my system from a couple of weeks ago on. I had set the system to do scheduled backups of the system (set to backup a system image of efi partition and c. There were a few times where i was trying to get other things done and the systemwas running slow so i cancelled the backups when i noticed them running. The software stopped the backups (seemingly successfully).
As i say my system messed up - i came home to find out it was no longer downloading (as i had left it doing when i went to work) but was on a blue screen (bsod?) saying the system needs to be restarted. Since then it didnt work well at all and after dskchk reported that several sectors were damaged so it was moving data to spare sectors (or whatever it generally reports when this happens) there were a lot of files messed up or reported as deleted when doing a file recovery scan with recuvva.
So i decided to restore the backed up system image from the other hd. Incidentally i tried mounting the vhdx backup image from that hd via windows explorer which then reported "the disk needs formatting" and didnt get any success mounting via disk management either (it mounted in the app but didnt show up on windows explorer and if i tried to access info on it via disk management it reported the same"disk needs formatting prompt".
So when i booted my win 8 dvd it didnt work cos the dvd wasnt an efi booting version so i had to boot from a usb version with the efi bit included.
I formatted the system drive and chose to do an image restore. It started doing the restore (apparently) but every time i came back to it later i had the follwing error:
"Re-image your computer
The system image restore failed.
Error details: The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria Ox80073B92"
It took me so long to set up my system n i have a lot of my own data on there too. The system drive I formatted was created in diskpart and then re formatted with "format" command (as it created the disk in raw mode) so now it is ntfs mode (uncompressed).
View 9 Replies
View Related
Jun 6, 2013
I started to use the "Create System Image" of the "Windows 7 File Recovery" on my Windows 8 laptop. But after the screen which flashes the total size that would be required, when I ask it to start the process expecting it to prompt me for the 1st DVD, it flashes the message, - "The back-up failed. The system is not ready. (0x80070015) " . I am trying this on an out-of-the-box laptop with pre-installed Windows 8. Also tried it by disabling the anti-virus, but to no avail.
Then I tried to start the process with a 4.7 GB blank DVD already in place. Then it flashed the message "Insert a blank media bigger than 1 GB". Since I expected it take anywhere between 3-8 DVDs, I kept about 9 DVDs ready. I also inserted a USB pen-drive of 16 GB and tried to create the system image. Again it flashed the same message of insert a blank media greater than 1 GB in F: (same drive as USB) -??????? I mean the USB is already in place and has been assigned the drive letter as F:. How can I insert a blank media there ??
I am using Windows 8 Single Language. I was able create a repair disc without issues, though.
View 4 Replies
View Related
Dec 19, 2013
I can't get windows 8.1 system image to burn to my backup drive it says access denied for some reason or another, and i can't get it to burn to dvd-r ether. I want to do a image of my drive.
View 6 Replies
View Related
Jun 30, 2013
I thought 8.1 was supposed to make things easier? Not so for creating a System Image. Now, you have to use the Windows PowerShell (Admin) to get the job done. The image below will show the command string to use (boxed in red) and my target drive is/was Z:
Attachment 23893
Zoom image to enlarge.
You can use your installation media to access the Repair function and restore your System Image from there.
View 9 Replies
View Related
Jan 8, 2013
New Win 8 user. I have tried creating a system image using this program but without success. I have an Asus X202E laptop and am trying to create the image on a 1TB USB hard drive. Everything goes well for a few seconds after the backup starts (the progress bar goes about 10% through) but it then halts and gives an error message: "There is not enough disk space to create the volume shadow copy on the storage location....". I have directed the backup to an empty 500GB partition on the hard drive so there should be ample space. Have tried the same procedure with another USB hard drive with the same result.
BTW, both hard drives show up normally in windows explorer.
View 9 Replies
View Related
Oct 21, 2013
Windows 8.1 64 bit pc48 GB RamIntel i7 - 3960X CPUBoxxTech ComputerDrive C: SSD - 446 GB
When I first got my new personal computer in January, I created a System Image using Microsoft's utility. I typically use Acronis for my backups, but after major changes, I use both Microsoft and Acronis.
Now, I am attempting to complete a System Image Backup using Microsoft's utility so that I can fix my SecureBoot concern, knowing that I have a safety net in place. Unfortunately, I am unable to complete a backup. BoxxTech suggests that I use Microsoft's utility.
I begin with the File History in the Control Panel as shown below. Note, that I have plenty of room on my FreeAgent F Drive (standalone USB drive). Yet, Microsoft's utility believes otherwise.
Only the three items that shown to be selected are selected. In other words, there are no other drives or partitions off-screen that are selected.
Thinking that it might be a problem with my external USB hard drive, I look at using one of my internal drives, T.
I get the same error message as shown earlier.
why I am unable to back-up my personal computer using Windows 8.1?
View 9 Replies
View Related
Oct 20, 2013
Just like the title, how do I create a system image on windows 8.1? I have installed Windows 8.1 and have all my settings and programs just how I like it but I cant see how to create a system image.
View 7 Replies
View Related
Mar 31, 2014
I need to change the schedule I have already created for a System Image Backup. How do I get into schedule settings to change it?
View 3 Replies
View Related
Apr 4, 2014
Win 8.1 ProThe system allows system image backup done on either external hard drive ( which I do every week ), or on DVDs. Why it does not allow USB flash drive ? I tried to use a 32 GB flash and it refuses to do backup on it.
View 11 Replies
View Related
Mar 7, 2013
I've been dual-booting Windows 8 Pro and Windows 7 Ultimate, but a while back my Windows 8 kind of went "South" and wouldn't boot at all (I got an error message that a device was "not attached"). I have a recent system image on an external USB hard drive, but when I boot to "system recovery" using my repair disk it can't seem to find my USB drive at all.
The tutorials here mention installing a SATA driver to access disks that are not recognized, but this doesn't seem to be the case.
View 5 Replies
View Related
