Currently I have win 7 Vaio. I'm buying the x carbon Lenovo touchscreen which had win 8. I love the set up I have on my Vaio system image. Can I use it on my win 8 x carbon Lenovo when it arrives?
View 2 Replies
I have a Win 8.1 laptop without a disk drive which also did not come with a cd of operating system. What software, preferably free, can I use to copy my operating system to USB in case I ever need to reinstall Win 8.1?
How do I just copy the operating system without all the software I have added since acquiring this laptop?
I couldn't repair/replace my laptop's corrupt files doing an sfc or dism scan and had to do a reset as I couldn't do a refresh. I thought my laptop was clean when I created my last system image, last month, but when it came to using the system image I realised there was corrupt files on there too so I had to do another reset. What checks should I do before creating a system image? so I know that as well as there being no viruses there are no corrupt files either. Check for errors in Event Viewer and do an sfc and dism scan?
View 2 Replies View RelatedI had a windows 7 laptop which finally died but before it did a made a system image backup to my external hard drive so I have all the files. How do I load that onto my new windows 8.1 laptop so I have all my files there?
View 4 Replies View RelatedI've been dual-booting Windows 8 Pro and Windows 7 Ultimate, but a while back my Windows 8 kind of went "South" and wouldn't boot at all (I got an error message that a device was "not attached"). I have a recent system image on an external USB hard drive, but when I boot to "system recovery" using my repair disk it can't seem to find my USB drive at all.
The tutorials here mention installing a SATA driver to access disks that are not recognized, but this doesn't seem to be the case.
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
Just like the title, how do I create a system image on windows 8.1? I have installed Windows 8.1 and have all my settings and programs just how I like it but I cant see how to create a system image.
View 7 Replies View RelatedSo when I was using Windows Vista I used Acronis True Image, when windows 7 came along I use macrium reflect, now I am using windows 8.
don't know what to try or use this time. I have three hard drives one for my OS, one for media+installation of programs and lastly one for backups. I want to make a system image in case something goes wrong save me the hassle of reinstalling and downloading again?
Using the built in Windows 8 function. Using a User Profile tool and experimenting with copying profile settings, I managed to corrupt my Windows 8.1 install. I thought, no, problem, I'd made images of the system partition and I would restore one of those.
Upon attempting to copy one of those image files back to the system partition, I found my machine unbootable.
I used Aomei Partition Assistant to create the image and to copy it back. Aomei though requires that the destination partition be deleted before it will copy and I think that's the root of the problem. I suspect that Aomei destroys the hidden UEFI partitions in the process which renders the machine unbootable. I did check with Diskpart and could see that I no longer had four partitions after the above which does indicate that Aomei did trash one of the other partitions.
I have now used my bootable install media to make a new windows 8 instal on the machine. I can see with Diskpart that the machine again has the four UEFI partitions.
So, now I'm ready to try again to copy my backup system partition to the new system partition. I had put in lots of work updating to 8.1, installing software, and customizing settings, etc. so I'd rather not reinstall everything again!
The question is how to do this without messing it up again. By the way, windows own "restore from image" function will not allow me to select my Aomei created drive image.
My thought right now is to find a different partition copy tool which will allow me to OVERWRITE the new system partition on the machine (as said Aomei Partition Assistant does not allow this). The old version of Norton Ghost would do that, but my only copy is floppy based and this new MOBO doesn't even have a floppy connector.
I do want to maintain the setup as UEFI and I'm wondering whether there's anything else I need to know about UEFI installs that would suggest another approach.If indeed I can solve this by overwriting the partition (instead of deleting and creating a new one), any recommendation for a bootable tool (USB or CD) ....
So, previously I had Windows 8 and a system image of that drive. I want to dual-boot it with Win7, so I replace my Win8 with Win7, and reinstall Win8 on another partition. Can I restore my Win8 with the previous system image, or will it affect my Win7?
View 5 Replies View Relatedhave our friends computer all set up and ready to go.One of the things that came about during this process is, I learned that you can make a real disk image in Windows 8 without using a third party software program.
Something I didn't think was possible, and you don't have to jump through hoops to do it.
As "Badrobot", pointed out to me.
There is a utility in the Windows Control Panel named Windows 7 File Recovery, (the strange name is probably why I never figure out what it does) It is really the Disk Image utility from Windows 7 and will make a Disk Image of the C: drive on your Windows 8 computer, and has nothing to do with recovering Windows 7 files, as far as I can see.
Why they didn't include this option in Windows 8 Recovery is a mystery.
Anyway the utility is really easy to use, makes a backup very quickly, and also creates a Windows Boot disk that will take you to the recovery interface if your computer won't boot or go to the Recovery Screen.
I haven't actually checked but it says that the option to restore you computer from a Disk Image will now, be available when you open the System Restore Windows along with the Refresh, and Restore options.
[URL]
On the laptop I'm setting up, I created a new partition just big enough to hold the image and placed it there. On my computer I placed it on a different physical drive so that it will work even if my hard drive dies.
So I have to admit that I complained about Windows 8 not having this capability in error, but I still say that it's Microsoft's fault for hiding it in a location that I never expected to find it, under a name that makes no sense at all.
As long as I'm complaining again, I want to ask, "Why can't you type in "Disk Manager" in the search on the Metro screen and find "Disk Manager".
Half of the problem with Windows 8 is that they changed the name on things that have been the same for years.
Anyway both computers now have Windows 8 generated Disk Images and I feel better. LOL
I still have my third party image as well. BSTS
How Often Do You Create a System Recovery Image?
View 9 Replies View RelatedIn Windows 8 Home (the edition that came with my Dell XPS) there is no option to save System Image to Network, only to Disc or HD.
Is this feature missing from 'Home' version only and is the option to save to Network available in Windows 8 Pro like in W7?
If so what is the best and cheapest way to upgrade (officially, not via torrents) to Windows 8 Pro?
I am trying to get a handle on how these 2 functions are related. I assume the Recovery disk would be needed if you can't boot to the computer (assume the OS needs to be present) and does the Recovery disk replace the boot files that may be damaged and then after you get booted up I assume the System Image (is that is referred to as a "backup")?? would be ran to get the computer back to the working order when the Image was taken. Assume that the Recovery disk would take place of the OS installation disk if it were not available and you couldn't just reinstall the OS and so you could load the Image.
View 3 Replies View RelatedIts my first time to create my first system image in my windows 8. Can I exclude a certain file if not how many blank cd's do I need I got 146GB used currently in my C drive and while creating a system image could it take the process an hour or more?
View 4 Replies View RelatedTrying to create a System Image Backup on a Windows 8.1 ACER laptop. My latest attempt is to a external hard drive with 3.63 TB free but the backup fails due to not enough disk .
I have attached the full error message.
New to the ways of Windows 8 and this is my first time trying to create a System Image Backup.
I'm attempting to follow the instructions here, to do a system image of my Dell Windows 8 machine:
Using Windows 8′s “hidden” backup to clone and recover your whole PC | Ars Technica
As I go through the wizard, I arrive at this screen:
I don't have the option to deselect any of these "drives". I proceed with the backup - it chugs along, and then consistently fails here:
"One of the critical volumes is not having enough free space." It doesn't tell me which - but, it's certainly not the OS drive, this is a virgin system.
So I was just about to create a full system image of one of my HDD's, and I noticed that I have 2 different "system" drives.
My main system drive is the C: Drive, which is the 111.79gig HDD. Im not really sure why the 1TB drive is listed as a system drive, as well as being drive 0. Is there any easy way to fix this so everything to do with the system is back on the 111.79gig C: drive where it belongs?
My system crashed yesterday. I am trying to recover my image. I boot from the recovery CD that I created when created the system image. The system image is stored on an external hard drive. When I try to recover the image it comes up with an error "Network path not found error 0x80070035". I have shared the folder, I have tried everything that I can think of to fix this.
View 9 Replies View RelatedI own an OEM Machine which is from Acer.
To ask what is probably well known amongst IT pro's; does a system image backup solution (and consequently a restore from that image if needs be) work on OEM PC's, like a desktop from Acer, actually work without problems, and would I get a proper bootable and working machine after restoration.
Brief scenario - I have used Acronis TI 2014 (Or even the Windows 8.1 system image utility) to create an image of my C: Drive/EFI Partition/Recovery Partition - and backed it up to an external USB HDD.
My OS crashes for whatever reason and I can't boot.
I then either use my Acronis bootable media CD (which I've tested and boots despite all the secure boot/UEFI/GPT mania going about users like myself) to reinstall the Acronis disk image.
OR I use a Widnows 8.1 bootable disk with the ISO (which I've tested to boot) to reinstall the Windows created system image. (I could also use the recovery drive I created in Win 8.1, which just to add, however irrelvanat it might be, includes my OEM factory default partition which was copied as part of the recovery flash drive creation)
Would either of those restore solutions give me a reasonably likely working PC again - taking into account all the stuff I don't understand like the Windows 8.1 OEM key being on the motherboard (which I would understand in terms of Windows activation and authentication could have a negative impact on restoring images over an OEM installed OS and it's partitions)....
I have read a lot about windows 8 (and 8.1) and how to make a system image for it.
Well the most people used the 7 file recovery tool in windows 8 to make full system images. But in windows 8.1 it's gone.
Like in this thread: System Image - Create in Windows 8
Now I hear and see everyone making system images with a powershell command.. How to Create and Restore System Image Backups on Windows 8.1
But why doesn't anybody just use the windows 8 (and 8.1) backup function wich also includes a feature called:
include a system image of drives:
It seems to me that if you do this at an clean install it's a lot easier then powershell? (and maybe you can uncheck the backup of files and only include a sytem image?)
I know that at this moment I can still make a 7 file recovery tool image and restore it with windows 8(.1) repair/recovery disc.
But I wan't to know this for the future when I have a system with 8.1 from factory.. (some manufacturers like asus don't provide repair/system restore discs or utils anymore....)
I need to change the schedule I have already created for a System Image Backup. How do I get into schedule settings to change it?
View 3 Replies View RelatedI made a system image from Windows 8.1 using Windows' own system image feature. I seem to be unable to restore it. I booted with the Windows 8 disc, and told it to restore from a system image. It found the image, ran a few minutes, then failed because of version mismatch (?). Not before hosing the entire system, by the way. Luckily, I was well backed up.
I booted with the Windows 7 disc, and it didn't even see the system image (on my external HD). It saw my Windows 7 system image and restored it just fine, and here I am.
Anyway, is there some trick to restoring a Windows 8.1 system image? I am not running Windows 8.1, so I can't generate a repair disk that way. Is there one available online somewhere for download?
I plan to get a ssd drive and run only windows with few other most useful software on it.
I transfer only windows 8 system with system settings. can I make a image of windows system only, not whole hard drive? and how to backup activation. the windows 8 I have is a upgrade license I brought from Microsoft upgraded my existing windows 7.
I have been trying to a system image (Windows 8) and keeps telling me to insert a blank disk and mark it, Computer Name, Date and Disk #. It keeps telling me to install one and mark it #1 every time the current disk (DVD) is full, also the status bar does not show any advancement in the process. The other 2 machines I have and did a system image on asks you to insert a disk with the numbers going in sequence, 1, 2, 3 etc.
View 9 Replies View RelatedWhen I selected "windows file recovery" from the control panel and tried to create a system image, I received the error msg "0x81000033"
"not enough space on target drive to create image", but that was not true... the target disk had 1.2TB empty space...
I have a brand new Dell XPS 8500 with Windows 8. I did my initial software load and wanted to create a system image. The image fails with error code 0x80780119. This is the sequence I ran:
1) Control Panel
2) Windows 7 File Recovery
3) Create a system image
4) On a hard disk (External hard drive selected with 1.36 TB free space)
5) Program states that the following drives will be backed up without allowing me to add or remove drives (EFI System Partition, OS(C:)(System, and WINRETOOLS(System). I hit "start backup"
6) Create a system image box opens and it starts to run the process and then errors out and says the backup failed. The error message says there is not enough disk space to create the volume shadow copy on the storage location and it lists error code 0x80780119.
I believe it's not a problem with the destination drive where the final system image will be created. It has to be a problem with one of the partitions on the one and only hard drive inside the machine. Using Disk Management I can see the following partitions on the harddrive:
500MB EFI System Partition
40MB OEM Partition
500MB Recovery Partition
1854.75GB NTFS
7.12GB Recovery Partition
Here is my situation:
-I have now installed and using two sata hard drive (Drive C "500GB" for OS and other programs and Drive D "1TB" for Games and other Documents)
-I also have SYSTEM IMAGE created before and saved it on my external hard drive.
Now I want to RESTORE that SYSTEM IMAGE saved on my external hard drive to the Drive C "500GB"
My asking is HOW TO DO IT CORRECTLY:
>Should I disconnect/unplug the SATA Cable for the Drive D 1TB before I proceed with the system image restore?
(By the way I have no problem with the procedures on how to do the system image restore)
>OR is there a RISK if I just continue with the system image restore with both SATA CABLES for both HDD not removed?
I need creating a recovery image of my system. I would like to create an image recovery drive with just the barebones needed for Windows 8 to run. I all ready have a recovery partition created. I just don't know how to create a recovery image for usage whenever something happens to the system.
View 1 Replies View RelatedI recently got myself into a quandary. I installed 4 additional drives with the intent of creating a RAID volume that's supported by the BIOS. In order to do that I must change the BIOS setting for the controller which includes all volumes including my boot drive (which I don't intend to RAID.) The problem I have is that when I switch the controller from UEFI to RAID, Windows Recovery will not use the System Image that I made. It says the volume was created under a different setting (Bios vs. EFI).
What are my options? Is there a different backup setting that will preserve all my installed software? I'm not concerned about data which I can copy to an external volume but it would take several days to get all my software reinstalled. I'd like to avoid that. I assume I will have to reinstall Windows 8.1 Pro and then use a backup program to restore everything else. If that's the case, then I need to know which backup program will work. If there's a better way, I'd love to know. I see my options as either, get another backup program, get a separate controller card for either the boot drive or the RAID volume, or reinstall everything.
I have spent most of the past 12 hours trying to restore my win8pro system from a system image. the image was saved to a usb hard drive. win8pro system image recovery won't see the usb hard drive. I tried copying the backup to a drive on my network, but recovery won't see that either, even when entering the exact path to the backup using the network option. I then tried to copy the backup to a second hard drive, installing that hard drive directly into the machine. no go, wouldn't even recognize the drive.
View 9 Replies View Related
