I had a windows 7 laptop which finally died but before it did a made a system image backup to my external hard drive so I have all the files. How do I load that onto my new windows 8.1 laptop so I have all my files there?
View 4 RepliesRecently i upgraded my system to windows 8..N after clean install i backed up the copy of my C drive (Includes System Image) to my external 2TB Hard Drive.. It took around 250GB of hard drive space..Now since i am running out of space i decided to delete the back up copy from My hard drive.. I deleted WindowsImageBackup and all associated files using control panel..But around 150GB space is missing(not visible) from my external Hard Drive..
As You can see from attached pic that 125 GB free out of 1.81TB..But size of all files including hidden files is 1.53TB..
Win 8.1 ProThe system allows system image backup done on either external hard drive ( which I do every week ), or on DVDs. Why it does not allow USB flash drive ? I tried to use a 32 GB flash and it refuses to do backup on it.
View 11 Replies View Related I am having problems with system imaging my Windows 8 machine to an external hardrive via a usb (??) cable.
First, as mentioned in another thread is the exceptionally long time. The external drive is a WD 1TB BTW. I have two older hardrives on the computer. Just installed the second, which at this time is not being used. Trying several several programs, Paragon Free, Easeus, Macrium Reflect and the built in Windows Backup I was getting 14 hour estimates.
The actual issue I wish to resolve is that during a over 9 hour backup of the primary drive with approx. 34GBs, I noted what appears to be a folder with the Windows backup icon called the name of my computer on my external drive. It contains approximately 3GBs of data in multiple folders. Windows backup is turned off. I did not have this file on the external hardrive and I didn't initiate the OS to perform this. It showed no indication of running and occurred during the Macrium backup.
I created some windows 8 system images(Using the internal system image tool). Now I find restore points more useful, but I would have to turn the system protection on for an external hard drive. The problem is that I don't understand the sophisticated message Using system protection on a drive that contains system image backups will cause other shadow copies to be deleted faster than normal. Does it mean, that under some circumstances my manually created full system images could be deleted to create a restore point? I would like to keep the system images. Also, I hope it doesn't override existing directories on this harddrive, but I don't want to try it out without being sure.
View 1 Replies View RelatedMy Seagate Portable Drive seems to work as the green light comes on.
Screen shot of my Disk Management below. Am I missing something?
Other solutions have been to right click and assign a drive, but those listed below other that the C: don't allow.
Using OS Windows 8.1
I have a 2TB Western Digital My Book Essentials, it's filled with tons of old photos, movies, docs, games, and I'm scared to think of what else. The SATA to USB connector broke on it, so I took the drive apart and put it inside my computer. I opened up device manager because it wasn't showing up automatically and the 2TB is showing up as unallocated, I'm freaking out now because I'm scared the data was somehow deleted.What do I do?
edit: I realize also this isn't directly related to Windows 8 (besides the fact it's the OS I'm on), but I don't know where else to post it. I'd also like to say that I had a really deep feeling the drive was going to break continually for about two weeks before it happened, so if you have a similar feeling about something, don't ignore it!
A few months ago my laptop broke and it needed repairs. The HDD was replaced and i got my laptop back with one new HDD inside and one "broke" HDD in a bag. Later the "Repaired" Laptop crashed again so i bought a new one and took the HDD out of the old laptop. I bought a HDD case with USB connection and both of the HDD's where intact. The oldest HDD contained windows 7 and the replaced contained windows 8. Now i want to sell the Windows 8 HDD so i want it to be clean of personal files but i want it to keep windows 8. I thought the solution was to run the windows 8 on the HDD so i can use the program deletation program of that windows 8. The problem is i dont know how to run windows 8 of a hard drive. I have searched the internet but with no success.
View 3 Replies View RelatedMy wife just got a new PC running Windows 8.1 Pro and she wants to re-connect her external hard drive that has all her game files on it to the new PC.
While the new PC recognizes the drive it states that it needs to be initialized , doing so would wipe the data currently on the drive which would be unacceptable. How to get the new PC to recognize this drive and its data?
I've been dual-booting Windows 8 Pro and Windows 7 Ultimate, but a while back my Windows 8 kind of went "South" and wouldn't boot at all (I got an error message that a device was "not attached"). I have a recent system image on an external USB hard drive, but when I boot to "system recovery" using my repair disk it can't seem to find my USB drive at all.
The tutorials here mention installing a SATA driver to access disks that are not recognized, but this doesn't seem to be the case.
I successfully managed to create a virtual hard drive on my external drive to try boot windows 8 off it. I managed to boot it up and the login screen also appears as normal. I have a successful login, But on the second time login I am faced with black screen and the cursor. I'm aware that Microsoft has released a fix for this. I have attached the executable in the zip. I tried running this fix but it didn't work . After the black screen appears, even in safe mode I cannot run explorer.exe or open any folder to try running any executable files
View 2 Replies View RelatedI created restore disks for my new laptop. It gave me the option of using a USB drive, but I chose the option to create DVD disks instead. This went fine up until disk 6. I was able to finish, but the system has a problem reading the 6th disk. I cannot recreate the disks because HP, for some reason, made it so you can only do this once. I want to recreate the image on an external USB drive. Is there any way around this? HP will sell me a recovery set, but apparently only on disks.
View 3 Replies View RelatedI have bought a 2TB western Digital external USB3 hard drive and installed the Asmedia drivers but windows never picks it up. See the screen capture. The drivers are the ASMedia USB 3 host controller but it seems to show up after a few seconds as USB Root Hub (xHCI) with a triangle. I have tried updating from there and directing it to the drivers and uninstalling and then reinstalling and the drive shows up long enough to copy but then disappears again.
I literally have run out of options.
It seems to be a common theme on the web and especially with Western Diital drives although I think it is windows struggling to recognise them and implement correctly.
HP Envy dv7, Windows 8
Seagate 2TB drive mounted in a Thermaltake, Max 5 enclosure. The drive does not show in Windows 8. Does show when running Disk Management (diskmgmt.msc) but shows as "Unallocated" without a drive letter. If run the Seagate drive tools, it shows up as unallocated, with drive letter "C". But there is obviously already a drive "C".
Disk Management does not present a means by which to assign a drive letter
I know there is good software out there to clone/image my hard drive and restore it to a new SSD drive. I'm just wondering though, since my laptop is brand new, I made a full recovery to a USB drive and included the OEM recovery partition.
Couldn't I just swap out the old HDD with the new SSD and boot with the recovery stick and do a full recovery back to the new SSD?
Also, however I do this, recover or image backup/restore, do I need to do some type of SSD alignment? I can't find a clear answer on that.
I'm currently using a Dell Inspiron 3520 laptop with Windows 8 on it. I have an external hard drive from a Windows 7 desktop. It recognizes the external hdd right away and I can access it but I can't figure out how to boot Windows 7 as the primary. I've tried changing boot order in bios but I've had no luck as it still boots Windows 8 first. Is there a way to use the Windows 7 as the primary drive ? Even a way to temporarly turn off the Windows 8 hard drive will work. I just need to access the Windows 7 hard drive without having to navigate through program files to have to open something.
View 9 Replies View RelatedCan i install windows 7 or 8 to an external hard drive so i can take it to another computer, select it from the boot menu and it will boot up?
View 7 Replies View RelatedI have two USB 3.0 ports on the front of my Dell XPS 8500 Dell desktop. Once again I have caused the USB 3.0 eXtensible Host Controller to stop working because I did not disconnect the external hard drive before shutting down, it seems. It reminds me of leaving in a floppy drive but at least the computer would not boot in that circumstance. Now, there is no warning whatsoever. Dell technical support's answer is to refresh or reset the machine.
Any way that would be less time-consuming than having to reinstall all of my applications.
I have an external hard drive connected to my PC via hard drive dock on USB 3.0 port. Whenever I turn my PC on with the hard drive connected, my PC won't boot up because it is trying to boot up from the external hd where I have an image of both my Win 7 & Win 8 OS. How can I stop my PC from booting up from the external hd?
View 9 Replies View RelatedI recently purchased a WD 1TB external portable hard drive.When I first got it it was immediately recognised by my laptop (a 2 day old Asus Ultrabook S400C). This is my first time with Windows 8 so I am still learning to navigate it.
The first thing I did was transfer 650gb of movies and music across. I didn't format the hard drive first, maybe that was my first mistake. My files were still recognisable on my laptop and my WD TV Live media centre. The next day all of a sudden my media player wouldn't recognise it and when I plugged it back into my laptop it also cannot see it.
The device can be seen in device manager (when I click on properties it says it's working corectly), but not in the drives list in my computer. It is showing as "Disc 2" 'Not Iniitialised' and when I click on 'Initialise' and choose 'MBR' and hit OK it comes up with this error msg: 'The request could not be performed due to an I/O device error'.
My old Sony Vaio broke the other day, so I've just got a new laptop. The Vaio was Vista, but now I'm on Windows 8.
I'd been backing up my Vaio to an external harddrive, but all I ever did was run the backup and let it get on with it. So for example, within the external harddrive now it just has a list of the dates I ran a backup, followed by 'Backup files 1', 'Backup files 2' etc. I'm hoping these include some of the documents/files I had on there, but I can't be sure. What exactly will have been backed up here?
I've been trying now to restore these files on my new laptop, but I can't seem to find a way. Is it possible?
OS: Windows 8.1 Pro x86 WMC
External Hard Drive: Seagate FreeAgent GoFlex (No external Power Required)
Problem: I can't access my External Hard Drive.
See The Screenshot Below.
Solution Applied:
Drive letter changed. (Not Worked)
Also tried Properties - Security - Advanced - Owner to Everyone. (Not Worked)
Checked the HDD in another PC Windows 8.1 x64. (Not Worked)
I connected the HDD then I installed the "Better-Explorer" through that i can access my external hdd normally but If I Reboot my PC then same Problem with the "Better-Explorer". & If I install The "Better-Explorer" Then if I connect my HDD Then from the beginning i can't access the HDD.
In Tune-Up Utilities Their is Disk Explorer through that I can explore my Ex HDD Drive. I right clicked on my drive from Tune-up & checked the disk for error and then repaired it (Windows Error checking tool) and then reboot my PC but it is still the same.
I want to reformat the hard drive in Windows 8 - Factory Image - in an HP Notebook computer.
HP sent me 3 disks.
I just installed Win 8 last night and everything seemed fine before I turned off the computer. Now, I'm a student and I work a lot from my USB/HD. I have both my usb and HD connected to the computer but the computer doesn't read them now.
View 8 Replies View RelatedI just installed Windows 8. I used to have Vista. With Vista I could connect my Seagate external hard drive and then find the Backup function and create a backup. How would I do this with Windows 8?
View 3 Replies View RelatedMy portable hard drive stops showing up all of a sudden. It is connected to a USB hub. When I go to 'Disk Management' in 'Computer Management', the hard drive shows up as Unknown - Not Initialised. Also this hard drive works while not using the USB hub, and the USB hub works as well with other devices.
View 9 Replies View RelatedIs there a way I can back up my files from my 2tb WD My Passport External Hard Drive? I have a lot of files on there which I want to back up and convert to NTFS.
View 5 Replies View RelatedI'm running Windows Server 2012 R2 on a Dell Poweredge R310. I just bought a G-RAID 8TB external USB 3 hard drive. I plugged the hard drive in and when I switched it on the computer crashed.
I didn't notice right away since the computer is headless. But when I got back to my desk I noticed the computer was rebooting. When it fished POST it gave me some warning about IRQL_NOT_LESS_EQUAL and rebooted again.
I removed the USB drive and now the computer is running fine.
I am trying to to back up my files, using file history, but the program will not recognize my Iomega portable hard drive.
I keep getting this error message every time I try to back up the files.
"File history does not recognise this drive"
There doesn't appear to be any problem with the Omega as I have copied my files to this and double Save when modified.
It seems this problem has been around generally for a long time now as W8.1 search turns many pages on this and I have tried several of the suggestions without success.
I have a Simpletech Simpledrive External Hard drive. It works on my desktop running xp. When I connect to my Asus N56DP Laptop, I hear the binging and all. But I do not see it in my control panel. I can see it in the device manager. Not in Disc MAnagement. Is there something I can do to get it to install and be accessible? I have some race car pictures I would like to post to Facebook.
View 1 Replies View RelatedI am reading up about optimizing of SSD drives and I'm seeing that Windows 8 is supposed to be pretty good with automatically deciding whether to optimize or defragment drives based on what they are (SSD vs HDD). But I have a problem. I just bought an SSD but under the Optimization menu it is showing up as a Hard Drive.
It's a brand new Samsung 840 EVO 500GB and I'm going to be using it solely for music and movies as an external drive. I also bought an Anker external SATA III to USB 3.0 enclosure. I have the drive recognized and everything under the File Explorer but I'm just a little nervous that it's listed as a Hard Drive under the Optimization menu. How can I get Windows to see that it's in fact an SSD?