When I selected "windows file recovery" from the control panel and tried to create a system image, I received the error msg "0x81000033"
"not enough space on target drive to create image", but that was not true... the target disk had 1.2TB empty space...
After doing some digging around I found the system image backup under windows 7 file recovery. Then I go to create system image and everything goes fine and then I get an error message after about half way through the back up . Error message will say something like not enough space on drive to create image and I am doing this on a 2TB external hard drive . I did notice one time I accidentally created 500 MB of unallocated space on this drive but I was getting this this error message before I did that and I am not even sure how I created it. I have another PC with windows 7 and don't have a problem with the scheduled image and data backups being performed weekly. Had this problem with windows 8? Also how do eliminate the 500 MB of unallocated space on my 2 TB External HD which is not really a problem but should not be there . I have my files backed up on this HD although I don't use windows data back up utility which I prefer Sync Back to perform instead .
View 11 Replies View RelatedMy system is dell xps 8300. I have upgraded from windows 7 ultimate(64bit) to windows 8 pro 64 bit. My system has
1) dell oem partition (no drive ketter 39MB),
2) recovery partition (ntfs no drive letter) 13.25 GB free 2.94 Gb,
3) C drive windows system partition 100Gb free 31,24 GB rest of the two partitions are 175 Gb each (logical drives).
Total my hard disk capacity is 500GB.
What is the difference of taking backup and which is better for recovering the system to original state just before the backup.
1) System image backup(recovery partition & windows system partition) using windows 8 system backup..ie using
windows 7 file recovery menu under control panel.
2) Creating custom recovery image for refresh.(command: recimage -CreateImage)
I have done both and my backup location is external hard drive of 2TB capacity. I made system recovery disk(dvd) from the windows 7 file recovery menu.
The custom recovery image wim file is of size 22.GB
The recovery partition backup(vhdx) is of 9GB and the windows system partition backup is of 43GB.
I have also used macurium reflect pro to take backup of my recovery and windows partition using macurium rescue cd.
I have a brand new Dell XPS 8500 with Windows 8. I did my initial software load and wanted to create a system image. The image fails with error code 0x80780119. This is the sequence I ran:
1) Control Panel
2) Windows 7 File Recovery
3) Create a system image
4) On a hard disk (External hard drive selected with 1.36 TB free space)
5) Program states that the following drives will be backed up without allowing me to add or remove drives (EFI System Partition, OS(C:)(System, and WINRETOOLS(System). I hit "start backup"
6) Create a system image box opens and it starts to run the process and then errors out and says the backup failed. The error message says there is not enough disk space to create the volume shadow copy on the storage location and it lists error code 0x80780119.
I believe it's not a problem with the destination drive where the final system image will be created. It has to be a problem with one of the partitions on the one and only hard drive inside the machine. Using Disk Management I can see the following partitions on the harddrive:
500MB EFI System Partition
40MB OEM Partition
500MB Recovery Partition
1854.75GB NTFS
7.12GB Recovery Partition
I've been dual-booting Windows 8 Pro and Windows 7 Ultimate, but a while back my Windows 8 kind of went "South" and wouldn't boot at all (I got an error message that a device was "not attached"). I have a recent system image on an external USB hard drive, but when I boot to "system recovery" using my repair disk it can't seem to find my USB drive at all.
The tutorials here mention installing a SATA driver to access disks that are not recognized, but this doesn't seem to be the case.
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
I want to know that what OS is included in factory image that made after upgrading from windows 8 to 8.1 (Factory image can be made using "My dell backup and recovery" application )
View 1 Replies View RelatedSo when I was using Windows Vista I used Acronis True Image, when windows 7 came along I use macrium reflect, now I am using windows 8.
don't know what to try or use this time. I have three hard drives one for my OS, one for media+installation of programs and lastly one for backups. I want to make a system image in case something goes wrong save me the hassle of reinstalling and downloading again?
have our friends computer all set up and ready to go.One of the things that came about during this process is, I learned that you can make a real disk image in Windows 8 without using a third party software program.
Something I didn't think was possible, and you don't have to jump through hoops to do it.
As "Badrobot", pointed out to me.
There is a utility in the Windows Control Panel named Windows 7 File Recovery, (the strange name is probably why I never figure out what it does) It is really the Disk Image utility from Windows 7 and will make a Disk Image of the C: drive on your Windows 8 computer, and has nothing to do with recovering Windows 7 files, as far as I can see.
Why they didn't include this option in Windows 8 Recovery is a mystery.
Anyway the utility is really easy to use, makes a backup very quickly, and also creates a Windows Boot disk that will take you to the recovery interface if your computer won't boot or go to the Recovery Screen.
I haven't actually checked but it says that the option to restore you computer from a Disk Image will now, be available when you open the System Restore Windows along with the Refresh, and Restore options.
[URL]
On the laptop I'm setting up, I created a new partition just big enough to hold the image and placed it there. On my computer I placed it on a different physical drive so that it will work even if my hard drive dies.
So I have to admit that I complained about Windows 8 not having this capability in error, but I still say that it's Microsoft's fault for hiding it in a location that I never expected to find it, under a name that makes no sense at all.
As long as I'm complaining again, I want to ask, "Why can't you type in "Disk Manager" in the search on the Metro screen and find "Disk Manager".
Half of the problem with Windows 8 is that they changed the name on things that have been the same for years.
Anyway both computers now have Windows 8 generated Disk Images and I feel better. LOL
I still have my third party image as well. BSTS
Its my first time to create my first system image in my windows 8. Can I exclude a certain file if not how many blank cd's do I need I got 146GB used currently in my C drive and while creating a system image could it take the process an hour or more?
View 4 Replies View RelatedI'm attempting to follow the instructions here, to do a system image of my Dell Windows 8 machine:
Using Windows 8′s “hidden” backup to clone and recover your whole PC | Ars Technica
As I go through the wizard, I arrive at this screen:
I don't have the option to deselect any of these "drives". I proceed with the backup - it chugs along, and then consistently fails here:
"One of the critical volumes is not having enough free space." It doesn't tell me which - but, it's certainly not the OS drive, this is a virgin system.
I own an OEM Machine which is from Acer.
To ask what is probably well known amongst IT pro's; does a system image backup solution (and consequently a restore from that image if needs be) work on OEM PC's, like a desktop from Acer, actually work without problems, and would I get a proper bootable and working machine after restoration.
Brief scenario - I have used Acronis TI 2014 (Or even the Windows 8.1 system image utility) to create an image of my C: Drive/EFI Partition/Recovery Partition - and backed it up to an external USB HDD.
My OS crashes for whatever reason and I can't boot.
I then either use my Acronis bootable media CD (which I've tested and boots despite all the secure boot/UEFI/GPT mania going about users like myself) to reinstall the Acronis disk image.
OR I use a Widnows 8.1 bootable disk with the ISO (which I've tested to boot) to reinstall the Windows created system image. (I could also use the recovery drive I created in Win 8.1, which just to add, however irrelvanat it might be, includes my OEM factory default partition which was copied as part of the recovery flash drive creation)
Would either of those restore solutions give me a reasonably likely working PC again - taking into account all the stuff I don't understand like the Windows 8.1 OEM key being on the motherboard (which I would understand in terms of Windows activation and authentication could have a negative impact on restoring images over an OEM installed OS and it's partitions)....
I have read a lot about windows 8 (and 8.1) and how to make a system image for it.
Well the most people used the 7 file recovery tool in windows 8 to make full system images. But in windows 8.1 it's gone.
Like in this thread: System Image - Create in Windows 8
Now I hear and see everyone making system images with a powershell command.. How to Create and Restore System Image Backups on Windows 8.1
But why doesn't anybody just use the windows 8 (and 8.1) backup function wich also includes a feature called:
include a system image of drives:
It seems to me that if you do this at an clean install it's a lot easier then powershell? (and maybe you can uncheck the backup of files and only include a sytem image?)
I know that at this moment I can still make a 7 file recovery tool image and restore it with windows 8(.1) repair/recovery disc.
But I wan't to know this for the future when I have a system with 8.1 from factory.. (some manufacturers like asus don't provide repair/system restore discs or utils anymore....)
I made a system image from Windows 8.1 using Windows' own system image feature. I seem to be unable to restore it. I booted with the Windows 8 disc, and told it to restore from a system image. It found the image, ran a few minutes, then failed because of version mismatch (?). Not before hosing the entire system, by the way. Luckily, I was well backed up.
I booted with the Windows 7 disc, and it didn't even see the system image (on my external HD). It saw my Windows 7 system image and restored it just fine, and here I am.
Anyway, is there some trick to restoring a Windows 8.1 system image? I am not running Windows 8.1, so I can't generate a repair disk that way. Is there one available online somewhere for download?
I plan to get a ssd drive and run only windows with few other most useful software on it.
I transfer only windows 8 system with system settings. can I make a image of windows system only, not whole hard drive? and how to backup activation. the windows 8 I have is a upgrade license I brought from Microsoft upgraded my existing windows 7.
I have been trying to a system image (Windows 8) and keeps telling me to insert a blank disk and mark it, Computer Name, Date and Disk #. It keeps telling me to install one and mark it #1 every time the current disk (DVD) is full, also the status bar does not show any advancement in the process. The other 2 machines I have and did a system image on asks you to insert a disk with the numbers going in sequence, 1, 2, 3 etc.
View 9 Replies View RelatedI need creating a recovery image of my system. I would like to create an image recovery drive with just the barebones needed for Windows 8 to run. I all ready have a recovery partition created. I just don't know how to create a recovery image for usage whenever something happens to the system.
View 1 Replies View RelatedI have spent most of the past 12 hours trying to restore my win8pro system from a system image. the image was saved to a usb hard drive. win8pro system image recovery won't see the usb hard drive. I tried copying the backup to a drive on my network, but recovery won't see that either, even when entering the exact path to the backup using the network option. I then tried to copy the backup to a second hard drive, installing that hard drive directly into the machine. no go, wouldn't even recognize the drive.
View 9 Replies View RelatedI'm having a problem with Windows System Image Backup just when I try to do a image backup it will say that it has failed and suggest to do a disk check. I've searched and some users say to use third party backup programs should I run the disk check first or just go with a different backup tool.
View 1 Replies View RelatedI bought a new laptop with a Windows 8 Pro x64 pre-installed on it.
Then I upgraded my OS to Windows 8.1 Pro from Windows Store.
After that I thought I'd create a backup of my system so I don't have to re-download the Windows 8.1 upgrade and at the same time having the option to reset my laptop to it's old operating system in case I want to, so that being said, I created a system image backup using Windows' Imaging Utility and pointed it my external drive. It took a couple of minutes and the image was successfully created.
I double checked the image file and I can see it on my external drive saved in a folder called 'WindowsImageBackup'. The backup files is approximately around 35 GB.
I also tried using the System Image Recovery option from BIOS to check whether the backup file I created really works, and it did because it was recognized by the system through the dialog box "Re-image your computer".
My mind was set that if anything bad happens to may laptop, whether if it got infected with a virus or the operating system crashed or even if the hard disk gets broken I could simply put it back to it's previous state using the backup image I created. So I played with the partitioning of my laptop, I even installed other operating systems for educational purposes, but when I finally wanted to bring my laptop to its previous state I failed...
The System Image Recovery from BIOS that once recognized my backup image throw an error at me saying the 'Windows cannot find a system image on this computer'. How can I fix this error? Is there still a way to recover my laptops previous installed OS or is it gone for good?...
1. Download bootable USB 3.0 drivers and tried to load the drivers on the during System Image Recovery. I think I got that tutorial here in this forum also but not sure, anyways it says that my external hard disk might not properly load because windows does not support usb 3.0.
2. I tried installing macrium free to re-image the vhd files from my backup image and tried to use the new image created by macrium to backup from. Re-imaging and backing up from the macrium image is successful but when I restart my laptop to check whether the backup works, I got an error saying 'Your PC needs to be repaired... Error code: 0x0000225'. I boot from my rescue disk and open up the command prompt to run a command like 'bootrec /scanos' but the result says detected windows installation is zero (0)...
After upgrading to the Win 8.1 upgrade I can no longer find the full backup selection and clicking on the change backup settings only shows a little clock. Has the backup function been removed from win 8.1?
View 8 Replies View RelatedI thought 8.1 was supposed to make things easier? Not so for creating a System Image. Now, you have to use the Windows PowerShell (Admin) to get the job done. The image below will show the command string to use (boxed in red) and my target drive is/was Z:
Attachment 23893
Zoom image to enlarge.
You can use your installation media to access the Repair function and restore your System Image from there.
I just bought a new Gateway that came with Windows 8, and the partition is GUID (GPT), so I am unable to use TrueCrypt for full-disk encryption. I wanted to change the partition, but the computer didn't come with a Windows 8 disk. All I have is a system image disk set that I created when I first set up the computer.
Can I open up command, change the partition table from within Windows, then restore the computer VIA system image? Will I need to get another drive first, or hook the current drive up to another computer and change there?
How might I go about changing the GUID to MBR without ruining the OS, because I don't have an installation disk for Windows 8.
After upgrading to Windows 8.1, System Image Backup failed resulting in the following message:
"The backup failed. There is not enough space to create the volume shadow copy on the storage location. - (0x80780119)"
However, there was enough free space in the external hard disk: 762.82 GB.
Windows Disk Management, and other tools, provided the following information about the partition structure of Disk 0 (238.35 GB):
Type File System Capacity Free Space Recovery NTFS 499 MB 499 MB
EFI System Partition FAT32 300 MB 300 MB Microsoft Reserved Partition Other 128 MB
Recovery (?Volume{792d...) NTFS 350 MB 350 MB Recovery (?Volume{8b75...) NTFS 350 MB 350 MB
Recovery (SAMSUNG_REC2) NTFS 19.72 GB 19.72 GB Recovery (SAMSUNG_REC) NTFS 1.00 GB 1.00 GB
Boot, Page File, Crash Dump, Primary Partition NTFS 216.16 GB 144.76 GB
I am suspicious about having two 350 MB recovery partitions.
I recently upgraded to Windows 8.1 from the Microsoft Store. Everything went well (so far) and I want to create a system image backup.
I have a 1 TB external hard drive with plenty of space, but there are some mp3 files on it. I'd like to know if storing the disk image on this drive will affect the mp3's (i.e., are they safe?)
On my friend's Dell Inspiron laptop, Windows 8 will not boot. I want to boot to the repair disk to restore an image I had created. F12 on boot does not show the DVD drive as an option. I went into Setup/Boot and disabled Secure Boot, still did not show the DVD as a boot option. I went back to Setup and selected Boot List Option>Legacy. Now it shows the DVD drive as an option to boot. I booted the repair dis, went through all the dialogs to select the image I had created, but when it goes to restore it it says it cannot because the image was made in UEFI, and it is now set for BIOS.
I went back into Setup/Boot and I see that the option Load Legacy Option ROM is now Enabled, it did it on its own. As a test I set it back to the defaults and re did it as above, and again it automatically changes Load Legacy Option ROM, which I assume is what is creating the problem.
So my question is what do I need to do to boot from the Windows Repair Disk?
I have a XPS 8500 with preinstalled windows 8. I tried to install Ubuntu 12.10 on it. When I partitioned the disk, I accidentally format the whole disk. Then I could not restart to Windows 8. I didn't make any backup or recovery media. How to restore factory image?
View 5 Replies View Relatedhow to image win 8 onto a thumbdrive. I counldn't find nay program in the system to do it. is there a dell data safe program in it ?
View 2 Replies View RelatedI set up Windows 8 Consumer the way I like it -- had to create a custom inf for the screen of my Dell Mini 10 among other things.
I then created a system image on another computer on my network.
Next I wiped and reformatted the disk in the Mini.
But now, when I try to restore from the system image on the network, Windows 8 can't see or recognize the backup. I can browse to the location on my network perfectly well, but no matter what folder I browse to, from the drive letter of the backup drive to the folder named "Backup 2012-03-14 015251," I keep getting a message that there is no image there.
My windows 8 pro install messed up n i have almost 2.8tb of stuff on my drive on a 3tb hd. I have an identical hd as a backup which i have (an apparently successful) a backup of my system from a couple of weeks ago on. I had set the system to do scheduled backups of the system (set to backup a system image of efi partition and c. There were a few times where i was trying to get other things done and the systemwas running slow so i cancelled the backups when i noticed them running. The software stopped the backups (seemingly successfully).
As i say my system messed up - i came home to find out it was no longer downloading (as i had left it doing when i went to work) but was on a blue screen (bsod?) saying the system needs to be restarted. Since then it didnt work well at all and after dskchk reported that several sectors were damaged so it was moving data to spare sectors (or whatever it generally reports when this happens) there were a lot of files messed up or reported as deleted when doing a file recovery scan with recuvva.
So i decided to restore the backed up system image from the other hd. Incidentally i tried mounting the vhdx backup image from that hd via windows explorer which then reported "the disk needs formatting" and didnt get any success mounting via disk management either (it mounted in the app but didnt show up on windows explorer and if i tried to access info on it via disk management it reported the same"disk needs formatting prompt".
So when i booted my win 8 dvd it didnt work cos the dvd wasnt an efi booting version so i had to boot from a usb version with the efi bit included.
I formatted the system drive and chose to do an image restore. It started doing the restore (apparently) but every time i came back to it later i had the follwing error:
"Re-image your computer
The system image restore failed.
Error details: The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria Ox80073B92"
It took me so long to set up my system n i have a lot of my own data on there too. The system drive I formatted was created in diskpart and then re formatted with "format" command (as it created the disk in raw mode) so now it is ntfs mode (uncompressed).
I have a laptop that runs Windows 8 (64 bit), and the hard drive is apparently a dynamic (as opposed to basic) disk. My problem comes when I try to make a backup image of my active drive. I know a lot of backup software has troubles making an image of a dynamic disk. Now after researching, I know that Windows 8 comes with its own imaging tool, "Windows 7 File Recovery". I tried to create a basic partition, and used the file recovery tool to create an image file, but the file would not be saved, maybe because the partition itself is on the same dynamic hard-drive (the error said something about the partition not being large enough etc... even though I made it 40GB).
My question is, is the native system imaging tool of Windows 8 unable to copy a dynamic drive, or is it because I need to save the image file to some place other than the hard drive (maybe a whole bunch of DVDs, since it is an option). The last computer that I own is as old as a dinosaur, so I really did not keep up with all these advancement- I just feel that dynamic format is a beast to work with.