Network / Sharing :: Can't Access Disk Drives Over LAN / User Is Admin
Mar 13, 2014
I have this problem since Windows 7, i don't remember this happens on Windows XP.
I have 2 computers with Windows 8.1 installed: desktop and laptop. I am trying to access local disk drives of "desktop" from "laptop".
For example, i type in Windows Explorer "desktopc$". "Windows Security" window pops up where i am typing credentials. If i specify "desktopadministrator" user and then provide correct password everything is fine, i can access disk C. But, if i type "desktopjohn" and provide correct password i am getting error "Access denied". "john" is my main account, it's in "Administrators" group of "DESKTOP" computer.
If i try to access the same resource over "cmd net use" i receive error "System error 5 has occurred. Access is denied."
Why "john" can't access "DESKTOP"'s disk C over LAN?
Have two Windows 8 machines and one has a bunch of drives connected to it, that I use informally as a file server. Generally, what happens is the following:
1) Boot the Windows 8 "server" machine (Windows 8 pro, not a Server OS)
2) Boot my Windows 8 Pro desktop
3) Open file manager app, double-click the icon for the server PC -- and drive icons open
But sometimes, when I do 3), I get an error message saying that the machine name is incorrect (which it is NOT).
When I click Details on this to see what is wrong, it says "no issues" -- but still can't connect.
This is generally resolved by rebooting the "server" box (and trying again), or rebooting the desktop box (and trying again), or going through repeated reboots of each -- until a connection is finally made.
I've checked the sharing permissions on the "server" box and they are set as follows:
1) Each partition -- read by everyone (used by the desktops to download files)
2) Shared folder in each partition -- full control by everyone (used by the desktops to upload files)
And ... password-protected sharing is enabled, such that when a desktop first tries to connect, you must enter valid account info. After that, the info is saved and you don't have to enter it again.
I've gone through removing sharing and reapplying it several times, and there are no changes as a result. And it's always all-or-nothing, that is, it's never a situation where some of the shares can be seen/used but not others.
Problem is, there are times when I really need access to the "server" drives from the desktop and can't reboot either because something is going on that takes a long time and I don't want to have to restart it. I also run XP on this box (which never gave me these problems) -- and would really like NOT to go back to using XP.
Prior to last week my computer was running Windows 7, the computer also has a 3TB MyBook external drive on which I ripped over 100 movies from DVD/Blue-Rays that I own (and still have). The reason for doing that was 1) so I could watch the movies on my TV without the hassle of inserting the dvd into the blue-ray player, and (2) reduce the amount of storage space (I threw away the original containers and put them in a simple DVD file).
Last week I installed a new internal hard drive and did a clean install of Windows 8. Consequently my admin account's user name was changed to be the same as my Microsoft live.com account name. Now I can't access any of the folders on MyBook without taking ownership of them one-at-a-time. That is going to be very very time consuming to do that for over 100 folders. Any faster way to accomplish this?
I don't know why Microsoft won't allow computer Administrator to access any folder on his computer. This is just dumb.
The situation gets even worse -- after taking ownership of the folders I still can't access any of the files or sub-folders. I have to do that for every folder and file, somewhere around 500 of them! I feel like just reformatting the drive and starting all over again.
Sometimes when I boot Windows 8.1, I get a generic screen that tells me that my profile couldn't be accessed and I now have a temporary profile. I went to the event viewer and it also said that it couldn't find my profile. I am the only user and administrator. Is there a way to make a new user profile AND not loose my files and settings.
I'm trying to allow my win xp desktop pc to be able to access the hard disk on my win 8 laptop.
I put them in the same workgroup and then map the laptop's disk on the desktop pc. I can now see the laptop's disk in "network drives" in the xp but when I try to open it, I get an error message that I am not allowed to access it.
So, back at windows 8, I go to my disk Properties, Security tab and try to Add permissions for the winxp pc, which is what I think I'm supposed to do to solve my problem. However, at the "Select Users or Groups" window, I click on Locations and the only thing that appears is the Windows 8 laptop. Isn't the desktop pc supposed to be appearing over there as well? I can't add permissions for a pc that doesn't exist in Locations.
Could not reconnect all network drives error at boot? I get it most of the time with a wired Ethernet connection. I've done a lot of searching and tried different things but nothing seems to work. This started a few months ago, was not there initially with Windows 8, 8.1 or 8.1.1.
With XP, you could do this to fix it:
Control Panel
Folder Options
View
Uncheck "Automatically search for network folders and printers"
This is no longer an option in Windows 8 (I think it disappeared with Vista).
I have 2 machines connected via my router/hub (wired). One is running Windows 8.1 and the other Windows 7. Previously I had them sharing perfectly until I did a reinstall of Windows 8 (upgraded to Windows 8.1). I get this message on both machines whilst trying to access shared drives (permissions enabled to read, write, modify for all users):
I have a local account on the windows 8.1 as per previous installation. I have checked all the usual sharing settings and they are the same as in the previous working installation on both machines. I have left the homegroup and created a new one on the windows 8 machine and rejoined on the windows 7 machine all to no avail.
I'm trying to map a Server 2003 network drive in Windows 8.1
For some reason, in the 'Map Network Drive' window, the server doesn't show under 'Network' when I click the 'browse' button. Additionally the server doesn't show under 'Network' in file manager but I can ping it just fine.
Is there perhaps some kind of incompatibility between Win 8.1 and Server 2003 that could be causing this ...
This is a boot up timing issue, registry fix for network comming up. I am on a wired LAN which works ok. However, recently when booting I am getting the message cannot connect to network drives - these are mapped drives to NAS boxes.
However, when I access the drives the 'red X's' change to the network symbol and access is working. Its seems the computer wants to connect before the network is up. It is not a credential issue, but boot order. Is there anyway to make the network come up before the computer wants to map to it. Not a problem but a nag.
I have been using an unelevated admin user account since installing win 8.1 pro and I've been having problems constantly (UAC nagging me, access denied when trying to kill processes and so on) and I decided I want to use the elevated admin account as my main. I understand security risks and convenience is more important to me as I don't have any sensitive information on my laptop. I was wondering if I can merge the user account I used until now, which has all my app settings, with the elevated admin user account and use that one from now on.
I have a laptop running Windows 8.1 with Update 1. I have drives mapped to my Windows Home Server 2011 and to my Windows 7 desktop PC. But each time I reboot the laptop it drops the mapped drives and I have to try and map them all over again. I say "try" because most times I have to go back to my other PCs and unshare and then reshare the drives for them to be seen again in Windows 8. Then I can map them again but only until the next reboot.
Same goes for the Windows Home Server 2011 Connector software. Windows 8.1 drops the connection after a reboot and the Connector software must be reinstalled EACH TIME to connect with my server.
I have the SAME user name and password on ALL machines. I have tried mapping the drives with just the username and password as well as with the remote PC nameusername combo but that doesn't work either. Finally I have set my shared drives/folders to have read/write access to ALL users. Again, no luck unless I unshare and reshare.
I am using windows 8 laptop. When i tried to log in to Beetel Router admin page(192.168.1.1), i was not able to log in. I used "admin" as username and " password" as the password. But the page is not getting loaded. Its asking for the username and password again. My friend is able to log in to the same page with the same credentials in his windows 7 laptop. So i guess its the problem of OS.
I have an ASUS RT-AC68U router with 9 DBI dual band antennas. I need a program that allows me to copy and paste files to the external hard drives which are connected to the router's USB ports. An example of the application I am seeking is called "Silex Virtual Link", I need one like this, I used to use this 1 on my old D-Link DIR-825 router but it is not working with my new ASUS router and ASUS tech support couldn't solve anything.
I am trying to find a definitive answer to the question of mapping external hard drives. I have 4 external hard drives and would like to know if there is benefit in mapping them or not. Is there benefit in speed/response etc.... I do a lot of video streaming through media centre to xbox 360.
I am in the midst of the final steps in setting my my new Win 8 system.
I have a Win XP and Win 8 computer on my home network. I believe that I have set up file and printer sharing correctly. I can access the files and printer on the XP system from the Win 8 system. However, when I attempt to access the Win 8 files from the Win XP system, I get a long delay (about a minute or two) and then it asks me for the User Name & Password. I enter them and then and it works fine.
If I try to print on the printer attached to the Win 8 system from the XP system, I get a printer error unless I have already signed in with the ID & PW when accessing files. It never asks me for an ID & PW before attempting to print.
On the Win 8 system, I have selected "Turn off password protected sharing" in the "Network and Sharing Center/Advanced Sharing Settings".
The Win XP system has previously been correctly sharing files and printers with another XP system for some time and I haven't changed any settings on the XP computer.
Both the XP and Win 8 systems are assigned the same Workgroup name.
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
As the title says, I'm getting a box saying "An unexpected error has occurred" whenever I try and access the properties window for my ethernet adapter. An unexpected power outage earlier in the day rendered my Windows 8 installation half messed up, leaving most of my drivers corrupt, so I had to attempt a refresh today, which solved most of my problems.
Unfortunately others like this have been cropping up since the refresh. I've looked for other possible solutions to this problem, and none have worked so far. Re-registering DLL files solved nothing, a system file check didn't do anything, and making sure I was in the correct user groups didn't solve anything either.
So I've some folders in my Desktop that I want to share with all the hosts in my network, so what i did was to create a new users and set all those folders only to read mode and, everytime I wanted to access the folders on those machines I simply access those folders via that user (in Windows hosts I just enter the network path like ip_addressfolder , windows then asks for the network password, I authenticate with that user and I have access to those folders.
The thing is that in my Surface RT (Windows RT -ARM), every time I try to access those folders via the method above (ip_addressfolder), I do see the folders, but when I double click on one of them in order to have access, instead of letting me authenticate, it simply returns the following error: Windows Cannot Access ip_addressfolder
Why is this so? Why doesn't Windows allow me to authenticate? Is this a limitation of the RT platform?
Since I changed the security parameters to my Linksys Wireless Router so my grandson could log in while visiting me on his laptop. I can't seem to be able to access my other computer on my home network. Enclosed is an "ipconfig/all" screenshot. I need to access my printer on my other printer which I was able to do prior to playing around with my router. All the diagnostics say more or less the same thing. They can "see" the computer but it isn't responding...
I just got a brand new Samsung Laptop for work. I dont know a ton about windows 8 either im fairly new to it. I work at a mental hospital doing security and we are allowed to have a laptop for over night shifts. I have an Alfa wireless antenna (cause i get low signal where im stationed) along with my normal laptop Wifi.
Heres the story. I was using my laptop antenna then out of no where it said "Identified Network (no internet access)" then my internet just stopped. I had this happen on my old laptop and it lasted a few days then worked like normal again. Then i switched to mt usb antenna and it worked fine for about 20 mins then all of a sudden it went it "Identified Network (no internet access)". So I was stuck with no internet. I tried looking up fixes on my ipod and i tried 3 Ways To Fix The Unidentified Network Error in Windows 8 and it didnt work I tried How To Fix Unidentified Network Windows - YouTube and it didn't work either. I'm dying here cause I have to sit in a room for 12 hours tonight with no way to keep my self from falling asleep or entertained.
This is a fairly new install of Windows 8 pro (within the last month), and while trying to set up a static ip up today I found that I was unable to access the network properties or disable the connection in the Network Connections. I am pretty stumped as I am the only user of this computer and from what I can tell have the correct permissions to do so. When trying to check the properties it tells me "an unexpected error has occurred" with no further information.
I installed the update for 8.1 (X64) but after the update i could not access my diskstation.
Pinging went fine. Accessing trough the webpage went fine.
But trying to access it with the explorer did not work. Not even when i tried it with the IP address.
After a system restore (before the update) everything works fine again. What settings are altered with the update? And why are settings altered in the first place. I will not use sky drive!
I use a USB modem in Windows 8.1 laptop. I want to share the internet to other devices by creating a hostednetwork. I used the netsh commands to create and start the hostednetwork. The wifi hotspot got created as 'Local area network connection *14. The internet from the USB modem was shared to Local area network connection *14. Other devices are able to connect to this and are getting IP address in the range of 192.168.137.X. The issue is that, the devices are not able to access internet. in troubleshooting this issue.
Don't give the instructions to create a hostednetwork or advice to use 'Virtual router plus'. I have already done all sorts of basic troubleshooting. Everything looks fine, but there is no internet connection to other devices.
I am able to share internet using the same USB modem with same method in Windows 7.
I have two pcs: an old desktop pc with windows xp and a notebook with windows 8.
Both computers are connected to the Internet through an adsl router and are also connected togheter, sharing files and folders through plain networking: HomeGroup would not work with windows xp.
Therefore, both computers are under the same workgroup, have different IP addresses and both share printers and folders.
I am able to log into my notebook [running windows 8] from my desktop pc [running windows xp] but not vice versa.
When my windows 8 machine prompts me for user name and password to log into my windows xp machine, my user name and password are not recognised.
I tried setting up the same user name with the same password on both machines, but whilst now I am able from my Windows XP machine to log directly into my Windows 8 machine, without entering user name and password, I am still receiving the 'The user name or password is incorrect' message from my windows 8 machine.
In both machine I installed Comodo Internet Security. I set up Comodo Firewall in my Windows XP machine to receive Remote Desktop connections.
Now I am able to connect to my XP machine from my Windows 8 machine via Remote Desktop. I am still unable to log into it from the Network folder, though.
I got this problem on my laptop Asus u38dt under Windows 8.1 a couple of months ago. It cannot connect to any network either via Wi-Fi or Ethernet (I tried an external USB Wi-Fi adapter as well, with the same result). In case of getting IP with DHCP, the network is shown as Unidentified network with no address assiged (IP is like 169.*). When static IP enabled, the network name is correct. But in both cases, connection is Limited and with No Internet access.
Connection can't be established with any router while other devices connect properly with them, so the problem is on the laptop side.
With all of this, any ping, even to 127.0.0.1, results in General failure.
When booted in Linux liveUSB, network works fine, so it is clearly not a hardware issue.
I tried resetting TCP/IP stack with "netsh int ip reset", reinstalling drivers, reinstalling the network adapter, and lots of other methods and still it doesn't work. Restoring system is not an option since I don't have any restoration point prior to the problem anymore.
I am trying to elevate a command given (in this case just another cmd.exe) if the user is not admin. However i get the error:
Code:
C:Usersmetul_000>runas /user:administrator cmd.exe Enter the password for administrator: Attempting to start cmd.exe as user "WINDOWS8administrator" ... RUNAS ERROR: Unable to run - cmd.exe 1326: The user name or password is incorrect. C:Usersmetul_000>
This is a personal pc, and I know i put in the password correctly as i have done it a few times slowly typing in my admin password to confirm that it is input correctly. So why am i getting this error? Initially my overall goal is to get this python script to say you are admin ...
Code: import ctypes import subprocess import sys import os
[Code] ......
if you are admin its done, but if you are not admin then it reruns itself with the so called run as command to get admin rights. However currently it just pulls up the run as usage messages. The full command this script attempts to run then is:
Code: C:Usersmetul_000>runas /user:administrator "python3 test2.py" Enter the password for administrator: Attempting to start python3 test2.py as user "WINDOWS8administrator" ... RUNAS ERROR: Unable to run - python3 test2.py 1326: The user name or password is incorrect. C:Usersmetul_000>
HP 15-d005TU -3rd Generation Intel Core i3-3110M Processor (2.4 GHz) -500GB Hard Drive Toshiba MQ01ABF050 -4096MB DDR3 SDRAM -DVD Optical drive hp DVDRAM GU90N -Windows 8.1 64bit
On delivery it had 9 Windows updates installed ( 8, dated Nov 13 and the last one dated 07 Mar 2014, perhaps just before it left the factory). My first priority was to update Windows. A total of 78 updates including the last major Windows 8.1 update 1 akin to a Service Pack - KB2919335 and all this took a lot of time. All updates went on well with no problems.
Now I find that Windows Disk Management lists two OEM recovery partitions D: ( What it was earlier, I did not notice but I presume it was showing one correctly since any abnormality would have caught my attention.)
Diskpart lists all the partitions correctly. And so also bootice. Now what is causing this and how do I fix it?
I find there is a Intel Manageability Firmware Recovery Agent - [URL] .... My own guess is some Intel driver/firmware may be causing it. As I said it is only a guess. I tried the update with it but so far Intel servers could not be reached though my internet connection is OK.
I've got a sony viao ultra book running Windows 8.1. My user account is set to open with a four digit pin. Unfortunately, although I know the PIN number, I have forgotten both the user and the admin password. So I can't load any new software as it asks me for the admin password every time. How to retrieve both passwords?
