Network / Sharing :: Can Linksys Router Block Access To Network
Jan 3, 2014
Since I changed the security parameters to my Linksys Wireless Router so my grandson could log in while visiting me on his laptop. I can't seem to be able to access my other computer on my home network. Enclosed is an "ipconfig/all" screenshot. I need to access my printer on my other printer which I was able to do prior to playing around with my router. All the diagnostics say more or less the same thing. They can "see" the computer but it isn't responding...
View 4 Replies
ADVERTISEMENT
Aug 8, 2014
I am sharing my internet connection with my roommates, but lately they have been using P2P to download stuff which uses almost all the internet speed available. I have set up QoS to limit their bandwidth in the main Asus wifi router which directly connects to the modem, it works great for a few days, but then it doesn't work anymore, I still get slow internet speed now. Since my flat has 2 wifi routers, one is the main and another one is set up with a different name but still connects to the main router via the ethernet cable a few metres away so that the wireless range is increased. Just for your information, the two routers are transmitting on different channel, if you think that might be the cause and they have different SSID.
Could it be possible that the QoS only works in the main wifi router and doesn't affect the other wifi router which my roommates also have access to it?
I have changed the default router password so I am sure that they have no access to the router's settings.
View 3 Replies
View Related
Jan 19, 2014
Yesterday I purchased a new Dell Laptop. In the setup and configuration the unit found my wireless network. I have two other PC's (not windows 8) two Kindles, two Cell phones and an IPAD on this router and all the Dell would say it it can't connect to this network. It won't ask for the passkey, it provides no additional information and I can't get online in my own network with this system. I can however log on to a neighbors unsecured network effortlessly.
I am using an old airlink 101 wireless router that has been trouble free for several years. I tried to log onto airlink for a support inquiry but they no longer provide support for this model.
View 1 Replies
View Related
May 31, 2013
I have broadband from virgin media with one of their superhubs made by netgear, I have a CCTV DVR plugged into this using a regular cat5 cable, the DVR will allow you to view 4 cctv cameras via the internet,
Android and blackberry phones can both connect to the router using wifi, an IBM laptop running XP also has no problems, the only thing that does have a problem is a new Toshiba laptop running windows 8,
If the DVR is plugged into router before win 8 connects then the Windows 8 machine cannot log on using wifi, it gives message saying restricted access and has no internet access, if you unplug the DVR Windows 8 machine logs on fine you can then plug DVR back in and laptop can browse all day with no problems, if you log off then try and log on again you get the same restricted access message again ...
View 4 Replies
View Related
Dec 30, 2013
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
View 2 Replies
View Related
Feb 17, 2013
When I click network while i am in windows explorer, the network infrastructure is not there, only the Computer is visible there and i want to fix something by changing the properties of my modem/router on the network infrastructure.
View 5 Replies
View Related
Jun 29, 2014
without the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
View 7 Replies
View Related
Jan 23, 2014
Wifi worked, walked away for 10 minutes, then found that it didn't. I would normally just reset the router, but I live in an apartment building and the router is in my landlords office.
When I did ipconfig /all, my ip started with 169, which I know isn't normal. But when I try to do a /release and /renew, I get the error "No operation can be performed on local area connection *14 while it has it's media disconnected." I am unable to attempt a wired connection, as the router is not accessible to me.
.I'm not sure if this is a router issue, or an issue with my laptop (less than a year old.) I am a grad student and I currently have to do most of my work via my iphone, which is getting very inconvenient.
View 3 Replies
View Related
Feb 13, 2013
I have a netgeat WNDR4500, I also have readyshare cloud installed on my home pc (HP pavilion elite x64 Win 8 pro) I also have it on my work pc (windows 7 pro Lenovo). I cannot seem to access my shared folder when logging in to ready share, it shows my device, but never pulls the shared folder. Is there something in the port forwarding setting that I may need to change?
View 7 Replies
View Related
Mar 21, 2014
So i always when i try to go to my router settings or test my speed i always notice that my ip is changing every day.
View 7 Replies
View Related
Jun 12, 2013
I am using windows 8 laptop. When i tried to log in to Beetel Router admin page(192.168.1.1), i was not able to log in. I used "admin" as username and " password" as the password. But the page is not getting loaded. Its asking for the username and password again. My friend is able to log in to the same page with the same credentials in his windows 7 laptop. So i guess its the problem of OS.
View 3 Replies
View Related
Aug 10, 2013
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies
View Related
Nov 15, 2013
I have to reconnect my Win 8.1 computer each time it's started,my Win 7 computers do not have this problem. Also my Canon G16 WiFi camera can connect to all my Win 7 systems but not to my Windows 8.1 the camera is not found. Windows 8.1 has been a real bummer. Just glad I still have other computers running Win7.
View 1 Replies
View Related
Oct 19, 2013
Since upgrading to 8.1 , if I try and access my routers web page to change some config settings , the browser (and I've tried 4 different ones) connects to the web interface REALLY REALLY slowly... we're talking 5-10 minutes just to show part of the menu UI and even then not all the graphics show.
I can connect to the same interface using my tablet and it's instant...
Under Windows 8.0 it worked just fine also...
General web browsing is fine as is internet access for gaming etc...
View 6 Replies
View Related
Jun 30, 2014
my tp link wireless router problem. The problem is related to windows 8 apps.
View 9 Replies
View Related
Sep 15, 2014
I have a linksys WRT54G router connected to a beetel 110TC2 modem. I want to get a static ip address for port forwarding. How to get a static ip and how to do port forwarding?
View 5 Replies
View Related
Sep 15, 2014
I'm trying to set up my router to the new internet connection and get the wifi going but for the life of me I cant get it set up. The internet connection itself is fine, from modem to pc. Once I have the modem in the mix,it gets no/limited connectivity and cannot reach the setups. I have tried the classic 192.168.2.1 and 192.168.1.1 and about 5 other variations, along with 'http://router'. My router is a Belkin N300 Wireless N Router. If I use a command prompt and do 'ipconfig', there is no ip address beside 'gateway default' once the router is connected. I have reset my router to factory settings. I've tried using a static ip address for my computer [though not sure if i did it correctly]. My DHCP is enabled.
View 6 Replies
View Related
Jan 20, 2014
I have my private wireless router setup so that when I select it the password is provided automatically.
How do I force the system to ask for the password each time I connect?
View 9 Replies
View Related
May 10, 2014
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
View 6 Replies
View Related
Jun 27, 2014
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
View 3 Replies
View Related
May 3, 2013
As the title says, I'm getting a box saying "An unexpected error has occurred" whenever I try and access the properties window for my ethernet adapter. An unexpected power outage earlier in the day rendered my Windows 8 installation half messed up, leaving most of my drivers corrupt, so I had to attempt a refresh today, which solved most of my problems.
Unfortunately others like this have been cropping up since the refresh. I've looked for other possible solutions to this problem, and none have worked so far. Re-registering DLL files solved nothing, a system file check didn't do anything, and making sure I was in the correct user groups didn't solve anything either.
View 3 Replies
View Related
Apr 20, 2014
So I've some folders in my Desktop that I want to share with all the hosts in my network, so what i did was to create a new users and set all those folders only to read mode and, everytime I wanted to access the folders on those machines I simply access those folders via that user (in Windows hosts I just enter the network path like ip_addressfolder , windows then asks for the network password, I authenticate with that user and I have access to those folders.
The thing is that in my Surface RT (Windows RT -ARM), every time I try to access those folders via the method above (ip_addressfolder), I do see the folders, but when I double click on one of them in order to have access, instead of letting me authenticate, it simply returns the following error: Windows Cannot Access ip_addressfolder
Why is this so? Why doesn't Windows allow me to authenticate? Is this a limitation of the RT platform?
View 9 Replies
View Related
Feb 22, 2013
I just got a brand new Samsung Laptop for work. I dont know a ton about windows 8 either im fairly new to it. I work at a mental hospital doing security and we are allowed to have a laptop for over night shifts. I have an Alfa wireless antenna (cause i get low signal where im stationed) along with my normal laptop Wifi.
Heres the story. I was using my laptop antenna then out of no where it said "Identified Network (no internet access)" then my internet just stopped. I had this happen on my old laptop and it lasted a few days then worked like normal again. Then i switched to mt usb antenna and it worked fine for about 20 mins then all of a sudden it went it "Identified Network (no internet access)". So I was stuck with no internet. I tried looking up fixes on my ipod and i tried 3 Ways To Fix The Unidentified Network Error in Windows 8 and it didnt work I tried How To Fix Unidentified Network Windows - YouTube and it didn't work either. I'm dying here cause I have to sit in a room for 12 hours tonight with no way to keep my self from falling asleep or entertained.
View 1 Replies
View Related
Mar 9, 2013
This is a fairly new install of Windows 8 pro (within the last month), and while trying to set up a static ip up today I found that I was unable to access the network properties or disable the connection in the Network Connections. I am pretty stumped as I am the only user of this computer and from what I can tell have the correct permissions to do so. When trying to check the properties it tells me "an unexpected error has occurred" with no further information.
View 9 Replies
View Related
May 31, 2013
My computer keeps listing the internet connection as "limited". It does this randomly, I don't know when it will happen next. Restarting router/computer fixes it sometimes, but not all the time. Sometimes it takes about 4 restarts of the router until I get a proper connection. Trouble shooting merely describes the problem as having no connection and tells me to reconnect the router. This takes around 5 minutes each time and I'm getting tired of doing this, as it interrupts skype calls, games and conversations.
View 2 Replies
View Related
Nov 26, 2012
I bought an Asus G75vw couple days back with windows 8. Everything was working fine except that i couldn't connect to my wireless router. It had a WEP encryption. After I entered the Network Security key, I Kept on getting "Can't connect to this network", troubleshooting didn't work either. Then I updated all drivers from Asus support website and it connected after a restart. I was quite delighted but the next day again i got the "cant connect to this network" message. So I changed my encryption to WPA2-PSK (AES) and even updated the firmware of my router. Still no luck.
View 9 Replies
View Related
Sep 15, 2014
I presently have a ethernet system to my computer. Getting a laptop that has a wireless adapter. Can I just add a wireless router to the ethernet instead of my new laptop?
View 3 Replies
View Related
May 19, 2013
I am trying to change the ip address manually. to unbrick my router. so I go to my network and click properties to change the tcp ect. and the famous Unexpected error accured pops up. I try all the regsvr32 ect. stuff and nothing works. I have windows 8 pro.
View 4 Replies
View Related
Mar 25, 2014
I use a small usb modem for my internet access and using a usb wifi adaptor and a virtual wifi router I was able to share my internet around home quite affordably.
Every now and again the software 'virtualrouter' would cause a crash. Maybe once every 3 months.
When I updated to 8.1 the software no longer worked, nor did any other. What's more it cause a DPC-Watchdog violation within a few minutes.
When I say the software doesn't run, one of two things happen. My old program 'virtualrouter' runs as normal, but none of my devices can connect. The network is available, but connection is impossible.
With other programs I get told that the wifi adaptor is not enabled. Which it is.
Something has changed in the upgrade and I don't know what. Every option and test I've run and enabling of virtualisation says that it should work. But then the BSOD arrives.
View 9 Replies
View Related
Aug 23, 2013
I recently brought the netgear wireless router and i connect it to the my wired network and after i complete successfully about the settings of netgear and after that i check the internet speed at speedtest it shows almost 2mbps download speed and 1.5 mbps upload speed but when i put the a file to download the speed only changes in between 60 - 70 kbps actually it gives 200 to 250 kbps but it doesn't.....i really tired my best get normal speed but i didn't got that....
View 1 Replies
View Related
Apr 9, 2014
I installed the update for 8.1 (X64) but after the update i could not access my diskstation.
Pinging went fine. Accessing trough the webpage went fine.
But trying to access it with the explorer did not work. Not even when i tried it with the IP address.
After a system restore (before the update) everything works fine again. What settings are altered with the update? And why are settings altered in the first place. I will not use sky drive!
View 9 Replies
View Related
