Network / Sharing :: Unable To Access Properties Of Network Connection
Mar 9, 2013
This is a fairly new install of Windows 8 pro (within the last month), and while trying to set up a static ip up today I found that I was unable to access the network properties or disable the connection in the Network Connections. I am pretty stumped as I am the only user of this computer and from what I can tell have the correct permissions to do so. When trying to check the properties it tells me "an unexpected error has occurred" with no further information.
I have up until a few days ago been able to modify and save my network properties ok. I connected a new DisplayLink USB docking station that lead to an update of some sort. I believed this to be to do with associated drivers. I let this go ahead and it may well have nothing to do with the problems I have been having.
First of all I couldn't even see the IP parameters and kept getting an error as follows:
"In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card"
The wired and wireless was working in environments where I could use DHCP so I was confident the hardware was ok. Uninstalling the drivers and then updating them has got me passed this problem so I can see and edit the IP parameters. However now they are never saved. I edit them, close the window, re-edit them and they are back to automatic settings! I need to use static settings in the office.
So far as I can see there are 2 possibilities:
1. I don't have permissions to save these settings, wherever they are stored. But I have administrator permissions. Where are the settings stored? I have saved them before. How can I get access to be able to save them again? 2. Something else is overwriting the settings. How do I find out what and stop it?
Every time I sign into my windows 8 account at home it never automatically connects to it. I tried following the tutorial at [URL]......
However when I get up to the part where you are support to right click on the wifi connection to access view connection properties I am unable to. Right clicking on the wireless connection does absolutely nothing. I even tried clicking on it and holding and still nothing.
When I go to the network and sharing center and click on the wireless connection it pops up a dialogue called wi-fi status. However there is no button for wireless properties. I remember in windows 7 there use to be a tab where you change the key encryption type and there was a check box where you can save the password. Essentially I can't access the dialog box in page 10 of the above link.
I have a VPN connection from home to work and now that I have moved to Windows 8 I can't get it to work. I have tried pretty much everything I can think of and find on forums and YouTube videos, eg turning off Norton (virus and firewall), opening ports on my router and configuring all manner of settings for the VPN connection.
I have my old Win7 laptop and I can still instantly connect to the VPN using that. So, I have copied all of the settings from there, but still no result.
I constantly get the 'Error 800' message (Unable to establish the VPN connection).
One video showed the steps of setting it up and there were no mysteries to it. It was pretty much all default settings.
I've been having a problem since I updated to Windows 8.1My internet wi-fi connection is unusually low and is not working after only minutes of browsing the internet. The problem is always fixed after I run troubleshoot problems and is saying that the default Gateway is unavailable. My netword card might be the source of the problem even tough I updated the drivers. I'm not sure which one I have because drivers from Ralink and Qualcomm seem to be working both.
Recently my Samsung laptop has been getting kicked of my house's WiFi. The computer will power up normally and connect to the WiFi, but as soon as I try to use the WiFi to access the internet the connection fails.Typically this only occurs when other devices are connected to the same WiFi. As soon as the other decieves are taken of the WiFi the computer is able to access the internet again. I have tried updating all my drivers and still nothing.
I just got my new computer today and first thing I did after setting it all up was try and connect to the internet. I plugged in my ethernet cable I would only get "Limited Access" to the router I've spent the last 10hours+ trying to find a solution but not a single has worked now what to do.
I've tried manually putting IP/DNS but nope no luck. I've uninstalled drivers and reinstalled drivers, restarted router tried various cmd commands but I really just dont know what to do anymore.
Recently I have been installed Windows Eight Pro 64-bit in two of my desktop computers. One pc having motherboard Intel DG41 and the other one is Asus Sabertooth P55i. I have two external Realtek NIC card installed in both of the pcs. When I was using Windows Seven 64-bit, I installed PPPOE as follows:
=> Conrtol Pannel => Network and Sharing Center => Setup a new connection or network => Connect to BROADBAND (PPPOE) [something like that]
But when I am trying to install pppoe on windows eight like the same process, it shows "Unable to install PPPOE" kinds of message and reboot. I thought the NIC card driver was not installed properly so I re-install the NIC card driver and again tried but it crashes and then reboot.
The funny part is, when I plugged the Ethernet cable into my built-in NIC card (the one that is embeded on Motherboard), it doesnt reboot and installed successfully. But I need to use the external NIC card and with that I am unable to connect to PPPOE.
I face the same problem in both of my pc and now I have to use the built-in NIC card. Is there any solution to use the external NIC??
I have been having issues with sharing my internet connection via an ethernet cable. I read online that there is the ability to 'share' your internet connection. I have learned how to do this, but it doesnt work for me. I tried connecting my laptop. I went through everything and I was able to get the connection (it showed the LAN connectivity icon) however, there was the little yellow triangle next to it. I waited but it won't connect. What I am trying to do with this is be able to play multiplayer on computer games with other computers on my LAN. I also tried to connect my XBox 360 with this, but it doesnt have an internet connection.
Things to keep in mind The only way I could get a good internet service was through my cell phone service provider, so I get my internet connection through my phone via USB tethering
All of the computers I am trying this on have Windows 8 Pro, except for one
My Windows 8 laptop is having some WiFi connection issues.
Basically what happens is that every 5-20 minutes I cannot access the internet on browsers and the wifi connection is listed as "Limited".
The laptop: ASUS Vivobook S200E
The WiFi: Sky wireless router (no idea about model, it's almost two years old) But what I will say is that my Windows 7 laptop never skips a beat on this network, nor does my wife's Mac, nor do our 2 Android tablets, the iPad, the iPhone, the Android phone, and various devices that our friends connect when they come round. Literally no other device has any problems on this network, so I know (by the process of elimination) the Windows 8 laptop is the one with the problem.
In order to fix the issue I have to disconnect from the network, wait about 30 sec and reconnect again.
I'm having a pretty major issue with Skydrive on Windows 8.1. A vast majority of my files are unopenable from Explorer (or the Modern UI app which seems to just open them through explorer in the end anyway). When I try to open one of these files, I receive an error message titled "1 Interrupted Action" and displaying the message:
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search to solve this problem.
Error 0x80040A41: No error description available
I have yet to find anything even resembling a solution when I search for that error code. The options this error window gives me is to "Try Again" which presents a typical explorer progress bar that never goes anywhere or to "skip" or "cancel" which do the same thing. Essentially this means that I have to use the skydrive web client to download the file to some other location locally and then edit and reupload from there. As far as I can tell there also isn't a traceable logic to what files are going to be accessible and which ones are not. I could literally be just finished working on a file, save it, and have it inaccessible when I try to reopen it. This error has not improved or changed at all by my making any files "available offline" or "available online-only" (in fact clicking those options doesn't seem to actually change their Availability that is listed in explorer).
I've used Skydrive for a few years now (since the beta I believe) as my primary cloud storage service, I pay for Office 365, and therefore I have access to a larger amount of storage on Skydrive than I do on other cloud services. I'm using Google Drive temporarily, but its incredibly inconvenient given how invested and reliant I've become to Skydrive.
I have a home wired LAN with the following configuration:
1) A Win 7x64 PC (static IP) 2) A Win 8.1x64 LAPTOP (static IP) 3) A Synology NAS (static IP) 3) A TP-LINK TL-R600VPN Wired Router connected to a cablemodem (internet access WAN) and to the switch. 4) A Trendnet 8 port switch connected to the 3 clients (PC, Laptop and NAS) and to the router (TP-LINK)
I have created a Windows Homegroup (Home/Private) from either the PC or Laptop going step by step as per these instructions and making sure that in both the PC and Laptop all requirements are met (required services, adapter settings, etc). The Homegroup is created successfully but the following issue arises:
- From the PC I can access shared files in the Laptop (by going to Windows Explorer/Network for example). From the PC I can also access the NAS shared files. - From the Laptop, even though the Homegroup shows "Joined", I cannot access any shared file in the PC or NAS (it will show Error 53, network path not found). If I try to map a network drive (to directly access a shared folder in either the PC or NAS), it will also display an error saying that the network path cannot be found. However from the laptop I can access the NAS using the browser (Firefox, IE, etc).
So what is preventing the access to shared folders in the LAN from the laptop?
On my home network, I have my desktop, my HTPC (wired) and my wife's laptop (Wifi). The desktop and HTPC are bth running Win 8 pro. The laptop is running Win 7. All are 64 it.
Invariably I try to log onto my HTPC from my desktop and it says that I am unable to access the files. I then open up network and sharing center to check on the network password only to find that is has changed itself somehow. Even after I reset the password on both the HTPC and the desktop. I still cannot access my shared files on the HTPC from the desktop. The only way to share files is to get them from the HTPC which for some reason lets me access my desktop files.
The laptop is not really an issue. ONce I enter the new password I can access files on the desktop and print no problem. I guess the 2 issues are...
1) the random changing of the network password 2) the inability to access networked files FROM the desktop. The reverse seems to work flawlessly.....
I have a bunch of folders that are shared from external hard drives, connected to my new windows 8 machine.
Other computers/phones/tablets at home on the same network can access folders from the internal HD on my main computer.
But, with shared folders from external hard drives - despite showing up while accessing the network cannot be opened or read from connected devices or other computers on the network.
I'm a relative amateur when it comes to networking but I did not have this issue with my older windows 7 home computer.
In continuation to my previous thread on this subject, I now have another network printer problem in the same system. I chose to open it in a separate thread because the previous one became too long.I have 3 PCs on my home network
1. Windows XP (SP3) desktop with HP6500 E709a USB printer.
2. Windows 7 (Ultimate SP1 64 bit) desktop with HP 1018 USB printer.
3. Windows 8 (64 bit) laptop.
All computers can see each other and share folders on the home network.
Computers 1 & 2 can freely print on their own printers, as well as on each other's printer. Computer 3 (Windows 8) can print on the HP6500 (which is connected to the XP computer), but cannot print on the 1018 printer connected to the Win7 computer.
I know that on the Windows 8 laptop I have to define a local port for the network printer, but when I try to do it I get "Access denied" error message. Win7 denies access from Windows 8. This is strange, because Win7 does allow access to XP. On the WIN7 computer, under printer properties/security, print permission is granted to "Everyone".
So what could be the reason for the "Access denied" error? I guess it has to do with security / users / permissions, but I cannot find a solution.
I have 2 PC's. Both are now running Windows 8. The main PC was running Windows 7 and I there mapped a network drive (z to the Windows 8 PC. It worked very nice. The second PC was also shown in "networks" in "my Computer" right after boot of Main PC. So network for sharing is set up properly on second PC.
After installing Windows 8 on main PC, it is still working, but the time spend waiting for the network drive is waaaaay longer now. The name of second PC "Photo-PC", is shown right after boot, but when I first click on the name, and get this error:
Networkpath not found. Errorcode 0x80070035
If I then wait about 20-30 seconds and then click again on "Photo-PC" then I have access to all shared drives, included my mapped network drive Z:
How can I eliminate this 20-30 seconds delay after boot?
I have given up setting up a homegroup, never had it to work, but "oldfashioned" network drives used to work
I just bought my daughter a Lenovo running Windows 8 and when I try to connect to my Wi-Fi I am getting Limited connection only and can't figure it out.
We just bought a new machine having windows 8 preinstalled and we use it as a server running small web apps but sometimes it just went dead when nobody touch it for long and we suspect it's the issue related to sleeping mode if it is how do we fix it?
I am frequently getting page not found errors, and am having to reload, pages take a long time to load and it's pretty much 50-50 wether it will or not load at all.
I've tried rebooting my router. I have a Vergin Media 'Super Hub' which is only two months old.
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I have strange network problem these days. I have a desktop PC and installed Windows 8.1. And I have a LAN. The gateway IP address is 192.168.2.1.
The network works fine when I start the PC. I can access Internet with IE, I can access the config pages of my gateway and I can SSH my local File server. It's a synology ds212j. I assigned static IP address 192.168.2.18 to it and name it as "home_ds". I add dns entry in file "hosts".
But there will be very strange problems if the PC keeps running about 2/3 days. It seems I can't connect to other computers from my PC. No IE, no SSH, no ftp.... But ping still work. These is no network device listed in my network folder. But I still can access the mapped network drives.
For example, I can ping www.google.com, I can ping 192.168.2.1 and 192.168.2.18 and "home_ds". K:> ping 192.168.2.1Pinging 192.168.2.1 with 32 bytes of data: Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.2.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 13ms, Maximum = 61ms, Average = 32ms
But when I try to telnet and ssh, all failed.
I tried: telnet www.google.com 80 telnet 192.168.2.1 80 telnet 192.168.2.18 22 all failed.
I tied putty, msn, outlook,... all failed. But my wife's PC works normally at the same time.
In the network folder, there should be a list of all my network devices, including my wife's PC and my File server. But it's empty if this problem happens. However I can add them mannually and I can access the network drives.
And I can connect to my PC from my wife's PC with remote desktop.
If I logout and login again, the network will recover except 1 new problem. That is I can't access the network drives of my File Server with computer name "home_ds", but IP address works. And I can ping it with computer name.
K:>ping home_ds Pinging home_ds [192.168.2.18] with 32 bytes of data: Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.2.18: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 11ms, Maximum = 30ms, Average = 19ms
A restart will solve both the above 2 problems. But I don't want to restart my PC so frequently.
I tried to solve this problem by update windows and drivers but failed.
when i connect my hp probook 4520s to my sony vpcyb4ajg with Ethernet cable on my Hp wireless disconnects and can not be connected until i disconnect lan cable. but on my sony i have both wired and wireless connections simultaneously
hp:Windows 8 x64 realteck Ethernet and atheros wireless
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
As the title says, I'm getting a box saying "An unexpected error has occurred" whenever I try and access the properties window for my ethernet adapter. An unexpected power outage earlier in the day rendered my Windows 8 installation half messed up, leaving most of my drivers corrupt, so I had to attempt a refresh today, which solved most of my problems.
Unfortunately others like this have been cropping up since the refresh. I've looked for other possible solutions to this problem, and none have worked so far. Re-registering DLL files solved nothing, a system file check didn't do anything, and making sure I was in the correct user groups didn't solve anything either.
So I've some folders in my Desktop that I want to share with all the hosts in my network, so what i did was to create a new users and set all those folders only to read mode and, everytime I wanted to access the folders on those machines I simply access those folders via that user (in Windows hosts I just enter the network path like ip_addressfolder , windows then asks for the network password, I authenticate with that user and I have access to those folders.
The thing is that in my Surface RT (Windows RT -ARM), every time I try to access those folders via the method above (ip_addressfolder), I do see the folders, but when I double click on one of them in order to have access, instead of letting me authenticate, it simply returns the following error: Windows Cannot Access ip_addressfolder
Why is this so? Why doesn't Windows allow me to authenticate? Is this a limitation of the RT platform?
Since I changed the security parameters to my Linksys Wireless Router so my grandson could log in while visiting me on his laptop. I can't seem to be able to access my other computer on my home network. Enclosed is an "ipconfig/all" screenshot. I need to access my printer on my other printer which I was able to do prior to playing around with my router. All the diagnostics say more or less the same thing. They can "see" the computer but it isn't responding...
I just got a brand new Samsung Laptop for work. I dont know a ton about windows 8 either im fairly new to it. I work at a mental hospital doing security and we are allowed to have a laptop for over night shifts. I have an Alfa wireless antenna (cause i get low signal where im stationed) along with my normal laptop Wifi.
Heres the story. I was using my laptop antenna then out of no where it said "Identified Network (no internet access)" then my internet just stopped. I had this happen on my old laptop and it lasted a few days then worked like normal again. Then i switched to mt usb antenna and it worked fine for about 20 mins then all of a sudden it went it "Identified Network (no internet access)". So I was stuck with no internet. I tried looking up fixes on my ipod and i tried 3 Ways To Fix The Unidentified Network Error in Windows 8 and it didnt work I tried How To Fix Unidentified Network Windows - YouTube and it didn't work either. I'm dying here cause I have to sit in a room for 12 hours tonight with no way to keep my self from falling asleep or entertained.
I have been trying to upgrade all of my computers to Win 8.1. 2 updated fine, but the last machine will not upgrade.
Every time I try to upgrade my last computer through the Store I get the following error: "We weren't able to connect to the Store. This might have happened because of a server problem or the network connection might have timed out. Please wait a few minutes and Try Again."
I have waited, and rebooted, with no success. I tried to log on using my Windows Live ID and get a similar message.
