Network / Sharing :: Unable To Print On 1018 Printer - Getting Access Denied Error?
May 17, 2014
In continuation to my previous thread on this subject, I now have another network printer problem in the same system. I chose to open it in a separate thread because the previous one became too long.I have 3 PCs on my home network
1. Windows XP (SP3) desktop with HP6500 E709a USB printer.
2. Windows 7 (Ultimate SP1 64 bit) desktop with HP 1018 USB printer.
3. Windows 8 (64 bit) laptop.
All computers can see each other and share folders on the home network.
Computers 1 & 2 can freely print on their own printers, as well as on each other's printer. Computer 3 (Windows 8) can print on the HP6500 (which is connected to the XP computer), but cannot print on the 1018 printer connected to the Win7 computer.
I know that on the Windows 8 laptop I have to define a local port for the network printer, but when I try to do it I get "Access denied" error message. Win7 denies access from Windows 8. This is strange, because Win7 does allow access to XP. On the WIN7 computer, under printer properties/security, print permission is granted to "Everyone".
So what could be the reason for the "Access denied" error? I guess it has to do with security / users / permissions, but I cannot find a solution.
View 2 Replies
ADVERTISEMENT
Apr 25, 2014
I've once again encountered this problem with my Canon PIXMA MP620 printer/scanner: when using it wirelessly, it can't print. According to 'Devices And Printers', it's offline and therefore most programs I use in Windows 8.1 claim it can't print.
However, using Canon's program 'MP Navigator', it can scan from the printer without any problems. I can scan from the computer to the printer and the other way around. Therefore I'm suspecting that the problems lies with Windows 8.1 and not the printer. The connection is obviously there but Windows doesn't seem to think so.
I can't find a solution in the printer's manual, Windows doesn't give me anything when I try to troubleshoot the printer in question, and Canon's own 'Network IJ Tool' can find the printer but says it's doesn't work without clarifying why.
View 2 Replies
View Related
Jul 18, 2013
I have a home network with an XP system with a printer attached and shared. A Windows 7 laptop and my old XP laptop from work can print fine, but a new Windows 8 laptop won't print. Sharing from the XP system works as I can read files from the XP system on the new Windows 8 system. When I do an Add Printer on the Windows 8 laptop, I can see the network printer and install it and the driver so the printer shows up as installed on the Windows 8 system. The Print Test Page does not work nor printing from WordPad. I turned off the Firewall on the XP system in case that was the problem.
View 6 Replies
View Related
Jan 22, 2013
I have two laptops, Lenova with Windows 8 and HP Pavilion with Windows 8 pro. I have a HP Officejet 7560 hooked up to the Lenova.
When I try to access the printer from the HP, it can see the printer, but in trying to connect, Windows is telling me access denied.
If I hookup the printer to the HP, the Lenova can see it, connect to it and print to it just fine.
I have checked all the sharing and permissions settings on my Lenova, and everything should be set to allow another computer to access the printer, but it is still giving me the same message.
The Printer drivers are all up-to-date. I ran DriverScanner 2013
View 2 Replies
View Related
Sep 20, 2013
My new laptop that runs the despicable OS, Windows 8. I'm the ONLY user, the owner AND Administrator of my laptop, but I'm denied access to my own files!! I'm only a casual user, meaning I use my PC for "fun stuff"...i.e. writing & reading emails; playing games & searching the internet for things that interest me. I don't have anything on my PC that has to be "guarded" from others, as NO ONE ELSE uses my PC. That said, I should be able to access EVERYTHING on my PC, but the paranoid screwballs at Micro$oft have set up the most confounding OS, & I'm repeatedly denied accessing things like: Program Files, Pictures (even though I'm the one who put them there!!), Properties, etc. etc.
I know I'm not the only one who's been confronted with these problems, as I've read the same things repeated on sites in the many places I've visited in my attempt to figure out how to break the chains that Micro$oft has put on MY PC. How to change the settings so I can access my own stuff? I don't understand why MY computer is given the authority to DENY ME access to stuff I entered myself. When I couldn't view my OWN Pictures, (that I put here!!!), How I can use my own PC the way I want to...like the "good old days" of XP & even Vista HP?
View 3 Replies
View Related
Sep 5, 2013
I'm running Windows 8, (unfortunately), & I can't access certain files even though I'm the only one who uses this laptop & I'm also the Administrator. I tried numerous times to allow file sharing & change what I thought I should, but I kept getting red-lettered statements saying that I'm not allowed to make such changes.what steps to take so I can get to the files I need. There's no reason why I should be denied access to do anything when it's my own computer!
View 9 Replies
View Related
Mar 19, 2014
Alright, so I just recently got a new computer that has Windows 8.1, compared to my old one having Windows 7. I tried to transfer all of the files/folders over to the new one over the network and everything worked just fine. However, whenever I tried to modify any of the files that were transferred from the old one such as a png or txt file and overwrite the original through the program, I was always given an error box that said "access denied."
I'm pretty sure this is meaning that I need to get administrator privileges from the old PC, but I'm not sure how I would do that. My only option is to save the version to another folder then move it to where the original one was.
View 1 Replies
View Related
Sep 9, 2013
We just purchased a new office computer and it came equipped with windows 8. Everything seemed to set up wonderfully as I connected back up to the server we have here in the office that is running Windows 2008 Server. I set up my printers, I mapped the network drives I needed.
The problem I am having is that the mapped drives seemed to be "read-only." I can view and open all files, but I cannot save or create new folders on the drive. I have not changed anything on the server, as far as user settings or permissions because everything was working smooth on the former computer that ran WinXP.
I have checked the "manage your credentials" to ensure I have the proper Windows Credentials loaded. Below you will see a screen shot of what I keep running into.
View 5 Replies
View Related
Jun 18, 2013
I've recently made the move to 8 on my laptop and actually really like it. Now I've got an ubuntu 13.04 server with some samba shares set up that are completely visible on my Windows 8 laptop but when I try to access them I get Access Denied and it asks for my credentials again. I'm 1000% sure the details are correct, and I'm also sure it's a client side issue. I say this because there are 2 other PC's in my household, a win7 laptop and win7 desktop, both of which can access the shares when supplying the same credentials I do for my Windows 8 laptop.
View 1 Replies
View Related
Feb 6, 2013
I am in the midst of the final steps in setting my my new Win 8 system.
I have a Win XP and Win 8 computer on my home network. I believe that I have set up file and printer sharing correctly. I can access the files and printer on the XP system from the Win 8 system. However, when I attempt to access the Win 8 files from the Win XP system, I get a long delay (about a minute or two) and then it asks me for the User Name & Password. I enter them and then and it works fine.
If I try to print on the printer attached to the Win 8 system from the XP system, I get a printer error unless I have already signed in with the ID & PW when accessing files. It never asks me for an ID & PW before attempting to print.
On the Win 8 system, I have selected "Turn off password protected sharing" in the "Network and Sharing Center/Advanced Sharing Settings".
The Win XP system has previously been correctly sharing files and printers with another XP system for some time and I haven't changed any settings on the XP computer.
Both the XP and Win 8 systems are assigned the same Workgroup name.
View 9 Replies
View Related
Feb 6, 2014
I was able to print to my network-attached Brother 2070N and 3045CN laser printers until recently. Driver have been loaded, printers are discovered and added to the client, but every time I try to print I receive the message "Printer not ready". All of the Windows 7 clients can print to these 2 printers, it's just my 64bit Windows 8.1 Enterprise computer that cannot. If I can't get this resolved soon, I'll have to go back to Win7.
View 1 Replies
View Related
Apr 11, 2013
I'm having trouble connecting my wifi printer (Canon pixma mg3100) and my Lacie Network Space on Windows 8, while I haven't experienced any problems connecting these same devices to my Win7 computers.
The driver for the printer is, according to Canon, compatible with windows 8.When I install the software on both my windows 7 laptops, it immediately recognize the network and after 5 minutes I can print wireless without any problems.
However when I try to install the same software on my Windows 8 computer it keeps asking to first plugin a usb cable and do a lot of manual steps, like pressing several buttons on the printer, it's ridiculous! After a while the software succeeds in finding my Wifi but it keeps on saying 'unable to connect'
My Windows 8 laptop is a brand new Dell Inspiron and I didn't change any network settings.
View 9 Replies
View Related
Nov 19, 2012
Trying to delete a folder I get "Folder Access Denied" -- need to provide administrator permission to delete this folder. I am the only account on this PC an am Administrator. I click continue and get the same message with "Try Again".
View 3 Replies
View Related
Mar 9, 2013
This is a fairly new install of Windows 8 pro (within the last month), and while trying to set up a static ip up today I found that I was unable to access the network properties or disable the connection in the Network Connections. I am pretty stumped as I am the only user of this computer and from what I can tell have the correct permissions to do so. When trying to check the properties it tells me "an unexpected error has occurred" with no further information.
View 9 Replies
View Related
Nov 18, 2013
I'm having a pretty major issue with Skydrive on Windows 8.1. A vast majority of my files are unopenable from Explorer (or the Modern UI app which seems to just open them through explorer in the end anyway). When I try to open one of these files, I receive an error message titled "1 Interrupted Action" and displaying the message:
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search to solve this problem.
Error 0x80040A41: No error description available
I have yet to find anything even resembling a solution when I search for that error code. The options this error window gives me is to "Try Again" which presents a typical explorer progress bar that never goes anywhere or to "skip" or "cancel" which do the same thing. Essentially this means that I have to use the skydrive web client to download the file to some other location locally and then edit and reupload from there. As far as I can tell there also isn't a traceable logic to what files are going to be accessible and which ones are not. I could literally be just finished working on a file, save it, and have it inaccessible when I try to reopen it. This error has not improved or changed at all by my making any files "available offline" or "available online-only" (in fact clicking those options doesn't seem to actually change their Availability that is listed in explorer).
I've used Skydrive for a few years now (since the beta I believe) as my primary cloud storage service, I pay for Office 365, and therefore I have access to a larger amount of storage on Skydrive than I do on other cloud services. I'm using Google Drive temporarily, but its incredibly inconvenient given how invested and reliant I've become to Skydrive.
Any way of resetting or jarring Skydrive on 8.1?
View 1 Replies
View Related
Mar 13, 2014
I have a home wired LAN with the following configuration:
1) A Win 7x64 PC (static IP)
2) A Win 8.1x64 LAPTOP (static IP)
3) A Synology NAS (static IP)
3) A TP-LINK TL-R600VPN Wired Router connected to a cablemodem (internet access WAN) and to the switch.
4) A Trendnet 8 port switch connected to the 3 clients (PC, Laptop and NAS) and to the router (TP-LINK)
I have created a Windows Homegroup (Home/Private) from either the PC or Laptop going step by step as per these instructions and making sure that in both the PC and Laptop all requirements are met (required services, adapter settings, etc). The Homegroup is created successfully but the following issue arises:
- From the PC I can access shared files in the Laptop (by going to Windows Explorer/Network for example). From the PC I can also access the NAS shared files.
- From the Laptop, even though the Homegroup shows "Joined", I cannot access any shared file in the PC or NAS (it will show Error 53, network path not found). If I try to map a network drive (to directly access a shared folder in either the PC or NAS), it will also display an error saying that the network path cannot be found. However from the laptop I can access the NAS using the browser (Firefox, IE, etc).
So what is preventing the access to shared folders in the LAN from the laptop?
View 9 Replies
View Related
Mar 1, 2013
On my home network, I have my desktop, my HTPC (wired) and my wife's laptop (Wifi). The desktop and HTPC are bth running Win 8 pro. The laptop is running Win 7. All are 64 it.
Invariably I try to log onto my HTPC from my desktop and it says that I am unable to access the files. I then open up network and sharing center to check on the network password only to find that is has changed itself somehow. Even after I reset the password on both the HTPC and the desktop. I still cannot access my shared files on the HTPC from the desktop. The only way to share files is to get them from the HTPC which for some reason lets me access my desktop files.
The laptop is not really an issue. ONce I enter the new password I can access files on the desktop and print no problem. I guess the 2 issues are...
1) the random changing of the network password
2) the inability to access networked files FROM the desktop. The reverse seems to work flawlessly.....
View 3 Replies
View Related
Jan 10, 2014
I have a bunch of folders that are shared from external hard drives, connected to my new windows 8 machine.
Other computers/phones/tablets at home on the same network can access folders from the internal HD on my main computer.
But, with shared folders from external hard drives - despite showing up while accessing the network cannot be opened or read from connected devices or other computers on the network.
I'm a relative amateur when it comes to networking but I did not have this issue with my older windows 7 home computer.
View 3 Replies
View Related
May 3, 2013
As the title says, I'm getting a box saying "An unexpected error has occurred" whenever I try and access the properties window for my ethernet adapter. An unexpected power outage earlier in the day rendered my Windows 8 installation half messed up, leaving most of my drivers corrupt, so I had to attempt a refresh today, which solved most of my problems.
Unfortunately others like this have been cropping up since the refresh. I've looked for other possible solutions to this problem, and none have worked so far. Re-registering DLL files solved nothing, a system file check didn't do anything, and making sure I was in the correct user groups didn't solve anything either.
View 3 Replies
View Related
Jun 3, 2014
Had drive problems with PC so got new SSD drives and a Hybrid drive.All new drives so did tortuous route install win7 - upgrade to win 8.0 all worked then started acting up. My tech support worked on it for 2 days and gave up said I should backup and do a clean install from start. So I did.
Not yet put any backup files on so only operating system and devices (printer, wireless keyboard/mouse, wireless headset and 3webcams ( One Pluscom and two PCline ) checked device manager and found cameras with yellow exclamation mark and checked properties and saw this webcam.JPG . Download, install and do a reboot and see what happens.
[URL]
I am obviously logged in as admin as I am the only user who Can use PC and checked permissions which are OK all users having full access.
View 6 Replies
View Related
May 28, 2014
I am unable to install the drivers for my NIC's getting the error 'Invalid data as shown in the images below'.
It has previously been working fine on all adapters but I needed to uninstall the network cards as HyperV was throwing up an error when creating virtual switches which may have caused this?
PS C:UsersJGAdmin> get-netadapter
Name InterfaceDescription ifIndex Status MacAddress LinkSpeed
---- -------------------- ------- ------ ---------- ---------
Ethernet 40 Intel(R) PRO/1000 PT Dual Port Netwo... 117 Not Present 0 bps
Ethernet 39 Broadcom BCM5709C NetXtreme II Gig...#2 132 Not Present 0 bps
Ethernet 38 Intel(R) PRO/1000 PT Dual Port Net...#2 131 Not Present 0 bps
Ethernet 37 Broadcom BCM5709C NetXtreme II Gi...#50 130 00-26-55-1A-A8-4A 0 bps
Ethernet 34 Intel(R) PRO/1000 PT Dual Port Net...#3 127 00-1F-29-56-C2-51 0 bps
Ethernet 33 Intel(R) PRO/1000 PT Dual Port Net...#4 126 00-1F-29-56-C2-50 0 bps
vEthernet (VLAN3 (Desk... Hyper-V Virtual Ethernet Adapter #3 71 Not Present 00-1F-29-56-C2-51 0 bps
vEthernet (VLAN2 (Serv... Hyper-V Virtual Ethernet Adapter #2 64 Up E8-39-35-14-23-2C 10 Gbps
I have tried numerous drivers with no luck all getting the same error.
The box has alot of data on it so I would rather not have to do a clean install.
View 9 Replies
View Related
Feb 27, 2013
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
View 5 Replies
View Related
Jul 17, 2014
I created a HOMEGROUP on computers A with PRINTER hooked up.. No problem with A, B, C printing.
Now I hooked up PRINTER to computers B. Computers A, B, C do not print (unless I hook up to A).
IMHO if all computers are on the same home network, they should be able to share the same functions. What should I do to hook up the printer to B and A, B, C will print?
View 2 Replies
View Related
Mar 6, 2012
I have installed windows 8 consumer preview.I have also installed my printer drivers and they installed correctly, but problem is that my printer can't print anything(test page also).My printer is HP Laser-jet 1020.
View 9 Replies
View Related
Oct 22, 2013
I have a windows 8 64 bit system. There is a laptop with windows 7. I have my canon mp470 printer plugged into the windows 8 system via usb. Up until a few days ago we could printer from the windows 7 laptop through the network. I have done 2 things since then. 1.) I uninstalled mcaffee internet security and installed nortons internet security and 2.) I tried to update to windows 8.1 which failed part way through the update then it said the system was reverting back to windows 8.0
Now I can't print from the laptop. (nothing changed on the laptop only on the windows 8 system).
View 3 Replies
View Related
May 29, 2014
I'm working at an office where when you hit the Print Screen button, it causes a printout in addition to the normal copy to clipboard. I just want to copy to clipboard without wasting toner and paper. It can't be a program on the computer as it's clean with just Windows 8.1
It actually happens on all the machines (whether Windows 7, 8, or 8.1). Is it a program installed on the server? Is it a setting in Windows? How do I stop this behavior?
View 5 Replies
View Related
May 28, 2014
I'm using Windows 8.1 Professional. After the update to 8.1, I can't connect to my network printer which is connected to a Windows XP Home machine. Everything was working before the upgrade. I can currently see, connect, access and modify files on all the computers. I keep getting a message that I don't have permission to access the printer and I can't access the permissions on the Windows XP computer. I'm also using a Windows 7 computer which has no problem accessing the printer.
View 7 Replies
View Related
May 31, 2014
if it's possible to change the name of A to B? B is correct. BTW it's the same printer.
View 5 Replies
View Related
Sep 15, 2014
I have a USB printer connected to an 8.1 system. This printer is shared. I don't like keeping the computer on 24/7 so I set it to sleep.
Is there a way to send a wake command to the system when I want to print? WOL is working on the system. I noticed Homegroup has the option to wake the computer to view shares (and that does work).
If I can't wake the computer before a print job, what is the best practice to conserve energy on a system that is primary used as a print server?
View 9 Replies
View Related
Oct 29, 2013
I had a Windows 7 environment and just recently purchased a Windows 8 laptop.. .well win 8.1 Pro to be exact. On all of my windows 7 machines I can ping 192.168.1.199 and get solid response and go to that address in the browser and no issue. On the new Window 8.1 laptop I ping that address and sometimes get 1 timeout with 3 responses... other times it just times out and sometimes I get all 4 replies... The print server has a web interface but I am unable to connect to it at all - is there something I need to set in Win 8?
C:UsersRon>ping 192.168.1.199Pinging 192.168.1.199 with 32 bytes of data:
Reply from 192.168.1.199: bytes=32 time=4ms TTL=64
Reply from 192.168.1.199: bytes=32 time=3ms TTL=64
Reply from 192.168.1.199: bytes=32 time=2ms TTL=64
Reply from 192.168.1.199: bytes=32 time=2ms TTL=64
Ping statistics for 192.168.1.199:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 2ms, Maximum = 4ms, Average = 2ms
Then I get
C:UsersRon>ping 192.168.1.199
Pinging 192.168.1.199 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.1.199: bytes=32 time=6ms TTL=64
Ping statistics for 192.168.1.199:
Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
Minimum = 6ms, Maximum = 6ms, Average = 6ms
View 4 Replies
View Related
Feb 4, 2014
My friend got a new computer and is trying, unsuccessfully, to connect to a network printer that he says he has used in the past, in his one man office. He gets his internet access through a wireless router. But the printer is connected via Ethernet cable to a second router that does not have internet access, but does have two printers connected to it.
So his new computer is connected to two different networks, the wireless network, and the wired network. I'm not familiar with having your computer connected to two networks simultaneously.
So my question is, is there any problem doing it like this, and should the network printers show up when the computer does a search in Add Printer? Because it does not find anything right now, not sure if we need to be looking at the printers, the router, or the computer.
He is not able to connect the printers to the wireless router, they are in different rooms. And there are no other computers connected to either network right now.
View 1 Replies
View Related
