Hardware Drivers :: Unable To Install Webcam Drivers - Access Is Denied
Jun 3, 2014
Had drive problems with PC so got new SSD drives and a Hybrid drive.All new drives so did tortuous route install win7 - upgrade to win 8.0 all worked then started acting up. My tech support worked on it for 2 days and gave up said I should backup and do a clean install from start. So I did.
Not yet put any backup files on so only operating system and devices (printer, wireless keyboard/mouse, wireless headset and 3webcams ( One Pluscom and two PCline ) checked device manager and found cameras with yellow exclamation mark and checked properties and saw this webcam.JPG . Download, install and do a reboot and see what happens.
[URL]
I am obviously logged in as admin as I am the only user who Can use PC and checked permissions which are OK all users having full access.
View 6 Replies
ADVERTISEMENT
Jan 5, 2014
My model is HP Pavilion Slimline s3760in Desktop PC
HP Pavilion Slimline s3760in Desktop PC Product Specifications -- In product specifications you can notice that my OS was shipped with Windows Vista Home Premium with Windows Media Center (32-bit) with Vista Service Pack 1
In NVidia website it has mentioned that all the oem model should download from manufacture like hp, dell website only.
IF you check driver update for this model for windows vista 32bit you will notice original driver like keyboard, nvidia, etc.
Driver - Original (5)
Original Hauppauge WinTV HVR-1200 TV Tuner Driver 2008-11-18 , Version1.31.26252.0, 5.87M
Original driver for the Hauppauge WinTV HVR-1200 TV tuner solutions.
Original HP Multimedia Keyboard Driver 2008-11-14 , Version1.0.7.1, 6.09M
Original driver for the HP multimedia keyboard solutions.
[Code] ......
So my queries is that i have recently installed windows 8.1 and i wanted these original files to be installed but dont know which one to pick from vista drivers or windows 7 drivers? but windows 7 drivers are latest when compare with vista. Or should I download nvidia drivers from nvidia website? and also same goes with realtek audio driver from realtek website?
View 2 Replies
View Related
Nov 14, 2013
So figured out my Windows 8 install was corrupt so I decided to do a fresh install of Windows 8 Pro 64-bit.
Formatted my drives and proceeded to install Windows 8 successfully. While installing all of my drivers every single one of them installed perfectly fine besides IntelRST.
It seems to time out every damn time. I tried to manually install it via device manager and it times out as well. I even reformatted and re installed Windows 8 still no go.
The crazy thing is when I try to manually install it via device manager it times out but the driver shows the correct date so I'm sort of at a loss right now.
Hardware
ASUS Z77 Sabertooth
Intel i7-3770k oc'd to 4.5GHz
2x Samsung 250GB in RAID 0
2x WD 1TB in RAID 1
32GB RAM Mushkin Enhanced Redline
Links to the Intel Log:
Log File
View 1 Replies
View Related
May 17, 2014
In continuation to my previous thread on this subject, I now have another network printer problem in the same system. I chose to open it in a separate thread because the previous one became too long.I have 3 PCs on my home network
1. Windows XP (SP3) desktop with HP6500 E709a USB printer.
2. Windows 7 (Ultimate SP1 64 bit) desktop with HP 1018 USB printer.
3. Windows 8 (64 bit) laptop.
All computers can see each other and share folders on the home network.
Computers 1 & 2 can freely print on their own printers, as well as on each other's printer. Computer 3 (Windows 8) can print on the HP6500 (which is connected to the XP computer), but cannot print on the 1018 printer connected to the Win7 computer.
I know that on the Windows 8 laptop I have to define a local port for the network printer, but when I try to do it I get "Access denied" error message. Win7 denies access from Windows 8. This is strange, because Win7 does allow access to XP. On the WIN7 computer, under printer properties/security, print permission is granted to "Everyone".
So what could be the reason for the "Access denied" error? I guess it has to do with security / users / permissions, but I cannot find a solution.
View 2 Replies
View Related
Apr 23, 2014
I'm trying to use my 3tb external hard drive with my new Toshiba laptop running Windows 8.1. At first the computer recognised the drive, but when I tried to open the files I wanted, (masses of JPEG and RAW photo-files) they did not appear. There were four files listed..all of which were used to run the drive itself...no folders visible at all.
I figured there might be a problem with access so went to a number of possibilities and altered all manner of permissions and sharing options to what I thought would work. The upshot is that now the drive comes up as 'Location Unavailable'...access denied.
Previously I had used the drive on an ancient Vista machine, and still having this laptop, checked that the external drive was working,(it still is, with all files and folders still visible). I also plugged in my Sandisk Cruzer flashdrive and that opened no problems. right click on the drive>properties>sharing>advanced sharing>permissions>checked that 'everyone' was selected then allowed full control, change, read and then OK'd...still no difference.
View 1 Replies
View Related
May 24, 2014
System Specs:
-AMD FX-6350 6 core (CPU)
-Hyper 212 Evo (CPU Cooler)
-Asus GTX 670 2GB Top edition (GPU)
-Samsung 120GB 840 EVO SSD (OS Drive)
-WD Blue 1TB HDD (Storage/Game Drive)
-Asus M5A97 R2.0 AM3+ (MOBO)
-8GB 1600mhz Corsair Vengance Blue Ram (RAM)
-Seasonic M12II 620 Bronze 620GM2 80Plus (PSU)
-Display: Asus VH238H-P 23 Inch
-Corsair K70 Keyboard
-Logitech G400 Mouse
OKAY.. so I had Windows 7 64 bit installed for a while, then i decided to make the jump to Windows 8.1 when i found it on sale online.
I downloaded Windows 8.1 64 bit to a USB boot drive, but saved that for later and installed Windows 8.1 from the desktop as an "Upgrade" from my current system.
Then after installing all drivers and setting up my Windows Profile everything was perfect no issues, gaming was awesome, overall the system was great as it should. BUT one day (about 3 weeks after installation) i was playing League of Legends and my screen went black mid game. I reset the computer and from there on out I have been getting the black screen and have been unable to install the Latest and/or previous Nvidia Geforce Drivers(337.50) and every time I've had to Reboot in Safe Mode to uninstall the current drivers and or disable the "Video Adapter" to be able to access the desktop.
1st method: I tried everything from preventing Windows Update to install anything, and then downloading GeForce Drivers going into safe mode with not network access then installing from there but the installer would reach the "restart to install updates" then upon restart the black screens would occur.
2nd Method: Tried to allow windows to install drivers on It's own and it did install the "Officially" drivers 335.23 but they failed to install just as the previous method did.
3rd Method: Removing Re-seating the RAM, and Video Card and checking cables and fans making sure everything was functioning properly. after removing and re-seating the Components I tried methods 1 and 2 a few times with no success.
View 9 Replies
View Related
Feb 23, 2013
I have a hard drive I used as a backup on my old Win XP computer. I tried to install it on my new Win 8 64 bit computer. At first the new computer booted but no second drive visible. I then rebooted to find the BIOS and the machine came up with "Computer needs Repair". I removed the second drive and the newer computer is running OK.
View 3 Replies
View Related
Feb 17, 2014
I have upgraded to 8.1 from 8(OEM) through the Store, when I tried to install the ELAN driver for 8.1 from Acer, installer says the driver installed but in device manager it shows only "PS2 compatible driver", the old driver works but it doesn't include "ETDctrl.exe" in Startup, I have to manually start it by going to Control Panel, HW and Mouse. Is there anyway I could make ETDctrl.exe start when windows start?
View 3 Replies
View Related
Dec 3, 2013
I have dell inspiron laptop and 32 bit windows-8. My laptop has inbuilt webcam and it was working fine. But i installed a new external webcam. And both the webcams stopped working. I tried installing driver software from the driver-DVD of my laptop but it also didnt fix it.
The webcam cannot be used by other softwares like skype.
View 2 Replies
View Related
Sep 2, 2013
HP's support site for the specific model M6-1035 lists no driver for the webcam. it was there under windows 7 but I don't recall ever deliberately installing a driver for it - I assumed win7 had it.
Windows 8.1 does not. nothing in 'devices', nothing under device manager, and no driver listed on the HP support site. the latter is not surprising since they don't provide a host of drivers for the laptop.
No keyboard-specific drivers [like for the function keys etc], wrong firmware for optical, and other small things.
Any generic cam driver that will function?
View 2 Replies
View Related
Dec 18, 2012
before purchasing I wanted to confirm if Logitech C110 webcam is compatible with Windows 8. I could not ensure the compatibility from Logitech website.
View 8 Replies
View Related
Oct 11, 2011
How to get Dell's Integrated webcam to work? I have drivers install apparently (according to device manager), yet I'm unable to access the webcam.
View 9 Replies
View Related
Sep 14, 2013
Webcam shows picture upside/down. What to do to get picture in right position?
View 3 Replies
View Related
Dec 10, 2013
I have a DELL Inspiron 15 3521 running Windows 8.1 x64. Whenever I wake up the computer after hibernating my webcam is not working properly. A yellow exclamation mark is shown on the entry "Intel 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D" under USB Controllers in Device Manager.
View 2 Replies
View Related
Oct 31, 2013
I have a Dell E5530 using windows 8.1 Been using laptop for 5+ months. For the first time today, I clicked the Camera panel and received msg
"Connect a Camera".
Ran Dell PC diagnostics, no errors were found. I do not have a Imaging Device folder (that stores the Webcam) in Device Manager. Installed Dell Webcam Central, but when launched, I get msg "Please plug in a supported device" I am not able to run this application either.
Do I need to load any Webcam drivers for win 8?
View 2 Replies
View Related
May 25, 2013
Windows 8 Pro with Skype 6.3.0.107 - device manager shows no errors (webcam driver version 1.0.3.37), Skype can see the spc900nc integral mic but cannot see the webcam.
PS: For the record the win 7 compatibility report says the webcam is compatible.........
View 4 Replies
View Related
Sep 9, 2013
This Emachines E525 Laptop has a built in Camera and i wanted to use it to Recode video and save it onto my hard drive
i am trying to recode a video using my laptop camera so i will save the video in my hard drive
so first issue the driver wont work after installing the camera driver the application start and close
no error
I tried manycams and other 3 software like easywebcam and so on and non of the would see webcam installed
I am not trying to chat or skye or anything i would love to have webcam working so i can recode the video and save it in my hard drive. what i need:
1- to get webcam working
2- Find a software that is able to recode a video and save it into the hard drive
View 1 Replies
View Related
Jun 28, 2014
while manipulating properties of c drive ,i accidentally denied all permissions to Authenticated users .error: couldn't access control editor,i didn't getting access to change them even i logged as an administrator .how do i change those properties and get access to them.
View 3 Replies
View Related
May 5, 2013
i am currently using windows 7 .i m planning on installing windows 8.I have a i3 machine with intel DH55PJ board.when i went ti intel website i didn't see any network graphics or audio drivers for windows 8. is their any way i can use windows 7 drivers in windows 8.
View 3 Replies
View Related
Sep 15, 2014
I have recently bought a ASUS X550LC Laptop in that. i was trying to install bluetooth drivers but it crashes frequently during the installation. i have tried a lot and i cant able 2 solve the problem.
View 2 Replies
View Related
Jan 17, 2014
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
View 2 Replies
View Related
Apr 24, 2014
In windows 7 missing drivers were automatically install upon restart,is this missing in win 8.1?
View 4 Replies
View Related
May 31, 2014
When I tried to install lan drivers in my pc(dg41RQ mother board) through drivers cd, lan driver is not installing, it is getting failed for windows 8.1.
View 2 Replies
View Related
Jun 22, 2013
I have an Asus P8Z77-V Deluxe. It replaces a motherboard that failed. I have moved the Win 7 image over to the new board using a "restore to other hardware" feature in a backup program. It did not work properly. I am not able to get some drivers to install. For various (and sufficient) reasons I really really don't want to do a clean install. When I first booted, it would not even boot until I used Win PE to repair the boot. Various squirrely things are still wrong. Like not being able to see more than one hard drive. Occasional crashes for no obvious reason.
For an SATA controller when I run update driver or running the Intel INF setup program provided by Asus I get a message:
7 series/C216 SATA AHCI controller 1E02 Also This operation requires an interactive windows station.
I have just run the Intel update program and it says it can't identify a device an I need to contact the board manufacturer.
An alternative I am considering is to install a Win 8 update over the Win 7 telling Win 8 to retain my programs, settings, and data. But I am not sure this will get me where I want to go. My major question about that is will the Win 8 installation be clever enough to use all of the driver files from Asus that I have downloaded (and I point it to) rather than installing something like the incorrect ones currently installed?
View 5 Replies
View Related
Sep 27, 2011
When I try to install with ahci on it informs me it cannot install the os on my hardware... or, interestingly, it somehow manages to install fine, randomly, but when i restart after completion i get the nice new bsod.
Or when I turn ahci on in bios after installing with ide I get bsod.
I know how to turn ahci support on through the reg in windows 7 but that specific key isnt there anymore.
e/ the reason i'd like this is for dual boot. I cant boot into osx in ide / cant boot into Windows 8 in ahci
View 5 Replies
View Related
Feb 2, 2014
I've tried both with soundblaster sound card and NVidia graphics card. It just don't want to install the 64 bit drivers ...
View 3 Replies
View Related
May 2, 2013
I have a notebook with win 8 and when I click on camera I see a gallery of my photos and videos but I don't see how can I take more photos.
I took some photos, and made some videos, now I'm stuck in this "gallery"
When a menu appear is like: "crop ------ delete"
How can I come back to the default menu?
View 2 Replies
View Related
Nov 4, 2013
For some reason I cannot do anything in my Program Files for one of my hard drives. My C drive seems to be fine, as well as my 2 other drives. But in my F drive, Ive broken down the program files into a normal one and x86 one. I can basically access every other folder expect the Program Files in F drive. Program Files (x86) in the same drive works perfectly fine. Everytime i try to add a new folder or delete anything in my Program Files folder it says destination folder access denied and i need permission.
Ive tried fiddling with all the UAC and permissions but nothing seems to work.I even tried the command prompt :
"4. To Take Ownership of a Folder or Drive in a Command Prompt. NOTE: This command will take ownership of the folder or drive, and all files and subfolders in the folder or drive."
method but it says Access is Denied in my command prompt.
View 9 Replies
View Related
May 19, 2013
So I use a program called crashplan to back up all my data, but the program began crashing whenever I open it. I would open it, the program would bgin running for a few seconds to a minute then just go away, close with no message.
SO I emailed crashplan and they told me to do this:
It appears that the CrashPlan backup engine is running out of memory. Please follow the instructions below to allocate more memory to the CrashPlan backup engine. Running Notepad or any other text-editor as an Admin, edit the CrashPlan engine's CrashPlanService.ini file to allow it to use more java memory:
1- Stop the backup engine: [URL] .....
2- Locate the Notepad program, right-click and Launch as Administrator
3- Go to File > Open, and navigate to C:Program FilesCrashPlanCrashPlanService.ini (note that you will have to change the option from .txt files to all files in the file selection screen in order to see the CrashPlanService.ini)
4- Find the following line in the file: -Xmx512m
5- Edit to something larger such as 768, 896, or 1024. E.g.: -Xmx1024m
This sets the maximum amount of memory that CrashPlan can use. CrashPlan will not use that much until it needs it. I would recommend starting out setting it to 768, and go higher only if you continue experiencing problems. You can set it as high as 2048 on 32-bit systems, or even higher on 64-bit systems. 6- Start the backup engine.
So I tried it but I couldn't save it, I got an error message that said "Access is Denied".
View 3 Replies
View Related
Oct 9, 2012
I am getting access denied when attempting to get into a folder. Just recently installed Windows8. I had the same issue with win7, but I managed to resolve it. What do I need to do to get around this? I don't remember ever having had a problem with simply getting into one of my own folders.
View 3 Replies
View Related
Jan 22, 2013
I have two laptops, Lenova with Windows 8 and HP Pavilion with Windows 8 pro. I have a HP Officejet 7560 hooked up to the Lenova.
When I try to access the printer from the HP, it can see the printer, but in trying to connect, Windows is telling me access denied.
If I hookup the printer to the HP, the Lenova can see it, connect to it and print to it just fine.
I have checked all the sharing and permissions settings on my Lenova, and everything should be set to allow another computer to access the printer, but it is still giving me the same message.
The Printer drivers are all up-to-date. I ran DriverScanner 2013
View 2 Replies
View Related
