Hardware Drivers :: Asus P8Z77-V / Can't Install All Drivers
Jun 22, 2013
I have an Asus P8Z77-V Deluxe. It replaces a motherboard that failed. I have moved the Win 7 image over to the new board using a "restore to other hardware" feature in a backup program. It did not work properly. I am not able to get some drivers to install. For various (and sufficient) reasons I really really don't want to do a clean install. When I first booted, it would not even boot until I used Win PE to repair the boot. Various squirrely things are still wrong. Like not being able to see more than one hard drive. Occasional crashes for no obvious reason.
For an SATA controller when I run update driver or running the Intel INF setup program provided by Asus I get a message:
7 series/C216 SATA AHCI controller 1E02 Also This operation requires an interactive windows station.
I have just run the Intel update program and it says it can't identify a device an I need to contact the board manufacturer.
An alternative I am considering is to install a Win 8 update over the Win 7 telling Win 8 to retain my programs, settings, and data. But I am not sure this will get me where I want to go. My major question about that is will the Win 8 installation be clever enough to use all of the driver files from Asus that I have downloaded (and I point it to) rather than installing something like the incorrect ones currently installed?
I have recently bought a ASUS X550LC Laptop in that. i was trying to install bluetooth drivers but it crashes frequently during the installation. i have tried a lot and i cant able 2 solve the problem.
I just installed a fresh copy of windows 8.1 on my Asus N53S laptop that comes stock with Windows 7 and now my keyboard shortcuts for volume do not work. Above the F1-F4 keys i have three buttons to mute, increase and decrease the volume which do not work. The keyboard shortcut's for muting, decreasing and increasing volume do not work either (Fn+F10-F12) but the shortcut for decreasing brightness and turning the screen off works (Fn+F5-F7) If there is any way to get this working again.
I have a ASUS N56VM laptop, I have upgraded to Windows 8.1 Pro a few months ago (free DreamSpark account) and I can't get USB 3.0 to work at the speeds at which it needs to work. An 3GB ISO which I copy from my HDD to an USB3.0 USB-stick gets a max speed of 25 mb per second. I have already tried everything I could think of, including the following:
Upgrading Intel chipset drivers from ASUS support site (delete old, install new)Upgrading BIOSINF hack (Windows 8 and Intel USB 3.0 Host Controllers | Plugable) "Windows 8* has a native in-box USB 3.0 driver. Intel is not releasing a specific Intel USB 3.0 eXtensible Host Controller Driver for Windows 8."
The driver I have is: imgur: the simple image sharer
The only thing I can think of is maybe mailing ASUS if they can supply a new BIOS revision or mailing Intel if they can supply some new chipset drivers...
EDIT1: A few months back, when the laptop was still running Windows 7, the read/write speeds were "normal", meaning that they were what you would expect from USB 3.0.
Had drive problems with PC so got new SSD drives and a Hybrid drive.All new drives so did tortuous route install win7 - upgrade to win 8.0 all worked then started acting up. My tech support worked on it for 2 days and gave up said I should backup and do a clean install from start. So I did.
Not yet put any backup files on so only operating system and devices (printer, wireless keyboard/mouse, wireless headset and 3webcams ( One Pluscom and two PCline ) checked device manager and found cameras with yellow exclamation mark and checked properties and saw this webcam.JPG . Download, install and do a reboot and see what happens.
[URL]
I am obviously logged in as admin as I am the only user who Can use PC and checked permissions which are OK all users having full access.
My model is HP Pavilion Slimline s3760in Desktop PC
HP Pavilion Slimline s3760in Desktop PC Product Specifications -- In product specifications you can notice that my OS was shipped with Windows Vista Home Premium with Windows Media Center (32-bit) with Vista Service Pack 1
In NVidia website it has mentioned that all the oem model should download from manufacture like hp, dell website only.
IF you check driver update for this model for windows vista 32bit you will notice original driver like keyboard, nvidia, etc.
Driver - Original (5) Original Hauppauge WinTV HVR-1200 TV Tuner Driver 2008-11-18 , Version1.31.26252.0, 5.87M Original driver for the Hauppauge WinTV HVR-1200 TV tuner solutions. Original HP Multimedia Keyboard Driver 2008-11-14 , Version1.0.7.1, 6.09M Original driver for the HP multimedia keyboard solutions.
[Code] ......
So my queries is that i have recently installed windows 8.1 and i wanted these original files to be installed but dont know which one to pick from vista drivers or windows 7 drivers? but windows 7 drivers are latest when compare with vista. Or should I download nvidia drivers from nvidia website? and also same goes with realtek audio driver from realtek website?
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
When I tried to install lan drivers in my pc(dg41RQ mother board) through drivers cd, lan driver is not installing, it is getting failed for windows 8.1.
So figured out my Windows 8 install was corrupt so I decided to do a fresh install of Windows 8 Pro 64-bit.
Formatted my drives and proceeded to install Windows 8 successfully. While installing all of my drivers every single one of them installed perfectly fine besides IntelRST.
It seems to time out every damn time. I tried to manually install it via device manager and it times out as well. I even reformatted and re installed Windows 8 still no go.
The crazy thing is when I try to manually install it via device manager it times out but the driver shows the correct date so I'm sort of at a loss right now.
Hardware ASUS Z77 Sabertooth Intel i7-3770k oc'd to 4.5GHz 2x Samsung 250GB in RAID 0 2x WD 1TB in RAID 1 32GB RAM Mushkin Enhanced Redline Links to the Intel Log: Log File
My roommate has a custom desktop PC, which runs Windows 8 x64.
It can't connect to the internet, or the local network. Windows says limited connection, but ping the router IP yields only lost packages. Solving the error with the automatic error solver, displays problems with the DNS.
The roommate says the connection has worked for a limited time, for about a 1/2 hour, but fell out from time to time.
He has tried to connect to our wireless router, a wireless n d-link dir615. It is set to WPA/WPA2 with AES cipher and PSK.The router runs the newest firmware available, which gives no issues for any other device in the house. (Including Iphones, android phones, old and new N-capable, and N-incapable laptops and desktops).
His PC has an almost unused Asus PCE N15 wireless adapter installed.He says it worked on a different network (He just moved in).
I have tried to give him a static IP and dns, both in windows, and get the router to assign one to him.
I have tried to give him an alternative DNS, e.g. OpenDNS.
I have tried to update his drivers, both the ones provided from Asus, but also one from realtek, since the NIC has a realtek chip on it.
I have an Asus P5QL VM DO montherboard in my homemade PC. This is an older system that I use for testing, so I put my Windows 8 install on it. Unfortunately, the Asus driver installation CD will not run in Win 8, and I am missing one driver which I am unable to locate anywhere. It is for the PCI Simpe Communications Controller.
I have recently built a new computer and installed Windows 8. All was running fine (including USB devices such as iPhone, flash drive etc), however since upgrading to Windows 8.1, none of my USB devices are showing up at all. Oddly, the mouse and keyboard still work.
When I go into the BIOS, all my devices (iPhone, Flash drive, keyboard and mouse etc) all show up in there, so I'm guessing it's a driver/Windows 8.1 issue that I'm missing?
I have been to the ASUS website and downloaded all the drivers I can find, but still no luck.
My motherboard is an "Asus Z97 Pro". I have tried contacting Asus support, but they are completely useless!
I have an ASUS S400CA running Windows 8.1 (64 bit) and I am having a major issue. When I click Fn + F5/F6 to increase or decrease the brightness, nothing is happening. The slider is stuck beyond a point and the brightness does not change regardless (it is stuck at the highest setting). I have tried to fix this issue by changing brightness settings in the Control Panel, Battery Options, etc. but nothing is working.
I have tried to find previous versions of the Intel HD Graphics 4000 Driver on the Asus website but only find the one I am using. What should I do?
I have a CM6730 Asus PC with a P8H61-M PRO/CM6630 motherboard.
I was having problems getting good Graphics performance and the topic of Integrated vs discrete GPU came up, the options in the BIOS were set to use iGPU, since then I do not get the option on boot to enter the BIOS.
I have tried ASUS but they want me to send the unit in for repair.
I have an Asus CM6730 PC, bought in October, which had Windows 8 installed on it.
Everything was fine, until I decided to install the upgrade to Windows 8.1.
After a week or so, my mouse started to freeze up randomly and the only way to log out of the PC was by holding the power button down for several seconds. The next day, I was working on the PC, took a phone call and the machine went into standby mode - but wouldn't come back on when I press a key / moved mouse.
At that point I decided to restore the machine back to factory settings. This was done successfully so I was back to Windows 8. However - my problems have got worse - and now I am at the stage where the PC wont even boot up in Safe Mode - the screen just goes black.
I have read up on a few sites and I believe it could anything from driver related - to a faulty motherboard.
My Q200E Asus laptop came with 4g of memory. I would like to add another 4g's to bring it up to 8g's. I can find no instructions for doing this and am not entirely sure if it can be done. I have removed the back cover and see no memory sticks at all.
I bought an Asus n53sv-eh72 laptop which comes with one USB 3.0 port. In Windows 7 it was working just fine, but after Windows 8 has been installed the USB doesnt work anymore. When I insert any flash drive windows has no reaction.
Ive been trying to find a driver but I couldnt find one that fits.
I know this port works cause Im able to boot windows throw a flash drive. It might be some driver missing.
I have an Asus x202e with I3, Windows 8 64 Bits. The defect is that the battery does not detect. Here's what I did: I disconnected the battery, I pressed the power button 30 seconds and not fixed. I reset BIOS F2, F9 and F10 and again not repaired. I uninstalled the Microsoft ACPI method battery and nothing. Do you think that a BIOS update will fix the fault? Mention that no longer turn on the battery.
Shouldn't my SSD be viewable somewhere in windows 8.1? It's not unallocated in Disk Utility, just not there, but I can see it in bios, although I can't set it as a boot option.
I'm confused because I thought my OS was on it, but I've been booting without it, so it may have never worked I've had this laptop for a little under 10 months.
I'm trying to confirm whether or not TRIM is actually working on my system and I can't find any definitive answers.
I'm on a new Asus G750JZ-DB73, which has dual SanDisk 128 GB SSDs in RAID0. I've heard that TRIM was incompatible with RAID, but I've also seen recent reports claiming that newer drives or motherboards or whatever did allow for TRIM with RAID drives. My knowledge if techese is limited, so I'm unsure what to believe.
Secondly, I've encrypted my SSD(s) using DiskCryptor without issue, and DiskCryptor claims full compatibility with both RAID and TRIM.
Here's where I get confused. Both CrystalDiskInfo and the "fsutil behavior query DisableDeleteNotify" command in Command Prompt indicate that TRIM is enabled on my system. However, when I use TRIMcheck, I'm informed that TRIM doesn't appear to be working.
How can I conclusively verify if TRIM is working for me? And if it isn't, is there a way to activate it on my system?
I've recently installed Windows 8 on an Asus X201E. There is an audible constant disk trashing, although the HDD LED doesn't blink & the Performance monitor in the task manager also doesn't indicate any excessive disk access (literally 0% when nothing is going on). What could cause this? Besides the annoying sound, I'm worried about the disk wearing out.
Asus Vivobook. It was running fine last night, but today it was a bit slow to respond. I eventually restarted it and it told me I have disk problems. Now I'm stuck on a black screen with the Asus logo that reads "Repairing disk errors. This might take over an hour to complete."
It's been this way for multiple hours now. I'm going to leave it overnight and hope it repairs, but, if it doesn't, is there anyway to recover my files? I have some important stuff backed up online, but I haven't backed up in a bit over a month and I don't want to lose my files. Most forums tell me to reinstall Windows 8? Would that make me lose my files, though, and how can I do that if I can't get past this error page?
I have an Asus laptop with Windows 8 64-Bit on it and I uninstalled AsusDVD after having some issues with it. After I did this my laptop no longer allowed me to play DVDs. Despite having Windows Media Player, which I know plays DVDs since I have it on my desktop.
Is there a way that I can change some settings to use Windows Media Player? When I open "Autoplay" Windows Media Player is not an option to play it on and there isn't anything else on my laptop that can play it. I tried a few different free DVD players, but none were able to play them for some reason.
How I can get Windows Media Player to play DVDs or suggest a free software that I can download that will play DVDs?
I have a Asus T100 tablet with 32GB SSD. I bought a 64GB SD card to augment the storage on the tablet. The problem I am having is that the SD card disconnects after a few minutes of no activity, I then have to take it out of the tablet and pout it back in. I then have the folder in my C Drive again. How do I prevent the SD card from disconnecting so that I can use it as additional storage?
we ordered a bunch of Asus T100TA transformer book tablets for a customer. One of them wouldn't recognize bluetooth or wi-fi and it had a problem with the Broadcom Serial Bus Driver over UART Bus Enumerator. After numerous driver downloads and installs and even a full factory restore (whatever option in windows 8 where it deletes everything and reinstalls the OS), the issue still persisted. Since the tablet was brand new, we just submitted a DOA request from our wholesaler and sent the tablet back. No big deal, figured it was a hardware issue. The other day, a Lenovo tablet came in with the EXACT same problem. Again driver installs, factory restore etc and the issue is still there. SO obviously it's not a hardware issue Again, both units have had drivers, bios and factory restores and the issue is still there, immediately after factory restore.
I have an older laptop TOSHIBA. According to Microsft is compatible with Windows 8 I also managed to install the new OS. But I need to install Windows 8 some older drivers (for example, Windows 7).
