Hardware Drivers :: Unable To Install Newer Driver For ELAN Touchpad
Feb 17, 2014
I have upgraded to 8.1 from 8(OEM) through the Store, when I tried to install the ELAN driver for 8.1 from Acer, installer says the driver installed but in device manager it shows only "PS2 compatible driver", the old driver works but it doesn't include "ETDctrl.exe" in Startup, I have to manually start it by going to Control Panel, HW and Mouse. Is there anyway I could make ETDctrl.exe start when windows start?
I was updating my drivers, and had wanted to update my Synaptics driver. I had removed the older version of Synaptics driver (because I was required to) and wanted to restart. My computer restarts, and I try to install the latest version of the Synaptics driver, it doesn't work. It says "install failed." I have tried multiple times.
Installed 32-bit Win 8.1 onto a Dell D610 (Pentium M 1.86GHz 2GB RAM) and it really works very well. Except for one nagging problem - the 4 left/right click buttons do not work! I have tried several drivers and all give full touch pad functionality (scroll and tap/click) and the keyboard stick works - but both sets of left and right buttons refuse to do anything. All worked with Win 7, so I assume it is a driver problem. I currently have a Logitech USB wireless mouse attached which works fine, but I would like to get the buttons on the laptop functioning.
Windows 8.1 NEW Flashed the MB BIOS to 1903. ( Completed ) ASUS MAXIMUS V EXTREME 1155 - Z77 Secure Erased the OCZ VERTEX 4 SSD's & updated the firmware to 1.5 ( SPOTLESS / COMPLETED ) Unhooked LAN connection ( STILL UNHOOKED ) Unhooked other drives ( STILL UNHOOKED ) Set Up Fresh NEW RAID0 w/Intel RAID controller used: Intel AHCI/RAID Driver Path for Windows Windows 8.1 32bit & Windows 8.1 64bit. Intel Rapid Storage Technology Driver software V12.8.0.1016 for Windows Windows 8.1 64bit---(WHQL). Intel Rapid Storage Technology Driver software V12.8.0.1016 for Windows Windows 8.1 32bit---(WHQL).
Ran the Chipset Driver: Intel Chipset Driver V9.4.0.1026 for Windows Windows 8.1 32bit & Windows 8.1 64bit---(WHQL). RAN it in compatibility mode as told! VARIFIED it to be installed!
Now when I go to install the VGA driver I get a dam error message
* This computer does not meet the minimum requirements for installing this software *.
Today I tried to install the new BETA driver for my Intel HD 4600 Integrated Graphics unit, however, regardless of installation through through my driver with the extracted driver-ware, or through an .exe nothing seems to work.
I either get the "system does not reach minimum requirements.", or "The driver being installed is not validated for this computer. Please obtain the appropriate driver from the computer manufacturer"
Had drive problems with PC so got new SSD drives and a Hybrid drive.All new drives so did tortuous route install win7 - upgrade to win 8.0 all worked then started acting up. My tech support worked on it for 2 days and gave up said I should backup and do a clean install from start. So I did.
Not yet put any backup files on so only operating system and devices (printer, wireless keyboard/mouse, wireless headset and 3webcams ( One Pluscom and two PCline ) checked device manager and found cameras with yellow exclamation mark and checked properties and saw this webcam.JPG . Download, install and do a reboot and see what happens.
[URL]
I am obviously logged in as admin as I am the only user who Can use PC and checked permissions which are OK all users having full access.
My model is HP Pavilion Slimline s3760in Desktop PC
HP Pavilion Slimline s3760in Desktop PC Product Specifications -- In product specifications you can notice that my OS was shipped with Windows Vista Home Premium with Windows Media Center (32-bit) with Vista Service Pack 1
In NVidia website it has mentioned that all the oem model should download from manufacture like hp, dell website only.
IF you check driver update for this model for windows vista 32bit you will notice original driver like keyboard, nvidia, etc.
Driver - Original (5) Original Hauppauge WinTV HVR-1200 TV Tuner Driver 2008-11-18 , Version1.31.26252.0, 5.87M Original driver for the Hauppauge WinTV HVR-1200 TV tuner solutions. Original HP Multimedia Keyboard Driver 2008-11-14 , Version1.0.7.1, 6.09M Original driver for the HP multimedia keyboard solutions.
[Code] ......
So my queries is that i have recently installed windows 8.1 and i wanted these original files to be installed but dont know which one to pick from vista drivers or windows 7 drivers? but windows 7 drivers are latest when compare with vista. Or should I download nvidia drivers from nvidia website? and also same goes with realtek audio driver from realtek website?
I tried all the different ways to install samsung usb driver but I couldn't. I installed samsung kies but didn't recognize the phone as well. i removed it and tried to download the update from windows and I got this message:
Now my Galaxy SII won't be recognized in windows 8. What should i do?
So figured out my Windows 8 install was corrupt so I decided to do a fresh install of Windows 8 Pro 64-bit.
Formatted my drives and proceeded to install Windows 8 successfully. While installing all of my drivers every single one of them installed perfectly fine besides IntelRST.
It seems to time out every damn time. I tried to manually install it via device manager and it times out as well. I even reformatted and re installed Windows 8 still no go.
The crazy thing is when I try to manually install it via device manager it times out but the driver shows the correct date so I'm sort of at a loss right now.
Hardware ASUS Z77 Sabertooth Intel i7-3770k oc'd to 4.5GHz 2x Samsung 250GB in RAID 0 2x WD 1TB in RAID 1 32GB RAM Mushkin Enhanced Redline Links to the Intel Log: Log File
I need to reinstall Windows 8 and it tells me that I need to load a driver before the install can begin. How to do that or where to find the driver for my computer (HP ENVY m6 1125-dx). I know for a fact that its my hard disk driver... SATA driver?
I installed Windows 8.1 a few days ago and now I am having problem installing and updating driver software for any hardware. I tried downloading drivers with Windows update which gives error code 8007000d while installing after successfull download while other software updates install fine. Using device manager, it gives a error that windows found the driver but had problem installing it.
And finally, I tried to install it directly using executable but couldn't install. For instance, I tried to install AMD Catalyst software and everything in it installed except the drivers, catalyst control center, hydravision and every application software installed but just not the driver software. I also had problem with bluetooth software. All drivers installed fine when I installed the windows 8.1 but after few days, this problem began and now I am not able to install any of it. P.S. I tried all the measures to solve error 8007000d I found at the internet.
I was installing the AMD beta driver and suddenly, black screen. It somehow restarted and I logged in, but I saw a black screen and after a few seconds, I was thrown back to the login screen. It was the same in safe mode! is there any way to uninstall the driver without a complete wipe? I don't want to start from the beginning again ...
My windows 8 pro x64 was running normal until I added a logitech cordless rumblepad 2 which uses a USB receiver for the joypad, and after installing the drivers and plugging in windows 8 shows a black screen on first boot but boots normal after a warm reset, this happens every time I switch on until i do a warm reset.
I work at a hotel, and we are having issues with our public computer (Acer Aspire XC-603G desktop) connecting to the internet. As it seemed like an issue in the wall, I decided the easiest way to fix it would be to buy a wifi USB adapter (NETGEAR N300) and just use that instead. However, when I try to install the driver from the included CD, it keeps giving me an "access is denied" error.
The account I'm using says it has administrator privileges, though that's been giving me issues as well. The person who initially set up the computer only set up one account, which anyone could use. I added another, gave it the administrator rights, and removed them from the original. However, even though it says the new account is an administrator account, messages often pop up and say that I can't do what I'm trying to do because I only have standard privileges.
I have a client running Windows 8.1. The original problem was that he could not install an HP 6700 printer, the installer package failed every time. I got the same error; I attempted to update all his drivers and noticed that all the installers failed. I then attempted to install it manually and I get a failure: Windows found drivers software for your device but encountered an error while attempting to install it. The data is invalid. I receive the same error if I try to install any driver the same way. Laptop is an Acer Aspire One running 8.1, there were no recovery discs made and all recovery options fail. Not sure where to go with this.
Previous summer I upgraded my computer to a more up to date with 8GB RAM. Inevitably, I had to backup my data and install 64-bit version of Windows 7. I could install and use most of my devices, except an old Pinnacle Studio Pro analogue TV tuner PCI card. After some search, I managed to find custom 64-bit drivers fot BT848/BT878 cards and instructions of how to sign them, so I could use them in normal mode. After following the instructions the drivers worked fine in Windows 7 Ultimate 64-bit! OK, the original application Pinnacle Vision didn't work since it looks exclusively for Pinnacle's own 32-bit driver, but I could use the card in Nero Vision, Pinnacle Studio Pro, VirtualDub etc.
How did the problem arised: I recently upgraded the computer to Windows 8 and then to 8.1 so I have the latest version. Some devices were replaced with Microsoft drivers and others were not installed. I downloaded latest OEM drivers and managed to make all devices work at their full potential again, except the Pinnacle TV tuner. I went to advanced startup options and loaded Windows 8.1 in the mode that ignores driver signature.
I then attempted to manually install the custom BT848 64-bit drivers from Device Manager, since there was no setup program. As you may know, the card appears as two devices in Device Manager. One for the video part and one for the audio part. The audio part completed sucessfully. But the video part displayed the message "Error 39: file not found". The same driver worked OK in Windows 7, so the missing files should be Windows 7 system files that are not present in Windows 8. Is there any way to see which files are these so I can copy them from a Windows 7 installation? How I can determine which file was not found when I see error 39? Is there a log file or what?
Although there are already quite a few drivers for Windows 8, I can't find an updated version fo the touchpad-driver /-software. I don't want to seem impatient, I'd just like to know if DELL is aware of this and if an ipdated version is planned.
Am using windows 8 pro with the synaptics drivers on my sony vaio, but they are taking ages to load in whenever I reboot/startup my laptop.
I was wandering if there are any tweaks I can do to make it load into my system tray quicker. I dont have many things loading at startup so I cant see what the problem is. I would like it to load in first rather than last.
OKAY.. so I had Windows 7 64 bit installed for a while, then i decided to make the jump to Windows 8.1 when i found it on sale online.
I downloaded Windows 8.1 64 bit to a USB boot drive, but saved that for later and installed Windows 8.1 from the desktop as an "Upgrade" from my current system.
Then after installing all drivers and setting up my Windows Profile everything was perfect no issues, gaming was awesome, overall the system was great as it should. BUT one day (about 3 weeks after installation) i was playing League of Legends and my screen went black mid game. I reset the computer and from there on out I have been getting the black screen and have been unable to install the Latest and/or previous Nvidia Geforce Drivers(337.50) and every time I've had to Reboot in Safe Mode to uninstall the current drivers and or disable the "Video Adapter" to be able to access the desktop.
1st method: I tried everything from preventing Windows Update to install anything, and then downloading GeForce Drivers going into safe mode with not network access then installing from there but the installer would reach the "restart to install updates" then upon restart the black screens would occur.
2nd Method: Tried to allow windows to install drivers on It's own and it did install the "Officially" drivers 335.23 but they failed to install just as the previous method did.
3rd Method: Removing Re-seating the RAM, and Video Card and checking cables and fans making sure everything was functioning properly. after removing and re-seating the Components I tried methods 1 and 2 a few times with no success.
I have a hard drive I used as a backup on my old Win XP computer. I tried to install it on my new Win 8 64 bit computer. At first the new computer booted but no second drive visible. I then rebooted to find the BIOS and the machine came up with "Computer needs Repair". I removed the second drive and the newer computer is running OK.
Recently I've upgraded my toshiba laptop with w7 to Windows 8.1 (without keeping any settings), but I cant get my synaptics touchpad to work.
Windows automatically installed some drivers for the touchpad but it didnt work. Then I downloaded newest generic drivers from synaptics website but they wouldnt install - I get an "installation failed" error without any elaboration.
So I've installed synaptics driver that was provided for my laptop for win 7. It installed nicely, but the touchpad still doesnt work - disabling/enabling it in synaptics tab in mouse settings doesnt change anything.
I thought that maybe now the generic driver will install that I have an older synaptics version installed and not some random windows driver, but no, the installation still fails.
The story unfolds :P Next I downloaded toshiba synaprics driver for win 8.1 that was developed for some newer laptop model as mine is no longer supported. The installation went smoothly but the touchpad still doesnt work.....
I fail to understand why on a laptop (which has no touchscreen) why you would want to have the swipe gestures?
Surely most folks don't look at the touchpad in use, so it is often that one starts off to the right (especially when the pad is off centre), and it is natural to move to the left to find where one wants to start - hey presto the charms bar opens, and if you're not carefull all sorts of events occur which you really don't want.
Any way on my Lenovo Z580 with synaptics 8.1 we have the worst of both worlds - there is no easy option in the Synaptics settings to turn off the gestures, so the option is to do registry editing to the key TouchPadPS2_3 - I have amended the Active Type dwords from 2 to 0. However there is a side effect of this.
When booting, there is now a delay till the process finishes - we now get blue circular processes next to the pointer for approx 40 seconds.
What other edits we need to make to remove this delay?
I reinstalled my 8.1 pro (legal copy, disk been fully formatted) and it was okay for few hours. Next time im starting the laptop, my keyboard and touchpad doesnt work. I plugged USB mouse and keyboard and it works just fine. I went to device manager and besides Standart PS/2 keyboard and mouse icons there was orange triangle meaning that i have problem with drivers. I searched drivers online, but unsuccsessily.. After few hours of trying to fix it, my Standart PS/2 Keyboard turned into Unknown device and now im completely lost. Adding photo of device manager
Originally came with windows vista 32-bit, so recently I upgraded to windows 8.1 32 bit after about a month the track pad and keyboard BOTH came un-responsive, and in the device manager, it's coming up with a "COPROCESSOR" error.
When I try to install with ahci on it informs me it cannot install the os on my hardware... or, interestingly, it somehow manages to install fine, randomly, but when i restart after completion i get the nice new bsod.
Or when I turn ahci on in bios after installing with ide I get bsod.
I know how to turn ahci support on through the reg in windows 7 but that specific key isnt there anymore.
e/ the reason i'd like this is for dual boot. I cant boot into osx in ide / cant boot into Windows 8 in ahci
2 month ago i had this problem so i searched for a solution here (get back to the basic display adapter ) and it worked fine and no problem appeared . but now whenever i want to play a game like begone or heroes and generals my cpu usage become 100% and i get 20 fps usually 100 also i cant play i all drivers are updated : and if i want to play games i have to install the latest driver but i cant adjust brightness
I'm in program trying to remove the canon MP495 series MP Driver and it will not remove. A window says that the printer is in use by someone. The printer in question is completely turned off. I've shut the computer off and restarted it and it is still there. What now? I was trying to remove a virus and it had programs running to close them first. This is why I had to run recovery to clear it.
I just uninstall my AMD because it keeps crashing when I start a game that use it. But after that, I can't re-install AMD 7450/7650 graphic driver that was supplied by Dell for my laptop. I install it with custom installation and only check the AMD Display Driver and Catalyst Control Center. The CCC installed fine, but not with the display driver. On installation, it just kind of skipping 70% of the progress bar and I would get the "installation complete - warnings occurred during installation"
I can still see the old driver which is AMD 6600M and 6700M series in device manager. Whenever I tried to open CCC, it shows "AMD Catalyst Control Center cannot be started. There are currently no settings that can be configured using AMD CCC." Now I'm stuck using integrated Intel HD Graphic 3000.
My laptop is Dell Inspiron N4110 4GB RAM Windows 8 Pro Intel Core i5 2410 @2.3GHz x64bit