Hardware Drivers :: Unable To Print - Receiving Message Printer Not Ready?
Feb 6, 2014
I was able to print to my network-attached Brother 2070N and 3045CN laser printers until recently. Driver have been loaded, printers are discovered and added to the client, but every time I try to print I receive the message "Printer not ready". All of the Windows 7 clients can print to these 2 printers, it's just my 64bit Windows 8.1 Enterprise computer that cannot. If I can't get this resolved soon, I'll have to go back to Win7.
In continuation to my previous thread on this subject, I now have another network printer problem in the same system. I chose to open it in a separate thread because the previous one became too long.I have 3 PCs on my home network
1. Windows XP (SP3) desktop with HP6500 E709a USB printer.
2. Windows 7 (Ultimate SP1 64 bit) desktop with HP 1018 USB printer.
3. Windows 8 (64 bit) laptop.
All computers can see each other and share folders on the home network.
Computers 1 & 2 can freely print on their own printers, as well as on each other's printer. Computer 3 (Windows 8) can print on the HP6500 (which is connected to the XP computer), but cannot print on the 1018 printer connected to the Win7 computer.
I know that on the Windows 8 laptop I have to define a local port for the network printer, but when I try to do it I get "Access denied" error message. Win7 denies access from Windows 8. This is strange, because Win7 does allow access to XP. On the WIN7 computer, under printer properties/security, print permission is granted to "Everyone".
So what could be the reason for the "Access denied" error? I guess it has to do with security / users / permissions, but I cannot find a solution.
I have installed windows 8 consumer preview.I have also installed my printer drivers and they installed correctly, but problem is that my printer can't print anything(test page also).My printer is HP Laser-jet 1020.
New to windows 8. I'm connecting my wireless HP printer office jet 4500. I was in the process of downloading and installing the software and was stopped by this message. " Another installation is already in progress. Complete that installation before completing this install." Earlier I tried to install the software for an Iomega external hard drive that had crashed. It wouldn't work so I think I took the cd out without ejecting it. To the best of my knowledge there is no other installation going on. Where would I find out if a program is being installed so I can stop it?
I'm working at an office where when you hit the Print Screen button, it causes a printout in addition to the normal copy to clipboard. I just want to copy to clipboard without wasting toner and paper. It can't be a program on the computer as it's clean with just Windows 8.1
It actually happens on all the machines (whether Windows 7, 8, or 8.1). Is it a program installed on the server? Is it a setting in Windows? How do I stop this behavior?
I've once again encountered this problem with my Canon PIXMA MP620 printer/scanner: when using it wirelessly, it can't print. According to 'Devices And Printers', it's offline and therefore most programs I use in Windows 8.1 claim it can't print.
However, using Canon's program 'MP Navigator', it can scan from the printer without any problems. I can scan from the computer to the printer and the other way around. Therefore I'm suspecting that the problems lies with Windows 8.1 and not the printer. The connection is obviously there but Windows doesn't seem to think so.
I can't find a solution in the printer's manual, Windows doesn't give me anything when I try to troubleshoot the printer in question, and Canon's own 'Network IJ Tool' can find the printer but says it's doesn't work without clarifying why.
I have a home network with an XP system with a printer attached and shared. A Windows 7 laptop and my old XP laptop from work can print fine, but a new Windows 8 laptop won't print. Sharing from the XP system works as I can read files from the XP system on the new Windows 8 system. When I do an Add Printer on the Windows 8 laptop, I can see the network printer and install it and the driver so the printer shows up as installed on the Windows 8 system. The Print Test Page does not work nor printing from WordPad. I turned off the Firewall on the XP system in case that was the problem.
I dont have windows 8. She has a new computer with windows 8 built in. Also has a new printer, an Epson WF2530, multi.
She has installed the printer..but is at a total loss as to how to print something, like when in an email, etc..no PRINT option shows up? She has tried to right click and nothing comes up with printer. Somone mentioned using CONTROL P, but not sure if that worked.
I have an Epson BX635FWD printer that has and does work perfectly with Windows XP. I have recently purchased a Lenovo B540 with Windows 8 and it loaded the print drivers immediately. I thought how easy it was but have since found that it will not print a multi page document in full, but will suddenly stop halfway through a page. I made do by printing a couple of pages at a time, but then tried to print a 10 x 15 cm photo and it would only print 1/3 before stopping and spitting the paper out. The number of pages it prints correctly before giving an error message and ejecting the paper is inconsistent.
I have reloaded driver 1.32 (for Windows 8) from the Epson site twice and I have also gone back to the disc supplied with the printer and reloaded the driver from there.
I'm having trouble connecting my wifi printer (Canon pixma mg3100) and my Lacie Network Space on Windows 8, while I haven't experienced any problems connecting these same devices to my Win7 computers.
The driver for the printer is, according to Canon, compatible with windows 8.When I install the software on both my windows 7 laptops, it immediately recognize the network and after 5 minutes I can print wireless without any problems.
However when I try to install the same software on my Windows 8 computer it keeps asking to first plugin a usb cable and do a lot of manual steps, like pressing several buttons on the printer, it's ridiculous! After a while the software succeeds in finding my Wifi but it keeps on saying 'unable to connect'
My Windows 8 laptop is a brand new Dell Inspiron and I didn't change any network settings.
Both Firefox 30.0 and 27.0 installed, when I do a Reply in hotmail I cannot type into the body of the msg. Only the subject line. However FF 27.0 Portable works normally. So does Opera x64 and chromium.
I move a lot of files around on my computer between different files and between hard drives for organization purposes (running Win8) and about 1/3 of them lately will display this error when I attempt to drag and drop from one folder to another "The action can't be completed because the folder or a file in it is open in another program" but these files are NOT opened or being used by another program...it's completely random and if I try again after about 15 minutes or so then I will magically be able to drag/drop the files...
I just tried to print a web page that I had up. Control-P didn't work and when I went to the charms, it told me that I could only print from apps? I'm confused.
When I try to print pdf files the print dialog box goes away but the print job just disappears. Nothing comes out on the printer. No errors or anything. I have tried different printers on my network. Not sure what's going on.
I have my HP 8500 Pro set up to print, but I cannot scan. Any word on how to do this? When I went to scan/fax, it says that I have no scanner hooked up.
Epson WF 2540 keeps going offline every time my Dell XPS 13 running Windows 8 goes to sleep. Am looking to see what I need to change in the software to keep this from happening. It will go back online after sometime or I have to go and turn it off to get it back online.
i has install my printer (HP Laserjet P1102) and using that with no problem. But, Suddenly i want to print my file but there are message say the printer isn't installed on my windows. Now, i want to install my printer but there are message "There are no more endpoint available from the endpoint mapper".
I am trying to print a gift card from the internet that someone sent me from Facebook. It is telling me I cannot print until I use One Note one time. I don't want One Note.... How can I get this off my computer so I can print. This is maddening... I buy a printer and computer and can't print until I use their product?
OK so I right clicked and made my printer the default and it still won't print. I ended up thinking I was deleting the print queue and my whole printer disappeared. Do I have to now reinstall my printer??????
I'm unable to print on my Xerox WorkCentre PE220. Win 8 installed the driver properly and did not show any errors or red flags during and after the installation. When I print a window shows up saying error cannot print.
I am trying out the x64 version of windows 8.1 update on a fresh install. The printer I have is a HP710c and the drivers are provided in windows both 32 bit and 64 bit. Printer works fine in the 32 bit version but nothing happens on the 64 bit OS. Documents go to the spooler then just disappear as if being printed but arent.
Also the spooler seems to fall over when I send a document to the printer or try to print a test page. Tried the trouble shooter and changed the settings on the print spooler service to always restart after error.
I installed an HP Office Jet J4580 in Windows 8.1. It works fine.
However when I go to 'Devices and Printers' and right click on that printer (it is the only printer I installed), it shows a drop down box with three Office Jet J4500 Series. I can select any one of them and they all work, for instance when I print a test page.
Screenshot of the dropdown list: View image: Printer properties
It bugs me that there are 3 listings of that one printer.
I have been having an issue in Photoshop selecting a printer. I have already gone to Printers and Devices and set my laser printer as the default printer. However, every once in a while, the default goes away in favor of the One Note 2010 printer. I would like to delete the Fax, One Note 2010, and Microsoft XPS Document Writer printers hoping that Photoshop will realize which is my default printer.
I have Acrobat Pro to make Pdf's. I am running Windows 8 Home.
When I turn my HP LaserJet CP1215 on, on a fresh install of Win 8 Preview the Printer Driver loading icon appears on the taskbar and the green shade goes across as if it's installing correctly. Looking in Control Panel/Printers and devices shows the printer installed and the properties shows the device is working correctly.
However when I try to print in any application no printer is shown, and trying to add a printer runs through the search and finds nothing.
I have had Win 8 Pro up and running for about a month and I am having a continuing printing problem. I have 2 printers that I am trying to print to. An HP 4250 and a Ricoh C821DN. Both are on the network and I access them through the local IP address. They both installed fine, but half the time I cannot print to them. When I print, the print command finishes, but nothing prints and nothing is in the que.
I try printing a test page and I get an error box saying that "Test Page Failed to Print". Running through the troubleshooter only makes the printer the default printer and that has no effect. I can see the printer through my browser by typing in the IP address and everything is fine. I also have my laptop running windows 7 right next to me on the network and it prints to both printers just fine.
Sometimes Win 8 will print and sometimes it wont, often for hours at a time.
How to set the IE11 in Win 8.1 to only print a web page in Black and White. In Win 7 I had found it but with great difficulty and I believe it was in Internet tools if you drill down far enough. In Win 8.1 I cannot find it so that when printing out a web page that has red and blue it is almost impossible to read on my Dell 1700 monochrome laser. I tried in the Devices and Printers, Dell, both Printer preferences and printer properties but cannot find anywhere to set. I am fairly certain it is a setting that has to be made in Internet Explorer but they seem to have hidden it (I think I was using IE9 or IE10 in Win 7). In Excel you can set that parameter for each page in page setup.
I have recently got a new printer and it supports airprint. I was wondering whether I could use my windows 8 laptop to use airprint to print my documents instead of installing the driver which keeps on failing as it cant maintain wireless contact.
I'm running Windows 8.1 and I'm trying to print from a network printer. One job is clogging the rest of the jobs and is stuck on "deleting" but won't ever get deleted. Others on the network are still able to print from the printer. So far I've tried:
-Clicking on "cancel" in the job queue -Restarting the computer -Restarting the printerRemoving/re-adding the printer from Printers and Devices -Uninstalling and reinstalling the drivers -Stopping/Restarting the Spool service in Task manager -Looking for the files found in /System32/spool/PRINTERS
The weird thing, actually, is that there was no folder "PRINTERS" when I go to /System32/spool. I know that deleting the files in there often fixes the problem, but I can't even find a PRINTERS folder.
I have several printers at work all hooked up to a samba share so that the whole office can use them. We have Konica Minolta, HP and Lexmarks predominantly but some other brands as well like Kyocera.
I have a fresh Win 8.1 Pro install and i have installed the printer drivers via the Windows update mechanism for all the printers. Some i've added via the samba share some via direct ip connection.
For whatever reason i cannot add/delete or config any of the printer ports as seen in the attached screen cap. I've even tried the windows Administrator account to no avail. UAC is off and i have admin rights to the pc.
I have sought support on freenode's #windows channel and googled the hell out of this topic, to avail.
