When I try to print pdf files the print dialog box goes away but the print job just disappears. Nothing comes out on the printer. No errors or anything. I have tried different printers on my network. Not sure what's going on.
View 6 RepliesNot sure if this is entirely a Win 8 problem but ever since I installed it I have 3 network printers 2 x Kyocera and 1 x Epson. The Kyocera now do not allow me to print from MS office. All drivers are saying up to date and no errors. I have uninstalled and reinstalled both printers.
When I print from Word or Excel I get an error message like this
PCL XL error
Subsystem: TEXT
Error: IllegalGlobalTrueTypeSegment
Operator: ReadFontHeader
Position: 24
If I print a table or anything with a border it will just print a blank table but no text
I can print web pages and PDFs perfectly fine.
I have installed windows 8 consumer preview.I have also installed my printer drivers and they installed correctly, but problem is that my printer can't print anything(test page also).My printer is HP Laser-jet 1020.
View 9 Replies View RelatedI am trying out the x64 version of windows 8.1 update on a fresh install. The printer I have is a HP710c and the drivers are provided in windows both 32 bit and 64 bit. Printer works fine in the 32 bit version but nothing happens on the 64 bit OS. Documents go to the spooler then just disappear as if being printed but arent.
Also the spooler seems to fall over when I send a document to the printer or try to print a test page. Tried the trouble shooter and changed the settings on the print spooler service to always restart after error.
I have had Win 8 Pro up and running for about a month and I am having a continuing printing problem. I have 2 printers that I am trying to print to. An HP 4250 and a Ricoh C821DN. Both are on the network and I access them through the local IP address. They both installed fine, but half the time I cannot print to them. When I print, the print command finishes, but nothing prints and nothing is in the que.
I try printing a test page and I get an error box saying that "Test Page Failed to Print". Running through the troubleshooter only makes the printer the default printer and that has no effect. I can see the printer through my browser by typing in the IP address and everything is fine. I also have my laptop running windows 7 right next to me on the network and it prints to both printers just fine.
Sometimes Win 8 will print and sometimes it wont, often for hours at a time.
I have recently got a new printer and it supports airprint. I was wondering whether I could use my windows 8 laptop to use airprint to print my documents instead of installing the driver which keeps on failing as it cant maintain wireless contact.
View 1 Replies View RelatedI just tried to print a web page that I had up. Control-P didn't work and when I went to the charms, it told me that I could only print from apps? I'm confused.
View 1 Replies View RelatedI have my HP 8500 Pro set up to print, but I cannot scan. Any word on how to do this? When I went to scan/fax, it says that I have no scanner hooked up.
View 9 Replies View RelatedI am trying to print a gift card from the internet that someone sent me from Facebook. It is telling me I cannot print until I use One Note one time. I don't want One Note.... How can I get this off my computer so I can print. This is maddening... I buy a printer and computer and can't print until I use their product?
OK so I right clicked and made my printer the default and it still won't print. I ended up thinking I was deleting the print queue and my whole printer disappeared. Do I have to now reinstall my printer??????
I'm unable to print on my Xerox WorkCentre PE220. Win 8 installed the driver properly and did not show any errors or red flags during and after the installation. When I print a window shows up saying error cannot print.
View 9 Replies View RelatedHow to set the IE11 in Win 8.1 to only print a web page in Black and White. In Win 7 I had found it but with great difficulty and I believe it was in Internet tools if you drill down far enough. In Win 8.1 I cannot find it so that when printing out a web page that has red and blue it is almost impossible to read on my Dell 1700 monochrome laser. I tried in the Devices and Printers, Dell, both Printer preferences and printer properties but cannot find anywhere to set. I am fairly certain it is a setting that has to be made in Internet Explorer but they seem to have hidden it (I think I was using IE9 or IE10 in Win 7). In Excel you can set that parameter for each page in page setup.
View 2 Replies View RelatedI'm running Windows 8.1 and I'm trying to print from a network printer. One job is clogging the rest of the jobs and is stuck on "deleting" but won't ever get deleted. Others on the network are still able to print from the printer. So far I've tried:
-Clicking on "cancel" in the job queue
-Restarting the computer
-Restarting the printerRemoving/re-adding the printer from Printers and Devices
-Uninstalling and reinstalling the drivers
-Stopping/Restarting the Spool service in Task manager
-Looking for the files found in /System32/spool/PRINTERS
The weird thing, actually, is that there was no folder "PRINTERS" when I go to /System32/spool. I know that deleting the files in there often fixes the problem, but I can't even find a PRINTERS folder.
I was able to print to my network-attached Brother 2070N and 3045CN laser printers until recently. Driver have been loaded, printers are discovered and added to the client, but every time I try to print I receive the message "Printer not ready". All of the Windows 7 clients can print to these 2 printers, it's just my 64bit Windows 8.1 Enterprise computer that cannot. If I can't get this resolved soon, I'll have to go back to Win7.
View 1 Replies View Relatedon Acer Aspire Windows 8 - All the drivers I have to instal, do not include an installation program and I have to instal the drivers manually. I don't know if I am doing it right or if there is an easier way of doing it but I have to right click the downloaded Zip file for Bluetooth, extract all files, search for the Bluetooth folder in Device Manager to instal the driver. I have got six drivers (not all Bluetooth) to instal and just want it get it right. before I upgrade to Windows 8.1 again.
View 9 Replies View RelatedA newbie to Windows 8.1 (moving from XP!)...The new PC seemed to detect and install the drivers needed for our Canon MP610 no problem and I have successfully printed from Word. But when I open a saved pdf, it doesn't print: it just endlessly says 'spooling'.
View 3 Replies View RelatedI dont have windows 8. She has a new computer with windows 8 built in. Also has a new printer, an Epson WF2530, multi.
She has installed the printer..but is at a total loss as to how to print something, like when in an email, etc..no PRINT option shows up? She has tried to right click and nothing comes up with printer. Somone mentioned using CONTROL P, but not sure if that worked.
After a restart of the pc, the print spooler doesn't start. I have to start the print spooler manually (services.msc) in order to be able to print.
View 2 Replies View RelatedSo, have a client who runs Windows 8. Can't print to any of the printers in their office. They have shared / wireless and a couple of USB connected ones. Each one installed /configured indivdually and the test print will queue up but nothing will happen, it just sits there and does nothing
The ONLY thing i could managed to get to print was through bullzip (pdf creator )
check printer spooler
checked permissions on spooler/printers folder
re-installed printers different ways
they all seem to install just fine, but won't print
Computer has been rebooted several times to no avail. I tried different drivers for each.... ??
This is regular workgroup/ not domain.
Ever since I bought this *link* HDD I have never had a faster file transfer than about 80mb/s, and that happens rarely. I'm using the new SATA cables and everthing. Is this normal?
I'm considering on getting this *link* SSHD, would it be much faster than the HDD?
Printing was working correctly for me until today.
This morning I installed Windows Update KB2753842. After that, I could not longer print. This might be coincidental, but it is the only thing that I can think of that has changed since I was able to print.
Now, when I try to print I get the 'Save Print Output As' wizard, prompting me to save to a file. This happens even though the previous Print wizard screen has the 'Print to file' choice unticked.
When I run a program in compatibility mode, what changes are made in OS?
To make my question more specific.
When I print from windows 8, the spl file has very different structure than when I print from windows 7.
But when I run the application in compatibility mode windows 7, the spl file that is created is exactly the same with windows 7 spl.
So I try to find out what compatibility mode changes, in order to produce in windows 8 a .spl file that is exactly the same with windows 7 spl, without running my app in compatibility mode.
I'm really enjoying Windows 8. However, I can't figure out how to print a download or PDF when it's downloaded. On XP, there's a menu that shows up around the download with choices. The only choices I can find on Windows 8 is how you want to view the download or closing it. Where do you get the print option?
View 2 Replies View RelatedI bought a Micro SD Card 32GB from eBay. I am trying to copy files to it so I can transfer them from my PC to my Laptop, however whenever it finishes copying files and I plug it into my Laptop, it needs formatting. I have tried copying files to it and them plugging it back into my PC but it says it needs formatting again. It is annoying me because I am trying to copy a disk image which is 16gb and it takes hours to copy to the Micro SD Card but when i unplug it from my PC it suddenly needs formatting. I am using NTFS Format, i cant copy my files on Fat32. It also doesn't let me format the card, its saying 'Windows was unable to complete the format'. This Micro SD Card is basically unusable.
View 3 Replies View RelatedI am running windows8 pro 32 bit, with a Xerox workcentre 3119 laser printer attached to it, by usb. It prints fine. But... I have a homegroup with a windows7 home premium 64 bit machine on it.
I did a clean reinstall on the windows7 pc, and now I can't print to the Xerox from the windows7 pc.
I tried removing and reinstalling the printer on the windows7 pc,
I tried reinstalling the driver for the printer on my windows8 pc,
I tried removing all the computers from the homegroup and recreating the homegroup,
I tried removing the printer from the windows7 pc and changing the name of "workgroup" and then reinstalling the printer on the windows7 pc. But I still can print from the windows7 pc.
I'm trying to print images/pictures using windows photo viewer and I get this error "Your pictures can't be printed because this error occurred".... It doesn't tell me which error.. simply just says that in the dialog box. THe dialog box comes out like 4 times with the same message and I have to click OK.
I've already tried googling it and the only fix I can find is replacing photowiz and I already did but it has fixed. I've also installed Photo Gallery and it stil lgives me the same error when I try to print and picture. I've also reinstalled all my printer drivers...
Windows 8.1 Updates installed . HP Computer
I need deleting a file in my print que. It says it's deleting the file but nothing happens and other files sent to the printer will not print. I haven't found much that is specific to Windows 8 64 bit with an internet search.
View 1 Replies View RelatedI'm not sure how far reaching this is but I just noticed that when I select a folder and type a file name in the search bar on the right of the address bar, files are found on my backup drive, which is attached by USB to the PC, this drive is attached because it contains other partitions for file storage.
The folder in this case was on the desktop and it shows that it is on C: Drive, but files were found on the H: Drive which is where I run my backup to.
When I un-attach the H drive the files found do not respond to left or right click.
Whenever I start moving files between partitions on my laptop (Asus K61-IC) it will start moving the file but after it has transferred part of the file the whole computer will freeze and the only thing I can do, is force a hard reset by holding down the power button.
I have tried doing an upgrade of the OS thinking it was a problem with Windows 7 but it is doing it with 8.1 also. I am about to see if it does it when transferring files to my external hard drive and if it doesn't I'm going to back everything and if anything, format the whole hard drive to one partition and then maybe it won't do it anymore.
I installed Windows 8 Pro on a Dell Studio 1537 laptop that used to run Vista. Win 8 Pro was installed in Dec 2012 and has all Microsoft Windows 8 updates installed.
When I try to burn files on a blank DVD disc using Windows 8's Explorer, I get a message that says:
"Insert a disc Please insert a writable disc into drive M:"
The blank disc is then ejected. Even if I reinsert a different blank DVD disc and try again, the same thing happens.
However, if I open ImgBurn and use the "same" blank DVD disc, ImgBurn recognizes the blank DVD disc and is ready to burn.
It should be noted that I never tried to burn DVDs using Vista's Explorer so I don't know if that ever worked. I just used ImgBurn while I was running Vista. I know I can just use ImgBurn with Windows 8 but I would like to know why Win 8's Explorer won't recognize blank DVD discs. Is this a known problem that has a fix?
I've once again encountered this problem with my Canon PIXMA MP620 printer/scanner: when using it wirelessly, it can't print. According to 'Devices And Printers', it's offline and therefore most programs I use in Windows 8.1 claim it can't print.
However, using Canon's program 'MP Navigator', it can scan from the printer without any problems. I can scan from the computer to the printer and the other way around. Therefore I'm suspecting that the problems lies with Windows 8.1 and not the printer. The connection is obviously there but Windows doesn't seem to think so.
I can't find a solution in the printer's manual, Windows doesn't give me anything when I try to troubleshoot the printer in question, and Canon's own 'Network IJ Tool' can find the printer but says it's doesn't work without clarifying why.
There is 3 hdd's installed to my rig:
1 is 55gb kingston ssd where i run my windows
2 is 1tb hitachi where i keep my games and other junk
3 is seagates 250gb laptop hdd.
The main problem was that sometimes when opening or just clicking some folders freezes the file explorer and it crashes after it, so i tought to format the second hdd to make it work better now it seems work ok except for moving files from hdd to another.
When copying the copy speed just at random point drops to 0% and leaves the hdd 3 to hang 100% and the hdd 2 is dropping to 0%.
What i have tried:
I ran hdd regenerator and 18 bad sectors were fixed Also tried to change sata ports That's not much but can't figure anythin else for now and i am starting to suspect that my hdd is gone bad :/ also when downloading ~100mb file from internet it makes same thing but i don't know is it same problem...