Network / Sharing :: Unable To Get VPN Connection Working
Jun 17, 2013
I have a VPN connection from home to work and now that I have moved to Windows 8 I can't get it to work. I have tried pretty much everything I can think of and find on forums and YouTube videos, eg turning off Norton (virus and firewall), opening ports on my router and configuring all manner of settings for the VPN connection.
I have my old Win7 laptop and I can still instantly connect to the VPN using that. So, I have copied all of the settings from there, but still no result.
I constantly get the 'Error 800' message (Unable to establish the VPN connection).
One video showed the steps of setting it up and there were no mysteries to it. It was pretty much all default settings.
This is a fairly new install of Windows 8 pro (within the last month), and while trying to set up a static ip up today I found that I was unable to access the network properties or disable the connection in the Network Connections. I am pretty stumped as I am the only user of this computer and from what I can tell have the correct permissions to do so. When trying to check the properties it tells me "an unexpected error has occurred" with no further information.
Recently I have been installed Windows Eight Pro 64-bit in two of my desktop computers. One pc having motherboard Intel DG41 and the other one is Asus Sabertooth P55i. I have two external Realtek NIC card installed in both of the pcs. When I was using Windows Seven 64-bit, I installed PPPOE as follows:
=> Conrtol Pannel => Network and Sharing Center => Setup a new connection or network => Connect to BROADBAND (PPPOE) [something like that]
But when I am trying to install pppoe on windows eight like the same process, it shows "Unable to install PPPOE" kinds of message and reboot. I thought the NIC card driver was not installed properly so I re-install the NIC card driver and again tried but it crashes and then reboot.
The funny part is, when I plugged the Ethernet cable into my built-in NIC card (the one that is embeded on Motherboard), it doesnt reboot and installed successfully. But I need to use the external NIC card and with that I am unable to connect to PPPOE.
I face the same problem in both of my pc and now I have to use the built-in NIC card. Is there any solution to use the external NIC??
I have been having issues with sharing my internet connection via an ethernet cable. I read online that there is the ability to 'share' your internet connection. I have learned how to do this, but it doesnt work for me. I tried connecting my laptop. I went through everything and I was able to get the connection (it showed the LAN connectivity icon) however, there was the little yellow triangle next to it. I waited but it won't connect. What I am trying to do with this is be able to play multiplayer on computer games with other computers on my LAN. I also tried to connect my XBox 360 with this, but it doesnt have an internet connection.
Things to keep in mind The only way I could get a good internet service was through my cell phone service provider, so I get my internet connection through my phone via USB tethering
All of the computers I am trying this on have Windows 8 Pro, except for one
I am facing a strange problem with my internet connection on Windows 8.
I have a netgear WNR612 wifi router and two laptops connected to it running Windows 7 on first and Windows 8 on second.
The connection in Windows 8 laptop shows sufficient signal strength but when I try to access internet, it does only shows connecting. I have changed browsers, wifi router, adsl router, released and reconnected IP address, forgot and re-added wifi network, reset wifi router to factory almost everything.
The strange part is that as soon as the other Windows 7 laptop is disconnected from the network, Windows 8 internet start working fine. I have tested this many times and there is no doubt in this behavior.
I dont know whether the problem is in any update installed on Windows 8 the older Dell Wireless 1703 wifi card or some virus in the other Windows 7 laptop.
My ipconfig output:
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network) Physical Address. . . . . . . . . : F4-B7-E2-59-1E-42
[Code] .....
Note that I have assigned preferred IP addresses to both laptops based on MAC.
I installed hyper v on my machine which is running Windows 8.1. Then I created a Virtual Switch on my wireless network. After that, it was not working in the VM but the wireless connection in the host was working fine. After that, when I connected to a different wireless network, it did not work. I deleted the bridge, uninstalled hyper v, but it is still not working. I installed hyper v again, but it is still not working. The wireless connection connects to the wireless network after putting the password, but does not give network connectivity to the internet.
I need to get the wireless connection to work again.
After the new windows 8.1 update (which inclided the home screen power off button) a net problem came out. In my wifi indication, it sais "limited", but when i enter the web, i can search in the internet without probs. When i go to net. and sharing center, i cant see any network. On my other laptop (win7) it shows the connection normally.
My wireless connection is fine, but my LAN isn't. This is a university subscription so there is a proxy server. I asked the school if they have activated my subscription and they said yes. I tried changing cables but it still would not connect. I know the proxy server settings are correct because there is also a wireless connection in school which uses the same settings.
I ran network diagnostics and it said that the connection between the cable and the internet is not working. When I open Chrome, it says that the DNS lookup failed. I tried resetting my TCP/IP, setting my preferred DNS address to 208.67.220.220 and 208.67.222.222 but it still would not work.
I check my ethernet driver settings in Device Manager and it is fine and updated to the latest version.
I have strange network problem these days. I have a desktop PC and installed Windows 8.1. And I have a LAN. The gateway IP address is 192.168.2.1.
The network works fine when I start the PC. I can access Internet with IE, I can access the config pages of my gateway and I can SSH my local File server. It's a synology ds212j. I assigned static IP address 192.168.2.18 to it and name it as "home_ds". I add dns entry in file "hosts".
But there will be very strange problems if the PC keeps running about 2/3 days. It seems I can't connect to other computers from my PC. No IE, no SSH, no ftp.... But ping still work. These is no network device listed in my network folder. But I still can access the mapped network drives.
For example, I can ping www.google.com, I can ping 192.168.2.1 and 192.168.2.18 and "home_ds". K:> ping 192.168.2.1Pinging 192.168.2.1 with 32 bytes of data: Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.2.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 13ms, Maximum = 61ms, Average = 32ms
But when I try to telnet and ssh, all failed.
I tried: telnet www.google.com 80 telnet 192.168.2.1 80 telnet 192.168.2.18 22 all failed.
I tied putty, msn, outlook,... all failed. But my wife's PC works normally at the same time.
In the network folder, there should be a list of all my network devices, including my wife's PC and my File server. But it's empty if this problem happens. However I can add them mannually and I can access the network drives.
And I can connect to my PC from my wife's PC with remote desktop.
If I logout and login again, the network will recover except 1 new problem. That is I can't access the network drives of my File Server with computer name "home_ds", but IP address works. And I can ping it with computer name.
K:>ping home_ds Pinging home_ds [192.168.2.18] with 32 bytes of data: Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.2.18: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 11ms, Maximum = 30ms, Average = 19ms
A restart will solve both the above 2 problems. But I don't want to restart my PC so frequently.
I tried to solve this problem by update windows and drivers but failed.
when i connect my hp probook 4520s to my sony vpcyb4ajg with Ethernet cable on my Hp wireless disconnects and can not be connected until i disconnect lan cable. but on my sony i have both wired and wireless connections simultaneously
hp:Windows 8 x64 realteck Ethernet and atheros wireless
I have been trying to upgrade all of my computers to Win 8.1. 2 updated fine, but the last machine will not upgrade.
Every time I try to upgrade my last computer through the Store I get the following error: "We weren't able to connect to the Store. This might have happened because of a server problem or the network connection might have timed out. Please wait a few minutes and Try Again."
I have waited, and rebooted, with no success. I tried to log on using my Windows Live ID and get a similar message.
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I have 2 PC's. Both are now running Windows 8. The main PC was running Windows 7 and I there mapped a network drive (z to the Windows 8 PC. It worked very nice. The second PC was also shown in "networks" in "my Computer" right after boot of Main PC. So network for sharing is set up properly on second PC.
After installing Windows 8 on main PC, it is still working, but the time spend waiting for the network drive is waaaaay longer now. The name of second PC "Photo-PC", is shown right after boot, but when I first click on the name, and get this error:
Networkpath not found. Errorcode 0x80070035
If I then wait about 20-30 seconds and then click again on "Photo-PC" then I have access to all shared drives, included my mapped network drive Z:
How can I eliminate this 20-30 seconds delay after boot?
I have given up setting up a homegroup, never had it to work, but "oldfashioned" network drives used to work
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so: - WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar. - Under the wired network properties IP Version 4, I manually set addresses to be IP 192.168.10.1 Subnet 255.255.255.0 Gateway 0.0.0.0
Laptop B has only a wired network, set to IP 192.168.10.2 Subnet 255.255.255.0 Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
I just bought my daughter a Lenovo running Windows 8 and when I try to connect to my Wi-Fi I am getting Limited connection only and can't figure it out.
I have up until a few days ago been able to modify and save my network properties ok. I connected a new DisplayLink USB docking station that lead to an update of some sort. I believed this to be to do with associated drivers. I let this go ahead and it may well have nothing to do with the problems I have been having.
First of all I couldn't even see the IP parameters and kept getting an error as follows:
"In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card"
The wired and wireless was working in environments where I could use DHCP so I was confident the hardware was ok. Uninstalling the drivers and then updating them has got me passed this problem so I can see and edit the IP parameters. However now they are never saved. I edit them, close the window, re-edit them and they are back to automatic settings! I need to use static settings in the office.
So far as I can see there are 2 possibilities:
1. I don't have permissions to save these settings, wherever they are stored. But I have administrator permissions. Where are the settings stored? I have saved them before. How can I get access to be able to save them again? 2. Something else is overwriting the settings. How do I find out what and stop it?
We just bought a new machine having windows 8 preinstalled and we use it as a server running small web apps but sometimes it just went dead when nobody touch it for long and we suspect it's the issue related to sleeping mode if it is how do we fix it?
I am frequently getting page not found errors, and am having to reload, pages take a long time to load and it's pretty much 50-50 wether it will or not load at all.
I've tried rebooting my router. I have a Vergin Media 'Super Hub' which is only two months old.
I am a home user trying to use a PPTP VPN connection from Portugal to the UK and this is a new laptop. Frustratingly the connection worked initially but I must have changed something while setting up all my stuff on here since then and I now get error 807 when trying to connect.
I can ping the VPN server but when I try to telnet to it via port 1723 it fails even though I have disconnected the Windows firewall and disabled AVG
I have a laptop I bought last fall with Windows 8. Everything has worked fine until just now. I had internet a moment ago and now it is telling me that there is no connection available. I have checked to see if the wifi was turned off. ALl my other devices are working fin. I went to check that the wifi was turned on in the laptop and it shows no wifi at all....
I'm new to Win 8.1 but I'm fairly tech-savvy. I've got a new Toshiba Satellite S55 B5289 with Win 8.1, connecting to the Internet via Time-Warner over wifi. I'd go into the details of the wifi and router, but given that I've got a month-old HP with Win 7, and a 2-year old Samsung Chromebook sitting here with the Toshiba, all three running Chrome as opposed to IE, and the other two getting significantly better speed, I don't think those details are really critical.
This problem has been going on since I brought the new laptop home, but I've carefully uninstalled all the bloatware that came pre-installed, and made the standard Chrome tweaks [unchecking the hardware accelleration] nothing has worked. Yesterday I took it to a friend who has a computer repair business and he tuned up a lot of the things inside Win 8.1 that I had no clue about - as I understood it, making 8.1 run Chrome without going *through* IE. I didn't pay as much attention to that as I should have, but essentially everything seemed to be working very well. His Internet connection, however, is lightning fast, and connecting to that wifi, things were downloading and running spectacularly well. Just what I'd expected - or at least hoped for - when I bought it.
Using it at home today, the problems have resurfaced. Loading emails, for instance, is not quite right. Images in the emails frequently don't load properly - it will stutter and often stops in the middle of an email. If I click on a link, there can be a significant delay before the page loads. Videos buffer every few seconds and even when I let the entire video load, it still plays spastically.
All of this is in Chrome, using tabs - which I always do. Yes, of course I could clear the cache, start fresh, use no tabs, let one thing load at a time, but that's not what I have ever done, so this is real world testing. The most telling detail, though is the download speeds I'm getting.
Running Speedtest on all three machines, the ping is basically the same, but on the Toshiba, it frequently can't even finish the download test. It just stalls to a halt. The Chromebook gets a download speed of 5.75 and the HP gets 21.31. We pay Time-Warner for 20, so I'd really like to see something like that on the Toshiba.
My connection just went 'limited connection' but I can browse and download on the web with ease. Also, my metro apps like mail, and news, facebook does not update, and also it's live tiles. Windows store app says it can't connect to the internet.
I'm using an Nvidia nForce ethernet built in an Asrock n68c-s ucc motherboard.I tried to find updates for this nvidia nforce but managed to get only for windows 7. so installed it, and nothing happens.
Now that I have upgraded to win 8.1 I can no longer connect to my Windows 8.1 machine at home through WHS. What settings I need to change get this working again?
I recently upgraded to windows 8.1 pro on my laptop (HP Probook 6560b). This is an old business laptop that used to belong to my mother and originally had windows 7. After upgrading and installing all required drivers there is still no option to connect to the internet via Wi-Fi. (currently connecting via ethernet cable)
This is what my network screen looked like:
I say "looked" because that has since changed after downloading the broadcom driver from the HP website (this link> Broadcom Wireless LAN Driver for Microsoft Windows 8 | HP Support), now my network screen looks like this:
I have a VPN connection that was created, but somehow has no name to it, and I cannot remove it. I am running WIN 8.1 64BIT on a Dell E7240.
I have tried to remove it from the Windows 8 interface, I have also tried removing it from Network and Sharing Center. I am lost at this point as to how to remove this connection. Screen shot below for more information:
