Network / Sharing :: Windows 8.1 - Router Web Config Page
Oct 19, 2013
Since upgrading to 8.1 , if I try and access my routers web page to change some config settings , the browser (and I've tried 4 different ones) connects to the web interface REALLY REALLY slowly... we're talking 5-10 minutes just to show part of the menu UI and even then not all the graphics show.
I can connect to the same interface using my tablet and it's instant...
Under Windows 8.0 it worked just fine also...
General web browsing is fine as is internet access for gaming etc...
I am using windows 8 laptop. When i tried to log in to Beetel Router admin page(192.168.1.1), i was not able to log in. I used "admin" as username and " password" as the password. But the page is not getting loaded. Its asking for the username and password again. My friend is able to log in to the same page with the same credentials in his windows 7 laptop. So i guess its the problem of OS.
So I've been using this router, Belkin N+ wireless router F5D8235-4 v2, for a while now and It hasn't had problems most of the time and I've been using it fine with my DSL modem. My mother connects with her Nook tablet, my father with his laptop, and sometimes my phone and no problems. Until the other day when I randomly went to go on my computer I had no internet connection so I
1) Reset modem and router like I always do, still nothing.
2) Tried windows trouble shooting and gave me this message """"Ethernet" does not have a valid IP config".
3) I unplugged my Ethernet cable from my modem to the router and directly connected it from modem to computer and everything works fine and doesn't randomly lag out like before.
while ago my internet on my laptop got messed, I reset the router and the Internet went down for days, but when it came back it wasn't working for my laptop, but everything else. Trouble shooting has told me it's a DNS server not responding, and now it's telling me the wifi doesn't have a valid ip config. I've tried many things, like with the internet protocals, the command prompt fix which also hasn't worked, and I'm stuck on what to do.
When I click on my my internet protocols v4/v6 it gives me the option to install maybe that's something or not.
I am trying to troubleshoot a network connectivity issue for my Mom & Dad's laptop. It is an HP 64-bit running Windows 8.1. Up until this morning, it was able to connect to wi-fi. My mother was on the internet with no problems. They have my-fi with AT&T and my dad's laptop and tablet connect fine.
We have tried: -Restarting the HP taking the battery out uninstalling the wi-fi network adapter -Restarting and letting it reinstall for getting the network -Manually adding the network back in and nothing worked.
So, I took the laptop back to my house and connected it directly into my router via Ethernet cable, but to my surprise, it showed connected, but no internet connection. I ran the troubleshooter and it said that "Ethernet" doesn't have a valid IP config. I restarted the laptop with the ethernet plugged in, but it came back up with limited connectivity and the same error message. I tried connecting to my wifi at my house and again, it sees the various networks, but will not connect. I get a message when I hit the connect button that it is Checking network requirements, but then after about 30-45 seconds it says Can't connect to this network. All of the other laptops/pc's/tablets and phones are connecting just fine.
When I click network while i am in windows explorer, the network infrastructure is not there, only the Computer is visible there and i want to fix something by changing the properties of my modem/router on the network infrastructure.
without the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
Since I changed the security parameters to my Linksys Wireless Router so my grandson could log in while visiting me on his laptop. I can't seem to be able to access my other computer on my home network. Enclosed is an "ipconfig/all" screenshot. I need to access my printer on my other printer which I was able to do prior to playing around with my router. All the diagnostics say more or less the same thing. They can "see" the computer but it isn't responding...
Wifi worked, walked away for 10 minutes, then found that it didn't. I would normally just reset the router, but I live in an apartment building and the router is in my landlords office.
When I did ipconfig /all, my ip started with 169, which I know isn't normal. But when I try to do a /release and /renew, I get the error "No operation can be performed on local area connection *14 while it has it's media disconnected." I am unable to attempt a wired connection, as the router is not accessible to me.
.I'm not sure if this is a router issue, or an issue with my laptop (less than a year old.) I am a grad student and I currently have to do most of my work via my iphone, which is getting very inconvenient.
I play games on my computer and i have Windows 8 which came with the computer and it works fine. But when I play games online it will work for a while then it will drop me out of the game. And when i look at the bottom of taskbar it has the little disconnected symbol.
I am using the computer built in "802.11n Wireless LAN Card". After a few seconds it will reconnect.
I am sharing my internet connection with my roommates, but lately they have been using P2P to download stuff which uses almost all the internet speed available. I have set up QoS to limit their bandwidth in the main Asus wifi router which directly connects to the modem, it works great for a few days, but then it doesn't work anymore, I still get slow internet speed now. Since my flat has 2 wifi routers, one is the main and another one is set up with a different name but still connects to the main router via the ethernet cable a few metres away so that the wireless range is increased. Just for your information, the two routers are transmitting on different channel, if you think that might be the cause and they have different SSID.
Could it be possible that the QoS only works in the main wifi router and doesn't affect the other wifi router which my roommates also have access to it?
I have changed the default router password so I am sure that they have no access to the router's settings.
Yesterday I purchased a new Dell Laptop. In the setup and configuration the unit found my wireless network. I have two other PC's (not windows 8) two Kindles, two Cell phones and an IPAD on this router and all the Dell would say it it can't connect to this network. It won't ask for the passkey, it provides no additional information and I can't get online in my own network with this system. I can however log on to a neighbors unsecured network effortlessly.
I am using an old airlink 101 wireless router that has been trouble free for several years. I tried to log onto airlink for a support inquiry but they no longer provide support for this model.
I have a netgeat WNDR4500, I also have readyshare cloud installed on my home pc (HP pavilion elite x64 Win 8 pro) I also have it on my work pc (windows 7 pro Lenovo). I cannot seem to access my shared folder when logging in to ready share, it shows my device, but never pulls the shared folder. Is there something in the port forwarding setting that I may need to change?
I just got a new Windows 8 laptop, a Lenovo Y510p, and I've been having several wireless issues with it. Pretty early on my computer froze up so I had to force it to shut down. After resolving the issue, I was unable to load any websites, however a flush of the dns cache fixed the problem right up. Fast forward a few hours, and suddenly I can't connect to the router in my dorm room-I just suddenly lost my connection and now I can't reconnect.
My roommate has a router set up for our room connected to an internet jack in the wall. It is configured as WPA2-PSK. I usually connect to this when in the room, but now I can't-windows just says "can't connect to this network". There is wifi throughout the dorm already, which I can connect to just fine, however the signal isn't as strong.
This is a link to my ipconfig : ipconfig - Pastebin.com
I have to reconnect my Win 8.1 computer each time it's started,my Win 7 computers do not have this problem. Also my Canon G16 WiFi camera can connect to all my Win 7 systems but not to my Windows 8.1 the camera is not found. Windows 8.1 has been a real bummer. Just glad I still have other computers running Win7.
I'm trying to set up my router to the new internet connection and get the wifi going but for the life of me I cant get it set up. The internet connection itself is fine, from modem to pc. Once I have the modem in the mix,it gets no/limited connectivity and cannot reach the setups. I have tried the classic 192.168.2.1 and 192.168.1.1 and about 5 other variations, along with 'http://router'. My router is a Belkin N300 Wireless N Router. If I use a command prompt and do 'ipconfig', there is no ip address beside 'gateway default' once the router is connected. I have reset my router to factory settings. I've tried using a static ip address for my computer [though not sure if i did it correctly]. My DHCP is enabled.
My computer keeps listing the internet connection as "limited". It does this randomly, I don't know when it will happen next. Restarting router/computer fixes it sometimes, but not all the time. Sometimes it takes about 4 restarts of the router until I get a proper connection. Trouble shooting merely describes the problem as having no connection and tells me to reconnect the router. This takes around 5 minutes each time and I'm getting tired of doing this, as it interrupts skype calls, games and conversations.
I have broadband from virgin media with one of their superhubs made by netgear, I have a CCTV DVR plugged into this using a regular cat5 cable, the DVR will allow you to view 4 cctv cameras via the internet,
Android and blackberry phones can both connect to the router using wifi, an IBM laptop running XP also has no problems, the only thing that does have a problem is a new Toshiba laptop running windows 8,
If the DVR is plugged into router before win 8 connects then the Windows 8 machine cannot log on using wifi, it gives message saying restricted access and has no internet access, if you unplug the DVR Windows 8 machine logs on fine you can then plug DVR back in and laptop can browse all day with no problems, if you log off then try and log on again you get the same restricted access message again ...
I bought an Asus G75vw couple days back with windows 8. Everything was working fine except that i couldn't connect to my wireless router. It had a WEP encryption. After I entered the Network Security key, I Kept on getting "Can't connect to this network", troubleshooting didn't work either. Then I updated all drivers from Asus support website and it connected after a restart. I was quite delighted but the next day again i got the "cant connect to this network" message. So I changed my encryption to WPA2-PSK (AES) and even updated the firmware of my router. Still no luck.
I am trying to change the ip address manually. to unbrick my router. so I go to my network and click properties to change the tcp ect. and the famous Unexpected error accured pops up. I try all the regsvr32 ect. stuff and nothing works. I have windows 8 pro.
I use a small usb modem for my internet access and using a usb wifi adaptor and a virtual wifi router I was able to share my internet around home quite affordably.
Every now and again the software 'virtualrouter' would cause a crash. Maybe once every 3 months.
When I updated to 8.1 the software no longer worked, nor did any other. What's more it cause a DPC-Watchdog violation within a few minutes.
When I say the software doesn't run, one of two things happen. My old program 'virtualrouter' runs as normal, but none of my devices can connect. The network is available, but connection is impossible.
With other programs I get told that the wifi adaptor is not enabled. Which it is.
Something has changed in the upgrade and I don't know what. Every option and test I've run and enabling of virtualisation says that it should work. But then the BSOD arrives.
I recently brought the netgear wireless router and i connect it to the my wired network and after i complete successfully about the settings of netgear and after that i check the internet speed at speedtest it shows almost 2mbps download speed and 1.5 mbps upload speed but when i put the a file to download the speed only changes in between 60 - 70 kbps actually it gives 200 to 250 kbps but it doesn't.....i really tired my best get normal speed but i didn't got that....
I have an Acer Aspire E1-572 laptop. Went to connect it to my router via an Ethernet cable but failed to have connection,It works okay on wifi but not on the Ethernet the square box don't show next to the clock.I have looked in device manager for any yellow exlamation marks and none to be seen.
I have a wireless router and am connecting 2 phones (wifi) and 1 PC (ethernet). The PC is running Windows 8 and has two User Accounts (I'll call them "Business" and "Personal").
Since setting up the router, the phones have connected over wifi without problem. If I log onto the "Personal" user account on my PC, it connects over ethernet, and the phones still work with wifi.
However, if I log my PC onto my "Business" user account, the PC says it has connected to the Home Hub via the ethernet cable, but there is no internet connection. It also causes the internet connection on the phones to drop (sometimes the wifi goes down completely, sometimes it says it's connected to wifi, but there is no internet). I don't think it's an ethernet problem either, as I connected my PC wirelessly instead of with the cable, and the same thing happens.
The PC only ever does this on the "Business" user account, the "Personal" account works fine (I'm using that now). Looked everywhere to find a solution, I assume it's something in the settings, rather than a router issue. Can't find the answer anywhere.