I did a Clean Install on a new SSD Drive. When I tried the Relocate User Profiles to another Partition, the System gave me a message that I would have to re-install, but the Windows 8 CD will not re-install. What can I do?
View 1 RepliesIs it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I am trying to do a clean install of windows 8 on my laptop (Elitebook 8770W) from a USB stick with original MS Windows OEM iso. Once I boot from usb stick, at the setup screen I enter the product key and then choose advanced to do a clean install. I then choose my hard disk partition to install windows but I get stuck here with this error:
"Windows cannot be installed to disk 0 partition 1"
I deleted the partition and choose to install on the unallocated space (150GIG) But still get the same error and when I click on the error this is what I get:
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's Bios"
In bios I have my disk set as Raid and I also have a m-sata Flash cache. If I change raid to AHCI I will be able then to install windows. But if I turn it back to raid after install I will no longer be able to boot I have to be in raid mode to use my m-sat as cache drive.
So here I am stuck not being able to install windows I even downloaded latest intel rapid storage technology drivers and put them on the usb stick with windows setup files. When i got the error I choose to load driver. But even after that I was getting same error and windows would not install on my HDD.
What's the right way to install in this condition (raid)?
I was having a problem since my computer shows "windows cannot delete the active system partition on this disk". How to delete the partition on which i have windows 7 installed.
Here is the screen shot ...
I tried to install 32 bit Windows 8 in my friends laptop through bootable usb. It has win7 preloaded. I tried for the dual boot. But when I select the partition drive it said that windows cannot be install in that drive because the selected drive is GPT partition style. How to install Windows 8 os in that GPT partition style hard drive.
Laptop has Hard disk-500 gb,64 bit win7.
While I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.
How can I stop the libraries and user folder from expanding when I open Explorer? I used your example and removed the libraries folder, but I did not see one for the user folder.
View 1 Replies View RelatedMy buddy wants me to relocate his Documents and Pictures folders (by going to Properties/Location tab/Move on those folders) so that they would be in his Google Drive folder, and thereby backed up automatically to the cloud.
View 9 Replies View RelatedWith Windows 8 there is no way (that I am aware of) to avoid having to create a user profile. So now I have my user profile and the stupid Public profile. For some reason some stuff gets put into the Public profile and some stuff is being put into my profile.
An example would be documents.
The majority of my documents are stored in Users/<name>/Documents yet for some reason there are a bunch of documents that I use being stored in Users/Public/Public Documents
Is there a way to merge these 2 folders and then get rid of the Public profile completely?
I've been getting this single warning since the very first boot after a clean install of Windows 8 Pro. This is the only warning I get along with 19 informationals that are easy to understand and logical.
Event ID 1530, User Profiles Services
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL - 1 user registry handles leaked from RegistryUserS-1-5-21-4208045085-1828888239-1443801484-1001:
Process 1028 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-
1-5-21-4208045085-1828888239-1443801484-1001SoftwareMicrosoftWindowsCurrentVersionUninstall
Windows 8 creates a roaming profile in the C:Users directory using xxxxxx_000 subdirectories for each Microsoft account which is created.
Apparently, these subdirectories are only temporary directories that are recreated each time a user logs on to Windows 8 via these accounts.
Is there a way to make sure that these profiles are completely deleted when the user logs off from his Microsoft account?
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
View 4 Replies View RelatedI partitioned my hard disk into a 150GB (C) and 500GB (D) and upgraded from Win7 to Windows 8 (and subsequently Windows 8.1 after the recent updates). The OS is installed onto the C Drive.
Performed a Clean Installation of Windows 8 on my C Drive. Under the Choose What To Keep Option, I selected Nothing.
Technically speaking my C Drive would have been wiped clean but after the Windows 8 installation, my C Drive only has 5GB of space left (145GB is being used). The Windows 8 OS is not detecting any of the old programs in my C Drive and the automated Disk Clean up feature only offers removal of temporary internet files. Which brings me to one possible assumption...
The Clean Installation Failed. Windows 8 simply installed itself again on my C Drive and the remaining disk space (containing my previous Windows 8.1 OS and programs) is locked down somewhere. I suspect this had something to do with changing my HD format 3 years ago when I wiped clean my pre-loaded ASUS laptop Win7 and partitioned it to install my Windows 8.
How to remove my previous OS?
I am attempting to install Windows 8 (I currently have Vista) but Autorun doesn't work and when I attempt to access the disk in the CD ROM I am asked if I want to format the empty disk. I recently had to reformat the hard drive back to its factory settings (Vista O/S) for reasons I won't go into. The problem isn't limited to the installation disk.
View 3 Replies View RelatedI have Win 7 installed on an SSD with all other files on separate disks. (User files, etc) Can I also install, to dual boot, Win 8 and point everything to the same user files on the same separate disks?
View 3 Replies View RelatedI recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself
Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
Lenovo g505 History - What I did so far, is further down Computer went badly wrong and would not Boot into Windows (belongs to my mates 11 year old) I decided to a Factory Restore it seemed the best Option as my knowledge stops, til now, at Win 7 I did it, but it doesnt Boot into Windows CURRENT I have the HDD connected to another computer which is running Win 7 I can now see that it did indeed do a Restore to the System Partition Pic Shows Disk in Disk Management
Pic shows content of Windows8 Drive
Pic shows content of the Windows8 Windows Folder
PDF of the 3 Pics - easy to read detail
In Disk Management I see 7 Partitions Now I think I understand what the Problem is - ?too many Partitions? But I dont have a clue how to Resolve it correctly My inclination is to Run DiskCheck from Win7 on the HDD but I am not sure if that will work on Windows 8? same with FixBoot if it is Possible? The LENOVO H Drive has 3 Folders with Data in it Lenovo & Drivers & Applications
HISTORY
I did the Restore
took 3 hours
but then said Success
Option to Reboot or Shutdown
Chose Reboot
eventualy Booted to a Windows Pale Blue screen with the Cursor half hour later, the Box came up to start the Restore again I did it, same as above time and Result so this time I chose Shut Down Started - Logo for long time then loading Files and back at the Box to Start Restore again
I have since tried booting with Default Options UEFI and Legacy in the BIOS In the middle of all this, as it is about 4 hours to do the restore.
accidentally i delete my efi partition. now i cannot boot up to windows 8
View 6 Replies View RelatedI have a dell laptop with win 8 on it that it came win. the recovery partitions are intact etc. only thing not intact is the OS partition. the recovery of course fails because of the partition missing.
Is there a command i can type in diskpart to recreate the partition and successfully restore the os with the recovery built in?
My disk situation is as in the attached screenshot. I have two Windows 8 installed on 2 different partitions of the same SSD. Now I would like to remove the first installation, Windows 8 (H: )
The problem is that the Windows 8 (H: ) partition is marked as System, Active so from reading the forum I know there may be some problems with bootmgr... but I can't understand exactly what to do.
im using acer aspire p3, and wish to install a clean Windows 8 cause the hard disk capacity just 58gb and system take around 30gb.
i try to install Windows 8 wif a usb drive inside window, but it seems giving me error: we count install Windows 8 to your pc
then i try to boot wif usb, and i found tat i cant install too because the main partition is oem reserved, any i dea i can install a new clean window?
I have a new HP envy t215 desktop with intel I7 Processor on a Megatrends MB with an EFI partition. The computer came with windows 7 pro but I want to temporally installWindows 8.
I want to remove the hard drive with Windows 7 Pro and insert a new 1TB Sata drive for a fresh install of windows 8. I have an almost new 1TB Sata WD hard drive formatted GPT/NTFS.I have completely wiped the hard drive. I will have to have the EFI partition on the windows hard drive.
The real question is will the windows 8 OEM software create the correct partitions when the system is installed.I know I need the EFI partition and the operating system partition at a minimum.
Need to move partition over, did a minimal image restore with my new laptop. What it does is skip the recovery partition setup. So instead of 4 partitons I have 3. The problem is the first partition is now a 401 mb unallocated partition, the second is the EFI partition, and c: drive is last. When attempting to move unallocated 401 mb to the end of drive, so I can extend it, the program I use, EaseUS partiton does not "see" the first 401 mb and intead shows 0.0 unallocated space. Because of this I cannot resize/move the partition. What other method is there to remedy the situation.
View 9 Replies View RelatedMy son's laptop (Windows 8) failed, and despite F9 options to reset or refresh, and CHKDSK was unable to recover the system due to bad disk sectors. I bought a new disk , but as I had made no recovery media, and the OEM doesn't supply any, I have no way of reinstalling Windows 8.
However I did mange to install Ubuntu Linux on the new disk and the Laptop is now working fine. Out of curiosity I connected the old bad disk via a USB enclosure, and lo and behold Disk utility was able to read the OEM Recovery and Restore partitions. I have made several copies of these on a Win 7 laptop, USB and LInux partitions, and all look good (as far as i can tell).
My issue is that as the OEM recovery partitions seem fine, I reckon they should be installable onto the new disk, but I am at a loss as to how I can use this data to reinstall Win 8 onto my laptop. Most of the advice I can see assumes a working copy of WIn 8 or having a retail Win 8 ISO, which of course I do not have. Remember , unlike Win 7, WIn 8 has no product key identifiable as it is contained in the BIOS somewhere, but I reckon it should recognise the OEM's recovery partition if I only could manage to load it.
I now have a sketchy knowledge of lots of new terms (mounting , partitioning, MBRs, boot sequences etc ) so exactly what to do. [ The tutorial on this form requires a retail win 8 ISO]. I did find a Linux method involcing DD, DDRESCUE , PARTPROBE etc ) which I have tried but all to no avail - I am sure I was close though! ]
I had a Windows 7 laptop until I decided to upgrade it to Windows 8. What I did was create a partition on the Windows 7 side and went through setting up the dual boot process with no problems. Now, after using Windows 8, I would like to expand the partition size on the Windows 8 side since I only created about 30GB and Windows 8 will become my primary. So, what I was wanting to know is how easy or difficult is it to resize he partition without corrupting the OS.The closest I found was from this link Dual Boot Windows 7 and Windows 8 - Delete Windows 7 which discusses how to delete the old Windows 7 partition. Would this work on reducing the Windows 7 partition as well? I am thinking it should? I have backed up both partitions using True Image and there really isn't any valuable data on the laptops, so not concerned about losing anything.
View 1 Replies View RelatedI want install another copy of windows 8 on another partition. This is useful in installing different group of programs so I boot the suitable one related to specific problems. Moreover you can delete a problem file from the other partition.
View 4 Replies View RelatedEarlier today, I decided to do a fresh install from my retail CD of Windows 8. Windows 8 was my existing OS. (I just wanted to start fresh). For some reason, it did not create the usual two additional small partitions (system reserved and one called recovery). Everything seemed to work alright, but was wondering why this happened (only the C: partition was created).
View 2 Replies View RelatedLenovo g505
History - What I did so far, is further down. Computer went badly wrong and would not Boot into Windows. I decided to a Factory Restore, it seemed the best Option as my knowledge stops, til now, at Win 7. I did it, but it doesnt Boot into Windows.
CURRENT
I have the HDD connected to another computer which is running Win 7
I can now see that it did indeed do a Restore to the System Partition
Pic Shows Disk in Disk Management
Pic shows content of Windows8 Drive
Pic shows content of the Windows8 Windows Folder
PDF 3 Pics to read Details
Lenovo hdd.pdf
In Disk Management I see 7 Partitions. Now I think I understand what the Problem is - ?too many Partitions? But I dont have a clue how to Resolve it correctly. My inclination is to Run DiskCheck from Win7 on the HDD but I am not sure if that will work on Windows 8? Same with FixBoot if it is Possible? The LENOVO H Drive has 3 Folders with Data in it Lenovo & Drivers & Applications.
HISTORY
I did the Restore, took 3 hours, but then said Success
Option to Reboot or Shutdown
Chose Reboot
Eventually Booted to a Windows Pale Blue screen with the Cursor half hour later, the Box came up to start the Restore again I did it, same as above time and Result so this time I chose Shut Down Started - Logo for long time then loading Files and back at the Box to Start Restore again I have since tried booting with Default Options UEFI and Legacy in the BIOS In the middle of all this, as it is about 4 hours to do the restore.
I get this error: when I try to clean install to a gpt format hdd. Haven't found setup txt yet.
This will be Windows 8 Pro on an HP Pavilion G7-2243us, 500 gb hitachi hdd, and 4 gb memory.