Unlock EFI Partition
Dec 27, 2013
I'm having a problem connecting my laptop to an external monitor. I've encountered this problem a few times now. My external monitor will just stop working one day, and the only way I've found to fix it is to delete the keys located in the EFI partition.
After the keys are deleted I can reset EFI in the BIOS and the monitor will then be detected by Windows. It's getting to be really annoying having to reset EFI every couple days. So, I decided to see if I could unlock the EFI partition and try to remedy this problem.
So far I managed to set the partition as a basic data partition using SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Next, I assigned it a drive letter. But if I try to explore the contents I get an error saying "I don't have permission".
How to assign the correct permissions??
View 5 Replies
ADVERTISEMENT
Feb 13, 2013
I logged into my microsoft account on my Windows 8 laptop and when i turn it on again, the laptop cant connect to my home wifi automatically so i cant log into my microsoft account on my laptop because it requires an internet connection. So I am now locked out of my laptop. I dont know what to do.
View 3 Replies
View Related
Nov 9, 2012
In Windows8 sl-SI, I have no option Add features to Windows. I think it is locked. Is it possible to unlock this feature?
View 9 Replies
View Related
Aug 1, 2014
I have an Asus T300LA Transformer with Windows 8.1. My keyboard stopped working so wanted to use the recovery utility, but when I get there it says my hard drive is locked and to unlock it. How do I do that?
View 5 Replies
View Related
Feb 16, 2014
When i don't use Windows 8 for about 20 minutes, it literally locks up and even though i can see the screen, the key board and mouse are functionless.
And all the while i thought it was my KVM switch, and so i disconnected the KVM mouse and keyboard, but continued using the screen KVM switch and that's when i realized, its not a KVM switch problem, its a Windows 8 problem or Windows 8 setting.
View 9 Replies
View Related
Aug 18, 2014
I have just tried to Refresh my Windows 8.1 installation, but when running the refresh Windows 8.1 came up with an error I have not seen before, let alone do the refresh.
It displayed a message saying "The Drive is Locked, you will have to unlock the drive to continue" so HOW do you unlock a Hard Drive?
How to do this before I either pull my hair out, or start from scratch and re-format the drive and do a complete new install of Windows 8.1
One thing I have done about a week ago which may be causing this problem is I converted the Drive from MBR to GPT and if this has locked the drive.
View 1 Replies
View Related
Sep 26, 2013
How can I unlock my hard drive from my command prompt? If I can do it using it. Because I try the auto repair, refresh my pc leaving everything intact, but when I did that it told me that my driver is lock. How do I unlock it using the advance options that the Windows 8 cd brings?. It said something about boot bcd.
View 1 Replies
View Related
Mar 2, 2013
I've setup my machine to enable PIN login (I find it quite convenient as the computer is 99% of the time in my home and 4 digit PIN is enough to discourage family from tinkering with my machine but easy enough to quickly unlock - I had 3 letter pass on my win 7) but I'm facing an issue - often, even tho I've previously selected PIN windows 8 default to password after computer wake up (even after short sleep) which is annoying because of muscle memory (swipe lockscreen, enter pin - when it's password I have to remove it, change to PIN and so on).
How to force using PIN by default at every login/unlock?
View 4 Replies
View Related
Feb 20, 2014
I somehow locked the keyboard on an hp 3125 netbook that runs Windows 8. What is the command to unlock the keyboard? I tried the fn(function keys) with no success.
View 1 Replies
View Related
May 18, 2014
I have a Microsoft Surface Pro 2 and I am running Windows 8.1 Pro Update 1.
I have been unsuccessful at building a WinPE image that provides BitLocker support. I searched around the internet and found many posts. Eventually, I ended up trying to build it with the various added packages I discovered in the various posts. However, in the end, none worked and this is the message I am getting after booting into my WinPE environment:
manage-bde.exe - Application Error
The instruction at 0xa20afa3b referenced memory at 0x0000013d.
The memory could not be read.
Click on OK to terminate the program
Here are the commands I eventually ended up using to build my WinPE image:
Code: dism /image:C:Bootmacriummount /add-package /packagepath:"C:Program Files (x86)Windows Kits8.1Assessment and Deployment KitWindows Preinstallation Environmentamd64WinPE_OCsWinPE-WMI.cab"dism /image:C:Bootmacriummount /add-package /packagepath:"C:Program Files (x86)Windows Kits8.1Assessment and Deployment KitWindows Preinstallation Environment
[Code] ....
But even with all that included, I still have the same error about the memory.
Will WinPE 5.0 x64 bootable environment work on a TPM-enabled machine? If so, how did you build your custom WinPE environment?
View 1 Replies
View Related
Mar 4, 2014
I have a Gateway laptop running Windows 8. I have an auto diagnostics program called Auto Enginuity that I have "add ons" purchased for, when I type to put in the feature unlock key, after a couple days it will no longer be activated. Then when I installed the 8.1 update it will no longer accept the activation key, I can type the key in and it does not hold it. On the same note, I'm running Microsoft Streets and Trips gps software and when I go to update it,it updates like normal but after the update it still says update needed, like it doesn't "hold" any updates or key codes that I install.
View 1 Replies
View Related
Sep 28, 2013
I can't get the custom sounds that I've set are not working. I do have the custom startup soind working but that's it.
View 1 Replies
View Related
Mar 24, 2013
Trying to unlock a flash drive which is in write protected mode in Windows 8. There is no protect switch on the side of the drive.
View 1 Replies
View Related
Jul 17, 2014
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
View 9 Replies
View Related
Jan 30, 2013
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
View 9 Replies
View Related
Aug 10, 2014
I would like to add a partition to a drive having the following partitions:
Number Partition Size 1 Windows RE 499 MB 2 EFI System 300 MB 3 MSR 128 MB 4 C: 216 GB 5 Windows RE 450 MB 6 Samsung Image 19 GB 7 Samsung Recovery 1 GB
This should be easy to do with MiniTool Partition Wizard. In essence, resize "C:", add the partition in the unallocated space, assign the drive letter "D" to the new partition, and format it to NTFS.
You will notice that the drive has two Windows RE partitions. This is because I updated to Windows 8.1 from Windows 8 through the Microsoft Store.
View 9 Replies
View Related
Dec 12, 2013
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
View 3 Replies
View Related
Jul 22, 2013
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
View 1 Replies
View Related
Oct 14, 2013
I want to create a second primary partition on my first harddisk(disk 0 look at picture)
from the free space there in the extended partition(view screenshot). Now my problem is that whenever I want to create a new partition by right clicking and selecting "New Simple Volume" and selecting the formatting etc, I get another logical drive in the extended partition(look at picture below).
Is is not what I want. I want to move that free space out from the extended partition and add the unallocated 9 MB to it and then create a second primary partition on disk 0.
Note: If its possible I want to do this without using any third party software, IF POSSIBLE.
View 4 Replies
View Related
Feb 27, 2013
This is my basic spread prime contains a win 7 installation(active) halo contains a win 8 installation(boot) and is a logical partition What I need to do is: format prime and combine it with halo , this will be my boot and active keep logic and halo as it is an my logical drives I cannot lose data in halo or logic. how do I go about doing this ..
View 2 Replies
View Related
Oct 31, 2013
I have both windows 7 and windows 8 and I would like to have each operating system on a different partition (or even on a separate hard drive if it isn't possible). My windows 7 is 32 bit and I have both 32 and 64 bit of win8. The Windows 8 is a OEM system builder version. Is it possible to have both a 32 bit and a 64 bit on the same drive (partitioned of course) If not, would installing it on a separate hard drive work? My final question is: if I can get win 8 and Win 7 on my computer, could I still use some of the Win 7 software with windows 8 or would I have to download another version? I am using a Fujitsu lifebook T730, corsair ssd as primary drive, and a HHD in my disk drive bay.
View 4 Replies
View Related
Jun 27, 2013
I am trying to partition 25 Gigabytes of my hard drive to dual-boot Ubuntu, but when I go to "Shrink Volume" and try to shrink my C: drive, I can only shrink around half a gigabyte. I defragged it and it still won't shrink more than that. It is a 440GB drive and I still have 298GB free.
View 2 Replies
View Related
Feb 22, 2013
I just looked at the disk manager, and I see this:
I am not sure what those 19 gb are.. and is there a way to get them back ? If I right click on it only gives me an option to delete..
View 9 Replies
View Related
Apr 7, 2013
I recently shrank my had drive and made a data partition. I then did a factory restore and installed windows on the c partition. Everything seemed to go well. I now can not see the D partition. It only shows up in Computer Management. It will not allow me to do anything with it. It is calling it OEM partition. What do I need to do to recover this?
View 8 Replies
View Related
Sep 22, 2012
I recently made a partition for the (forget the exact name) but the I guess demo version of Windows 8. I will just upgrade to Windows 8 when it comes out. Is there a way to get rid of that partition, and just have my hard drive back to the way it was?
View 7 Replies
View Related
Jun 1, 2014
I have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
View 3 Replies
View Related
Jan 25, 2014
Any decent free/low-cost software package for recovering data from an NTFS partition? My Windows 8 has gone down and I suspect the file system has become corrupted.
View 5 Replies
View Related
Jan 29, 2013
i brought an HP Pavilion G6 and it comes with an GUID partition table (GPT), EFI and Secure Boot. However i need an MBR partition table, so i tried disk managerment but the option "convert to mbr" is greyed out and when i run the "diskpart - list disk - select disk 0 - convert mbr" i get an error "cannot convert a partition which has a pagefile on it" (disabling the pagefile didn t worked).
I guess my only other option is to format it, but the notepad comes with an lincesed Windows 8 which i dont wont to loose. So what are my options? I dont ave the CDs, as it s HP packet.
Update:I ve successfully formatted my Notebook. All i had to do is enter legacy mode, disable secure boot and boot from the Windows 7 DVD. So if you ave no intention using Win 8 it won t be a problem to "downgrade" in an UEFI/EFI System.
View 9 Replies
View Related
Sep 15, 2014
i have Ultrabook Dell XPS 15 (Touch screen)
with 2 hard drivers (500GB SATA+ 32GB SSD )
now the question, when i re install windows 8.1
how i can partition the 32 SSD hard drive
should i install windows on it ? or just use it a a normal partition ?
View 9 Replies
View Related
Jan 23, 2014
A Dell technician replaced a new motherboard. Then, Windows 8 was restored using a provided Windows 8 recovery media DVD. Now, windows 8 runs super.
What I now found was that the original recovery partitions were disappeared. in the main hard drive.
I could not create a recovery drive (in flash drive) without recovery partitions in hard drive.
Is there a way to re-create the original recovery partitions ? If so, how?
View 9 Replies
View Related
Sep 15, 2014
Have noticed that my hard drive has 6 partitions
Acer 914gb Ntfs
350mb healthy
300mb healthy
450mb healthy
15.51mb healthy
400mb healthy
I am following instructions to install ubuntu along side windows 8.1 the instructions say that you should only have upto 4 max partitions how can i delete these partitions down to as when you right click there is no way to delete.
Also which ones are safe to delete ...
I am using a acer laptop 2.4ghz 6gig ram 64bit ...
View 2 Replies
View Related
